Define IO addresses in a single place, to make it easier to change for
non-standard memory maps.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Make the WT entry match table 4-52 of the Xtensa ISA RM (RD-2012.5).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

there is a small possibility that wake_up of softirq thread
happens between local_irq_enable() and set_cpu_online(). In
this case affinity of the thread changes to fallback affinity
(i.e. CPU0). This may be a source of problems.

The patch kills that possibility.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

This removes the XTENSA_ISS_NETWORK Kconfig parameter,
which was no longer used anywhere in the source code
and Makefiles.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

The 32 bit sched_clock interface now supports 64 bits. Upgrade
to the 64 bit function to allow us to remove the 32 bit
registration interface.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This is largely based on SMP code from the xtensa-2.6.29-smp tree by
Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly
other Tensilica folks).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

MX is an interrupt distributor used in some SMP-capable xtensa
configurations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

PIC irq_ack doesn't clear timer IRQ, because timer interrupt handler
usually set up new timer by writing to ccompare register and thus
clearing timer IRQ. However timer may not be set up in the IRQ handler,
e.g. with tickless idle on SMP, or when CPU is going offline, leaving
timer IRQ raised and making do_interrupt attempting to handle it
forever.

To fix this always write current value of ccompare SR chosen to be linux
timer back to that SR on entry to timer interrupt handler.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

- set up irq registers and call irq_enter/irq_exit once for each kernel
  entry due to interrupt;
- don't attempt to clear current IRQ in the do_interrupt, IRQ handler
  will take care of it;
- find pending interrupt with highest priority before every ISR
  invocation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Extract xtensa built-in interrupt controller implementation from
xtensa/kernel/irq.c and move it to other irqchips, providing way to
instantiate it from the device tree.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Secondary CPUs need this declaration to initialize their MMUs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Otherwise exceptions may occur prior to exception handling mechanism
initialization, resulting in silently dead system.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Provide per-cpu ccount_timer objects and use them appropriately.
Extract per-cpu clockevent setup function.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This allows ccount to be used as highres timer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Avoid __delay counter underflow for loop counts < 2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This fixes the following build warnings:

arch/xtensa/mm/misc.S: Assembler messages:
arch/xtensa/mm/misc.S:143: Warning: value 0xffffffff30000106 truncated to 0x30000106
arch/xtensa/mm/misc.S:197: Warning: value 0xffffffff30000106 truncated to 0x30000106
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

These definitions (-1) were correct when used as a hardware IRQ number,
but are incorrect as a mapped IRQ number.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This enables the set_robust_list(2) system call.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

The code doesn't handle dynamic TAP interface allocation, so there's no
point tracking this case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

This allows changing MAC address of the device.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Without proper MAC setup network device doesn't work. IP setup is
redundant and may be done with 'ip=...' kernel parameter.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Now 'ethX=...' syntax can actually be used in kernel command line to
specify network interfaces.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

No functional changes, remove dead/unused code, clean checkpatch warnings,
replace strlen of constant strings with sizeof.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

- drop unused PHYSICAL_MEMORY_ADDRESS and XC_PADDR
- fix NMI_VECTOR_VADDR and INTLEVEL7_VECTOR_VADDR definitions: there
  should be no XCHAL_ prefix in them;
- fix the following warning seen with gcc-4.8.1:

  arch/xtensa/include/asm/vectors.h:71:5: warning: "XCHAL_HAVE_VECBASE" is not defined [-Wundef]
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Pull ARM SoC fixes from Olof Johansson:
 "Another smallish batch of fixes, it's been quiet due to the holidays.
  Nothing controversial here, a handful of things across the board"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: pxa: fix USB gadget driver compilation regression
  ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
  ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
  ARM: shmobile: r8a7790: fix shdi resource sizes
  ARM: shmobile: bockw: fixup DMA mask
  ARM: shmobile: armadillo: Add PWM backlight power supply

Pull x86 fixes from Peter Anvin:
 "There is a small EFI fix and a big power regression fix in this batch.

  My queue also had a fix for downing a CPU when there are insufficient
  number of IRQ vectors available, but I'm holding that one for now due
  to recent bug reports"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Don't select EFI from certain special ACPI drivers
  x86 idle: Repair large-server 50-watt idle-power regression

Pull ACPI and power management fixes and new device IDs from Rafael Wysocki:

 - Fix for a cpufreq regression causing stale sysfs files to be left
   behind during system resume if cpufreq_add_dev() fails for one or
   more CPUs from Viresh Kumar.

 - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be
   ignored when the intel_pstate driver is used from Jason Baron.

 - System suspend fix for a memory leak in pm_vt_switch_unregister()
   that forgot to release objects after removing them from
   pm_vt_switch_list.  From Masami Ichikawa.

 - Intel Valley View device ID and energy unit encoding update for the
   (recently added) Intel RAPL (Running Average Power Limit) driver from
   Jacob Pan.

 - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power
   Subsystem (LPSS) ACPI driver from Paul Drews.

* tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap / RAPL: add support for ValleyView Soc
  PM / sleep: Fix memory leak in pm_vt_switch_unregister().
  cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers
  cpufreq: remove sysfs files for CPUs which failed to come back after resume
  ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs

Merge tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Fix a regression for wrong interrupt numbers for some devices after
the sparse IRQ conversion, fix DRA7 console output for earlyprintk,
and fix the LDP LCD backlight when DSS is built into the kernel and
not as a loadable module.

* tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
  ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
  + v3.13-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman:
Second Round of Renesas ARM based SoC Fixes for v3.13

* r8a7790 (R-Car H2) based Lager board
  - Correct SHDI resource sizes
    This bug has been present since sdhi resources were added to the r8a7790 by
    8c9b1aa4 ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT
    templates") in v3.11-rc2.

* r8a7778 (R-Car M1) based Bock-W board
  - Correct DMA mask
    This resolves a regression introduced by 4dcfa600
    ("ARM: DMA-API: better handing of DMA masks for coherent allocations")
    in v3.12-rc1.

* r8a7740 (R-Mobile A1) based Armadillo board
  - Add PWM backlight power supply
    This resolves a regression introduced by 22ceeee1
    ("pwm-backlight: Add power supply support") in v3.12.

* tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: fix shdi resource sizes
  ARM: shmobile: bockw: fixup DMA mask
  ARM: shmobile: armadillo: Add PWM backlight power supply
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>

After commit 88f718e3
"ARM: pxa: delete the custom GPIO header" a compilation
error was introduced in the PXA25x gadget driver.
An attempt to fix the problem was made in
commit b144e4ab
"usb: gadget: fix pxa25x compilation problems"
by explictly stating the driver needs the <mach/hardware.h>
header, which solved the compilation for a few boards,
such as the pxa255-idp and its defconfig.

However the Lubbock board has this special clause in
drivers/usb/gadget/pxa25x_udc.c:

This include file has an implicit dependency on
<mach/irqs.h> having been included before <mach/lubbock.h>
was included.

Before commit 88f718e3
"ARM: pxa: delete the custom GPIO header" this implicit
dependency for the pxa25x_udc compile on the Lubbock was
satisfied by <linux/gpio.h> implicitly including
<mach/gpio.h> which was in turn including <mach/irqs.h>,
apart from the earlier added <mach/hardware.h>.

Fix this by having the PXA25x <mach/lubbock.h> explicitly
include <mach/irqs.h>.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-v3.13-rc/hwmod-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into debug-ll-and-ldp-backlight-fix

A few OMAP hwmod fixes for v3.13-rc.  One patch fixes some IRQ
problems with GPMC, RNG, and ISP/IVA MMUs on OMAP2/3.  The other fixes
some problems with DEBUG_LL on DRA7xx.

Basic build, boot, and PM test logs are available here:

http://www.pwsan.com/omap/testlogs/hwmod_fixes_b_v3.13-rc/20131226021920/