- 22 Jan, 2019 40 commits
-
-
Kees Cook authored
commit 5631e857 upstream. Yue Hu noticed that when parsing device tree the allocated platform data was never freed. Since it's not used beyond the function scope, this switches to using a stack variable instead. Reported-by:
Yue Hu <huyue2@yulong.com> Fixes: 35da6094 ("pstore/ram: add Device Tree bindings") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 3f1bb6ab upstream. Use the new of_get_compatible_child() helper to look up child nodes to avoid ever matching non-child nodes elsewhere in the tree. Also fix up the related struct device_node leaks. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Cc: stable <stable@vger.kernel.org> # 4.19: 36156f92 Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paul Burton authored
commit 16fd20aa upstream. When building using GCC 4.7 or older, -ffunction-sections & the -pg flag used by ftrace are incompatible. This causes warnings or build failures (where -Werror applies) such as the following: arch/mips/generic/init.c: error: -ffunction-sections disabled; it makes profiling impossible This used to be taken into account by the ordering of calls to cc-option from within the top-level Makefile, which was introduced by commit 90ad4052 ("kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7"). Unfortunately this was broken when the CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to Kconfig in commit e85d1d65 ("kbuild: test dead code/data elimination support in Kconfig"), because the flags used by this check no longer include -pg. Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building using GCC 4.7 or older. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: e85d1d65 ("kbuild: test dead code/data elimination support in Kconfig") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Adit Ranadive authored
commit 6325e01b upstream. Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device opcodes explicitly. Reported-by:
Ruishuang Wang <ruishuangw@vmware.com> Fixes: 9a59739b ("IB/rxe: Revise the ib_wr_opcode enum") Cc: stable@vger.kernel.org Reviewed-by:
Bryan Tan <bryantan@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
Adit Ranadive <aditr@vmware.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
commit a9666c1c upstream. Unsafe global rkey is considered dangerous because it exposes memory registered for all memory in the system. Only users with a QP on the same PD can use the rkey, and generally those QPs will already know the value. However, out of caution, do not expose the value to unprivleged users on the local system. Require CAP_NET_ADMIN instead. Cc: <stable@vger.kernel.org> # 4.16 Fixes: 29cf1351 ("RDMA/nldev: provide detailed PD information") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Sakari Ailus authored
commit 7fe9f01c upstream. The num_planes field in struct v4l2_pix_format_mplane is used in a loop before validating it. As the use is printing a debug message in this case, just cap the value to the maximum allowed. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jonathan Hunter authored
commit ac4ca4b9 upstream. The tps6586x driver creates an irqchip that is used by its various child devices for managing interrupts. The tps6586x-rtc device is one of its children that uses the tps6586x irqchip. When using the tps6586x-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. Disabling non-boot CPUs ... Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up tps6586x 3-0034: failed to read interrupt status tps6586x 3-0034: failed to read interrupt status The reason why the tps6586x interrupt status cannot be read is because the tps6586x interrupt is not masked during suspend and when the tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the tps6586x interrupt status. The tps6586x-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent tps6586x interrupt. However, the tps6586x-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the tps6586x must disable it's interrupt instead. Prevent the tps6586x interrupt handler from executing on exiting suspend before the i2c controller has been resumed by disabling the tps6586x interrupt on entering suspend and re-enabling it on resuming from suspend. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Julia Lawall authored
commit 28b170e8 upstream. Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Cc: stable@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Zhenyu Wang authored
commit 51b00d85 upstream. This is to fix missed mmap range check on vGPU bar2 region and only allow to map vGPU allocated GMADDR range, which means user space should support sparse mmap to get proper offset for mmap vGPU aperture. And this takes care of actual pgoff in mmap request as original code always does from beginning of vGPU aperture. Fixes: 659643f7 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT") Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com> Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com> Cc: stable@vger.kernel.org # v4.10+ Reviewed-by:
Hang Yuan <hang.yuan@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Hauke Mehrtens authored
commit 2b4dba55 upstream. This makes SMP on the vrx200 work again, by removing all the MIPS CPU interrupt specific code and making it fully use the generic MIPS CPU interrupt controller. The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU interrupts and also the IPI interrupts which are used to communication between the CPUs in a SMP system. The generic interrupt code was already used before but the interrupt vectors were overwritten again when we called set_vi_handler() in the lantiq interrupt driver and we also provided our own plat_irq_dispatch() function which overwrote the weak generic implementation. Now the code uses the generic handler for the MIPS CPU interrupts including the IPI interrupts and registers a handler for the CPU interrupts which are handled by the lantiq ICU with irq_set_chained_handler() which was already called before. Calling the set_c0_status() function is also not needed any more because the generic MIPS CPU interrupt already activates the needed bits. Fixes: 1eed4004 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support") Cc: stable@kernel.org # v4.12 Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Rafał Miłecki authored
commit 321c46b9 upstream. So far we never had any device registered for the SoC. This resulted in some small issues that we kept ignoring like: 1) Not working GPIOLIB_IRQCHIP (gpiochip_irqchip_add_key() failing) 2) Lack of proper tree in the /sys/devices/ 3) mips_dma_alloc_coherent() silently handling empty coherent_dma_mask Kernel 4.19 came with a lot of DMA changes and caused a regression on bcm47xx. Starting with the commit f8c55dc6 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") DMA coherent allocations just fail. Example: [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded The bgmac driver also triggers a WARNING: [ 0.959486] ------------[ cut here ]------------ [ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4 [ 0.973751] Modules linked in: [ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0 [ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47 [ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f [ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000 [ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8 [ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000 [ 1.025804] ... [ 1.028325] Call Trace: [ 1.030875] [<8000aef8>] show_stack+0x58/0x100 [ 1.035513] [<8001f8b4>] __warn+0xe4/0x118 [ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64 [ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4 [ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590 [ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70 [ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8 [ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec [ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0 [ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218 [ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c [ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44 [ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0 [ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218 [ 1.099886] [<803a082c>] kernel_init+0x10/0x104 [ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c [ 1.110107] ---[ end trace f441c0d873d1fb5b ]--- This patch setups a "struct device" (and passes it to the bcma) which allows fixing all the mentioned problems. It'll also require a tiny bcma patch which will follow through the wireless tree & its maintainer. Fixes: f8c55dc6 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Arnd Bergmann authored
commit 5a9372f7 upstream. While reading through the sysvipc implementation, I noticed that the n32 semctl/shmctl/msgctl system calls behave differently based on whether o32 support is enabled or not: Without o32, the IPC_64 flag passed by user space is rejected but calls without that flag get IPC_64 behavior. As far as I can tell, this was inadvertently changed by a cleanup patch but never noticed by anyone, possibly nobody has tried using sysvipc on n32 after linux-3.19. Change it back to the old behavior now. Fixes: 78aaf956 ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ivan Mironov authored
commit 44759979 upstream. Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may fail if device responds to MODE SENSE command with DPOFUA flag set, and then checks this flag to be not set on MODE SELECT command. In this scenario, when trying to change cache_type, write always fails: # echo "none" >cache_type bash: echo: write error: Invalid argument And following appears in dmesg: [13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current] [13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC PARAMETER field in the mode parameter header: ... The write protect (WP) bit for mode data sent with a MODE SELECT command shall be ignored by the device server. ... The DPOFUA bit is reserved for mode data sent with a MODE SELECT command. ... The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved and shall be set to zero. [mkp: shuffled commentary to commit description] Cc: stable@vger.kernel.org Signed-off-by:
Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stanley Chu authored
commit 3f7e62bb upstream. The commit 356fd266 ("scsi: Set request queue runtime PM status back to active on resume") fixed up the inconsistent RPM status between request queue and device. However changing request queue RPM status shall be done only on successful resume, otherwise status may be still inconsistent as below, Request queue: RPM_ACTIVE Device: RPM_SUSPENDED This ends up soft lockup because requests can be submitted to underlying devices but those devices and their required resource are not resumed. For example, After above inconsistent status happens, IO request can be submitted to UFS device driver but required resource (like clock) is not resumed yet thus lead to warning as below call stack, WARN_ON(hba->clk_gating.state != CLKS_ON); ufshcd_queuecommand scsi_dispatch_cmd scsi_request_fn __blk_run_queue cfq_insert_request __elv_add_request blk_flush_plug_list blk_finish_plug jbd2_journal_commit_transaction kjournald2 We may see all behind IO requests hang because of no response from storage host or device and then soft lockup happens in system. In the end, system may crash in many ways. Fixes: 356fd266 (scsi: Set request queue runtime PM status back to active on resume) Cc: stable@vger.kernel.org Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Kees Cook authored
commit 9474f4e7 upstream. It's possible that a pid has died before we take the rcu lock, in which case we can't walk the ancestry list as it may be detached. Instead, check for death first before doing the walk. Reported-by: syzbot+a9ac39bf55329e206219@syzkaller.appspotmail.com Fixes: 2d514487 ("security: Yama LSM") Cc: stable@vger.kernel.org Suggested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Josef Bacik authored
commit 74d5d229 upstream. If we flip read-only before we initiate writeback on all dirty pages for ordered extents we've created then we'll have ordered extents left over on umount, which results in all sorts of bad things happening. Fix this by making sure we wait on ordered extents if we have to do the aborted transaction cleanup stuff. generic/475 can produce this warning: [ 8531.177332] WARNING: CPU: 2 PID: 11997 at fs/btrfs/disk-io.c:3856 btrfs_free_fs_root+0x95/0xa0 [btrfs] [ 8531.183282] CPU: 2 PID: 11997 Comm: umount Tainted: G W 5.0.0-rc1-default+ #394 [ 8531.185164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8531.187851] RIP: 0010:btrfs_free_fs_root+0x95/0xa0 [btrfs] [ 8531.193082] RSP: 0018:ffffb1ab86163d98 EFLAGS: 00010286 [ 8531.194198] RAX: ffff9f3449494d18 RBX: ffff9f34a2695000 RCX:0000000000000000 [ 8531.195629] RDX: 0000000000000002 RSI: 0000000000000001 RDI:0000000000000000 [ 8531.197315] RBP: ffff9f344e930000 R08: 0000000000000001 R09:0000000000000000 [ 8531.199095] R10: 0000000000000000 R11: ffff9f34494d4ff8 R12:ffffb1ab86163dc0 [ 8531.200870] R13: ffff9f344e9300b0 R14: ffffb1ab86163db8 R15:0000000000000000 [ 8531.202707] FS: 00007fc68e949fc0(0000) GS:ffff9f34bd800000(0000)knlGS:0000000000000000 [ 8531.204851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8531.205942] CR2: 00007ffde8114dd8 CR3: 000000002dfbd000 CR4:00000000000006e0 [ 8531.207516] Call Trace: [ 8531.208175] btrfs_free_fs_roots+0xdb/0x170 [btrfs] [ 8531.210209] ? wait_for_completion+0x5b/0x190 [ 8531.211303] close_ctree+0x157/0x350 [btrfs] [ 8531.212412] generic_shutdown_super+0x64/0x100 [ 8531.213485] kill_anon_super+0x14/0x30 [ 8531.214430] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8531.215539] deactivate_locked_super+0x29/0x60 [ 8531.216633] cleanup_mnt+0x3b/0x70 [ 8531.217497] task_work_run+0x98/0xc0 [ 8531.218397] exit_to_usermode_loop+0x83/0x90 [ 8531.219324] do_syscall_64+0x15b/0x180 [ 8531.220192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 8531.221286] RIP: 0033:0x7fc68e5e4d07 [ 8531.225621] RSP: 002b:00007ffde8116608 EFLAGS: 00000246 ORIG_RAX:00000000000000a6 [ 8531.227512] RAX: 0000000000000000 RBX: 00005580c2175970 RCX:00007fc68e5e4d07 [ 8531.229098] RDX: 0000000000000001 RSI: 0000000000000000 RDI:00005580c2175b80 [ 8531.230730] RBP: 0000000000000000 R08: 00005580c2175ba0 R09:00007ffde8114e80 [ 8531.232269] R10: 0000000000000000 R11: 0000000000000246 R12:00005580c2175b80 [ 8531.233839] R13: 00007fc68eac61c4 R14: 00005580c2175a68 R15:0000000000000000 Leaving a tree in the rb-tree: 3853 void btrfs_free_fs_root(struct btrfs_root *root) 3854 { 3855 iput(root->ino_cache_inode); 3856 WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree)); CC: stable@vger.kernel.org Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> [ add stacktrace ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
David Sterba authored
commit 77b7aad1 upstream. This reverts commit e73e81b6. This patch causes a few problems: - adds latency to btrfs_finish_ordered_io - as btrfs_finish_ordered_io is used for free space cache, generating more work from btrfs_btree_balance_dirty_nodelay could end up in the same workque, effectively deadlocking 12260 kworker/u96:16+btrfs-freespace-write D [<0>] balance_dirty_pages+0x6e6/0x7ad [<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90 [<0>] btrfs_finish_ordered_io+0x3da/0x770 [<0>] normal_work_helper+0x1c5/0x5a0 [<0>] process_one_work+0x1ee/0x5a0 [<0>] worker_thread+0x46/0x3d0 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff Transaction commit will wait on the freespace cache: 838 btrfs-transacti D [<0>] btrfs_start_ordered_extent+0x154/0x1e0 [<0>] btrfs_wait_ordered_range+0xbd/0x110 [<0>] __btrfs_wait_cache_io+0x49/0x1a0 [<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0 [<0>] commit_cowonly_roots+0x215/0x2b0 [<0>] btrfs_commit_transaction+0x37e/0x910 [<0>] transaction_kthread+0x14d/0x180 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff And then writepages ends up waiting on transaction commit: 9520 kworker/u96:13+flush-btrfs-1 D [<0>] wait_current_trans+0xac/0xe0 [<0>] start_transaction+0x21b/0x4b0 [<0>] cow_file_range_inline+0x10b/0x6b0 [<0>] cow_file_range.isra.69+0x329/0x4a0 [<0>] run_delalloc_range+0x105/0x3c0 [<0>] writepage_delalloc+0x119/0x180 [<0>] __extent_writepage+0x10c/0x390 [<0>] extent_write_cache_pages+0x26f/0x3d0 [<0>] extent_writepages+0x4f/0x80 [<0>] do_writepages+0x17/0x60 [<0>] __writeback_single_inode+0x59/0x690 [<0>] writeback_sb_inodes+0x291/0x4e0 [<0>] __writeback_inodes_wb+0x87/0xb0 [<0>] wb_writeback+0x3bb/0x500 [<0>] wb_workfn+0x40d/0x610 [<0>] process_one_work+0x1ee/0x5a0 [<0>] worker_thread+0x1e0/0x3d0 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff Eventually, we have every process in the system waiting on balance_dirty_pages(), and nobody is able to make progress on page writeback. The original patch tried to fix an OOM condition, that happened on 4.4 but no success reproducing that on later kernels (4.19 and 4.20). This is more likely a problem in OOM itself. Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/Reported-by:
Chris Mason <clm@fb.com> CC: stable@vger.kernel.org # 4.18+ CC: ethanlien <ethanlien@synology.com> Signed-off-by:
-
Juergen Gross authored
commit 867cefb4 upstream. Commit f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") broke Xen guest time handling across migration: [ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 187.251137] OOM killer disabled. [ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 187.252299] suspending xenstore... [ 187.266987] xen:grant_table: Grant tables using version 1 layout [18446743811.706476] OOM killer enabled. [18446743811.706478] Restarting tasks ... done. [18446743811.720505] Setting capacity to 16777216 Fix that by setting xen_sched_clock_offset at resume time to ensure a monotonic clock value. [boris: replaced pr_info() with pr_info_once() in xen_callback_vector() to avoid printing with incorrect timestamp during resume (as we haven't re-adjusted the clock yet)] Fixes: f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") Cc: <stable@vger.kernel.org> # 4.11 Reported-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Christophe Leroy authored
commit 1bea445b upstream. [ 2.364486] WARNING: CPU: 0 PID: 60 at ./arch/powerpc/include/asm/io.h:837 dma_nommu_map_page+0x44/0xd4 [ 2.373579] CPU: 0 PID: 60 Comm: cryptomgr_test Tainted: G W 4.20.0-rc5-00560-g6bfb52e23a00-dirty #531 [ 2.384740] NIP: c000c540 LR: c000c584 CTR: 00000000 [ 2.389743] REGS: c95abab0 TRAP: 0700 Tainted: G W (4.20.0-rc5-00560-g6bfb52e23a00-dirty) [ 2.400042] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24042204 XER: 00000000 [ 2.406669] [ 2.406669] GPR00: c02f2244 c95abb60 c6262990 c95abd80 0000256a 00000001 00000001 00000001 [ 2.406669] GPR08: 00000000 00002000 00000010 00000010 24042202 00000000 00000100 c95abd88 [ 2.406669] GPR16: 00000000 c05569d4 00000001 00000010 c95abc88 c0615664 00000004 00000000 [ 2.406669] GPR24: 00000010 c95abc88 c95abc88 00000000 c61ae210 c7ff6d40 c61ae210 00003d68 [ 2.441559] NIP [c000c540] dma_nommu_map_page+0x44/0xd4 [ 2.446720] LR [c000c584] dma_nommu_map_page+0x88/0xd4 [ 2.451762] Call Trace: [ 2.454195] [c95abb60] [82000808] 0x82000808 (unreliable) [ 2.459572] [c95abb80] [c02f2244] talitos_edesc_alloc+0xbc/0x3c8 [ 2.465493] [c95abbb0] [c02f2600] ablkcipher_edesc_alloc+0x4c/0x5c [ 2.471606] [c95abbd0] [c02f4ed0] ablkcipher_encrypt+0x20/0x64 [ 2.477389] [c95abbe0] [c02023b0] __test_skcipher+0x4bc/0xa08 [ 2.483049] [c95abe00] [c0204b60] test_skcipher+0x2c/0xcc [ 2.488385] [c95abe20] [c0204c48] alg_test_skcipher+0x48/0xbc [ 2.494064] [c95abe40] [c0205cec] alg_test+0x164/0x2e8 [ 2.499142] [c95abf00] [c0200dec] cryptomgr_test+0x48/0x50 [ 2.504558] [c95abf10] [c0039ff4] kthread+0xe4/0x110 [ 2.509471] [c95abf40] [c000e1d0] ret_from_kernel_thread+0x14/0x1c [ 2.515532] Instruction dump: [ 2.518468] 7c7e1b78 7c9d2378 7cbf2b78 41820054 3d20c076 8089c200 3d20c076 7c84e850 [ 2.526127] 8129c204 7c842e70 7f844840 419c0008 <0fe00000> 2f9e0000 54847022 7c84fa14 [ 2.533960] ---[ end trace bf78d94af73fe3b8 ]--- [ 2.539123] talitos ff020000.crypto: master data transfer error [ 2.544775] talitos ff020000.crypto: TEA error: ISR 0x20000000_00000040 [ 2.551625] alg: skcipher: encryption failed on test 1 for ecb-aes-talitos: ret=22 IV cannot be on stack when CONFIG_VMAP_STACK is selected because the stack cannot be DMA mapped anymore. This patch copies the IV into the extended descriptor. Fixes: 4de9d0b5 ("crypto: talitos - Add ablkcipher algorithms") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Christophe Leroy authored
commit c56c2e17 upstream. This patch moves the mapping of IV after the kmalloc(). This avoids having to unmap in case kmalloc() fails. Signed-off-by:
-
Eric Biggers authored
commit 8f9c4693 upstream. Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte 'enckeylen', followed by an authentication key and an encryption key. crypto_authenc_extractkeys() parses the key to find the inner keys. However, it fails to consider the case where the rtattr's payload is longer than 4 bytes but not 4-byte aligned, and where the key ends before the next 4-byte aligned boundary. In this case, 'keylen -= RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This causes a buffer overread and crash during crypto_ahash_setkey(). Fix it by restricting the rtattr payload to the expected size. Reproducer using AF_ALG: #include <linux/if_alg.h> #include <linux/rtnetlink.h> #include <sys/socket.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "authenc(hmac(sha256),cbc(aes))", }; struct { struct rtattr attr; __be32 enckeylen; char keys[1]; } __attribute__((packed)) key = { .attr.rta_len = sizeof(key), .attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */, }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key)); } It caused: BUG: unable to handle kernel paging request at ffff88007ffdc000 PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0 Oops: 0000 [#1] SMP CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155 [...] Call Trace: sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321 crypto_shash_finup+0x1a/0x30 crypto/shash.c:178 shash_digest_unaligned+0x45/0x60 crypto/shash.c:186 crypto_shash_digest+0x24/0x40 crypto/shash.c:202 hmac_setkey+0x135/0x1e0 crypto/hmac.c:66 crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66 shash_async_setkey+0x10/0x20 crypto/shash.c:223 crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202 crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96 crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62 aead_setkey+0xc/0x10 crypto/algif_aead.c:526 alg_setkey crypto/af_alg.c:223 [inline] alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256 __sys_setsockopt+0x6d/0xd0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910 do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: e236d4a8 ("[CRYPTO] authenc: Move enckeylen into key itself") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit ab57b335 upstream. Convert the bcm crypto driver to use crypto_authenc_extractkeys() so that it picks up the fix for broken validation of rtattr::rta_len. This also fixes the DES weak key check to actually be done on the right key. (It was checking the authentication key, not the encryption key...) Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Eric Biggers authored
commit dc95b535 upstream. Convert the ccree crypto driver to use crypto_authenc_extractkeys() so that it picks up the fix for broken validation of rtattr::rta_len. Fixes: ff27e85a ("crypto: ccree - add AEAD support") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by:
-
Harsh Jain authored
commit a7773363 upstream. Authencesn template in decrypt path unconditionally calls aead_request_complete after ahash_verify which leads to following kernel panic in after decryption. [ 338.539800] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 338.548372] PGD 0 P4D 0 [ 338.551157] Oops: 0000 [#1] SMP PTI [ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13 [ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4] [ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b [ 338.598547] RSP: 0018:ffff911c97803c00 EFLAGS: 00010246 [ 338.604268] RAX: 0000000000000002 RBX: ffff911c4469ee00 RCX: 0000000000000000 [ 338.612090] RDX: 0000000000000000 RSI: 0000000000000130 RDI: ffff911b87c20400 [ 338.619874] RBP: 0000000000000000 R08: ffff911b87c20498 R09: 000000000000000a [ 338.627610] R10: 0000000000000001 R11: 0000000000000004 R12: 0000000000000000 [ 338.635402] R13: ffff911c89590000 R14: ffff911c91730000 R15: 0000000000000000 [ 338.643234] FS: 0000000000000000(0000) GS:ffff911c97800000(0000) knlGS:0000000000000000 [ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 338.658299] CR2: 0000000000000004 CR3: 00000001ec20a000 CR4: 00000000000006f0 [ 338.666382] Call Trace: [ 338.669051] <IRQ> [ 338.671254] esp_input_done+0x12/0x20 [esp4] [ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr] [ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr] [ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr] [ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4] [ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4] [ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90 [ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90 [ 338.712517] ? apic_update_irq_cfg+0x82/0xf0 [ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4] [ 338.722015] net_rx_action+0x2aa/0x3e0 [ 338.726136] __do_softirq+0xcb/0x280 [ 338.730054] irq_exit+0xde/0xf0 [ 338.733504] do_IRQ+0x54/0xd0 [ 338.736745] common_interrupt+0xf/0xf Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Signed-off-by:
Harsh Jain <harsh@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Aymen Sghaier authored
commit 04e6d25c upstream. Recent changes - probably DMA API related (generic and/or arm64-specific) - exposed a case where driver maps a zero-length buffer: ahash_init()->ahash_update()->ahash_final() with a zero-length string to hash kernel BUG at kernel/dma/swiotlb.c:475! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1823 Comm: cryptomgr_test Not tainted 4.20.0-rc1-00108-g00c9fe37 #1 Hardware name: LS1046A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : swiotlb_tbl_map_single+0x170/0x2b8 lr : swiotlb_map_page+0x134/0x1f8 sp : ffff00000f79b8f0 x29: ffff00000f79b8f0 x28: 0000000000000000 x27: ffff0000093d0000 x26: 0000000000000000 x25: 00000000001f3ffe x24: 0000000000200000 x23: 0000000000000000 x22: 00000009f2c538c0 x21: ffff800970aeb410 x20: 0000000000000001 x19: ffff800970aeb410 x18: 0000000000000007 x17: 000000000000000e x16: 0000000000000001 x15: 0000000000000019 x14: c32cb8218a167fe8 x13: ffffffff00000000 x12: ffff80097fdae348 x11: 0000800976bca000 x10: 0000000000000010 x9 : 0000000000000000 x8 : ffff0000091fd6c8 x7 : 0000000000000000 x6 : 00000009f2c538bf x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 00000009f2c538c0 x1 : 00000000f9fff000 x0 : 0000000000000000 Process cryptomgr_test (pid: 1823, stack limit = 0x(____ptrval____)) Call trace: swiotlb_tbl_map_single+0x170/0x2b8 swiotlb_map_page+0x134/0x1f8 ahash_final_no_ctx+0xc4/0x6cc ahash_final+0x10/0x18 crypto_ahash_op+0x30/0x84 crypto_ahash_final+0x14/0x1c __test_hash+0x574/0xe0c test_hash+0x28/0x80 __alg_test_hash+0x84/0xd0 alg_test_hash+0x78/0x144 alg_test.part.30+0x12c/0x2b4 alg_test+0x3c/0x68 cryptomgr_test+0x44/0x4c kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: d34bfc18 2a1a03f7 1a9f8694 35fff89a (d4210000) Cc: <stable@vger.kernel.org> Signed-off-by:
Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Eric Biggers authored
commit d45a90cb upstream. sm3_compress() calls rol32() with shift >= 32, which causes undefined behavior. This is easily detected by enabling CONFIG_UBSAN. Explicitly AND with 31 to make the behavior well defined. Fixes: 4f0fc160 ("crypto: sm3 - add OSCCA SM3 secure hash") Cc: <stable@vger.kernel.org> # v4.15+ Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 11287b69 ] This soft dependency works around an issue where sometimes the genphy driver is used instead of the dedicated PHY driver. The root cause of the issue isn't clear yet. People reported the unloading/re-loading module r8169 helps, and also configuring this soft dependency in the modprobe config files. Important just seems to be that the realtek module is loaded before r8169. Once this has been applied preliminary fix 38af4b90 ("net: phy: add workaround for issue where PHY driver doesn't bind to the device") will be removed. Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 4a06fa67 ] Commit 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") avoided a read beyond the end of the skb linear segment by calling pskb_may_pull. That function can trigger a BUG_ON in pskb_expand_head if the skb is shared, which it is when when peeking. It can also return ENOMEM. Avoid both by switching to safer skb_header_pointer. Fixes: 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") Reported-by:
syzbot <syzkaller@googlegroups.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 001e465f ] A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e4 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by:
-
Heiner Kallweit authored
[ Upstream commit 10262b0b ] Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e ("r8169: Dereference MMIO address immediately before use") Signed-off-by:
-
Cong Wang authored
[ Upstream commit 26d92e95 ] In smc_release() we release smc->clcsock before unhash the smc sock, but a parallel smc_diag_dump() may be still reading smc->clcsock, therefore this could cause a use-after-free as reported by syzbot. Reported-and-tested-by: syzbot+fbd1e5476e4c94c7b34e@syzkaller.appspotmail.com Fixes: 51f1de79 ("net/smc: replace sock_put worker by socket refcounting") Cc: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com Signed-off-by:
-
Bryan Whitehead authored
[ Upstream commit a0071840 ] It has been noticed that some phys do not have the registers required by the previous implementation. To fix this, instead of using phy_read, the required information is extracted from the phy_device structure. fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by:
-
Stanislav Fomichev authored
[ Upstream commit 0b7959b6 ] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d1 Call Trace: ? napi_gro_frags+0xa7/0x2c0 tun_get_user+0xb50/0xf20 tun_chr_write_iter+0x53/0x70 new_sync_write+0xff/0x160 vfs_write+0x191/0x1e0 __x64_sys_write+0x5e/0xd0 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I think there is a subtle race between sending a packet via tap and attaching it: CPU0: CPU1: tun_chr_ioctl(TUNSETIFF) tun_set_iff tun_attach rcu_assign_pointer(tfile->tun, tun); tun_fops->write_iter() tun_chr_write_iter tun_napi_alloc_frags napi_get_frags napi->skb = napi_alloc_skb tun_napi_init netif_napi_add napi->skb = NULL napi->skb is NULL here napi_gro_frags napi_frags_skb skb = napi->skb skb_reset_mac_header(skb) panic() Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to be the last thing we do in tun_attach(); this should guarantee that when we call tun_get() we always get an initialized object. v2 changes: * remove extra napi_mutex locks/unlocks for napi operations Reported-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit c5715b8f ] Previously upon SYN timeouts the sender recomputes the txhash to try a different path. However this does not apply on the initial timeout of SYN-data (active Fast Open). Therefore an active IPv6 Fast Open connection may incur one second RTO penalty to take on a new path after the second SYN retransmission uses a new flow label. This patch removes this undesirable behavior so Fast Open changes the flow label just like the regular connections. This also helps avoid falsely disabling Fast Open on the sender which triggers after two consecutive SYN timeouts on Fast Open. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Jason Gunthorpe authored
[ Upstream commit d972f3dc ] 'dev' is non NULL when the addr_len check triggers so it must goto a label that does the dev_put otherwise dev will have a leaked refcount. This bug causes the ib_ipoib module to become unloadable when using systemd-network as it triggers this check on InfiniBand links. Fixes: 99137b78 ("packet: validate address length") Reported-by:
-
JianJhen Chen authored
[ Upstream commit 4c84edc1 ] When handling DNAT'ed packets on a bridge device, the neighbour cache entry from lookup was used without checking its state. It means that a cache entry in the NUD_STALE state will be used directly instead of entering the NUD_DELAY state to confirm the reachability of the neighbor. This problem becomes worse after commit 2724680b ("neigh: Keep neighbour cache entries if number of them is small enough."), since all neighbour cache entries in the NUD_STALE state will be kept in the neighbour table as long as the number of cache entries does not exceed the value specified in gc_thresh1. This commit validates the state of a neighbour cache entry before using the entry. Signed-off-by:
JianJhen Chen <kchen@synology.com> Reviewed-by:
JinLin Chen <jlchen@synology.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7d033c9f ] This patch makes sure the flow label in the IPv6 header forged in ipv6_local_error() is initialized. BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:177 [inline] move_addr_to_user+0x2e9/0x4f0 net/socket.c:227 ___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8750c06c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9 RDX: 0000000000002000 RSI: 0000000020000400 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8750c076d4 R13: 00000000004c4a60 R14: 00000000004d8140 R15: 00000000ffffffff Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_save_stack mm/kmsan/kmsan.c:219 [inline] kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439 __msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200 ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475 udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335 inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334 __ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311 ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775 udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 4-7 of 28 are uninitialized Memory access of size 28 starts at ffff8881937bfce0 Data copied to user address 0000000020000000 Signed-off-by:
-
Mark Rutland authored
[ Upstream commit b3669b1e ] To allow EL0 (and/or EL1) to use pointer authentication functionality, we must ensure that pointer authentication instructions and accesses to pointer authentication keys are not trapped to EL2. This patch ensures that HCR_EL2 is configured appropriately when the kernel is booted at EL2. For non-VHE kernels we set HCR_EL2.{API,APK}, ensuring that EL1 can access keys and permit EL0 use of instructions. For VHE kernels host EL0 (TGE && E2H) is unaffected by these settings, and it doesn't matter how we configure HCR_EL2.{API,APK}, so we don't bother setting them. This does not enable support for KVM guests, since KVM manages HCR_EL2 itself when running VMs. Reviewed-by:
Richard Henderson <richard.henderson@linaro.org> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Rutland authored
[ Upstream commit 4eaed6aa ] In KVM we define the configuration of HCR_EL2 for a VHE HOST in HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the non-VHE host flags, and open-code HCR_RW. Further, in head.S we open-code the flags for VHE and non-VHE configurations. In future, we're going to want to configure more flags for the host, so lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S. We now use mov_q to generate the HCR_EL2 value, as we use when configuring other registers in head.S. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
-
Varun Prakash authored
[ Upstream commit ed076c55 ] In case of arp failure call cxgbit_put_csk() to free csk. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
