- 26 Sep, 2016 40 commits
-
-
Josef Bacik authored
Really there's lots of things that can go wrong here, kill all the BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO instead. Signed-off-by:
Josef Bacik <jbacik@fb.com> [ switched to btrfs_err, errors go to common label ] Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Arnd Bergmann authored
The addition of btrfs_no_printk() caused a build failure when CONFIG_PRINTK is disabled: fs/btrfs/send.c: In function 'send_rename': fs/btrfs/ctree.h:3367:2: error: implicit declaration of function 'btrfs_no_printk' [-Werror=implicit-function-declaration] This moves the helper outside of that #ifdef so it is always defined, and changes the existing #ifdef to refer to that helper as well for consistency. Fixes: 47c57058ff2c ("btrfs: btrfs_debug should consume fs_info when DEBUG is not defined") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Liu Bo authored
This is an additional patch to "Btrfs: memset to avoid stale content in btree node block". This uses memset to initialize the unused space in a leaf to avoid potential stale content, which may be incurred by pushing items between sibling leaves. Signed-off-by:
-
Goldwyn Rodrigues authored
Code cleanup. parent_start is initialized multiple times when it is not necessary to do so. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Fixes: 7cf5b976 ("btrfs: qgroup: Cleanup old inaccurate facilities") Signed-off-by:
-
Goldwyn Rodrigues authored
Code cleanup. count is already (unsgined long)-1. That is the reason run_all was set. Do not reassign it (unsigned long)-1. Signed-off-by:
-
Anand Jain authored
btrfs_show_devname() is using the device_list_mutex, sometimes a call to blkdev_put() leads vfs calling into this func. So call blkdev_put() outside of device_list_mutex, as of now. [ 983.284212] ====================================================== [ 983.290401] [ INFO: possible circular locking dependency detected ] [ 983.296677] 4.8.0-rc5-ceph-00023-g1b39cec2 #1 Not tainted [ 983.302081] ------------------------------------------------------- [ 983.308357] umount/21720 is trying to acquire lock: [ 983.313243] (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.321264] [ 983.321264] but task is already holding lock: [ 983.327101] (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.337839] [ 983.337839] which lock already depends on the new lock. [ 983.337839] [ 983.346024] [ 983.346024] the existing dependency chain (in reverse order) is: [ 983.353512] -> #4 (&fs_devs->device_list_mutex){+.+...}: [ 983.359096] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.365143] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.371521] [<ffffffffc02d8116>] btrfs_show_devname+0x36/0x1f0 [btrfs] [ 983.378710] [<ffffffff9129523e>] show_vfsmnt+0x4e/0x150 [ 983.384593] [<ffffffff9126ffc7>] m_show+0x17/0x20 [ 983.389957] [<ffffffff91276405>] seq_read+0x2b5/0x3b0 [ 983.395669] [<ffffffff9124c808>] __vfs_read+0x28/0x100 [ 983.401464] [<ffffffff9124eb3b>] vfs_read+0xab/0x150 [ 983.407080] [<ffffffff9124ec32>] SyS_read+0x52/0xb0 [ 983.412609] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.419617] -> #3 (namespace_sem){++++++}: [ 983.424024] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.430074] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.435785] [<ffffffff91272457>] lock_mount+0x67/0x1c0 [ 983.441582] [<ffffffff91272ab2>] do_add_mount+0x32/0xf0 [ 983.447458] [<ffffffff9127363a>] finish_automount+0x5a/0xc0 [ 983.453682] [<ffffffff91259513>] follow_managed+0x1b3/0x2a0 [ 983.459912] [<ffffffff9125b750>] lookup_fast+0x300/0x350 [ 983.465875] [<ffffffff9125d6e7>] path_openat+0x3a7/0xaa0 [ 983.471846] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.477731] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.483702] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.489240] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.496254] -> #2 (&sb->s_type->i_mutex_key#3){+.+.+.}: [ 983.501798] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.507855] [<ffffffff918239e9>] down_write+0x49/0x80 [ 983.513558] [<ffffffff91366237>] start_creating+0x87/0x100 [ 983.519703] [<ffffffff91366647>] debugfs_create_dir+0x17/0x100 [ 983.526195] [<ffffffff911df153>] bdi_register+0x93/0x210 [ 983.532165] [<ffffffff911df313>] bdi_register_owner+0x43/0x70 [ 983.538570] [<ffffffff914080fb>] device_add_disk+0x1fb/0x450 [ 983.544888] [<ffffffff91580226>] loop_add+0x1e6/0x290 [ 983.550596] [<ffffffff91fec358>] loop_init+0x10b/0x14f [ 983.556394] [<ffffffff91002207>] do_one_initcall+0xa7/0x180 [ 983.562618] [<ffffffff91f932e0>] kernel_init_freeable+0x1cc/0x266 [ 983.569370] [<ffffffff918174be>] kernel_init+0xe/0x100 [ 983.575166] [<ffffffff9182620f>] ret_from_fork+0x1f/0x40 [ 983.581131] -> #1 (loop_index_mutex){+.+.+.}: [ 983.585801] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.591858] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.598256] [<ffffffff9157ed3f>] lo_open+0x1f/0x60 [ 983.603704] [<ffffffff9128eec3>] __blkdev_get+0x123/0x400 [ 983.609757] [<ffffffff9128f4ea>] blkdev_get+0x34a/0x350 [ 983.615639] [<ffffffff9128f554>] blkdev_open+0x64/0x80 [ 983.621428] [<ffffffff9124aff6>] do_dentry_open+0x1c6/0x2d0 [ 983.627651] [<ffffffff9124c029>] vfs_open+0x69/0x80 [ 983.633181] [<ffffffff9125db74>] path_openat+0x834/0xaa0 [ 983.639152] [<ffffffff9125ef75>] do_filp_open+0x85/0xe0 [ 983.645035] [<ffffffff9124c41c>] do_sys_open+0x14c/0x1f0 [ 983.650999] [<ffffffff9124c4de>] SyS_open+0x1e/0x20 [ 983.656535] [<ffffffff91825fc0>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 983.663541] -> #0 (&bdev->bd_mutex){+.+.+.}: [ 983.668107] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.674510] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.680561] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.686967] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.692761] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.699699] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.707178] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 983.714380] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 983.721061] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 983.727908] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 983.734744] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 983.740888] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 983.747909] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 983.754745] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 983.760977] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 983.766773] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 983.772738] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 983.778708] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 983.785373] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 983.792212] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 [ 983.799225] [ 983.799225] other info that might help us debug this: [ 983.799225] [ 983.807291] Chain exists of: &bdev->bd_mutex --> namespace_sem --> &fs_devs->device_list_mutex [ 983.816521] Possible unsafe locking scenario: [ 983.816521] [ 983.822489] CPU0 CPU1 [ 983.827043] ---- ---- [ 983.831599] lock(&fs_devs->device_list_mutex); [ 983.836289] lock(namespace_sem); [ 983.842268] lock(&fs_devs->device_list_mutex); [ 983.849478] lock(&bdev->bd_mutex); [ 983.853127] [ 983.853127] *** DEADLOCK *** [ 983.853127] [ 983.859113] 3 locks held by umount/21720: [ 983.863145] #0: (&type->s_umount_key#35){++++..}, at: [<ffffffff912515f5>] deactivate_super+0x55/0x70 [ 983.872713] #1: (uuid_mutex){+.+.+.}, at: [<ffffffffc033d8d3>] btrfs_close_devices+0x23/0xa0 [btrfs] [ 983.882206] #2: (&fs_devs->device_list_mutex){+.+...}, at: [<ffffffffc033d6f6>] __btrfs_close_devices+0x46/0x200 [btrfs] [ 983.893422] [ 983.893422] stack backtrace: [ 983.897824] CPU: 6 PID: 21720 Comm: umount Not tainted 4.8.0-rc5-ceph-00023-g1b39cec2 #1 [ 983.905958] Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 1.0c 09/07/2015 [ 983.913492] 0000000000000000 ffff8c8a53c17a38 ffffffff91429521 ffffffff9260f4f0 [ 983.921018] ffffffff92642760 ffff8c8a53c17a88 ffffffff911b2b04 0000000000000050 [ 983.928542] ffffffff9237d620 ffff8c8a5294aee0 ffff8c8a5294aeb8 ffff8c8a5294aee0 [ 983.936072] Call Trace: [ 983.938545] [<ffffffff91429521>] dump_stack+0x85/0xc4 [ 983.943715] [<ffffffff911b2b04>] print_circular_bug+0x1fb/0x20c [ 983.949748] [<ffffffff910def43>] __lock_acquire+0x1003/0x17b0 [ 983.955613] [<ffffffff910dfd0c>] lock_acquire+0x1bc/0x1f0 [ 983.961123] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.966550] [<ffffffff91823125>] mutex_lock_nested+0x65/0x350 [ 983.972407] [<ffffffff9128ec51>] ? blkdev_put+0x31/0x150 [ 983.977832] [<ffffffff9128ec51>] blkdev_put+0x31/0x150 [ 983.983101] [<ffffffffc033481f>] btrfs_close_bdev+0x4f/0x60 [btrfs] [ 983.989500] [<ffffffffc033d77b>] __btrfs_close_devices+0xcb/0x200 [btrfs] [ 983.996415] [<ffffffffc033d8db>] btrfs_close_devices+0x2b/0xa0 [btrfs] [ 984.003068] [<ffffffffc03081c5>] close_ctree+0x265/0x340 [btrfs] [ 984.009189] [<ffffffff9126cc5e>] ? evict_inodes+0x15e/0x170 [ 984.014881] [<ffffffffc02d7959>] btrfs_put_super+0x19/0x20 [btrfs] [ 984.021176] [<ffffffff91250e2f>] generic_shutdown_super+0x6f/0x100 [ 984.027476] [<ffffffff91250f56>] kill_anon_super+0x16/0x30 [ 984.033082] [<ffffffffc02da97e>] btrfs_kill_super+0x1e/0x130 [btrfs] [ 984.039548] [<ffffffff91250fe9>] deactivate_locked_super+0x49/0x80 [ 984.045839] [<ffffffff912515fd>] deactivate_super+0x5d/0x70 [ 984.051525] [<ffffffff91270a1c>] cleanup_mnt+0x5c/0x80 [ 984.056774] [<ffffffff91270a92>] __cleanup_mnt+0x12/0x20 [ 984.062201] [<ffffffff910aa2fe>] task_work_run+0x7e/0xc0 [ 984.067625] [<ffffffff91081b5a>] exit_to_usermode_loop+0x7e/0xb4 [ 984.073747] [<ffffffff910039eb>] syscall_return_slowpath+0xbb/0xd0 [ 984.080038] [<ffffffff9182605c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 Reported-by:Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Liu Bo authored
The extent buffer 'next' needs to be free'd conditionally. Signed-off-by:
-
Jeff Mahoney authored
We can hit unused variable warnings when btrfs_debug and friends are just aliases for no_printk. This is due to the fs_info not getting consumed by the function call, which can happen if convenenience variables are used. This patch adds a new btrfs_no_printk static inline that consumes the convenience variable and does nothing else. It silences the unused variable warning and has no impact on the generated code: $ size fs/btrfs/extent_io.o* text data bss dec hex filename 44072 152 32 44256 ace0 fs/btrfs/extent_io.o.btrfs_no_printk 44072 152 32 44256 ace0 fs/btrfs/extent_io.o.no_printk Fixes: 27a0dd61 (Btrfs: make btrfs_debug match pr_debug handling related to DEBUG) Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jeff Mahoney authored
This was basically an open-coded, less flexible dynamic printk. We can just use btrfs_debug instead. Signed-off-by:
-
Jeff Mahoney authored
For many printks, we want to know which file system issued the message. This patch converts most pr_* calls to use the btrfs_* versions instead. In some cases, this means adding plumbing to allow call sites access to an fs_info pointer. fs/btrfs/check-integrity.c is left alone for another day. Signed-off-by:
-
Jeff Mahoney authored
This patch converts printk(KERN_* style messages to use the pr_* versions. One side effect is that anything that was KERN_DEBUG is now automatically a dynamic debug message. Signed-off-by:
-
Jeff Mahoney authored
CodingStyle chapter 2: "[...] never break user-visible strings such as printk messages, because that breaks the ability to grep for them." This patch unsplits user-visible strings. Signed-off-by:
-
Jeff Mahoney authored
btrfs_rm_device frees the block device but then re-opens it using the saved device name. A race exists between the close and the re-open that allows the block size to be changed. The result is getting stuck forever in the reclaim loop in __getblk_slow. This patch moves the superblock cleanup before closing the block device, which is also consistent with other callers. We also don't need a private copy of dev_name as the whole routine operates under the uuid_mutex. Signed-off-by:
-
Liu Bo authored
In a corrupted btrfs image, we can come across this BUG_ON and get an unreponsive system, but if we return errors instead, its caller can handle everything gracefully by aborting the current transaction. Signed-off-by:
-
Josef Bacik authored
We don't track the reloc roots in any sort of normal way, so the only way the root/commit_root nodes get free'd is if the relocation finishes successfully and the reloc root is deleted. Fix this by free'ing them in free_reloc_roots. Thanks, Signed-off-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
-
Liu Bo authored
We need to check items in a node to make sure that we're reading a valid one, otherwise we could get various crashes while processing delayed_refs. Signed-off-by:
-
Liu Bo authored
Somehow we missed btrfs_print_tree when last time we updated error handling for read_extent_block(). This keeps us from getting a NULL pointer panic when btrfs_print_tree's read_extent_block() fails. Signed-off-by:
-
Liu Bo authored
Since we could get errors from the concurrent aborted transaction, the check of this BUG_ON in start_transaction is not true any more. Say, while flushing free space cache inode's dirty pages, btrfs_finish_ordered_io -> btrfs_join_transaction_nolock (the transaction has been aborted.) -> BUG_ON(type == TRANS_JOIN_NOLOCK); Signed-off-by: -
Liu Bo authored
During updating btree, we could push items between sibling nodes/leaves, for leaves data sections starts reversely from the end of the block while for nodes we only have key pairs which are stored one by one from the start of the block. So we could do try to push key pairs from one node to the next node right in the tree, and after that, we update the node's nritems to reflect the correct end while leaving the stale content in the node. One may intentionally corrupt the fs image and access the stale content by bumping the nritems and causes various crashes. This takes the in-memory @nritems as the correct one and gets to memset the unused part of a btree node. Signed-off-by:
-
Liu Bo authored
When relocating tree blocks, we firstly get block information from back references in the extent tree, we then search fs tree to try to find all parents of a block. However, if fs tree is corrupted, eg. if there're some missing items, we could come across these WARN_ONs and BUG_ONs. This makes us print some error messages and return gracefully from balance. Signed-off-by:
-
Josef Bacik authored
No reason to bug on in here, fs corruption could easily cause these things to happen. Signed-off-by:
-
Josef Bacik authored
Nobody uses this, it makes no sense to do partial reads of extent buffers. Signed-off-by:
-
Josef Bacik authored
We have a lot of random ints in btrfs_fs_info that can be put into flags. This is mostly equivalent with the exception of how we deal with quota going on or off, now instead we set a flag when we are turning it on or off and deal with that appropriately, rather than just having a pending state that the current quota_enabled gets set to. Thanks, Signed-off-by:
-
Qu Wenruo authored
btrfs: extend btrfs_set_extent_delalloc and its friends to support in-band dedupe and subpage size patchset Extend btrfs_set_extent_delalloc() and extent_clear_unlock_delalloc() parameters for both in-band dedupe and subpage sector size patchset. This should reduce conflict of both patchset and the effort to rebase them. Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com> Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Jeff Mahoney authored
We can re-use the dynamic debugging descriptor to make use of the dynamic debugging mechanism but still use our own printk interface. Defining the DEBUG macro works as it did before. When it's defined, all of the messages default to print. We can also enable all debug messages at boot or module-load time using the 'dyndbg' and 'btrfs.dyndbg' options. Signed-off-by:
-
Luis Henriques authored
Variable 'gen' in reada_for_search() is not used since commit 58dc4ce4 ("btrfs: remove unused parameter from readahead_tree_block"). This patch simply removes this variable. Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Reviewed-by:
-
Luis Henriques authored
Variable 'blocksize' in reada_walk_down() is not used since commit d3e46fea ("btrfs: sink blocksize parameter to readahead_tree_block"). This patch simply removes this variable. Signed-off-by:
-
Naohiro Aota authored
Currently, btrfs_relocate_chunk() is removing relocated BG by itself. But the work can be done by btrfs_delete_unused_bgs() (and it's better since it trim the BG). Let's dedupe the code. While btrfs_delete_unused_bgs() is already hitting the relocated BG, it skip the BG since the BG has "ro" flag set (to keep balancing BG intact). On the other hand, btrfs cannot drop "ro" flag here to prevent additional writes. So this patch make use of "removed" flag. btrfs_delete_unused_bgs() now detect the flag to distinguish whether a read-only BG is relocating or not. Signed-off-by:
Naohiro Aota <naohiro.aota@hgst.com> Reviewed-by:
-
Liu Bo authored
Currently we allow inconsistence about mixed flag (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA). We'd get ENOSPC if block group has mixed flag and btrfs doesn't. If that happens, we have one space_info with mixed flag and another space_info only with BTRFS_BLOCK_GROUP_METADATA, and global_block_rsv.space_info points to the latter one, but all bytes from block_group contributes to the mixed space_info, thus all the allocation will fail with ENOSPC. This adds a check for the above case. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Liu Bo authored
So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by: -
Liu Bo authored
This BUG() has been triggered by a fuzz testing image, which contains an invalid chunk type, ie. a single stripe chunk has the raid6 type. Btrfs can handle this gracefully by returning -EIO, so besides using btrfs_warn to give us more debugging information rather than a single BUG(), we can return error properly. Signed-off-by:
-
Lu Fengqi authored
Only in the case of different root_id or different object_id, check_shared identified extent as the shared. However, If a extent was referred by different offset of same file, it should also be identified as shared. In addition, check_shared's loop scale is at least n^3, so if a extent has too many references, even causes soft hang up. First, add all delayed_ref to the ref_tree and calculate the unqiue_refs, if the unique_refs is greater than one, return BACKREF_FOUND_SHARED. Then individually add the on-disk reference(inline/keyed) to the ref_tree and calculate the unique_refs of the ref_tree to check if the unique_refs is greater than one.Because once there are two references to return SHARED, so the time complexity is close to the constant. Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by:
-
David Sterba authored
Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Eric Sandeen authored
btrfs provides a helpful demonstration of how to export a global variable via debugfs; however, it is unique among other debugfs files in that it is world-writable, which causes some concern to people who are not familiar with its purpose. Fix it so that it is only user-writable. Signed-off-by:
-
Liu Bo authored
While processing delayed refs, we may update block group's statistics and attach it to cur_trans->dirty_bgs, and later writing dirty block groups will process the list, which happens during btrfs_commit_transaction(). For whatever reason, the transaction is aborted and dirty_bgs is not processed in cleanup_transaction(), we end up with memory leak of these dirty block group cache. Since btrfs_start_dirty_block_groups() doesn't make it go to the commit critical section, this also adds the cleanup work inside it. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracefs fixes from Steven Rostedt: "Al Viro has been looking at the tracefs code, and has pointed out some issues. This contains one fix by me and one by Al. I'm sure that he'll come up with more but for now I tested these patches and they don't appear to have any negative impact on tracing" * tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data
-
Dave Chinner authored
When building XFS with -Werror, it now fails with: include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable] volatile char c; ^ This is a regression caused by commit e23d4159 ("fix fault_in_multipages_...() on architectures with no-op access_ok()"). Fix it by re-adding the "(void)c" trick taht was previously used to make the compiler think the variable is used. Signed-off-by:Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
