Similarly to how we configure the RSB (Receive Status Block) we also
need to set the TSB (Transmit Status Block) based on the host endian.
This was missing from the commit indicated below.

Fixes: 389a06bc ("net: systemport: Set correct RSB endian bits based on host")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ivan Delalande says:

====================
inet_diag: report TCP MD5 signing keys and addresses

Allow userspace to retrieve MD5 signature keys and addresses configured
on TCP sockets through inet_diag.

Thanks to Eric Dumazet and Stephen Hemminger for their useful
explanations and feedback.

v5: - memset the whole netlink payload after it has been nla_reserve-d
      in tcp_diag_put_md5sig (a third memset had to be added for
      tcpm_key so we might as well have just one for entire region).
    - move the nla_total_size call from inet_sk_attr_size to the
      idiag_get_aux_size defined by protocols as they could add multiple
      netlink attributes,
    - add check for net_admin in tcp_diag_get_aux_size.

v4: - add new struct tcp_diag_md5sig to report the data instead of
      tcp_md5sig to avoid wasting 112 bytes on every tcpm_addr,
    - memset tcpm_addr on IPv4 addresses to avoid leaks,
    - style fix in inet_diag_dump_one_icsk.

v3: - rename inet_diag_*md5sig in tcp_diag.c to tcp_diag_* for
      consistency,
    - don't lock the socket in tcp_diag_put_md5sig,
    - add checks on md5sig_count in tcp_diag_put_md5sig to not create
      the netlink attribute if the list is empty, and to avoid overflows
      or memory leaks if the list has changed in the meantime.

v2: - move changes to tcp_diag.c and extend inet_diag_handler to allow
      protocols to provide additional data on INET_DIAG_INFO,
    - lock socket before calling tcp_diag_put_md5sig.

I also have a patch for iproute2/ss to test this change, making it print
this new attribute. I'm planning to polish and send it if this series
gets applied.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Report TCP MD5 (RFC2385) signing keys, addresses and address prefixes to
processes with CAP_NET_ADMIN requesting INET_DIAG_INFO. Currently it is
not possible to retrieve these from the kernel once they have been
configured on sockets.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend inet_diag_handler to allow individual protocols to report
additional data on INET_DIAG_INFO through idiag_get_aux. The size
can be dynamic and is computed by idiag_get_aux_size.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grepping for "sizeof\(.+\) / sizeof\(" found this as one of the first
candidates.
Maybe a coccinelle can catch all of those.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

priv is being assigned but is never used, so remove it.

Cleans up clang build warning:
"warning: Value stored to 'priv' is never read"

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the array bcm7xxx_suspend_cfg A on the stack, instead
make it static.  Makes the object code smaller by over 300 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6351	   8146	      0	  14497	   38a1	drivers/net/phy/bcm7xxx.o

After:
   text	   data	    bss	    dec	    hex	filename
   5986	   8210	      0	  14196	   3774	drivers/net/phy/bcm7xxx.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the arrays port_ids on the stack, instead make them static.
Makes the object code smaller by over 700 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  28785	   5832	    192	  34809	   87f9	fman.o

After:
   text	   data	    bss	    dec	    hex	filename
  27921	   5992	    192	  34105	   8539	fman.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Three cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Excess of seafood or something happened while I cooked the commit
adding RB tree to inetpeer.

Of course, RCU rules need to be respected or bad things can happen.

In this particular loop, we need to read *pp once per iteration, not
twice.

Fixes: b145425f ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The race was introduced by me in commit 971316f0 ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead").  I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().

Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.

TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.

Hopefully this explains use-after-free reported by syzcaller:

	BUG: KASAN: use-after-free in debug_spin_lock_before
	...
	 _raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
	 ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148

this is spin_lock(eventpoll->lock),

	...
	Freed by task 17774:
	...
	 kfree+0xe8/0x2c0 mm/slub.c:3883
	 ep_free+0x22c/0x2a0 fs/eventpoll.c:865

Fixes: 971316f0 ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: 范龙飞 <long7573@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
    Borkmann.

 2) IPSEC ESP error paths leak memory, from Steffen Klassert.

 3) We need an RCU grace period before freeing fib6_node objects, from
    Wei Wang.

 4) Must check skb_put_padto() return value in HSR driver, from FLorian
    Fainelli.

 5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
    Jeffery.

 6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
    Dumazet.

 7) Use after free when tcf_chain_destroy() called multiple times, from
    Jiri Pirko.

 8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.

 9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
    inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
    From Stefano Brivio.

10) L2TP tunnel refcount fixes from Guillaume Nault.

11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
    Kauperman.

12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
    phy_stop_machine(), it causes regressions for multiple people. From
    Florian Fainelli.

13) When packets are sent out of br0 we have to clear the
    offload_fwdq_mark value.

14) Several NULL pointer deref fixes in packet schedulers when their
    ->init() routine fails. From Nikolay Aleksandrov.

15) Aquantium devices cannot checksum offload correctly when the packet
    is <= 60 bytes. From Pavel Belous.

16) Fix vnet header access past end of buffer in AF_PACKET, from
    Benjamin Poirier.

17) Double free in probe error paths of nfp driver, from Dan Carpenter.

18) QOS capability not checked properly in DCB init paths of mlx5
    driver, from Huy Nguyen.

19) Fix conflicts between firmware load failure and health_care timer in
    mlx5, also from Huy Nguyen.

20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
    from Eran Ben ELisha.

21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
    from Michael Chan.

22) Missing MSIX vector free in bnxt_en, also from Michael Chan.

23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
    Colitti.

24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.

25) bpf_setsockopts() erroneously always returns -EINVAL even on
    success. Fix from Yuchung Cheng.

26) tipc_rcv() needs to linearize the SKB before parsing the inner
    headers, from Parthasarathy Bhuvaragan.

27) Fix deadlock between link status updates and link removal in netvsc
    driver, from Stephen Hemminger.

28) Missed locking of page fragment handling in ESP output, from Steffen
    Klassert.

29) Fix refcnt leak in ebpf congestion control code, from Sabrina
    Dubroca.

30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
    from Christophe Jaillet.

31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
    early demux, from Paolo Abeni.

32) Several info leaks in xfrm_user layer, from Mathias Krause.

33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.

34) Properly propagate obsolete state of route upwards in ipv6 so that
    upper holders like xfrm can see it. From Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
  udp: fix secpath leak
  bridge: switchdev: Clear forward mark when transmitting packet
  mlxsw: spectrum: Forbid linking to devices that have uppers
  wl1251: add a missing spin_lock_init()
  Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
  net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
  kcm: do not attach PF_KCM sockets to avoid deadlock
  sch_tbf: fix two null pointer dereferences on init failure
  sch_sfq: fix null pointer dereference on init failure
  sch_netem: avoid null pointer deref on init failure
  sch_fq_codel: avoid double free on init failure
  sch_cbq: fix null pointer dereferences on init failure
  sch_hfsc: fix null pointer deref and double free on init failure
  sch_hhf: fix null pointer dereference on init failure
  sch_multiq: fix double free on init failure
  sch_htb: fix crash on init failure
  net/mlx5e: Fix CQ moderation mode not set properly
  net/mlx5e: Fix inline header size for small packets
  net/mlx5: E-Switch, Unload the representors in the correct order
  net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
  ...

Pull ceph fix from Ilya Dryomov:
 "ceph fscache page locking fix from Zheng, marked for stable"

* tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix readpage from fscache

Pull input fixes from Dmitry Torokhov:
 "Just a couple drivers fixes (Synaptics PS/2, Xpad)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix PowerA init quirk for some gamepad models
  Input: synaptics - fix device info appearing different on reconnect

The msg_zerocopy test defines SO_ZEROCOPY if necessary, but its value
is inconsistent with the one in asm-generic.h. Correct that.

Also convert one error to a warning. When the test is complete, report
throughput and close cleanly even if the process did not wait for all
completions.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull two more MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix block status codes

  MMC host:
   - sdhci-xenon: Fix SD bus voltage select"

* tag 'mmc-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-xenon: add set_power callback
  mmc: block: Fix block status codes

Documentation for this feature was missing from the patchset.
Copied a lot from the netdev 2.1 paper, addressing some small
interface changes since then.

Changes
  v1 -> v2
    - change email discussion URL format
    - clarify that u32 counter is per-syscall, unsigned and
      wraps after UINT_MAX calls
    - describe errno on send failure specific to MSG_ZEROCOPY
    - a few very minor rewordings
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound fixes from Takashi Iwai:
 "Three regression fixes that should be addressed before the final
  release: a missing mutex call in OSS PCM emulation ioctl, ASoC rt5670
  headset detection breakage, and a regression in simple-card parser
  code"

* tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: simple_card_utils: fix fallback when "label" property isn't present
  ALSA: pcm: Fix power lock unbalance via OSS emulation
  ASoC: rt5670: Fix GPIO headset detection regression

Make sock_filter_is_valid_access consistent with other is_valid_access
helpers.
Requested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mvneta driver and hardware supports IPv6 offload, however it
isn't enabled. Set the NETIF_F_IPV6_CSUM feature to inform the
network layer that this driver can offload IPV6 TCP and UDP
checksums. This change has been tested on an Armada 370 and the
feature support confirmed with several device datasheets
including the Armada XP and Armada 3700.
Signed-off-by: Andrew Pilloud <andrewpilloud@igneoussystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull s390 fixes from Martin Schwidefsky:
 "Three more bug fixes for v4.13.

  The two memory management related fixes are quite new, they fix kernel
  crashes that can be triggered by user space.

  The third commit fixes a bug in the vfio ccw translation code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix BUG_ON in crst_table_upgrade
  s390/mm: fork vs. 5 level page tabel
  vfio: ccw: fix bad ptr math for TIC cda translation

Merge tag 'wireless-drivers-next-for-davem-2017-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.14

Few last patches for 4.14, nothing really major here.

Major changes:

wil6210

* support FW RSSI reporting (by mistake this was accidentally
  mentioned already in the previous pull request, but now it's really
  included)

* make debugfs optional, adds new Kconfig option CONFIG_WIL6210_DEBUGFS

qtnfmac

* implement 64-bit DMA support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

At the end of the do while loop the integer counter retries will
always be zero and so the subsequent check to see if it is zero
is always true and therefore redundant.  Remove the redundant check
and always return -EIO on this return path.  Also unbreak the literal
string in dev_err message to clean up a checkpatch warning.

Detected by CoverityScan, CID#744279 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Regression in chacha20 handling of chunked input

   - Crash in algif_skcipher when used with async io

   - Potential bogus pointer dereference in lib/mpi"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_skcipher - only call put_page on referenced and used pages
  crypto: testmgr - add chunked test cases for chacha20
  crypto: chacha20 - fix handling of chunked input
  lib/mpi: kunmap after finishing accessing buffer

After commit dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.

We must clear the head state on skb reception, if secpath is
present.

Fixes: dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Corentin Labbe says:

====================
net: mdio-mux: Misc fix

This patch series fix minor problems found when working on the
dwmac-sun8i syscon mdio-mux.

Changes since v1:
- Removed obsolete comment about of_mdio_find_bus/put_device
- removed more DRV_VERSION
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

mdio_mux_uninit() call put_device (unconditionally) because of
of_mdio_find_bus() in mdio_mux_init.
But of_mdio_find_bus is only called if mux_bus is empty.
If mux_bus is set, mdio_mux_uninit will print a "refcount_t: underflow"
trace.

This patch add a get_device in the other branch of "if (mux_bus)".
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix an old information that mdio-mux-mmioreg can only handle
8bit registers.
This is not true anymore.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the driver version information because this information
is not useful in an upstream kernel driver.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix checkpatch warning about unnecessary 'out of memory'
message.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix checkpatch warning about NULL Comparison style.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6bc506b4 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.

In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.

However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.

This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.

Fixes: 6bc506b4 ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antoine Tenart says:

====================
net: mvpp2: optional PHYs and GoP link irq

This series aims at making the driver work when no PHY is connected
between a port and the physical layer and not described as a fixed-phy.
This is useful for some usecases such as when a switch is connected
directly to the serdes lanes. It can also be used for SFP ports on the
7k-db and 8k-db while waiting for the phylink support to land in (which
should be part of another series).

This series makes the phy optional in the PPv2 driver, and then adds
the support for the GoP port link interrupt to handle link status
changes on such ports.

This was tested using the SFP ports on the 7k-db and 8k-db boards.

Since v1:
  - Now use phy_interface_mode_is_rgmii() in the GoP link patch.
  - Added one cosmetic patch to take advantage of phy_interface_mode_is_rgmii()
    in the whole PPv2 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A link interrupt can be described. Document this valid interrupt name.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the GoP link interrupt support for when a port isn't
connected to a PHY. Because of this the phylib callback is never called
and the link status management isn't done. This patch use the GoP link
interrupt in such cases to still have a minimal link management. Without
this patch ports not connected to a PHY cannot work.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is not necessarily a PHY between the GoP and the physical port.
However, the driver currently makes the "phy" property mandatory,
contrary to what is stated in the device tree bindings. This patch makes
the PHY optional, and aligns the PPv2 driver on its device tree
documentation. However if a PHY is provided, the GoP link interrupt
won't be used.

With this patch switches directly connected to the serdes lanes and SFP
ports on the Armada 8040-db and Armada 7040-db can be used if the link
interrupt is described in the device tree.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all RGMII checks to use the phy_interface_mode_is_rgmii()
helper. This is a cosmetic patch.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: spectrum_router: Couple of fixes

Ido Schimmel (2):
  mlxsw: spectrum_router: Trap packets hitting anycast routes
  mlxsw: spectrum_router: Set abort trap in all virtual routers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the abort mechanism is invoked a default route directing packets to
the CPU is programmed in all the virtual routers currently in use. This
can result in packet loss in case a new VRF is configured.

Upon abort, program the default route in all virtual routers, whether
they are in use or not.

The patch is directed at net-next since post-abort fixes aren't critical
and packet loss due to a missing default route will be insignificant
compared to packet loss caused by the CPU port policer.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I relied on the fact that anycast routes use the loopback device as
their nexthop device to trap packets hitting them to the CPU.

After commit 4832c30d ("net: ipv6: put host and anycast routes on
device with address") this is no longer the case and such routes are
programmed with a forward action (note the 'offload' flag):

anycast cafe:: dev enp3s0np7 proto kernel metric 0 offload pref medium

This will prevent the router from locally receiving packets destined to
the Subnet-Router anycast address.

Fix this by specifically programming anycast routes with action trap,
which results in the following output:

anycast cafe:: dev enp3s0np7 proto kernel metric 0 pref medium

Fixes: 4832c30d ("net: ipv6: put host and anycast routes on device with address")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>