The arm64 tree added calls to audit_syscall_entry() and rightly included
the syscall number.  The interface has since been changed to not need
the syscall number.  As such, arm64 should no longer pass that value.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch adds auditing functions on entry to or exit from
every system call invocation.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since the arch is found locally in __audit_syscall_entry(), there is no need to
pass it in as a parameter.  Delete it from the parameter list.

x86* was the only arch to call __audit_syscall_entry() directly and did so from
assembly code.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Eric Paris <eparis@redhat.com>

---

As this patch relies on changes in the audit tree, I think it
appropriate to send it through my tree rather than the x86 tree.

We are currently embedding the same check from thread_info.h into
syscall.h thanks to the way syscall_get_arch() was implemented in the
audit tree.  Instead create a new function, is_32bit_task() which is
similar to that found on the powerpc arch.  This simplifies the
syscall.h code and makes the build/Kconfig requirements much easier
to understand.

Signed-off-by: Eric Paris <eparis@redhat.com
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: sparclinux@vger.kernel.org

After merging the audit tree, today's linux-next build (sparc defconfig)
failed like this:

In file included from include/linux/audit.h:29:0,
                 from mm/mmap.c:33:
arch/sparc/include/asm/syscall.h: In function 'syscall_get_arch':
arch/sparc/include/asm/syscall.h:131:9: error: 'TIF_32BIT' undeclared (first use in this function)
arch/sparc/include/asm/syscall.h:131:9: note: each undeclared identifier is reported only once for each function it appears in

And many more ...

Caused by commit 374c0c054122 ("ARCH: AUDIT: implement syscall_get_arch
for all arches").

This patch wraps the usage of TIF_32BIT in:
   if defined(__sparc__) && defined(__arch64__)
Which solves the build problem.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

Include linux/thread_info.h so we can use is_32_bit_task() cleanly.
Then just simplify syscall_get_arch() since is_32_bit_task() works for
all configuration options.
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>

avr32 does not have an asm/syscall.h file.  We need the
syscall_get_arch() definition from that file for all arch's which
support CONFIG_AUDITSYSCALL.  Obviously avr32 is not one of those
arch's.  Move the include inside the CONFIG_AUDITSYSCALL such that we
only do the include if we need the results.

When the syscall_get_arch() call is moved inside __audit_syscall_entry()
this include can be dropped entirely.  But that is going to require some
assembly changes on x86* in a patch that is not ready for the tree...
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

The AUDIT_SECCOMP record looks something like this:

type=SECCOMP msg=audit(1373478171.953:32775): auid=4325 uid=4325 gid=4325 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0 pid=12381 comm="test" sig=31 syscall=231 compat=0 ip=0x39ea8bca89 code=0x0

In order to determine what syscall 231 maps to, we need to have the arch= field right before it.

To see the event, compile this test.c program:

=====
int main(void)
{
        return seccomp_load(seccomp_init(SCMP_ACT_KILL));
}
=====

gcc -g test.c -o test -lseccomp

After running the program, find the record by:  ausearch --start recent -m SECCOMP -i
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
signed-off-by: Eric Paris <eparis@redhat.com>

Since every arch should have syscall_get_arch() defined, stop using the
function argument and just collect this ourselves.  We do not drop the
argument as fixing some code paths (in assembly) to not pass this first
argument is non-trivial.  The argument will be dropped when that is
fixed.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

We have a function where the arch can be queried, syscall_get_arch().
So rather than have every single piece of arch specific code use and/or
duplicate syscall_get_arch(), just have the audit code use the
syscall_get_arch() code.
Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: x86@kernel.org

For all arches which support audit implement syscall_get_arch()
They are all pretty easy and straight forward, stolen from how the call
to audit_syscall_entry() determines the arch.
Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: linux-ia64@vger.kernel.org
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org

Since Alpha supports syscall audit it now needs to have a syscall.h
which implements syscall_get_arch() rather than hard coding this value
into audit_syscall_entry().
Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: linux-alpha@vger.kernel.org

This patch defines syscall_get_arch() for the um platform.  It adds a
new syscall.h header file to define this.  It copies the HOST_AUDIT_ARCH
definition from ptrace.h.  (that definition will be removed when we
switch audit to use this new syscall_get_arch() function)
Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: user-mode-linux-devel@lists.sourceforge.net

This patch defines syscall_get_arch() for the superh platform.  It does
so in both syscall_32.h and syscall_64.h.  I'm not certain if the
implementation in syscall_64.h couldn't just be used in syscall.h as I
can't really track the setting of CONFIG_64BIT...

This way is safe, but we might be able to combine these if a superh
person were able to review...

[v2]
	fixed indentation stoopidity (Sergei Shtylyov)
	use AUDIT_ARCH_SH instead of EM_SH
Based-on-patch-by: Richard Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: linux-sh@vger.kernel.org

syscall_get_arch() used to take a task as a argument.  It now uses
current.  Fix the doc text.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

The kernel only uses struct audit_rule_data.  We dropped support for
struct audit_rule a long time ago.  Drop the definition in the header
file.
Signed-off-by: Eric Paris <eparis@redhat.com>

Pull timer fixes from Thomas Gleixner:
 "Two fixes in the timer area:
   - a long-standing lock inversion due to a printk
   - suspend-related hrtimer corruption in sched_clock"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
  sched_clock: Avoid corrupting hrtimer tree during suspend

Pull ARM fixes from Russell King:
 "A few fixes for ARM.  Some of these are correctness issues:
   - TLBs must be flushed after the old mappings are removed by the DMA
     mapping code, but before the new mappings are established.
   - An off-by-one entry error in the Keystone LPAE setup code.

  Fixes include:
   - ensuring that the identity mapping for LPAE does not remove the
     kernel image from the identity map.
   - preventing userspace from trapping into kgdb.
   - fixing a preemption issue in the Intel iwmmxt code.
   - fixing a build error with nommu.

  Other changes include:
   - Adding a note about which areas of memory are expected to be
     accessible while the identity mapping tables are in place"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
  ARM: idmap: add identity mapping usage note
  ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
  ARM: fix alignment of keystone page table fixup
  ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
  ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable()
  ARM: DMA: ensure that old section mappings are flushed from the TLB

The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn)
should only be entered when a kgdb break instruction is executed
from the kernel. Otherwise, if kgdb is enabled, a userspace program
can cause the kernel to drop into the debugger by executing either
KGDB_BREAKINST or KGDB_COMPILED_BREAK.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add a note about the usage of the identity mapping; we do not support
accesses outside of the identity map region and kernel image while a
CPU is using the identity map.  This is because the identity mapping
may overwrite vmalloc space, IO mappings, the vectors pages, etc.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull vfs fixes from Al Viro:
 "This contains a couple of fixes - one is the aio fix from Christoph,
  the other a fallocate() one from Eric"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix check for fallocate on active swapfile
  direct-io: fix AIO regression

Pull x86 fix from Peter Anvin:
 "A single fix to not invoke the espfix code on Xen PV, as it turns out
  to oops the guest when invoked after all.  This patch leaves some
  amount of dead code, in particular unnecessary initialization of the
  espfix stacks when they won't be used, but in the interest of keeping
  the patch minimal that cleanup can wait for the next cycle"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/entry/xen: Do not invoke espfix64 on Xen

Pull staging driver bugfixes from Greg KH:
 "Here are some tiny staging driver bugfixes that I've had in my tree
  for the past week that resolve some reported issues.  Nothing major at
  all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Fix disassociated messages every 10 seconds
  staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
  staging: rtl8723au: rtw_resume(): release semaphore before exit on error
  iio:bma180: Missing check for frequency fractional part
  iio:bma180: Fix scale factors to report correct acceleration units
  iio: buffer: Fix demux table creation

Pull device mapper fixes from Mike Snitzer:
 "Fix dm bufio shrinker to properly zero-fill all fields.

  Fix race in dm cache that caused improper reporting of the number of
  dirty blocks in the cache"

* tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix race affecting dirty block count
  dm bufio: fully initialize shrinker

Pull ARM straggler SoC fix from Olof Johansson:
 "A DT bugfix for Nomadik that had an ambigouos double-inversion of a
  gpio line, and one MAINTAINER URL update that might as well go in now.

  We could hold off until the merge window, but then we'll just have to
  mark the DT fix for stable and it just seems like in total causing
  more work"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update Tegra Git URL
  ARM: nomadik: fix up double inversion in DT

nr_dirty is updated without locking, causing it to drift so that it is
non-zero (either a small positive integer, or a very large one when an
underflow occurs) even when there are no actual dirty blocks.  This was
due to a race between the workqueue and map function accessing nr_dirty
in parallel without proper protection.

People were seeing under runs due to a race on increment/decrement of
nr_dirty, see: https://lkml.org/lkml/2014/6/3/648

Fix this by using an atomic_t for nr_dirty.

Reported-by: roma1390@gmail.com
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

1d3d4437 ("vmscan: per-node deferred work") added a flags field to
struct shrinker assuming that all shrinkers were zero filled.  The dm
bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data
in flags.  So far the only defined flags bit is SHRINKER_NUMA_AWARE.
But there are proposed patches which add other bits to shrinker.flags
(e.g. memcg awareness).

Rather than simply initializing the shrinker, this patch uses kzalloc()
when allocating the dm_bufio_client to ensure that the embedded shrinker
and any other similar structures are zeroed.

This fixes theoretical over aggressive shrinking of dm bufio objects.
If the uninitialized dm_bufio_client.shrinker.flags contains
SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for
each numa node rather than just once.  This has been broken since 3.12.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.12+

clockevents_increase_min_delta() calls printk() from under
hrtimer_bases.lock. That causes lock inversion on scheduler locks because
printk() can call into the scheduler. Lockdep puts it as:

======================================================
[ INFO: possible circular locking dependency detected ]
3.15.0-rc8-06195-g939f04be #2 Not tainted
-------------------------------------------------------
trinity-main/74 is trying to acquire lock:
 (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c

but task is already holding lock:
 (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #5 (hrtimer_bases.lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197
       [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85
       [<81080792>] task_clock_event_start+0x3a/0x3f
       [<810807a4>] task_clock_event_add+0xd/0x14
       [<8108259a>] event_sched_in+0xb6/0x17a
       [<810826a2>] group_sched_in+0x44/0x122
       [<81082885>] ctx_sched_in.isra.67+0x105/0x11f
       [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b
       [<81082bf6>] __perf_install_in_context+0x8b/0xa3
       [<8107eb8e>] remote_function+0x12/0x2a
       [<8105f5af>] smp_call_function_single+0x2d/0x53
       [<8107e17d>] task_function_call+0x30/0x36
       [<8107fb82>] perf_install_in_context+0x87/0xbb
       [<810852c9>] SYSC_perf_event_open+0x5c6/0x701
       [<810856f9>] SyS_perf_event_open+0x17/0x19
       [<8142f8ee>] syscall_call+0x7/0xb

-> #4 (&ctx->lock){......}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

-> #3 (&rq->lock){-.-.-.}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81040873>] __task_rq_lock+0x33/0x3a
       [<8104184c>] wake_up_new_task+0x25/0xc2
       [<8102474b>] do_fork+0x15c/0x2a0
       [<810248a9>] kernel_thread+0x1a/0x1f
       [<814232a2>] rest_init+0x1a/0x10e
       [<817af949>] start_kernel+0x303/0x308
       [<817af2ab>] i386_start_kernel+0x79/0x7d

-> #2 (&p->pi_lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<810413dd>] try_to_wake_up+0x1d/0xd6
       [<810414cd>] default_wake_function+0xb/0xd
       [<810461f3>] __wake_up_common+0x39/0x59
       [<81046346>] __wake_up+0x29/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #1 (&tty->write_wait){-.....}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<81046332>] __wake_up+0x15/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #0 (&port_lock_key){-.....}:
       [<8104a62d>] __lock_acquire+0x9ea/0xc6d
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<811c60be>] serial8250_console_write+0x8c/0x10c
       [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
       [<8104f5d5>] console_unlock+0x1d7/0x398
       [<8104fb70>] vprintk_emit+0x3da/0x3e4
       [<81425f76>] printk+0x17/0x19
       [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
       [<8105c548>] clockevents_program_event+0xe7/0xf3
       [<8105cc1c>] tick_program_event+0x1e/0x23
       [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
       [<8103c49e>] __remove_hrtimer+0x5b/0x79
       [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
       [<8103cb4b>] hrtimer_cancel+0xd/0x18
       [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
       [<81080705>] task_clock_event_stop+0x20/0x64
       [<81080756>] task_clock_event_del+0xd/0xf
       [<81081350>] event_sched_out+0xab/0x11e
       [<810813e0>] group_sched_out+0x1d/0x66
       [<81081682>] ctx_sched_out+0xaf/0xbf
       [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

other info that might help us debug this:

Chain exists of:
  &port_lock_key --> &ctx->lock --> hrtimer_bases.lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hrtimer_bases.lock);
                               lock(&ctx->lock);
                               lock(hrtimer_bases.lock);
  lock(&port_lock_key);

 *** DEADLOCK ***

4 locks held by trinity-main/74:
 #0:  (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb
 #1:  (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
 #2:  (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66
 #3:  (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4

stack backtrace:
CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2
 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570
 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0
 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003
Call Trace:
 [<81426f69>] dump_stack+0x16/0x18
 [<81425a99>] print_circular_bug+0x18f/0x19c
 [<8104a62d>] __lock_acquire+0x9ea/0xc6d
 [<8104a942>] lock_acquire+0x92/0x101
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c60be>] serial8250_console_write+0x8c/0x10c
 [<8104af87>] ? lock_release+0x191/0x223
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
 [<8104f5d5>] console_unlock+0x1d7/0x398
 [<8104fb70>] vprintk_emit+0x3da/0x3e4
 [<81425f76>] printk+0x17/0x19
 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
 [<8105cc1c>] tick_program_event+0x1e/0x23
 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
 [<8103c49e>] __remove_hrtimer+0x5b/0x79
 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
 [<8103cb4b>] hrtimer_cancel+0xd/0x18
 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
 [<81080705>] task_clock_event_stop+0x20/0x64
 [<81080756>] task_clock_event_del+0xd/0xf
 [<81081350>] event_sched_out+0xab/0x11e
 [<810813e0>] group_sched_out+0x1d/0x66
 [<81081682>] ctx_sched_out+0xaf/0xbf
 [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
 [<8104416d>] ? __dequeue_entity+0x23/0x27
 [<81044505>] ? pick_next_task_fair+0xb1/0x120
 [<8142cacc>] __schedule+0x4c6/0x4cb
 [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108
 [<810475b0>] ? trace_hardirqs_off+0xb/0xd
 [<81056346>] ? rcu_irq_exit+0x64/0x77

Fix the problem by using printk_deferred() which does not call into the
scheduler.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Fix the broken check for calling sys_fallocate() on an active swapfile,
introduced by commit 0790b31b ("fs: disallow all fallocate
operation on active swapfile").
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The direct-io.c rewrite to use the iov_iter infrastructure stopped updating
the size field in struct dio_submit, and thus rendered the check for
allowing asynchronous completions to always return false.  Fix this by
comparing it to the count of bytes in the iov_iter instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>

Pull ACPI fix from Rafael Wysocki:
 "One commit that fixes a problem causing PNP devices to be associated
  with wrong ACPI device objects sometimes during device enumeration due
  to an incorrect check in a matching function.

  That problem was uncovered by the ACPI device enumeration rework in
  3.14"

* tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: Fix acpi_pnp_match()

Pull clock driver fix from Mike Turquette:
 "A single patch to re-enable audio which is broken on all DRA7
  SoC-based platforms.  Missed this one from the last set of fixes"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: ti: clk-7xx: Correct ABE DPLL configuration

Pull crypto fix from Herbert Xu:
 "This adds missing SELinux labeling to AF_ALG sockets which apparently
  causes SELinux (or at least the SELinux people) to misbehave :)"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - properly label AF_ALG socket

Pull SCSI barrier fix from James Bottomley:
 "This is a potential data corruption fix: If we get an error sending
  down a barrier, we simply ignore it meaning the barrier semantics get
  violated without anyone being any the wiser.  If the system crashes at
  this point, the filesystem potentially becomes corrupt.  Fix is to
  report errors on failed barriers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: handle flush errors properly

ABE DPLL frequency need to be lowered from 361267200
to 180633600 to facilitate the ATL requironments.
The dpll_abe_m2x2_ck clock need to be set to double
of ABE DPLL rate in order to have correct clocks
for audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Th AF_ALG socket was missing a security label (e.g. SELinux)
which means that socket was in "unlabeled" state.

This was recently demonstrated in the cryptsetup package
(cryptsetup v1.6.5 and later.)
See https://bugzilla.redhat.com/show_bug.cgi?id=1115120

This patch clones the sock's label from the parent sock
and resolves the issue (similar to AF_BLUETOOTH protocol family).

Cc: stable@vger.kernel.org
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

free_huge_page() is undefined without CONFIG_HUGETLBFS and there's no
need to filter PageHuge() page is such a configuration either, so avoid
exporting the symbol to fix a build error:

   In file included from kernel/kexec.c:14:0:
   kernel/kexec.c: In function 'crash_save_vmcoreinfo_init':
   kernel/kexec.c:1623:20: error: 'free_huge_page' undeclared (first use in this function)
     VMCOREINFO_SYMBOL(free_huge_page);
                       ^

Introduced by commit 8f1d26d0 ("kexec: export free_huge_page to
VMCOREINFO")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  Josh has moved
  kexec: export free_huge_page to VMCOREINFO
  mm: fix filemap.c pagecache_get_page() kernel-doc warnings
  mm: debugfs: move rounddown_pow_of_two() out from do_fault path
  memcg: oom_notify use-after-free fix
  hwpoison: call action_result() in failure path of hwpoison_user_mappings()
  hwpoison: fix hugetlbfs/thp precheck in hwpoison_user_mappings()
  rapidio/tsi721_dma: fix failure to obtain transaction descriptor
  mm, thp: do not allow thp faults to avoid cpuset restrictions
  mm/page-writeback.c: fix divide by zero in bdi_dirty_limits()

My IBM email addresses haven't worked for years; also map some
old-but-functional forwarding addresses to my canonical address.

Update my GPG key fingerprint; I moved to 4096R a long time ago.

Update description.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>