- 28 Jun, 2018 28 commits
-
-
Hugues Fruchet authored
Cleanup "active" field usage and enhance list management to avoid exceptions when releasing buffers on error or stopping streaming. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hugues Fruchet authored
Introduce WAIT_FOR_BUFFER state instead of "active" field checking to manage buffer starvation case. Signed-off-by:
-
Hugues Fruchet authored
Return buffer to V4L2 in error state if DMA error occurs. Signed-off-by:
-
Hugues Fruchet authored
Return silently instead of falling into error when running out of available buffers when restarting capture. Capture will be restarted when new buffers will be provided by V4L2 client. Signed-off-by:
-
Hugues Fruchet authored
Minor non-functional fixes around comments, variable namings and trace point enhancement. Signed-off-by:
-
Hugues Fruchet authored
DCMI can capture 5Mp raw frames, increase limit accordingly. Signed-off-by:
-
Niklas Söderlund authored
Prepare for adding a new IOCTL VIDIOC_SUBDEV_ENUMSTD which would enumerate the standards for a subdevice by breaking out the code which could be shared between the video and subdevice versions of this IOCTL. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Jacopo Mondi authored
Use the new renesas-ceu camera driver in ap325rxa board file instead of the soc_camera based sh_mobile_ceu_camera driver. Get rid of soc_camera specific components, and register CEU0 with a single video sensor (ov7725). Memory for the CEU video buffers is now reserved with membocks APIs and need to be declared as dma_coherent during machine initialization to remove that architecture specific part from CEU driver. The ap325rxa board file registers another camera (ncm03j) for which I found no driver in mainline kernel version, and that was configured/probed by sending i2c messages (of 'magic blobs) from the board file itself. I removed the sensor registration from this new version as it used soc_camera components that will be later removed. While at there update license to SPDX header and sort headers alphabetically. Compile tested only. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Jacopo Mondi authored
Use the new renesas-ceu camera driver is ms7724se board file instead of the soc_camera based sh_mobile_ceu_camera driver. Get rid of soc_camera specific components, and register CEU0 and CEU1 with no active video subdevices. Memory for the CEU video buffers is now reserved with membocks APIs and need to be declared as dma_coherent during machine initialization to remove that architecture specific part from CEU driver. While at there update license to SPDX header and sort headers alphabetically. No need to udapte the clock source names, as commit c2f9b05f ("media: arch: sh: ecovec: Use new renesas-ceu camera driver") already updated it to the new ceu driver name for all SH7724 boards (possibly breaking ms7724se before this commit). Compile tested only. Signed-off-by:
-
Jacopo Mondi authored
Use the new renesas-ceu camera driver in kfr2r09 board file instead of the soc_camera based sh_mobile_ceu_camera driver. Get rid of soc_camera specific components, and move clk and gpio handling away from board file, registering the clock source and the enable gpios for driver consumption. Memory for the CEU video buffers is now reserved with membocks APIs, and need to be declared as dma_coherent during machine initialization to remove that architecture specific part from CEU driver. While at there update license to SPDX header and sort headers alphabetically. No need to udapte the clock source names, as commit c2f9b05f ("media: arch: sh: ecovec: Use new renesas-ceu camera driver") already updated it to the new ceu driver name for all SH7724 boards (possibly breaking kfr2r09 before this commit). Compile tested only. Signed-off-by:
-
Jacopo Mondi authored
Remove soc_camera framework dependencies from rj54n1 sensor driver. - Handle clock - Handle GPIOs (named 'powerup' and 'enable') - Register the async subdevice - Remove g/s_mbus_config as they're deprecated. - Adjust build system - List the driver as maintained for 'Odd Fixes' as I don't have HW to test. This commits does not remove the original soc_camera based driver. Compiled tested only. Signed-off-by:
-
Jacopo Mondi authored
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. No modification to KConfig and Makefile as soc_camera framework dependencies need to be removed first in next commit. Signed-off-by:
-
Niklas Söderlund authored
Add the SoC specific information for Renesas r8a77965. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
When starting the VIN capture procedure we are not guaranteed that the first buffer written to is VnMB1 to which we assigned the first buffer queued. This is problematic for two reasons. Buffers might not be dequeued in the same order they where queued for capture. Future features planed for the VIN driver is support for outputting frames in SEQ_TB/BT format and to do that it's important that capture starts from the first buffer slot, VnMB1. We are guaranteed that capturing always happens in sequence (VnMB1 -> VnMB2 -> VnMB3 -> VnMB1). So drop up to two frames when starting capturing so that the driver always returns buffers in the same order they are queued and prepare for SEQ_TB/BT output. Signed-off-by:
-
Niklas Söderlund authored
The style for referring to ports and endpoint are wrong. Refer to them using lowercase and a unit address, port@x and endpoint@x. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
-
Niklas Söderlund authored
Signed-off-by:
-
Simon Horman authored
The example vin port node does not have an address and thus does not need address-cells or address size-properties. Signed-off-by:
-
Pavel Machek authored
Add support for LM3559, as found in Motorola Droid 4 phone, for example. SW interface seems to be identical. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Gabriel Fanelli authored
This patch fixes the checkpatch.pl issue: CHECK: Alignment should match open parenthesis Signed-off-by:
Gabriel Fanelli <gabrielfanelli61@gmail.com> Signed-off-by:
-
Jacopo Mondi authored
Add support for YUYV permutations, passing down to the subdevice the media bus format with components ordering that reflect the output pixel format one. Signed-off-by:
-
Nicholas Mc Guire authored
The of_node_put() was only covering the error branch but missed the success branch so the refcount for ep which of_graph_get_remote_port_parent() incremented on success would was not being decremented. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Nicholas Mc Guire authored
As there is no way this can loop it actually makes no sense to have a while(1){} around the body - all three possible paths end in a return statement. Fixes: commit c1d82b89 "[media] atmel-isi: move out of soc_camera to atmel" Signed-off-by: -
Nicholas Mc Guire authored
As the of_node_put() is unconditional here there is no need to have it twice. Signed-off-by:
Nicholas Mc Guire <hofrat@opentech.at> Signed-off-by:
-
Arnd Bergmann authored
The omap media driver can be built-in while the v4l2 core is a loadable module. This is a mistake and leads to link errors: drivers/media/platform/omap/omap_vout.o: In function `omap_vout_remove': omap_vout.c:(.text+0xec): undefined reference to `v4l2_device_unregister' omap_vout.c:(.text+0x140): undefined reference to `video_device_release' omap_vout.c:(.text+0x150): undefined reference to `video_unregister_device' omap_vout.c:(.text+0x15c): undefined reference to `v4l2_ctrl_handler_free' An explicit Kconfig dependency on VIDEO_V4L2 avoids the problem. I ran into this problem for the first time today during my randconfig builds, but could not find what caused it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Janani Sankara Babu authored
This patch solves multiple assignments warning shown by checkpatch script. Signed-off-by:
Janani Sankara Babu <jananis37@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
Recently binding of the Memory Controller has been extended, exposing the Memory Client reset controls and hence it is now a reset controller. Tegra video-decoder device is among the Memory Controller reset users, document the new optional VDE HW reset property. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in module description text. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alexey Khoroshilov authored
of_graph_get_next_endpoint() returns device_node with refcnt increased, but these is no of_node_put() for it. The patch adds one on error and normal paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by:
-
- 27 Jun, 2018 5 commits
-
-
Arnd Bergmann authored
With CONFIG_RC_CORE=m and VIDEO_CX231XX=y, we get a link failure: drivers/media/usb/cx231xx/cx231xx-input.o: In function `cx231xx_ir_init': cx231xx-input.c:(.text+0xd4): undefined reference to `rc_allocate_device' This narrows down the dependency so that only valid configurations are allowed. Fixes: 84545d2a ("media: cx231xx: Remove RC_CORE dependency") Signed-off-by:
-
Geert Uytterhoeven authored
The Renesas Fine Display Processor driver is used on Renesas R-Car SoCs only. Since commit 9b5ba0df ("ARM: shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate platform dependency than the legacy ARCH_SHMOBILE, hence use the former. This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Arnd Bergmann authored
The cadence media drivers can be built-in while the v4l2 core is a loadable module. This is a mistake and leads to link errors: drivers/media/v4l2-core/v4l2-fwnode.o: In function `v4l2_async_register_subdev_sensor_common': v4l2-fwnode.c:(.text+0x12f0): undefined reference to `v4l2_async_subdev_notifier_register' v4l2-fwnode.c:(.text+0x1304): undefined reference to `v4l2_async_register_subdev' v4l2-fwnode.c:(.text+0x1318): undefined reference to `v4l2_async_notifier_unregister' v4l2-fwnode.c:(.text+0x1338): undefined reference to `v4l2_async_notifier_cleanup' cdns-csi2rx.c:(.text+0x9f8): undefined reference to `v4l2_subdev_init' cdns-csi2rx.c:(.text+0xa78): undefined reference to `v4l2_async_register_subdev' drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_remove': cdns-csi2tx.c:(.text+0x88): undefined reference to `v4l2_async_unregister_subdev' drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_probe': cdns-csi2tx.c:(.text+0x884): undefined reference to `v4l2_subdev_init' cdns-csi2tx.c:(.text+0xa9c): undefined reference to `v4l2_async_register_subdev' An explicit Kconfig dependency on VIDEO_V4L2 avoids the problem. Fixes: 1fc3b37f ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
I ran into a randconfig build error with the new driver: drivers/media/platform/cadence/cdns-csi2tx.c: In function 'csi2tx_probe': drivers/media/platform/cadence/cdns-csi2tx.c:477:11: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration] kzalloc() is declared in linux/slab.h, so let's include this to make it build in all configurations. Fixes: 84b477e6d4bc ("media: v4l: cadence: Add Cadence MIPI-CSI2 TX driver") Signed-off-by: -
Sakari Ailus authored
The driver only supports streaming images flipped horizontally and vertically. In order to ensure that all current users will be fine if or when support for upright streaming is added, require the presence of the "rotation" control now. Signed-off-by:
"Lai, Jim" <jim.lai@intel.com> Signed-off-by:
-
- 24 Jun, 2018 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A pile of perf updates: Kernel side: - Remove an incorrect warning in uprobe_init_insn() when insn_get_length() fails. The error return code is handled at the call site. - Move the inline keyword to the right place in the perf ringbuffer code to address a W=1 build warning. Tooling: perf stat: - Fix metric column header display alignment - Improve error messages for default attributes, providing better output for error in command line. - Add --interval-clear option, to provide a 'watch' like printing perf script: - Show hw-cache events too perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry' Core: - Do not blindly assume that 'struct perf_evsel' can be obtained via a straight forward container_of() as there are call sites which hand in a plain 'struct hist' which is not part of a container. - Fix error index in the PMU event parser, so that error messages can point to the problematic token" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Move the inline keyword at the beginning of the function declaration uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn() perf script: Show hw-cache events perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry perf stat: Add event parsing error handling to add_default_attributes perf stat: Allow to specify specific metric column len perf stat: Fix metric column header display alignment perf stat: Use only color_fprintf call in print_metric_only perf stat: Add --interval-clear option perf tools: Fix error index for pmu event parser perf hists: Reimplement hists__has_callchains() perf hists browser gtk: Use hist_entry__has_callchains() perf hists: Make hist_entry__has_callchains() work with 'perf c2c' perf hists: Save the callchain_size in struct hist_entry -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rseq fixes from Thomas Gleixer: "A pile of rseq related fixups: - Prevent infinite recursion when delivering SIGSEGV - Remove the abort of rseq critical section on fork() as syscalls inside rseq critical sections are explicitely forbidden. So no point in doing the abort on the child. - Align the rseq structure on 32 bytes in the ARM selftest code. - Fix file permissions of the test script" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Avoid infinite recursion when delivering SIGSEGV rseq/cleanup: Do not abort rseq c.s. in child on fork() rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes rseq/selftests: Make run_param_test.sh executable -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "Two fixlets for the EFI maze: - Properly zero variables to prevent an early boot hang on EFI mixed mode systems - Fix the fallout of merging the 32bit and 64bit variants of EFI PCI related code which ended up chosing the 32bit variant of the actual EFi call invocation which leads to failures on 64bit" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix incorrect invocation of PciIo->Attributes() efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "Two tiny fixes: - Add the missing machine_real_restart() to objtools noreturn list so it stops complaining - Fix a trivial comment typo" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel.h: Fix a typo in comment objtool: Add machine_real_restart() to the noreturn list -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make Xen PV guest deal with speculative store bypass correctly - Address more fallout from the 5-Level pagetable handling. Undo an __initdata annotation to avoid section mismatch and malfunction when post init code would touch the freed variable. - Handle exception fixup in math_error() before calling notify_die(). The reverse call order incorrectly triggers notify_die() listeners for soemthing which is handled correctly at the site which issues the floating point instruction. - Fix an off by one in the LLC topology calculation on AMD - Handle non standard memory block sizes gracefully un UV platforms - Plug a memory leak in the microcode loader - Sanitize the purgatory build magic - Add the x86 specific device tree bindings directory to the x86 MAINTAINER file patterns" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix 'no5lvl' handling Revert "x86/mm: Mark __pgtable_l5_enabled __initdata" x86/CPU/AMD: Fix LLC ID bit-shift calculation MAINTAINERS: Add file patterns for x86 device tree bindings x86/microcode/intel: Fix memleak in save_microcode_patch() x86/platform/UV: Add kernel parameter to set memory block size x86/platform/UV: Use new set memory block size function x86/platform/UV: Add adjustable set memory block size function x86/build: Remove unnecessary preparation for purgatory Revert "kexec/purgatory: Add clean-up for purgatory directory" x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths x86: Call fixup_exception() before notify_die() in math_error() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti fixes from Thomas Gleixner: "Two small updates for the speculative distractions: - Make it more clear to the compiler that array_index_mask_nospec() is not subject for optimizations. It's not perfect, but ... - Don't report XEN PV guests as vulnerable because their mitigation state depends on the hypervisor. Report unknown and refer to the hypervisor requirement" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec() x86/pti: Don't report XenPV as vulnerable
-
