- 16 Nov, 2012 4 commits
-
-
Shawn Guo authored
imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Setup the GPIO7_11 pin as interrupt to the DA9053 and also rename the regulator nodes so that they match with the datasheet. This allows probing of DA9053 to succeed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.2: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Sascha Hauer authored
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 23 Oct, 2012 1 commit
-
-
Shawn Guo authored
With being part of multi-platform support, SMP can be enabled by other platform even when SOC_IMX6Q is deselected. It leads to a situation that arch/arm/mach-imx/platsmp.c is built without HAVE_IMX_SRC selection which will cause build error. For example, the following link errors will be seen when building imx5 with other v7 platforms. arch/arm/mach-imx/built-in.o: In function `imx_cpu_die': platform-ahci-imx.c:(.text+0x219c): undefined reference to `imx_enable_cpu' arch/arm/mach-imx/built-in.o: In function `imx_boot_secondary': platform-ahci-imx.c:(.cpuinit.text+0x14): undefined reference to `imx_set_cpu_jump' platform-ahci-imx.c:(.cpuinit.text+0x20): undefined reference to `imx_enable_cpu' Select HAVE_IMX_SRC as long as SMP is enabled to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 19 Oct, 2012 1 commit
-
-
Fabio Estevam authored
Since commit c5a0d497(ARM: imx: enable multi-platform build), ARCH_MXC is selected by the following logic: config ARCH_MXC def_bool y if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 , which causes build error on vexpress_defconfig: arch/arm/mach-imx/hotplug.c:49: undefined reference to `imx_enable_cpu' arch/arm/mach-imx/platsmp.c:57: undefined reference to `imx_set_cpu_jump' arch/arm/mach-imx/platsmp.c:58: undefined reference to `imx_enable_cpu' Make ARCH_MXC a user selectable option, so that it does not get built by default on other defconfigs that select ARCH_MULTI_V4_V5 or ARCH_MULTI_V6_V7. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 15 Oct, 2012 31 commits
-
-
Shawn Guo authored
It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
mxc_device_init() is a core_initcall function used to register devices for mxc_aips_bus and mxc_ahb_bus, which are needed by gpio and dma device registration. Instead of being a core_initcall function, we have it called in soc specific initialization function before gpio and dma devices get registered, so that it will not be called for other platforms when we enable multi-platform support for imx. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The only mach/irqs.h user outside arch/arm/mach-imx is sound/soc/fsl/imx-pcm-fiq.c, which refers to mxc_set_irq_fiq(). Move the declaration into include/linux/platform_data/asoc-imx-ssi.h, so that we can remove mach/irqs.h includsion from imx-pcm-fiq.c. Inside arch/arm/mach-imx, the only users to mach/irqs.h are avic.c and tzic.c for referring to macro FIQ_START. Let's move the macro into irq-common.h and get rid of mach/irqs.h completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org
-
Shawn Guo authored
It moves a bunch of header files included in hardware.h and itself from mach-imx/include/mach to mach-imx, and updates users to include hardware.h rather than mach/hardware.h. The files in mach-imx/devices will need to include "../hardware.h". Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Cc: linux-mmc@vger.kernel.org
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Cc: linux-media@vger.kernel.org
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
Shawn Guo authored
Retrieve MEM and IRQ from resources rather than directly using the value by including machine header. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
Shawn Guo authored
Use managed functions devm_kzalloc and devm_request_irq instead to make the error patch simpler. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: rtc-linux@googlegroups.com
-
Shawn Guo authored
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org
-
Shawn Guo authored
This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
-
Shawn Guo authored
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
-
Shawn Guo authored
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org
-
Shawn Guo authored
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org
-
Shawn Guo authored
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org
-
Shawn Guo authored
The inclusion of mach/hardware.h is not used in imx-sdma driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com>
-
Shawn Guo authored
The header ipu.h really belongs to dma subsystem rather than imx platform. Rename it to ipu-dma.h and put it into include/linux/dma/. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-media@vger.kernel.org Cc: linux-fbdev@vger.kernel.org
-
Shawn Guo authored
The header mach/dma-mx1-mx2.h is used nowhere. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Rename mach-imx/include/mach/ulpi.h to mach-imx/ulpi.h, and update users to include ulpi.h rather than mach/ulpi.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Rename mach-imx/include/mach/iram.h to mach-imx/iram.h, and update users to include iram.h rather than mach/iram.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Rename mach-imx/include/mach/iim.h to mach-imx/iim.h, and update users to include iim.h rather than mach/iim.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Rename mach-imx/include/mach/cpuidle.h to mach-imx/cpuidle.h, and update users to include cpuidle.h rather than mach/cpuidle.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
Rename mach-imx/include/mach/common.h to mach-imx/common.h and update all users to include common.h rather than mach/common.h. It also removes an unneeded inclusion to common.h in mach-imx/devices/devices.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
It's really unnecessary to have plat-mxc, and let's merge it into mach-imx. It's pretty much just a bunch of file renaming and Kconfig/Makefile merge. To make the change less invasive, we keep using Kconfig symbol CONFIG_ARCH_MXC for mach-imx sub-architecture. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
It moves platform device code from plat-mxc into mach-imx. Along with that, header devices-common.h gets moved from plat-mxc/include/mach/ into mach-imx/devices/. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
There is no need for device-imx*.h to include <soc>.h. Remove them and fix one indirect inclusion in mach-mx31ads.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
The board files in mach-imx are the only users of iomux drivers and headers. Move them into mach-imx from plat-mxc. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
The headers that are only used by board files do not necessarily need to be in plat-mxc/include/mach. Move them to the same place as those board files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
- 14 Oct, 2012 3 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-