Add ipv6 support to the be2net driver.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds UFO to the list of GSO features with a software
fallback.  This allows UFO to be used even if the hardware does
not support it.

In particular, this allows us to test the UFO fallback, as it
has been reported to not work in some cases.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

AF_UNIX references this, and can be built as a module,
so...
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the restriction that only allows connecting to a unix domain
socket identified by unix path that is in the same network namespace.

Crossing network namespaces is always tricky and we did not support
this at first, because of a strict policy of don't mix the namespaces.
Later after Pavel proposed this we did not support this because no one
had performed the audit to make certain using unix domain sockets
across namespaces is safe.

What fundamentally makes connecting to af_unix sockets in other
namespaces is safe is that you have to have the proper permissions on
the unix domain socket inode that lives in the filesystem.  If you
want strict isolation you just don't create inodes where unfriendlys
can get at them, or with permissions that allow unfriendlys to open
them.  All nicely handled for us by the mount namespace and other
standard file system facilities.

I looked through unix domain sockets and they are a very controlled
environment so none of the work that goes on in dev_forward_skb to
make crossing namespaces safe appears needed, we are not loosing
controll of the skb and so do not need to set up the skb to look like
it is comming in fresh from the outside world.  Further the fields in
struct unix_skb_parms should not have any problems crossing network
namespaces.

Now that we handle SCM_CREDENTIALS in a way that gives useable values
across namespaces.  There does not appear to be any operational
problems with encouraging the use of unix domain sockets across
containers either.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In unix_skb_parms store pointers to struct pid and struct cred instead
of raw uid, gid, and pid values, then translate the credentials on
reception into values that are meaningful in the receiving processes
namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Start capturing not only the userspace pid, uid and gid values of the
sending process but also the struct pid and struct cred of the sending
process as well.

This is in preparation for properly supporting SCM_CREDENTIALS for
sockets that have different uid and/or pid namespaces at the different
ends.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

scm_send occasionally allocates state in the scm_cookie, so I have
modified netlink_sendmsg to guarantee that when scm_send succeeds
scm_destory will be called to free that state.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use struct pid and struct cred to store the peer credentials on struct
sock.  This gives enough information to convert the peer credential
information to a value relative to whatever namespace the socket is in
at the time.

This removes nasty surprises when using SO_PEERCRED on socket
connetions where the processes on either side are in different pid and
user namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

To keep the coming code clear and to allow both the sock
code and the scm code to share the logic introduce a
fuction to translate from struct cred to struct ucred.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define what happens when a we view a uid from one user_namespace
in another user_namepece.

- If the user namespaces are the same no mapping is necessary.

- For most cases of difference use overflowuid and overflowgid,
  the uid and gid currently used for 16bit apis when we have a 32bit uid
  that does fit in 16bits.  Effectively the situation is the same,
  we want to return a uid or gid that is not assigned to any user.

- For the case when we happen to be mapping the uid or gid of the
  creator of the target user namespace use uid 0 and gid as confusing
  that user with root is not a problem.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reorder the fields in scm_cookie so they pack better on 64bit.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changed the driver version number to 5.0.4
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver was not detecting the presence of NIC partitioning capability of the
firmware properly. Now, it checks the eswitch set bit in the FW capabilities
register and accordingly sets the driver mode as NPAR capable or not.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Discard the ACK if we find options that do not match current sysctl
settings.

Previously it was possible to create a connection with sack, wscale,
etc. enabled even if the feature was disabled via sysctl.

Also remove an unneeded call to tcp_sack_reset() in
cookie_check_timestamp: Both call sites (cookie_v4_check,
cookie_v6_check) zero "struct tcp_options_received", hand it to
tcp_parse_options() (which does not change tcp_opt->num_sacks/dsack)
and then call cookie_check_timestamp().

Even if num_sacks/dsacks were changed, the structure is allocated on
the stack and after cookie_check_timestamp returns only a few selected
members are copied to the inet_request_sock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches.

Thats a bit unfortunate, since old size was exactly 64 bytes.

This can be solved, using an union between this rcu_head an four fields,
that are normally used only when a refcount is taken on inet_peer.
rcu_head is used only when refcnt=-1, right before structure freeing.

Add a inet_peer_refcheck() function to check this assertion for a while.

We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based upon a report by Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>

Followup of commit aa1039e7 (inetpeer: RCU conversion)

Unused inet_peer entries have a null refcnt.

Using atomic_inc_not_zero() in rcu lookups is not going to work for
them, and slow path is taken.

Fix this using -1 marker instead of 0 for deleted entries.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that RCU debugging checks for matching rcu_dereference calls
and rcu_read_lock, we need to use the correct primitives or face
nasty warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The version of br_netpoll_send_skb used when netpoll is off is
missing a const thus causing a warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In old kernels, NET_SKB_PAD was defined to 16.

Then commit d6301d3d (net: Increase default NET_SKB_PAD to 32), and
commit 18e8c134 (net: Increase NET_SKB_PAD to 64 bytes) increased it
to 64.

While first patch was governed by network stack needs, second was more
driven by performance issues on current hardware. Real intent was to
align data on a cache line boundary.

So use max(32, L1_CACHE_BYTES) instead of 64, to be more generic.

Remove microblaze and powerpc own NET_SKB_PAD definitions.

Thanks to Alexander Duyck and David Miller for their comments.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Third param (work) is unused, remove it.

Remove __inline__ and inline qualifiers.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of doing one atomic operation per frag, we can factorize them.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When syncookies are in effect, req->iif is left uninitialized.
In case of e.g. link-local addresses the route lookup then fails
and no syn-ack is sent.

Rearrange things so ->iif is also initialized in the syncookie case.

want_cookie can only be true when the isn was zero, thus move the want_cookie
check into the "!isn" branch.

Cc: Glenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ndo_get_stats still returns struct net_device_stats *; there is
no struct net_device_stats64.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SKBs hold onto resources that can't be held indefinitely, such as TCP
socket references and netfilter conntrack state.  So if a packet is left
in TX ring for a long time, there might be a TCP socket that cannot be
closed and freed up.

Current blackfin EMAC driver always reclaim and free used tx skbs in future
transfers. The problem is that future transfer may not come as soon as
possible. This patch start a timer after transfer to reclaim and free skb.
There is nearly no performance drop with this patch.

TX interrupt is not enabled because of a strange behavior of the Blackfin EMAC.
If EMAC TX transfer control is turned on, endless TX interrupts are triggered
no matter if TX DMA is enabled or not. Since DMA walks down the ring automatically,
TX transfer control can't be turned off in the middle. The only way is to disable
TX interrupt completely.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inetpeer currently uses an AVL tree protected by an rwlock.

It's possible to make most lookups use RCU

1) Add a struct rcu_head to struct inet_peer

2) add a lookup_rcu_bh() helper to perform lockless and opportunistic
lookup. This is a normal function, not a macro like lookup().

3) Add a limit to number of links followed by lookup_rcu_bh(). This is
needed in case we fall in a loop.

4) add an smp_wmb() in link_to_pool() right before node insert.

5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take
last reference to an inet_peer, since lockless readers could increase
refcount, even while we hold peers.lock.

6) Delay struct inet_peer freeing after rcu grace period so that
lookup_rcu_bh() cannot crash.

7) inet_getpeer() first attempts lockless lookup.
   Note this lookup can fail even if target is in AVL tree, but a
concurrent writer can let tree in a non correct form.
   If this attemps fails, lock is taken a regular lookup is performed
again.

8) convert peers.lock from rwlock to a spinlock

9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because
rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 ->
128 bytes)
In a future patch, this is probably possible to revert this part, if rcu
field is put in an union to share space with rid, ip_id_count, tcp_ts &
tcp_ts_stamp. These fields being manipulated only with refcnt > 0.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the code that handles the error case when cnic_cm_abort() cannot
proceed normally.  We cannot just set the csk->state and we must
go through cnic_ready_to_close() to handle all the conditions.  We
also add error return code in cnic_cm_abort().
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Combine RESET_RECEIVED and RESET_COMP logic and fix race condition
between these 2 events and cnic_cm_close().  In particular, we need
to (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) before we
update csk->state.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move chip-specific code to the respective chip's ->close_conn() functions
for better code organization.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So that bnx2i can handle the error condition immediately and not have to
wait for timeout.

Signed-off-by: Michael Chan <mchan@broadcom.com.
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change corrects issues where macvlan was not correctly triggering
promiscuous mode on ixgbe due to the filters not being correctly set.  It
also corrects the fact that VF rar filters were being overwritten when the
PF was reset.

CC: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unify tcp flag macros: TCPHDR_FIN, TCPHDR_SYN, TCPHDR_RST, TCPHDR_PSH,
TCPHDR_ACK, TCPHDR_URG, TCPHDR_ECE and TCPHDR_CWR. TCBCB_FLAG_* are replaced
with the corresponding TCPHDR_*.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
 include/net/tcp.h                      |   24 ++++++-------
 net/ipv4/tcp.c                         |    8 ++--
 net/ipv4/tcp_input.c                   |    2 -
 net/ipv4/tcp_output.c                  |   59 ++++++++++++++++-----------------
 net/netfilter/nf_conntrack_proto_tcp.c |   32 ++++++-----------
 net/netfilter/xt_TCPMSS.c              |    4 --
 6 files changed, 58 insertions(+), 71 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

Register net_bridge_port pointer as rx_handler data pointer. As br_port is
removed from struct net_device, another netdev priv_flag is added to indicate
the device serves as a bridge port. Also rcuized pointers are now correctly
dereferenced in br_fdb.c and in netfilter parts.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register macvlan_port pointer as rx_handler data pointer. As macvlan_port is
removed from struct net_device, another netdev priv_flag is added to indicate
the device serves as a macvlan port.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add possibility to register rx_handler data pointer along with a rx_handler.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are multiple problems with the newly added netpoll support:

1) Use-after-free on each netpoll packet.
2) Invoking unsafe code on netpoll/IRQ path.
3) Breaks when netpoll is enabled on the underlying device.

This patch fixes all of these problems.  In particular, we now
allocate proper netpoll structures for each underlying device.

We only allow netpoll to be enabled on the bridge when all the
devices underneath it support netpoll.  Once it is enabled, we
do not allow non-netpoll devices to join the bridge (until netpoll
is disabled again).

This allows us to do away with the npinfo juggling that caused
problem number 1.

Incidentally this patch fixes number 2 by bypassing unsafe code
such as multicast snooping and netfilter.
Reported-by: Qianfeng Zhang <frzhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the helper netpoll_tx_running for use within
ndo_start_xmit.  It returns non-zero if ndo_start_xmit is being
invoked by netpoll, and zero otherwise.

This is currently implemented by simply looking at the hardirq
count.  This is because for all non-netpoll uses of ndo_start_xmit,
IRQs must be enabled while netpoll always disables IRQs before
calling ndo_start_xmit.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the functions __netpoll_setup/__netpoll_cleanup
which is designed to be called recursively through ndo_netpoll_seutp.

They must be called with RTNL held, and the caller must initialise
np->dev and ensure that it has a valid reference count.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds ndo_netpoll_setup as the initialisation primitive
to complement ndo_netpoll_cleanup.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>