- 12 Mar, 2006 40 commits
-
-
andrew.vasquez@qlogic.com authored
Only support ZIO mode 6 on specific ISP types. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
andrew.vasquez@qlogic.com authored
Signed-off-by:
-
andrew.vasquez@qlogic.com authored
Reserved-bit 15 must set when updating the swing/emphasis values. Signed-off-by:
-
andrew.vasquez@qlogic.com authored
Resync with latest NVRAM subsystem ID list. Signed-off-by:
-
andrew.vasquez@qlogic.com authored
As new 23xx firmware will accomidate ISP63xx types. Signed-off-by:
-
andrew.vasquez@qlogic.com authored
Chip is similar in form to our ISP24xx offering. Signed-off-by:
-
andrew.vasquez@qlogic.com authored
Signed-off-by:
-
Dave Jones authored
If the scsi_alloc_queue or the slave_alloc calls in scsi_alloc_device fail, we forget to release the locally allocated sdev on the failure path. Coverity #609 Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Ralf Baechle authored
Nothing outside sgiwd93.c references them. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alexey Dobriyan authored
It's much, much more readable now. Signed-off-by:
-
Alexey Dobriyan authored
* struct SCCBcard => struct sccb_card * PSCCBcard => struct sccb_card * * SCCBCARD => struct sccb_card Signed-off-by:
-
Alexey Dobriyan authored
* struct NVRAMInfo => struct nvram_info * PNVRamInfo => struct nvram_info * * NVRAMINFO => struct nvram_info Signed-off-by:
-
Alexey Dobriyan authored
* struct SCCBMgr_tar_info => struct sccb_mgr_tar_info * PSCCBMgr_tar_info => struct sccb_mgr_tar_info * * SCCBMGR_TAR_INFO => struct sccb_mgr_tar_info Signed-off-by:
-
Alexey Dobriyan authored
* struct SCCBMgr_info => struct sccb_mgr_info * PSCCBMGR_INFO => struct sccb_mgr_info * * SCCBMGR_INFO => struct sccb_mgr_info Signed-off-by:
-
Alexey Dobriyan authored
* struct _SCCB => struct sccb * PSCCB => struct sccb * * SCCB => struct sccb Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
* Remove unused #define's * Remove unused typedefs. * Remove prototypes for non-existing functions. Signed-off-by:
-
Rene Herman authored
Add device-major aliases in drivers/scsi, allowing kmod autoload: MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR) MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR) MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR) Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Hannes Reinecke authored
Because of some quirk in the SCSI spec the aic79xx driver chose to force a renegotiation when sending an inquiry. This should better be handled by the upper layers if required at all. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Hannes Reinecke authored
This patch fixes the aic79xx driver to properly respond to BIOS settings. Signed-off-by:
-
Hannes Reinecke authored
On certain systems the driver seems to hit upon some "scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state. According to Adaptec engineers this message is harmless. So as not to confuse user we can as well disable the internal card state dump and just print out the message itself. Signed-off-by:
-
Hannes Reinecke authored
This patch updates the error recovery. Routines for TARGET RESET and ABORT COMMAND are split up as the logic is quite dissimilar. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
This patch converts aic79xx to use the midlayer-supplied tcq functions. We also set the queuedepth to '1' if tcq is disabled; the aic79xx driver gets confused otherwise. Will set it back to '2' once I figure out how to queue requests in the driver. Signed-off-by:
-
Hannes Reinecke authored
This patch removes the need for platform_data->qfrozen. We're now using complete() instead of semaphores thus simplifying ahd_freeze_simq() quite a lot. This also fixes some deadlocks in the recovery code (again). Signed-off-by:
-
James Smart authored
Change version number to 8.1.4 Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
-
James Smart authored
Two misc fixes: - Fix deadlock caused by return with host_lock held in lpfc_findnode_did - Initialize all fields of the allocated mail box structure to zero. Was causing some sysfs mailbox commands to fail immediately after load. Signed-off-by:
-
James Smart authored
Introduce lpfc_reset_barrier() function for resets on dual channel adapters Workaround for a hardware errata on dual channel asics. There is a potential for the chip to lock up on a reset if a shared dma engine is in use. The (ugly) work around requires a reset process which uses a mailbox command to synchronize the independent channels prior to the reset to avoid the issue. Unfortunately, the timing windows required to ensure this workaround succeeds are very specific, meaning we can't release the cpu during the barrier. Signed-off-by:
-
James Smart authored
Fixed a timer panic due to timer firing after freeing ndlp Signed-off-by:
-
James Smart authored
Fixed RSCN handling when a PLOGI is in retry. Signed-off-by:
-
James Smart authored
Fix Discovery processing for NPorts that change their NPortId on the fly due to a cable swap. Signed-off-by:
-
Vasily Averin authored
i2o_exec_lct_modified() does not release memory allocated for work_struct. Signed-off-by:
Vasily Averin <vvs@sw.ru> Although your patch is the same, i've rewritten it a little bit for naming consistency in the I2O driver. Acked-by:
Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:
-
