- 24 Apr, 2017 15 commits
-
-
Mike Maloney authored
Fanout uses a per net global namespace. A process that intends to create a new fanout group can accidentally join an existing group. It is not possible to detect this. Add socket option PACKET_FANOUT_FLAG_UNIQUEID. When specified the supplied fanout group id must be set to 0, and the kernel chooses an id that is not already in use. This is an ephemeral flag so that other sockets can be added to this group using setsockopt, but NOT specifying this flag. The current getsockopt(..., PACKET_FANOUT, ...) can be used to retrieve the new group id. We assume that there are not a lot of fanout groups and that this is not a high frequency call. The method assigns ids starting at zero and increases until it finds an unused id. It keeps track of the last assigned id, and uses it as a starting point to find new ids. Signed-off-by:
Mike Maloney <maloney@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mike Maloney authored
sock_fanout_open no longer sets the size of packet_socket ring, so stop passing the parameter. Signed-off-by:
-
Roger Quadros authored
Some boards [1] leave the PHYs at an invalid state during system power-up or reset thus causing unreliability issues with the PHY which manifests as PHY not being detected or link not functional. To fix this, these PHYs need to be RESET via a GPIO connected to the PHY's RESET pin. Some boards have a single GPIO controlling the PHY RESET pin of all PHYs on the bus whereas some others have separate GPIOs controlling individual PHY RESETs. In both cases, the RESET de-assertion cannot be done in the PHY driver as the PHY will not probe till its reset is de-asserted. So do the RESET de-assertion in the MDIO bus driver. [1] - am572x-idk, am571x-idk, a437x-idk Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
David S. Miller authored
Stefan Hajnoczi says: ==================== VSOCK: vsockmon virtual device to monitor AF_VSOCK sockets. v5: * Change vsock_deliver_tap() API to avoid unnecessary skb creation [Jorgen] * Fix skb leak when no taps are registered [Jorgen] * s/cpu_to_le16(pkt->hdr.op)/le16_to_cpu(pkt->hdr.op)/ [Michael] * Add af_vsock_tap.c and vsockmon.[ch] to MAINTAINERS * checkpatch.pl and sparse fixes v4: * Add explicit reserved padding field to struct af_vsockmon_hdr and drop __attribute__((packed)) [Michael, DaveM] * Call synchronize_net() before module_put() [Michael] v3: * Hook virtio_transport.c (guest driver), not just drivers/vhost/vsock.c (host driver) * Fix DEFAULT_MTU macro definition [Zhu Yanjun] * Rename af_vsockmon_hdr->t field ->transport for clarity * Update .ndo_get_stats64() return type since it has changed * Include missing <linux/module.h> header in af_vsock_tap.c This is a continuation of Gerard Garcia's work on the vsockmon packet capture interface for AF_VSOCK. Packet capture is an essential feature for network communication. Gerard began addressing this feature gap in his Google Summer of Code 2016 project. I have cleaned up, rebased, and retested the v2 series he posted previously. The design follows the nlmon packet capture interface closely. This is because vsock has the same problem as netlink: there is no netdev on which packets can be captured. The nlmon driver is a synthetic netdev purely for the purpose of enabling packet capture. We follow the same approach here with vsockmon. See include/uapi/linux/vsockmon.h in this series for details on the packet layout. How to try it: 1. Build tcpdump with vsockmon patches: $ git clone -b vsock https://github.com/stefanha/libpcap $ (cd libcap && ./configure && make) $ git clone -b vsock https://github.com/stefanha/tcpdump $ (cd tcpdump && ./configure && make) 2. Build nc-vsock (a netcat-like tool): $ git clone https://github.com/stefanha/nc-vsock $ (cd nc-vsock && make) 3. Launch a virtual machine: # modprobe vhost_vsock # qemu-system-x86_64 -M accel=kvm -m 1024 -cpu host \ -drive if=virtio,file=test.img,format=raw \ -device vhost-vsock-pci,guest-cid=3 (Assumes guest is running a kernel with this patch) 4. Capture AF_VSOCK traffic in guest and/or host: # modprobe vsockmon # ip link add type vsockmon # ip link set vsockmon0 up # tcpdump -i vsockmon0 -vvv 5. Communicate! (host)$ nc-vsock -l 1234 (guest)$ nc-vsock 2 1234 ==================== Signed-off-by:
-
Gerard Garcia authored
The virtio drivers deal with struct virtio_vsock_pkt. Add virtio_transport_deliver_tap_pkt(pkt) for handing packets to the vsockmon device. We call virtio_transport_deliver_tap_pkt(pkt) from net/vmw_vsock/virtio_transport.c and drivers/vhost/vsock.c instead of common code. This is because the drivers may drop packets before handing them to common code - we still want to capture them. Signed-off-by:
Gerard Garcia <ggarcia@deic.uab.cat> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Gerard Garcia authored
Add vsockmon virtual network device that receives packets from the vsock transports and exposes them to user space. Based on the nlmon device. Signed-off-by:
-
Gerard Garcia authored
Add tap functions that can be used by the vsock transports to deliver packets to vsockmon virtual network devices. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Quite a lot of patches for rtlwifi and iwlwifi this time, but changes also for other active wireless drivers. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers iwlwifi * work to support A000 devices continues * add support for FW API 30 * add Geographical and Dynamic Specific Absorption Rate (SAR) support * support a few new PCI device IDs rtlwifi * work on adding Bluetooth coexistance support, not finished yet ==================== Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: Dcbx/dcbnl enhancements. The series has set of enhancements for dcbx/dcbnl implementation of qed/qede drivers. - Patches (1) & (3) capture the sematic and debug changes. - Patch (2) adds the driver support for populating RoCEv2 dcb data. - Patch (4) adds the required support for reading/configuring the IEEE selection field (SF). - Patch (5) adds the support for configuring the static dcbx mode. Please consider applying this to 'net-next' branch. ==================== Signed-off-by: -
sudarsana.kalluru@cavium.com authored
The patch adds driver support for static/local dcbx mode. In this mode adapter brings up the dcbx link with locally configured parameters instead of performing the dcbx negotiation with the peer. The feature is useful when peer device/switch doesn't support dcbx. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
sudarsana.kalluru@cavium.com authored
Signed-off-by:
-
sudarsana.kalluru@cavium.com authored
Signed-off-by:
-
sudarsana.kalluru@cavium.com authored
In the older firmware there was no distinction between RoCE and RoCEv2 whereas the newer firmware (8.15.3.0) allows us to configure each independently. Driver need to populate the RoCEv2 data in its specific structure. Signed-off-by:
-
sudarsana.kalluru@cavium.com authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-04-20 This series contains updates to e1000, e1000e, igb/vf and ixgb. Tobias Klauser cleans up e1000, ixgb and igbvf from having a local function or structure for netdev stats. Bernd Faust fixes an issue for 82579 devices, where the clock frequency was being incorrectly set for these devices. These devices only support 96MHz, so make sure they are set to use only that. Yury Kylulin extends the work Jake and Alex did for ixgbe in MAC filter handling into the igb driver. Kim Tatt Chuah enables igb to wake up by packet and to read the necessary Wake Up Status (WUS) and Wake Up Packet Memory (WUPM) registers. ==================== Signed-off-by:
-
- 23 Apr, 2017 1 commit
-
-
Alexei Starovoitov authored
update the list and remove 'in the future' statement, since all still alive 64-bit architectures now do eBPF JIT. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
- 22 Apr, 2017 4 commits
-
-
David S. Miller authored
Signed-off-by:
-
David S. Miller authored
This is an eBPF JIT for sparc64. All major features are supported. All tests under tools/testing/selftests/bpf/ pass. Signed-off-by: -
David S. Miller authored
This is in preparation for adding the 64-bit eBPF JIT. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by:
-
- 21 Apr, 2017 20 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfix from Bruce Fields: "Fix a 4.11 regression that triggers a BUG() on an attempt to use an unsupported NFSv4 compound op" * tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linux: nfsd: fix oops on unsupported operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't race in IPSEC dumps, from Yuejie Shi. 2) Verify lengths properly in IPSEC reqeusts, from Herbert Xu. 3) Fix out of bounds access in ipv6 segment routing code, from David Lebrun. 4) Don't write into the header of cloned SKBs in smsc95xx driver, from James Hughes. 5) Several other drivers have this bug too, fix them. From Eric Dumazet. 6) Fix access to uninitialized data in TC action cookie code, from Wolfgang Bumiller. 7) Fix double free in IPV6 segment routing, again from David Lebrun. 8) Don't let userspace set the RTF_PCPU flag, oops. From David Ahern. 9) Fix use after free in qrtr code, from Dan Carpenter. 10) Don't double-destroy devices in ip6mr code, from Nikolay Aleksandrov. 11) Don't pass out-of-range TX queue indices into drivers, from Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) netpoll: Check for skb->queue_mapping ip6mr: fix notification device destruction bpf, doc: update bpf maintainers entry net: qrtr: potential use after free in qrtr_sendmsg() bpf: Fix values type used in test_maps net: ipv6: RTF_PCPU should not be settable from userspace gso: Validate assumption of frag_list segementation kaweth: use skb_cow_head() to deal with cloned skbs ch9200: use skb_cow_head() to deal with cloned skbs lan78xx: use skb_cow_head() to deal with cloned skbs sr9700: use skb_cow_head() to deal with cloned skbs cx82310_eth: use skb_cow_head() to deal with cloned skbs smsc75xx: use skb_cow_head() to deal with cloned skbs ipv6: sr: fix double free of skb after handling invalid SRH MAINTAINERS: Add "B:" field for networking. net sched actions: allocate act cookie early qed: Fix issue in populating the PFC config paramters. qed: Fix possible system hang in the dcbnl-getdcbx() path. qed: Fix sending an invalid PFC error mask to MFW. qed: Fix possible error in populating max_tc field. ... -
David S. Miller authored
We are not supposed to add new entries to this thing any more. Thanks to Eric Dumazet for noticing this. Signed-off-by: -
Tushar Dave authored
Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by:Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
-
Arnd Bergmann authored
With CONFIG_I2C=m and NET_DSA_SMSC_LAN9303=y, we run into a link error: drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_read': regmap-i2c.c:(.text.regmap_smbus_byte_reg_read+0x18): undefined reference to `i2c_smbus_read_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_write': regmap-i2c.c:(.text.regmap_smbus_byte_reg_write+0x18): undefined reference to `i2c_smbus_write_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_reg_read': regmap-i2c.c:(.text.regmap_smbus_word_reg_read+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_read_swapped': regmap-i2c.c:(.text.regmap_smbus_word_read_swapped+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_write_swapped': This adds a Kconfig dependency to avoid the broken configuration. Fixes: be4e119f ("net: dsa: LAN9303: add I2C managed mode support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-nextDavid S. Miller authored
Samuel Ortiz says: ==================== NFC 4.12 pull request This is the NFC pull request for 4.12. We have: - Improvements for the pn533 command queue handling and device registration order. - Removal of platform data for the pn544 and st21nfca drivers. - Additional device tree options to support more trf7970a hardware options. - Support for Sony's RC-S380P through the port100 driver. - Removal of the obsolte nfcwilink driver. - Headers inclusion cleanups (miscdevice.h, unaligned.h) for many drivers. ==================== Signed-off-by: -
Mahesh Bandewar authored
Earlier patch 4493b81b ("bonding: initialize work-queues during creation of bond") moved the work-queue initialization from bond_open() to bond_create(). However this caused the link those are created using netlink 'create bond option' (ip link add bondX type bond); create the new trunk without initializing work-queues. Prior to the above mentioned change, ndo_open was in both paths and things worked correctly. The consequence is visible in the report shared by Joe Stringer - I've noticed that this patch breaks bonding within namespaces if you're not careful to perform device cleanup correctly. Here's my repro script, you can run on any net-next with this patch and you'll start seeing some weird behaviour: ip netns add foo ip li add veth0 type veth peer name veth0+ netns foo ip li add veth1 type veth peer name veth1+ netns foo ip netns exec foo ip li add bond0 type bond ip netns exec foo ip li set dev veth0+ master bond0 ip netns exec foo ip li set dev veth1+ master bond0 ip netns exec foo ip addr add dev bond0 192.168.0.1/24 ip netns exec foo ip li set dev bond0 up ip li del dev veth0 ip li del dev veth1 The second to last command segfaults, last command hangs. rtnl is now permanently locked. It's not a problem if you take bond0 down before deleting veths, or delete bond0 before deleting veths. If you delete either end of the veth pair as per above, either inside or outside the namespace, it hits this problem. Here's some kernel logs: [ 1221.801610] bond0: Enslaving veth0+ as an active interface with an up link [ 1224.449581] bond0: Enslaving veth1+ as an active interface with an up link [ 1281.193863] bond0: Releasing backup interface veth0+ [ 1281.193866] bond0: the permanent HWaddr of veth0+ - 16:bf:fb:e0:b8:43 - is still in use by bond0 - set the HWaddr of veth0+ to a different address to avoid conflicts [ 1281.193867] ------------[ cut here ]------------ [ 1281.193873] WARNING: CPU: 0 PID: 2024 at kernel/workqueue.c:1511 __queue_delayed_work+0x13f/0x150 [ 1281.193873] Modules linked in: bonding veth openvswitch nf_nat_ipv6 nf_nat_ipv4 nf_nat autofs4 nfsd auth_rpcgss nfs_acl binfmt_misc nfs lockd grace sunrpc fscache ppdev vmw_balloon coretemp psmouse serio_raw vmwgfx ttm drm_kms_helper vmw_vmci netconsole parport_pc configfs drm i2c_piix4 fb_sys_fops syscopyarea sysfillrect sysimgblt shpchp mac_hid nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack libcrc32c lp parport hid_generic usbhid hid mptspi mptscsih e1000 mptbase ahci libahci [ 1281.193905] CPU: 0 PID: 2024 Comm: ip Tainted: G W 4.10.0-bisect-bond-v0.14 #37 [ 1281.193906] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014 [ 1281.193906] Call Trace: [ 1281.193912] dump_stack+0x63/0x89 [ 1281.193915] __warn+0xd1/0xf0 [ 1281.193917] warn_slowpath_null+0x1d/0x20 [ 1281.193918] __queue_delayed_work+0x13f/0x150 [ 1281.193920] queue_delayed_work_on+0x27/0x40 [ 1281.193929] bond_change_active_slave+0x25b/0x670 [bonding] [ 1281.193932] ? synchronize_rcu_expedited+0x27/0x30 [ 1281.193935] __bond_release_one+0x489/0x510 [bonding] [ 1281.193939] ? addrconf_notify+0x1b7/0xab0 [ 1281.193942] bond_netdev_event+0x2c5/0x2e0 [bonding] [ 1281.193944] ? netconsole_netdev_event+0x124/0x190 [netconsole] [ 1281.193947] notifier_call_chain+0x49/0x70 [ 1281.193948] raw_notifier_call_chain+0x16/0x20 [ 1281.193950] call_netdevice_notifiers_info+0x35/0x60 [ 1281.193951] rollback_registered_many+0x23b/0x3e0 [ 1281.193953] unregister_netdevice_many+0x24/0xd0 [ 1281.193955] rtnl_delete_link+0x3c/0x50 [ 1281.193956] rtnl_dellink+0x8d/0x1b0 [ 1281.193960] rtnetlink_rcv_msg+0x95/0x220 [ 1281.193962] ? __kmalloc_node_track_caller+0x35/0x280 [ 1281.193964] ? __netlink_lookup+0xf1/0x110 [ 1281.193966] ? rtnl_newlink+0x830/0x830 [ 1281.193967] netlink_rcv_skb+0xa7/0xc0 [ 1281.193969] rtnetlink_rcv+0x28/0x30 [ 1281.193970] netlink_unicast+0x15b/0x210 [ 1281.193971] netlink_sendmsg+0x319/0x390 [ 1281.193974] sock_sendmsg+0x38/0x50 [ 1281.193975] ___sys_sendmsg+0x25c/0x270 [ 1281.193978] ? mem_cgroup_commit_charge+0x76/0xf0 [ 1281.193981] ? page_add_new_anon_rmap+0x89/0xc0 [ 1281.193984] ? lru_cache_add_active_or_unevictable+0x35/0xb0 [ 1281.193985] ? __handle_mm_fault+0x4e9/0x1170 [ 1281.193987] __sys_sendmsg+0x45/0x80 [ 1281.193989] SyS_sendmsg+0x12/0x20 [ 1281.193991] do_syscall_64+0x6e/0x180 [ 1281.193993] entry_SYSCALL64_slow_path+0x25/0x25 [ 1281.193995] RIP: 0033:0x7f6ec122f5a0 [ 1281.193995] RSP: 002b:00007ffe69e89c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1281.193997] RAX: ffffffffffffffda RBX: 00007ffe69e8dd60 RCX: 00007f6ec122f5a0 [ 1281.193997] RDX: 0000000000000000 RSI: 00007ffe69e89c90 RDI: 0000000000000003 [ 1281.193998] RBP: 00007ffe69e89c90 R08: 0000000000000000 R09: 0000000000000003 [ 1281.193999] R10: 00007ffe69e89a10 R11: 0000000000000246 R12: 0000000058f14b9f [ 1281.193999] R13: 0000000000000000 R14: 00000000006473a0 R15: 00007ffe69e8e450 [ 1281.194001] ---[ end trace 713a77486cbfbfa3 ]--- Fixes: 4493b81b ("bonding: initialize work-queues during creation of bond") Reported-by:
Joe Stringer <joe@ovn.org> Tested-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Daniel Borkmann authored
Add various related files that have been missing under BPF entry covering essential parts of its infrastructure and also add myself as co-maintainer. Signed-off-by:
-
Alexander Kochetkov authored
Currently driver use phy_start_aneg() in arc_emac_open() to bring up PHY. But phy_start() function is more appropriate for this purposes. Besides that it call phy_start_aneg() as part of PHY startup sequence it also can correctly bring up PHY from error and suspended states. So the patch replace phy_start_aneg() to phy_start(). Also the patch add call to phy_stop() to arc_emac_stop() to allow the PHY device to be fully suspended when the interface is unused. Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
If skb_pad() fails then it frees the skb so we should check for errors. Fixes: bdabad3e ("net: Add Qualcomm IPC router") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Miller authored
Maps of per-cpu type have their value element size adjusted to 8 if it is specified smaller during various map operations. This makes test_maps as a 32-bit binary fail, in fact the kernel writes past the end of the value's array on the user's stack. To be quite honest, I think the kernel should reject creation of a per-cpu map that doesn't have a value size of at least 8 if that's what the kernel is going to silently adjust to later. If the user passed something smaller, it is a sizeof() calcualtion based upon the type they will actually use (just like in this testcase code) in later calls to the map operations. Fixes: df570f57 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-04-20 This adds the basic infrastructure for IPsec hardware offloading, it creates a configuration API and adjusts the packet path. 1) Add the needed netdev features to configure IPsec offloads. 2) Add the IPsec hardware offloading API. 3) Prepare the ESP packet path for hardware offloading. 4) Add gso handlers for esp4 and esp6, this implements the software fallback for GSO packets. 5) Add xfrm replay handler functions for offloading. 6) Change ESP to use a synchronous crypto algorithm on offloading, we don't have the option for asynchronous returns when we handle IPsec at layer2. 7) Add a xfrm validate function to validate_xmit_skb. This implements the software fallback for non GSO packets. 8) Set the inner_network and inner_transport members of the SKB, as well as encapsulation, to reflect the actual positions of these headers, and removes them only once encryption is done on the payload. From Ilan Tayari. 9) Prepare the ESP GRO codepath for hardware offloading. 10) Fix incorrect null pointer check in esp6. From Colin Ian King. 11) Fix for the GSO software fallback path to detect the fallback correctly. From Ilan Tayari. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Steffen Klassert authored
This adds two new files to IPsec maintenance scope: net/ipv4/esp4_offload.c net/ipv6/ip6_offload.c Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-04-19 This series contains updates to i40e and i40evf only, most notable being the addition of trace points for BPF programs. Tobias Klauser updates i40evf to use net_device stats struct instead of a local private copy. Preethi updates the VF driver to not enable receive checksum offload by default for tunneled packets. Alex fixes an issue he introduced when he converted the code over to using the length field to determine if a descriptor was done or not. Mitch adds the ability to dump additional information on the VFs, which is not available through 'ip link show' using debugfs. Scott adds trace points to the drivers so that BPF programs can be attached for feature testing and verification. Jingjing adds admin queue functions for Pipeline Personalization Profile commands. Jake does most of the heavy lifting in this series, starting with the a reduction in the scope of the RTNL lock being held while resetting VFs to allow multiple PFs to reset in a timely manner. Factored out the direct queue modification so that we are able to re-use the code. Reduced the wait time for admin queue commands to complete, since we were waiting a minimum of a millisecond, when in practice the admin queue command is processed often much faster. Cleaned up code (flag) we never use. Make the code to resetting all the VFs optimized for parallel computing instead of the current way is a serialized fashion, to help reduce the time it takes. ==================== Signed-off-by: -
stephen hemminger authored
The NAPI data structure is embedded in the netvsc_device structure and is freed when device is closed. There is still a reference (in NAPI list) to this which causes a crash in netif_napi_del when device is removed. Fix by managing NAPI instances correctly. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: clean up tc filter destroy and delete logic The first patch fixes a potenial race condition, the second one is pure cleanup. ==================== Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
There is no need to NULL tp->root in ->destroy(), since tp is going to be freed very soon, and existing readers are still safe to read them. For cls_route, we always init its tp->root, so it can't be NULL, we can drop more useless code. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
WANG Cong authored
We could have a race condition where in ->classify() path we dereference tp->root and meanwhile a parallel ->destroy() makes it a NULL. Daniel cured this bug in commit d9363774 ("net, sched: respect rcu grace period on cls destruction"). This happens when ->destroy() is called for deleting a filter to check if we are the last one in tp, this tp is still linked and visible at that time. The root cause of this problem is the semantic of ->destroy(), it does two things (for non-force case): 1) check if tp is empty 2) if tp is empty we could really destroy it and its caller, if cares, needs to check its return value to see if it is really destroyed. Therefore we can't unlink tp unless we know it is empty. As suggested by Daniel, we could actually move the test logic to ->delete() so that we can safely unlink tp after ->delete() tells us the last one is just deleted and before ->destroy(). Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone") Cc: Roi Dayan <roid@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David Ahern authored
Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Reported-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Tested-by:
-
