The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to
be built, which handles various National Instruments ISA-PNP data
acquisition cards.  The configuration option currently depends on
ISAPNP.

The "ni_atmio" module is a "legacy" comedi driver with no
auto-configuration support and it doesn't register as a PNP card driver.
The only difference in initialization from the other comedi ISA card
drivers is that it will use the ISA-PNP functions to find, attach and
activate the card if no I/O base address has been specified by the user
in the COMEDI_DEVCONFIG ioctl.

The module compiles fine without the ISAPNP configuration option as the
<linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline
functions if the ISAPNP and PNP options, respectively, are not enabled.

Remove the dependancy on the ISAPNP option since the module builds
without it and can be used without it.

(There is a very slim chance that comedi will support proper ISA PNP
drivers one day, in which case the ni_atmio driver could be converted to
use this support and not support manual configuration.  However, not all
the PnP IDs of boards supported by this driver are currently known to
us.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d"
module to be built, which handles the National Instruments AT-MIO-16 and
AT-MIO-16D cards.  The configuration option currently depends on ISAPNP,
but the module doesn't use any ISAPNP functions and the cards are legacy
ISA cards with base I/O port, IRQ and DMA channel configured by jumpers.
(The driver doesn't use DMA though.)

Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help
text - the card names are missing a dash and they're not ISA-PNP.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolves warnings from the "sparse" checker of the form "warning: cast to
restricted __le??".
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As reported, this driver causes problems when built into the kernel, so
force it to be a module until those issues are fixed.

Also delete the "default n" lines in the Kconfig, as they are not
needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the driver for Xillybus, which is a general-purpose interface for
data communication with FPGAs (programmable logic). Please refer to the
README included in this patch for a detailed explanation.

It was previously submitted for misc-devices, but it appears like noone's
willing to review the code (which I can understand, given its magnitude).
Hence submitted as a staging driver.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes coding style issues reported by Dan here:-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2012-June/027767.htmlReported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DBG_PORT80 is always defined as empty macro
because VIAWET_DEBUG is never defined. Remove
it and VIAWET_DEBUG.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASSERT is always defined as empty macro
because VIAWET_DEBUG is never defined.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Greg spotted that said driver is not subscribing to the automagic
mechanism of auto-loading if a user tries to open /dev/zram.

This fixes it.

CC: Minchan Kim <minchan@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The resolution of msleep is related to HZ, so with HZ set to
100 any msleep of less then 10ms will become ~10ms. This is
not what we want. Use usleep_range to get more control of
what is happening here.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There was some code that cleared the dma_mask when dma was disabled in
the driver. Given that clearing the mask doesn't actually tell the usb
core we're not using dma, and a previous commit explicitely sets the
hcd->self.uses_dma value, it seems these values are unneeded and can
only potentially cause problems (when reloading a module, for example).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This thing seems to do some kind of delayed setup. Really, real kms
drivers shouldn't do that at all. Either stuff needs to be dynamically
hotplugged or the driver setup sequence needs to be fixed.

This patch here just moves the setup at the very end of the driver
load callback, with the locking adjusted accordingly.

v2: Also move the corresponding put from ->lastclose to ->unload.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add MODULE_ALIAS, so that auto module loading can work.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of jumping to goto labels, just return the error code directly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As devm_ioremap_resource() is used on probe, there is no need to explicitly
check the return value from platform_get_resource(), as this is something that
devm_ioremap_resource() takes care by itself.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LVDS Display Bridge is currently supported, so remove it from the missing
features list.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following sparse warnings:

drivers/staging/imx-drm/imx-tve.c:133:13: warning: context imbalance in 'tve_lock' - wrong count at exit
drivers/staging/imx-drm/imx-tve.c:139:13: warning: context imbalance in 'tve_unlock' - unexpected unlock
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IPUv3 has a total of 3 flows (one synchronous flow and 2 asynchronous flows).

Let's add a definition for such number in order to let the code easier to
understand.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to have braces for a single line 'if' block
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_kzalloc() may fail, so let's check its return value.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we
get the following build error:

ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined!

Export the required function to avoid this problem.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64 allmodconfig:

drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_auto_attach':
drivers/staging/comedi/drivers/addi_apci_2032.c:328:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/addi_apci_2032.c:328:11: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_detach':
drivers/staging/comedi/drivers/addi_apci_2032.c:350:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_attach_common':
drivers/staging/comedi/drivers/amplc_pci224.c:1289:2: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/amplc_pci224.c:1289:23: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1296:24: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1303:25: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1348:42: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_detach':
drivers/staging/comedi/drivers/amplc_pci224.c:1474:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Introduced by commit 0bdab509 ("staging:
comedi: use comedi_alloc_devpriv()"), which removed some inclusions of
<linux/slab.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the multi-line comments at the beginning of the file and
remove any irrelevant information.

Fix the II20K_ID_PCI200341M_1 define, there are one to many 0's.

Rename all the remaining pci20xxx_* to ii20k_*. The "pci" just adds
confusion, this is not a PCI board.

Remove the private (*detach) function. It's safe to call the comedi
core provided comedi_legacy_detach() even if there is nothing to
cleanup.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PCI-200341M-1 module can both provide an analog input subdevice
in this driver. The module provides four differential input channels
with four programmable gains.

Currently the gain is configured as an option passed when the board
is attached. Rewrite the ai subdevice support functions to properly
handle the programmable gain.

For aesthetics, redefine the memory map for the module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PCI-20006M-1 and PCI-20006M-2 modules can both provide an
analog output subdevice in this driver. Fix the module init code
to detect both of them.

The analog output can support +/-5, 0-10, or +/-10 volt ranges
depending on jumpers on the board. Report all the ranges to the
user instead of relying on the configuration options to set the
range. The user can then select the appropriate range depending
on how they have configured the hardware.

Tidy up the (*insn_{read,write})() functions to work like the
comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The union used for the subdevice private data just adds confusion.
Split the union into two separate private data structs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'iobase' can be calculated when needed. Remove it from the
subdevice private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the carrier board id to determine if a module is installed for
a given subdevice.

Consolidate the module init code into ii20k_init_module().

For aesthetic reasons, rename the subdevice functions to remove
'pci' from them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For asethetics, redefine the register map for the carrier board.
The 'PCI*' names lead one to think this is a PCI board not a
legacy ISA board.

Remove the #if 0'd out pci20xxx_{do,di}() functions. They are not
needed.

Rename, and fix, the pci20xxx_dio_config() function. The control
and direction registers are not readable. Use the new register map
defines instead of the crazy bit shifts.

Rename, and fix, the pci20xxx_dio_insn_config() function. This
function should treat data[0] as the 'instruction' to handle not
just use it to determine if the port is an input or output.

Rename, and tix, the pci20xxx_dio_insn_bits() function. The 'state'
only needs to be updated if the 'mask' indicates.

For aesthetics, abosrb the pci20xxx_dio_init() into the (*attach)
function.

Fix the carrier board id detect in the (*attach). There are two carrier
board types, one with 32 dio channels and one without. Use this info
when setting up the dio subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is not used, and it looks to much like the comedi CR_CHAN
macro. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move the static const data to the head of
the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move a couple functions to remove the need for the last forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the pci20xxx_dio_*() functions to remove the need for some of
the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the pci20xxx_attach() and pci20xxx_detach() functions to remove
the need for some of the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, use the helper function to allocate the
subdevice private data instead of hanging it on the device
private data. The core will free the memory during the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the addi_apci_1710 driver has been removed, get rid of all the
unnecessary stuff in addi_common.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is seriously broken and most of it does not "work" with
the comedi API. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the necessary bits from addi_common.h to remove it's dependency
and make this driver standalone.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>