- 24 Jul, 2020 18 commits
-
-
Jim Cromie authored
Export ddebug_exec_queries() for use by modules. This will allow module authors to control all their *pr_debug*s dynamically. And since ddebug_exec_queries() is what implements "echo $query >control", it gives the same per-callsite control. Virtues of this: - simplicity. just an export. - full control over any/all subsets of callsites. - same "query/command-string" in code and console - full callsite selectivity with module file line format Format in particular deserves special attention; it is where low-hanging fruit will be found. Consider: drivers/gpu/drm/amd/display/include/logger_types.h: #define DC_LOG_SURFACE(...) pr_debug("[SURFACE]:"__VA_ARGS__) #define DC_LOG_HW_LINK_TRAINING(...) pr_debug("[HW_LINK_TRAINING]:"__VA_ARGS__) .. 9 more .. Thats 11 string prefixes, used in 804 places in drivers/gpu/** Clearly this is a systematized classification of those callsites. And one I'd expect to see repeated often. Using ddebug_exec_queries(), authors can select on those prefixes as a unitary set, equivalent to: echo "module=MODULE_NAME format=^[SURFACE]: +p" >control Trivially, those sets can be subsected with the other query terms too, say file=foo, should the author see fit. Perhaps as important, users can modify the set of enabled callsites, presumably to aid debugging by enabling helpful debug callsites, and disabling those that just clutter the info. Authors could even alter [fmlt] flags, though I dont see a good reason why they would. Perhaps harnessed by bug-logging automation to get fuller, or more minimal bug-reports. DRM drm has both drm.debug, which defines 32 categories of drm_printk logging, and entirely separate uses of pr_debug, which are dynamic on this i915 laptop, running mainline. So I can observe and report on both. The i915 driver has 118 dyndbg callsites, with following "classifications" defined in drivers/gpu/drm/i915/gvt/** $ grep 915 /proc/dynamic_debug/control | cut -d= -f2 | cut -d: -f1,2 | sort -u _ "gvt: cmd _ "gvt: core _ "gvt: dpy _ "gvt: el _ "gvt: irq _ "gvt: mm _ "gvt: mmio _ "gvt: render _ "gvt: sched _ "%s for root hub!\012" _ "Vendor defined info completion code %u\012" This classification is entirely out-of-band for control by drm.debug, and is only available to root user at the console. But module authors can activate them with ddebug_exec_queries(sprintf("format=^%s +p")), and then decide how to expose the groups to the user for max utility. drm.debug drm.debug has 32 bit-flags, and matching enum drm_debug_category values to classify the ~2943 DRM_DEBUG*() callsites in drivers/gpu The drm.debug callback could invoke ddebug_exec_queries() with 32 different hardcoded query strings, needing only (bit) ? " +p" : " -p" added. I briefly enabled drm.debug=0xff on my i915 laptop, which yielded these unique prefixes: (dmesg | cut -c17- | cut -d\] -f1 | sort -u) [drm:drm_atomic_check_only [drm [drm:drm_atomic_get_crtc_state [drm [drm:drm_atomic_get_plane_state [drm [drm:drm_atomic_nonblocking_commit [drm [drm:drm_atomic_set_fb_for_plane [drm [drm:drm_atomic_state_default_clear [drm [drm:__drm_atomic_state_free [drm [drm:drm_atomic_state_init [drm [drm:drm_crtc_vblank_helper_get_vblank_timestamp_internal [drm [drm:drm_handle_vblank [drm [drm:drm_ioctl [drm [drm:drm_mode_addfb2 [drm [drm:drm_mode_object_get [drm [drm:drm_mode_object_put.part.0 [drm [drm:drm_update_vblank_count [drm [drm:drm_vblank_enable [drm [drm:drm_vblank_restore [drm [drm:vblank_disable_fn [drm i915 0000:00:02.0: [drm:gen9_set_dc_state [i915 i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915 i915 0000:00:02.0: [drm:__intel_display_power_get_domain.part.0 [i915 i915 0000:00:02.0: [drm:__intel_display_power_put_domain [i915 i915 0000:00:02.0: [drm:intel_plane_atomic_calc_changes [i915 i915 0000:00:02.0: [drm:skl_enable_dc6 [i915 Several good format=^prefixes are apparent there, and some misses. ^[drm:drm_atomic_ # misses: [drm:__drm_atomic_state_free [drm ^[drm:drm_ioctl ^[drm:drm_mode ^[drm:drm_vblank_ # misses: [drm:drm_update_vblank_count & [drm:vblank_disable_fn Its not a perfect 1:1 single format-match per class, but the misses above can be covered with 1 & 2 additional queries, which can be concatenated together with ";" separators and submitted with 1 call. Benefits: For drm, adapting DRM_DEBUG to use dynamic-debug inside could replicate (and thereby obsolete) lots of bit-checking in current DRM_DEBUG callsites, at least with JUMP_LABEL optimized code. ddebug_exec_queries() and a handful of fixed query-strings can select and thereby control the already classified callsites. With the classes mapped to queries, the enum type and parameter can be eliminated (folded away with macro magic), at least for DYNAMIC_DEBUG & JUMP_LABEL builds. Is it safe ? ddebug_exec_queries() is currently exposed to user space in several limited ways; 1 it is called from module-load callback, where it implements the $modname.dyndbg=+p "fake" parameter provided to all modules. 2 it handles query input via >control directly IOW, it is "fully" exposed to local root user; exposing the same functionality to other kernel modules is no additional risk. The other standard issue to check is locking: dyndbg has a single mutex, taken by ddebug_change to handle >control, and by ddebug_proc_(start|stop) to span `cat control`. Queries submitted via export will typically have module specified, which dramatically cuts the scan by ddebug_change vs "module=* +p". ISTM this proposed export presents no locking problems. TLDR; It would be interesting to see how drm.dyndbg=$QUERY and drm.debug=$HEXY would interact; it might be order dependent, as if given as modprobe args or in /etc/modprobe.d/ Acked-by: <jbaron@akamai.com> Signed-off-by:Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-19-jim.cromie@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jim Cromie authored
For log-message output, reduce column space consumed by current pr_fmt by dropping __func__ and shortening "dynamic_debug" to "dyndbg". This improves readability on narrow consoles, and better matches other kernel boot info messages. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
This should work: echo module=amd* format=^[IF_TRACE]: +p >/proc/dynamic_debug/control consider drivers/gpu/drm/amd/display/include/logger_types.h: It has 11 defines like: #define DC_LOG_IF_TRACE(...) pr_debug("[IF_TRACE]:"__VA_ARGS__) These defines are used 804 times at recent count; they are a good use case to evaluate existing format-message based classifications of *pr_debug*. Those macros prefix the supplied format with a fixed string, I'd expect most existing message classification schemes to do something similar. Hence we want to be able to anchor our match to the beginning of the format string, allowing easy construction of clear and precise queries, leveraging the existing classification scheme to enable and disable those callsites. Note that unlike other search terms, formats are implicitly floating substring matches, without the need for explicit wildcards. This makes no attempt at wider regex features, just the one we need. TLDR: Using the anchor also means the []s are less helpful for disamiguating the prefix from a random in-message occurrence, allowing shorter prefixes. Acked-by: <jbaron@akamai.com> Signed-off-by: -
Jim Cromie authored
flags & mask are used together everywhere, and are passed around together between multiple functions; they belong together in a struct, call that struct flag_settings. Use struct flag_settings to rework 3 functions: - ddebug_exec_query - declares query and flag-settings, calls other 2, passing flags - ddebug_parse_flags - fills flag_settings and returns - ddebug_change - test all callsites against query, modify passing sites. benefits: - bit-banging always needs flags & mask, best together. - simpler function signatures - 1 less parameter, less stack overhead no functional changes Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
Current code expects "keyword" "arg" as 2 words, space separated. Change to also accept "keyword=arg" form as well, and drop !(nwords%2) requirement. Then in rest of function, use new keyword, arg variables instead of word[i], word[i+1] Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
Accept these additional query forms: echo "file $filestr +_" > control path/to/file.c:100 # as from control, column 1 path/to/file.c:1-100 # or any legal line-range path/to/file.c:func_A # as from an editor/browser path/to/file.c:drm_* # wildcards still work path/to/file.c:*_foo # lead wildcard too 1st 2 examples are treated as line-ranges, 3-5 are treated as func's Doc these changes, and sprinkle in a few extra wild-card examples and trailing # explanation texts. Acked-by: <jbaron@akamai.com> Signed-off-by: -
Jim Cromie authored
Make the code-block reusable to later handle "file foo.c:101-200" etc. This is a 99% code move, with reindent, function wrap&call, +pr_debug. no functional changes. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
reduce word count via gcc ?: extension, no actual code change. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
loadable modules are the last in on this list, and are the only modules that could be removed. ddebug_remove_module() searches from head, but ddebug_add_module() uses list_add_tail(). Change it to list_add() for a micro-optimization. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
ddebug_exec_query declares an auto var, and passes it to ddebug_parse_query, which memsets it before using it. Drop that memset, instead initialize the variable in the caller; let the compiler decide how to do it. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
this pr_err attempts to print the string after the OP, but the string has been parsed and chopped up, so looks empty. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead. Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
during dyndbg init, verbose logging prints its ram overhead. It counted strlens of struct _ddebug's 4 string members, in all callsite entries, which would be approximately correct if each had been mallocd. But they are pointers into shared .rodata; for example, all 10 kobject callsites have identical filename, module values. Its best not to count that memory at all, since we cannot know they were linked in because of CONFIG_DYNAMIC_DEBUG=y, and we want to report a number that reflects what ram is saved by deconfiguring it. Also fix wording and size under-reporting of the __dyndbg section. Heres my overhead, on a virtme-run VM on a fedora-31 laptop: dynamic_debug:dynamic_debug_init: 260 modules, 2479 entries \ and 10400 bytes in ddebug tables, 138824 bytes in __dyndbg section Acked-by: <jbaron@akamai.com> Signed-off-by: -
Jim Cromie authored
dyndbg populates its callsite info into __verbose section, change that to a more specific and descriptive name, __dyndbg. Also, per checkpatch: simplify __attribute(..) to __section(__dyndbg) declaration. and 1 spelling fix, decriptor Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
The verbose/debug logging done for `cat $MNT/dynamic_debug/control` is voluminous (2 per control file entry + 2 per PAGE). Moreover, it just prints pointer and sequence, which is not useful to a dyndbg user. So just drop them. Also require verbose>=2 for several other debug printks that are a bit too chatty for typical needs; ddebug_change() prints changes, once per modified callsite. Since queries like "+p" will enable ~2300 callsites in a typical laptop, a user probably doesn't need to see them often. ddebug_exec_queries() still summarizes with verbose=1. ddebug_(add|remove)_module() also print 1 line per action on a module, not needed by typical modprobe user. This leaves verbose=1 better focussed on the >control parsing process. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
commit 4bad78c5 ("lib/dynamic_debug.c: use seq_open_private() instead of seq_open()")' The commit was one of a tree-wide set which replaced open-coded boilerplate with a single tail-call. It therefore obsoleted the comment about that boilerplate, clean that up now. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
since cf964976484 in 2012, initialization is done with early_initcall, update the Docs, which still say arch_initcall. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
Jim Cromie authored
Regarding: commit 2b678319 ("dynamic_debug: add trim_prefix() to provide source-root relative paths") commit a73619a8 ("kbuild: use -fmacro-prefix-map to make __FILE__ a relative path") 2nd commit broke dynamic-debug's "file $fullpath" query form, but nobody noticed because 1st commit had trimmed prefixes from control-file output, so the click-copy-pasting of fullpaths into new queries had ceased; that query form became unused. Removing the function is cleanest, but it could be useful in old-compiler corner cases, where __FILE__ still has /full/path, and it safely does nothing otherwize. So instead, quietly deprecate "file /full/path" query form, by removing all /full/paths examples in the docs. I skipped adding a back-compat note. Acked-by: <jbaron@akamai.com> Signed-off-by:
-
- 23 Jul, 2020 22 commits
-
-
Tomas Winkler authored
Replace the single element arrays with a simple value type u8 reserved, even thought is is not used for dynamically sized trailing elements it confuses the effort of replacing one-element arrays with flexible arrays for that purpose. Link: https://github.com/KSPP/linux/issues/79 Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-7-tomas.winkler@intel.comSigned-off-by:
-
Tomas Winkler authored
Use sizeof(*dev) + sizeof(*hw) instead of sizeof(struct mei_device) + sizeof(struct mei_me_hw) There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Tomas Winkler authored
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Tomas Winkler authored
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Tomas Winkler authored
Use sizeof(connect_data))) instead of sizeof(struct mei_connect_client_data) when copying data between user space and kernel. There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Tomas Winkler authored
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Reviewed-by:
-
Greg Kroah-Hartman authored
This reverts commit 3c3b7dde, as it turns out Tomas made a better series of patches for this same issue. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Grigore Popescu authored
Because the DPNIs are probed before DPMCPs and other objects that need to be allocated, messages like "No more resources of type X left" are printed by the fsl-mc bus driver. This patch resolves the issue by probing the allocatable objects first and then any other object that may use them. Signed-off-by:
Grigore Popescu <grigore.popescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-4-ioana.ciornei@nxp.comSigned-off-by:
-
Laurentiu Tudor authored
Replace the spinlock that serializes the MC commands with a raw spinlock. This is needed for the RT kernel because there are MC commands sent in interrupt context. Signed-off-by:
-
Ioana Ciornei authored
The MC bus has different types of devices that can be discovered on the bus. Add the missing device types. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.comSigned-off-by:
-
Christophe JAILLET authored
Avoid a memset after a call to 'dma_alloc_coherent()'. This is useless since commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used because a spin_lock is hold in 'ilo_open()' before calling 'ilo_ccb_setup()' @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy for 5.9 - New PHY Drivers: - Samsung UFS - Qcom USB DWC for ipq806x - Xilinx ZynqMP Gigabit Transceiver - Qcom USB QMP for IPQ8074 - BCM63xx USBH - Removed: - Qcom ufs qmp phy driver - Updates: - Support for Qcom SM8250 QMP V4 USB3 UNIPHY - qcom-snps runtime pm support - Cleanup of W=1 warns in the subsystem * tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (46 commits) phy: qualcomm: fix setting of tx_deamp_3_5db when device property read fails phy: bcm63xx-usbh: Add BCM63xx USBH driver dt-bindings: phy: add bcm63xx-usbh bindings phy: armada-38x: fix NETA lockup when repeatedly switching speeds dt: update Marvell Armada 38x COMPHY binding phy: samsung-ufs: Fix IS_ERR argument dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support phy: renesas: rcar-gen3-usb2: exit if request_irq() failed phy: renesas: rcar-gen3-usb2: move irq registration to init devicetree: bindings: phy: Document ipq806x dwc3 qcom phy phy: qualcomm: add qcom ipq806x dwc usb phy driver phy: samsung-ufs: add UFS PHY driver for samsung SoC dt-bindings: phy: Document Samsung UFS PHY bindings phy: sun4i-usb: explicitly include gpio/consumer.h phy: stm32: use NULL instead of zero phy: exynos5-usbdrd: use correct format for structure description phy: rockchip-typec: use correct format for structure description phy: xgene: remove unsigned integer comparison with less than zero phy: mapphone-mdm6600: Add missing description for some structure fields ...
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.deSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Randy Dunlap authored
Drop the repeated word "the" in a comment. Cc: Arve Hjønnevåg <arve@android.com> Cc: Todd Kjos <tkjos@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: devel@driverdev.osuosl.org Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200719002738.20210-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Drop the repeated word "the" in a comment. Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element arrays with a simple value type u8 reserved, once this is just a placeholder for alignment. Also, while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://github.com/KSPP/linux/issues/79Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, make use of the array_size() helper instead of the open-coded version in memcpy(). These sorts of multiplication factors need to be wrapped in array_size(). And while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/79Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.9-rc1 Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge window. DFL: - Xu's changes add support for AFU interrupt handling and puts them to use for error handling. - Xu's other change also adds another device-id for the Intel FPGA PAC N3000. - John's change converts from using get_user_pages() to pin_user_pages(). - Gustavo's patch cleans up some of the allocation by using struct_size(). Xilinx: - Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers and updates the comments and dt-bindings to reflect the fact it also supports 7 series devices. Core: - Tom cleaned up the fpga-bridge / fpga-mgr core by removing some dead-stores. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by:
Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add device id for Intel FPGA PAC N3000 Documentation: fpga: dfl: add descriptions for interrupt related interfaces. fpga: dfl: afu: add AFU interrupt support fpga: dfl: fme: add interrupt support for global error reporting fpga: dfl: afu: add interrupt support for port error reporting fpga: dfl: introduce interrupt trigger setting API fpga: dfl: pci: add irq info for feature devices enumeration fpga: dfl: parse interrupt info for feature devices on enumeration fpga manager: xilinx-spi: check INIT_B pin during write_init dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO fpga: Fix dead store in fpga-bridge.c fpga: Fix dead store fpga-mgr.c fpga: dfl: Use struct_size() in kzalloc() fpga manager: xilinx-spi: remove unneeded, mistyped variables fpga manager: xilinx-spi: valid for the 7 Series too dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
-
