- 27 Jun, 2012 22 commits
-
-
Yuan Kang authored
create separate files for split key generation and scatterlist functions. Signed-off-by:
Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Yuan Kang authored
remove caam_jr_register and caam_jr_deregister to allow sharing of job rings. Signed-off-by:
-
Yuan Kang authored
functions for external storage of seq in/out lengths, i.e., for 32-bit lengths. These type-dependent functions automatically determine whether to store the length internally (embedded in the command header word) or externally (after the address pointer), based on size of the type given. Signed-off-by:
-
Hemant Agrawal authored
Add a PDB header file to support building protocol descriptors. Signed-off-by:
Steve Cornelius <sec@pobox.com> Signed-off-by:
Hemant Agrawal <hemant@freescale.com> Signed-off-by:
-
Kim Phillips authored
init_desc, by always ORing with 1 for the descriptor header inclusion into the descriptor length, and init_sh_desc_pdb, by always specifying the descriptor length modification for the PDB via options, would not allow for odd length PDBs to be embedded in the constructed descriptor length. Fix this by simply changing the OR to an addition. also round-up pdb_bytes to the next SEC command unit size, to allow for, e.g., optional packet header bytes that aren't a multiple of CAAM_CMD_SZ. Reported-by:
Radu-Andrei BULIE <radu.bulie@freescale.com> Signed-off-by:
-
Yashpal Dutta authored
In case of protocol acceleration descriptors, Shared descriptor header must carry size of header length + PDB length in words which will be skipped by DECO while processing descriptor to provide first command word offset Signed-off-by:
Yashpal Dutta <yashpal.dutta@freescale.com> Signed-off-by:
-
Kim Phillips authored
SEC4 h/w gets configured in 32- vs. 36-bit physical addressing modes depending on the size of dma_addr_t, which is not always equal to sizeof(u32 *). Also fixed alignment of a dma_unmap call whilst in there. Signed-off-by:
-
Kim Phillips authored
presumably leftovers from possible macro development. Signed-off-by:
-
Jussi Kivilinna authored
Move AES header to the new asm/crypto directory. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Jussi Kivilinna authored
Move serpent crypto headers to the new asm/crypto/ directory. Signed-off-by:
-
Jussi Kivilinna authored
Now that shared glue code is available, convert twofish-avx to use it. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Jussi Kivilinna authored
Now that shared glue code is available, convert twofish-x86_64-3way to use it. Signed-off-by:
-
Jussi Kivilinna authored
Now that shared glue code is available, convert camellia-x86_64 to use it. Signed-off-by:
-
Jussi Kivilinna authored
Now that shared glue code is available, convert serpent-avx to use it. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Jussi Kivilinna authored
Now that serpent-sse2 glue code has been made generic, it can be split to separate module. Signed-off-by:
-
Jussi Kivilinna authored
crypto: serpent-sse2 - prepare serpent-sse2 glue code into generic x86 glue code for 128bit block ciphers Block cipher implementations in arch/x86/crypto/ contain common glue code that is currently duplicated in each module (camellia-x86_64, twofish-x86_64-3way, twofish-avx, serpent-sse2 and serpent-avx). This patch prepares serpent-sse2 glue into generic glue code for all 128bit block ciphers to use in arch/x86/crypto. Signed-off-by:
-
Jussi Kivilinna authored
Remove duplicate ablk_* functions and make use of ablk_helper module instead. Signed-off-by:
-
Jussi Kivilinna authored
Remove duplicate ablk_* functions and make use of ablk_helper module instead. Signed-off-by:
-
Jussi Kivilinna authored
Move ablk-* functions to separate module to share common code between cipher implementations. Signed-off-by:
-
Seth Jennings authored
Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
-
Seth Jennings authored
When the nx driver was pulled, the Makefile that actually builds it is arch/powerpc/Makefile. This is unnatural. This patch moves the line that builds the nx driver from arch/powerpc/Makefile to drivers/crypto/Makefile where it belongs. Signed-off-by:
-
Benoît Thébaudeau authored
Commit 45001e92, which added support for RNGA, ignored the previous commit 984e976f, which changed the data_present API. Cc: Matt Mackall <mpm@selenic.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by:
-
- 22 Jun, 2012 1 commit
-
-
Herbert Xu authored
It has been observed that sometimes the crypto allocation code will get stuck for 60 seconds or multiples thereof. This is usually caused by an algorithm failing to pass the self-test. If an algorithm fails to be constructed, we will immediately notify all larval waiters. However, if it succeeds in construction, but then fails the self-test, we won't notify anyone at all. This patch fixes this by merging the notification in the case where the algorithm fails to be constructed with that of the the case where it pases the self-test. This way regardless of what happens, we'll give the larval waiters an answer. Signed-off-by:
-
- 14 Jun, 2012 5 commits
-
-
Jussi Kivilinna authored
Rename serpent-avx assembler functions so that they do not collide with serpent-sse2 assembler functions when linking both versions in to same kernel image. Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Jussi Kivilinna authored
This patch changes u8 in struct arc4_ctx and variables to u32 (as AMD seems to have problem with u8 array). Below are tcrypt results of old 1-byte block cipher versus ecb(arc4) with u8 and ecb(arc4) with u32. tcrypt results, x86-64 (speed ratios: new-u32/old, new-u8/old): u32 u8 AMD Phenom II : x3.6 x2.7 Intel Core 2 : x2.0 x1.9 tcrypt results, i386 (speed ratios: new-u32/old, new-u8/old): u32 u8 Intel Atom N260 : x1.5 x1.4 Cc: Jon Oberheide <jon@oberheide.org> Signed-off-by: -
Jussi Kivilinna authored
Currently arc4.c provides simple one-byte blocksize cipher which is wrapped by ecb() module, giving function call overhead on every encrypted byte. This patch adds ecb(arc4) directly into arc4.c for higher performance. tcrypt results (speed ratios: new/old): AMD Phenom II, x86-64 : x2.7 Intel Core 2, x86-64 : x1.9 Intel Atom N260, i386 : x1.4 Cc: Jon Oberheide <jon@oberheide.org> Signed-off-by:
-
Jussi Kivilinna authored
Signed-off-by:
-
Paul Bolle authored
Commit 98971f84 ("crypto: s390 - cleanup DES code") should have also removed crypto_des.h. That file is unused and unneeded since that commit. So let's clean up that file too. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
- 12 Jun, 2012 9 commits
-
-
Johannes Goetzfried authored
This patch adds a x86_64/avx assembler implementation of the Serpent block cipher. The implementation is very similar to the sse2 implementation and processes eight blocks in parallel. Because of the new non-destructive three operand syntax all move-instructions can be removed and therefore a little performance increase is provided. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) serpent-avx-x86_64 vs. serpent-sse2-x86_64 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.03x 1.01x 1.01x 1.01x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 0.99x 1.00x 1.01x 1.00x 1.00x 256B 1.05x 1.03x 1.00x 1.02x 1.05x 1.06x 1.05x 1.02x 1.05x 1.02x 1024B 1.05x 1.02x 1.00x 1.02x 1.05x 1.06x 1.05x 1.03x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.03x 1.04x 1.02x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 1.01x 1.00x 1.01x 1.01x 1.00x 1.00x 0.99x 1.03x 1.01x 1.01x 64B 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.00x 1.01x 1.00x 1.02x 256B 1.05x 1.02x 1.00x 1.02x 1.05x 1.02x 1.04x 1.05x 1.05x 1.02x 1024B 1.06x 1.02x 1.00x 1.02x 1.07x 1.06x 1.05x 1.04x 1.05x 1.02x 8192B 1.05x 1.02x 1.00x 1.02x 1.06x 1.06x 1.04x 1.05x 1.05x 1.02x serpent-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.26x 1.73x ecb-dec 1.20x 1.64x cbc-enc 0.33x 0.45x cbc-dec 1.24x 1.67x ctr-enc 1.32x 1.76x ctr-dec 1.32x 1.76x lrw-enc 1.20x 1.60x lrw-dec 1.15x 1.54x xts-enc 1.22x 1.64x xts-dec 1.17x 1.57x Signed-off-by:Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Johannes Goetzfried authored
The AVX implementation of the twofish cipher processes 8 blocks parallel, so we need to make test vectors larger to check parallel code paths. Test vectors are also large enough to deal with 16 block parallel implementations which may occur in the future. Signed-off-by:
-
Johannes Goetzfried authored
This patch adds a x86_64/avx assembler implementation of the Twofish block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the 3way-parallel functions from the twofish-x86_64-3way module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) twofish-avx-x86_64 vs. twofish-x86_64-3way 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.97x 1.00x 0.95x 0.97x 0.97x 0.96x 0.95x 0.95x 0.98x 64B 0.99x 0.99x 1.00x 0.99x 0.98x 0.98x 0.99x 0.98x 0.99x 0.98x 256B 1.20x 1.21x 1.00x 1.19x 1.15x 1.14x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.24x 1.26x 1.28x 1.26x 1.27x 8192B 1.31x 1.32x 1.00x 1.31x 1.25x 1.25x 1.28x 1.29x 1.28x 1.30x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.96x 0.96x 1.00x 0.96x 0.97x 0.98x 0.95x 0.95x 0.95x 0.96x 64B 1.00x 0.99x 1.00x 0.98x 0.98x 1.01x 0.98x 0.98x 0.98x 0.98x 256B 1.20x 1.21x 1.00x 1.21x 1.15x 1.15x 1.19x 1.20x 1.18x 1.19x 1024B 1.29x 1.30x 1.00x 1.28x 1.23x 1.23x 1.26x 1.27x 1.26x 1.27x 8192B 1.31x 1.33x 1.00x 1.31x 1.26x 1.26x 1.29x 1.29x 1.28x 1.30x twofish-avx-x86_64 vs aes-asm (8kB block): 128bit 256bit ecb-enc 1.19x 1.63x ecb-dec 1.18x 1.62x cbc-enc 0.75x 1.03x cbc-dec 1.23x 1.67x ctr-enc 1.24x 1.65x ctr-dec 1.24x 1.65x lrw-enc 1.15x 1.53x lrw-dec 1.14x 1.52x xts-enc 1.16x 1.56x xts-dec 1.16x 1.56x Signed-off-by: -
Phil Sutter authored
Since mv_hash_final_fallback() uses ctx->state, read out the digest state register before calling it. Signed-off-by:
Phil Sutter <phil.sutter@viprinet.com> Signed-off-by:
-
Phil Sutter authored
Signed-off-by:
-
Phil Sutter authored
The timer triggers when 500ms have gone by after triggering the engine and no completion interrupt was received. The callback then tries to sanitise things as well as possible. Signed-off-by:
-
Sonic Zhang authored
The CRC peripheral is a hardware block used to compute the CRC of the block of data. This is based on a CRC32 engine which computes the CRC value of 32b data words presented to it. For data words of < 32b in size, this driver pack 0 automatically into 32b data units. This driver implements the async hash crypto framework API. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Mathias Krause authored
Commit ea4d26ae ("raid5: add AVX optimized RAID5 checksumming") introduced x86/ arch wide defines for AFLAGS and CFLAGS indicating AVX support in binutils based on the same test we have in x86/crypto/ right now. To minimize duplication drop our implementation in favour to the one in x86/. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
- 11 Jun, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes an unaligned fault on x86-32 with aesni-intel and an RNG failure with atmel-rng (repeated bits)." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni-intel - fix unaligned cbc decrypt for x86-32 hwrng: atmel-rng - fix race condition leading to repeated bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "Nothing too exciting - a cleanup for debugfs in error handling and a fix for the padding (which has only just acquired real use) and exporting a function that's supposed to be usable by drivers." * tag 'regmap-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Export regmap_reinit_cache() regmap: Fix the size calculation for map->format.buf_size regmap: clean up debugfs if regmap_init fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "A couple of small fixes, plus larger fixes for the gpio-regulator driver the most recent changes for which had apparently not been tested at all in -next (or elsewhere from the looks of it)." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Properly handle the case min_uV < rdev->desc->min_uV in map_voltage_linear regulator: max8649: fix missing regmap in rdev regulator: gpio-regulator: populate selector from set_voltage regulator: gpio-regulator: Fix finding of smallest value regulator: gpio-regulator: do not pass drvdata pointer as reference regulator: anatop: Use correct __devexit_p annotation regulator: palmas: Fix wrong kfree calls
-
