- 28 Oct, 2017 17 commits
-
-
Jordan Crouse authored
Add a shadow pointer to track the current command being written into the ring. Don't commit it as 'cur' until the command is submitted. Because 'cur' is used to construct the software copy of the wptr this ensures that somebody peeking in on the ring doesn't assume that a command is inflight while it is being written. This isn't a huge deal with a single ring (though technically the hangcheck could assume the system is prematurely busy when it isn't) but it will be rather important for preemption where the decision to preempt is based on a non-empty ringbuffer. Without a shadow an aggressive preemption scheme could assume that the ringbuffer is non empty and switch to it before the CPU is done writing the command and boom. Even though preemption won't be supported for all targets because of the way the code is organized it is simpler to make this generic for all targets. The extra load for non-preemption targets should be minimal. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
In order to manage ringbuffer priority to its fullest userspace should know how many ringbuffers it has to work with. Add a parameter to return the number of active rings. Signed-off-by:
-
Jordan Crouse authored
Add the infrastructure to support the idea of multiple ringbuffers. Assign each ringbuffer an id and use that as an index for the various ring specific operations. The biggest delta is to support legacy fences. Each fence gets its own sequence number but the legacy functions expect to use a unique integer. To handle this we return a unique identifier for each submission but map it to a specific ring/sequence under the covers. Newer users use a dma_fence pointer anyway so they don't care about the actual sequence ID or ring. The actual mechanics for multiple ringbuffers are very target specific so this code just allows for the possibility but still only defines one ringbuffer for each target family. Signed-off-by:
-
Jordan Crouse authored
When we move to multiple ringbuffers we're going to store the data in the memptrs on a per-ring basis. In order to prepare for that move the current memptrs from the adreno namespace into msm_gpu. This is way cleaner and immediately lets us kill off some sub functions so there is much less cost later when we do move to per-ring structs. Signed-off-by:
-
Jordan Crouse authored
Currently the behavior of a command stream is provided by the user application during submission and the application is expected to internally maintain the settings for each 'context' or 'rendering queue' and specify the correct ones. This works okay for simple cases but as applications become more complex we will want to set context specific flags and do various permission checks to allow certain contexts to enable additional privileges. Add kernel-side submit queues to be analogous to 'contexts' or 'rendering queues' on the application side. Each file descriptor instance will maintain its own list of queues. Queues cannot be shared between file descriptors. For backwards compatibility context id '0' is defined as a default context specifying no priority and no special flags. This is intended to be the usual configuration for 99% of applications so that a garden variety application can function correctly without creating a queue. Only those applications requiring the specific benefit of different queues need create one. Signed-off-by:
-
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Rob Clark authored
Now that drm/msm is converted over to use msm_get_clk() everywhere (that matters), which handles falling back to looking for a clock with the "_clk" suffix, we can remove "_clk" from the documentation so that new dts files added do not include "_clk" in the name. Previously we were doing this for the more recently upstreamed bindings but not for (nearly) all. Signed-off-by:
Rob Herring <robh@kernel.org>
-
Rob Clark authored
We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in HDMI code so we can drop the "_clk" suffix in bindings while maintaing backwards compatibility. Signed-off-by:
Sean Paul <seanpaul@chromium.org>
-
Rob Clark authored
We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in eDP code so we can drop the "_clk" suffix in bindings while maintaing backwards compatibility. Signed-off-by:
-
Rob Clark authored
We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in DSI code so we can drop the "_clk" suffix in bindings while maintaing backwards compatibility. Signed-off-by:
-
Rob Clark authored
This is useful to see in the log, without requiring drm.debug. Signed-off-by: -
Rob Clark authored
When firmware was added to linux-firmware, it was put in a qcom sub- directory, unlike what we'd been using before. For a300_pfp.fw and a300_pm4.fw symlinks were created, but we'd prefer not to have to do this in the future. So add support to look in both places when loading firmware. Signed-off-by: -
Rob Clark authored
Prep work for the next patch. Signed-off-by: -
Rob Clark authored
Previously, in an effort to defer initializing the gpu until firmware was available (ie. rootfs mounted), the gpu was not loaded at when the subdevice was bound. Which resulted that clks/etc were requested in a place that devm couldn't really help unwind if something failed. Instead move request_firmware() to gpu->hw_init() and construct the gpu earlier in adreno_bind(). To avoid the rest of the driver needing to be aware of a gpu that hasn't managed to load firmware and hw_init() yet, stash the gpu ptr in the adreno device's drvdata, and don't set priv->gpu() until hw_init() succeeds. Signed-off-by: -
Archit Taneja authored
This was used as a placeholder. It was never really input to the MDSS/HDMI clocks. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Rob Clark authored
We need to call reservation_object_reserve_shared() in both cases, but this wasn't happening in the _NO_IMPLICIT submit case. Fixes: f0a42bb5 ("drm/msm: submit support for in-fences") Reported-by:
-
- 25 Oct, 2017 4 commits
-
-
Keith Packard authored
drm_mode_create_lease Creates a lease for a list of drm mode objects, returning an fd for the new drm_master and a 64-bit identifier for the lessee drm_mode_list_lesees List the identifiers of the lessees for a master file drm_mode_get_lease List the leased objects for a master file drm_mode_revoke_lease Erase the set of objects managed by a lease. This should suffice to at least create and query leases. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * query ioctls only query the master associated with the provided file. * 'mask_lease' value has been removed * change ioctl has been removed. Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com> * Add revoke ioctl. Changes for v4 suggested by Dave Airlie <airlied@gmail.com> * Expand on the comment about the magic use of &drm_lease_idr_object * Pad lease ioctl structures to align on 64-bit boundaries Changes for v5 suggested by Dave Airlie <airlied@gmail.com> * Check for non-negative object_id in create_lease to avoid debug output from the kernel. Changes for v6 provided by Dave Airlie <airlied@gmail.com> * For non-universal planes add primary/cursor planes to lease If we aren't exposing universal planes to this userspace client, and it requests a lease on a crtc, we should implicitly export the primary and cursor planes for the crtc. If the lessee doesn't request universal planes, it will just see the crtc, but if it does request them it will then see the plane objects as well. This also moves the object look ups earlier as a side effect, so we'd exit the ioctl quicker for non-existant objects. * Restrict leases to crtc/connector/planes. This only allows leasing for objects we wish to allow. Changes for v7 provided by Dave Airlie <airlied@gmail.com> * Check pad args are 0 * Check create flags and object count are valid. * Check return from fd allocation * Refactor lease idr setup and add some simple validation * Use idr_mutex uniformly (Keith) Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Keith Packard authored
Attempts to modify un-leased objects are rejected with an error. Information returned about unleased objects is modified to make them appear unusable and/or disconnected. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * With the change in the __drm_mode_object_find API to pass the file_priv along, we can now centralize most of the lease-based access checks in that function. * A few places skip that API and require in-line checks. Changes for v3 provided by Dave Airlie <airlied@redhat.com> * remove support for leasing encoders. * add support for leasing planes. Changes for v4 * Only call drm_lease_held if DRIVER_MODESET. Signed-off-by:
-
Keith Packard authored
This provides new data structures to hold "lease" information about drm mode setting objects, and provides for creating new drm_masters which have access to a subset of the available drm resources. An 'owner' is a drm_master which is not leasing the objects from another drm_master, and hence 'owns' them. A 'lessee' is a drm_master which is leasing objects from some other drm_master. Each lessee holds the set of objects which it is leasing from the lessor. A 'lessor' is a drm_master which is leasing objects to another drm_master. This is the same as the owner in the current code. The set of objects any drm_master 'controls' is limited to the set of objects it leases (for lessees) or all objects (for owners). Objects not controlled by a drm_master cannot be modified through the various state manipulating ioctls, and any state reported back to user space will be edited to make them appear idle and/or unusable. For instance, connectors always report 'disconnected', while encoders report no possible crtcs or clones. The full list of lessees leasing objects from an owner (either directly, or indirectly through another lessee), can be searched from an idr in the drm_master of the owner. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * Sub-leasing has been disabled. * BUG_ON for lock checking replaced with lockdep_assert_held * 'change' ioctl has been removed. * Leased objects can always be controlled by the lessor; the 'mask_lease' flag has been removed * Checking for leased status has been simplified, replacing the drm_lease_check function with drm_lease_held. Changes in v3, some suggested by Dave Airlie <airlied@gmail.com> * Add revocation. This allows leases to be effectively revoked by removing all of the objects they have access to. The lease itself hangs around as it's hanging off a file. * Free the leases IDR when the master is destroyed * _drm_lease_held should look at lessees, not lessor * Allow non-master files to check for lease status Changes in v4, suggested by Dave Airlie <airlied@gmail.com> * Formatting and whitespace changes Changes in v5 (airlied) * check DRIVER_MODESET before lease destroy call * check DRIVER_MODESET for lease revoke (Chris) * Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith) Signed-off-by: -
Keith Packard authored
Separate out lease debugging from the core. Signed-off-by:
-
- 24 Oct, 2017 3 commits
-
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Disable perfmon ioctls for now in etnaviv * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: short-circuit perfmon ioctls Revert "drm/etnaviv: submit supports performance monitor requests"
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Final drm-misc feature pull for 4.15: UAPI Changes: - new madvise ioctl for vc4 (Boris) Core Changes: - plane commit tracking fixes (Maarten) - vgaarb improvements for fancy new platforms (aka ppc64 and arm64) by Bjorn Helgaas Driver Changes: - pile of new panel drivers: Toshiba LT089AC19000, Innolux AT043TN24 - more sun4i work to support A10/A20 Tcon and hdmi outputs - vc4: fix sleep in irq handler by making it threaded (Eric) - udl probe/edid read fixes (Robert Tarasov) And a bunch of misc small cleanups/refactors and doc fixes all over. * tag 'drm-misc-next-2017-10-20' of git://anongit.freedesktop.org/drm/drm-misc: (32 commits) drm/vc4: Fix sleeps during the IRQ handler for DSI transactions. drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl drm/panel: simple: add Toshiba LT089AC19000 dma-fence: remove duplicate word in comment drm/panel: simple: add delays for Innolux AT043TN24 drm/panel: simple: add bus flags for Innolux AT043TN24 drm/panel: simple: fix vertical timings for Innolux AT043TN24 drm/atomic-helper: check that drivers call drm_crtc_vblank_off drm: some KMS todo ideas vgaarb: Factor out EFI and fallback default device selection vgaarb: Select a default VGA device even if there's no legacy VGA drm/bridge: adv7511: Fix a use after free drm/sun4i: Add support for A20 display pipeline components drm/sun4i: Add support for A10 display pipeline components drm/sun4i: hdmi: Support HDMI controller on A10 drm/sun4i: tcon: Add support for A10 TCON drm/sun4i: backend: Support output muxing drm/sun4i: tcon: Move out the tcon0 common setup drm/sun4i: tcon: Don't rely on encoders to set the TCON mode drm/sun4i: tcon: Don't rely on encoders to enable the TCON ...
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.15-rc1 This contains a bit of cleanup and some minor fixes for the host1x and Tegra DRM drivers. There's also some more preparatory work for Tegra186 support which I'm not quite ready to send upstream because the GPIO driver needed for HDMI support has been stuck for months, and we can't do much without it. Hopefully that driver will land in v4.15, which would mean we could go ahead with Tegra186 display support in v4.16. * tag 'drm/tegra/for-4.15-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits) drm/tegra: hdmi: Add cec-notifier support drm/tegra: dc: Perform a complete reset sequence drm/tegra: dc: Make sure to set the module clock rate drm/tegra: dc: Simplify atomic plane helper functions drm/tegra: dc: Move some declarations to dc.h drm/tegra: vic: Use of_device_get_match_data() drm/tegra: sor: Use of_device_get_match_data() drm/tegra: hdmi: Use of_device_get_match_data() drm/tegra: dc: Use of_device_get_match_data() drm/tegra: Use u64_to_user_ptr helper gpu: host1x: Fix incorrect comment for channel_request gpu: host1x: Disassemble more instructions gpu: host1x: Improve debug disassembly formatting gpu: host1x: Enable gather filter gpu: host1x: Enable Tegra186 syncpoint protection gpu: host1x: Call of_dma_configure() after setting bus drm/tegra: Add Tegra186 support for VIC gpu: host1x: Add Tegra186 support dt-bindings: host1x: Add Tegra186 information gpu: host1x: syncpt: Request syncpoints per client ...
-
- 23 Oct, 2017 1 commit
-
-
Keith Packard authored
These provide crtc-id based functions instead of pipe-number, while also offering higher resolution time (ns) and wider frame count (64) as required by the Vulkan API. v2: * Check for DRIVER_MODESET in new crtc-based vblank ioctls Failing to check this will oops the driver. * Ensure vblank interupt is running in crtc_get_sequence ioctl The sequence and timing values are not correct while the interrupt is off, so make sure it's running before asking for them. * Short-circuit get_sequence if the counter is enabled and accurate Steal the idea from the code in wait_vblank to avoid the expense of drm_vblank_get/put * Return active state of crtc in crtc_get_sequence ioctl Might be useful for applications that aren't in charge of modesetting? * Use drm_crtc_vblank_get/put in new crtc-based vblank sequence ioctls Daniel Vetter prefers these over the old drm_vblank_put/get APIs. * Return s64 ns instead of u64 in new sequence event Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> v3: * Removed FIRST_PIXEL_OUT_FLAG * Document that the timestamp in the query and event are that of the first pixel leaving the display engine for the display (using the same wording as the Vulkan spec). Suggested-by:
Michel Dänzer <michel@daenzer.net> Acked-by:
-
- 22 Oct, 2017 2 commits
-
-
Lucas Stach authored
The feature implementation isn't stable yet. Reject any attempt to use the IOCTLs for now. This keeps most of the code in place, so we can stabilize it in-tree, but keeps userspace from using the feature for now. Signed-off-by:Lucas Stach <l.stach@pengutronix.de>
-
Lucas Stach authored
The performance monitoring feature isn't stable enough yet, so don't advertise it to userspace yet. Signed-off-by:
-
- 20 Oct, 2017 13 commits
-
-
Keith Packard authored
Place drm_event_vblank in a new union that includes that and a bare drm_event structure. This will allow new members of that union to be added in the future without changing code related to the existing vbl event type. Assignments to the crtc_id field are now done when the event is allocated, rather than when delievered. This way, delivery doesn't need to have the crtc ID available. v2: * Remove 'dev' argument from create_vblank_event It wasn't being used anyways, and if we need it in the future, we can always get it from crtc->dev. * Check for MODESETTING before looking for crtc in queue_vblank_event UMS drivers will oops if we try to get a crtc, so make sure we're modesetting before we try to find a crtc_id to fill into the event. Signed-off-by:
-
Keith Packard authored
This modifies the datatypes used by the vblank code to provide 64 bits of vblank count. The driver interfaces have been left using 32 bits of vblank count; all of the code necessary to widen that value for the user API was already included to handle devices returning fewer than 32-bits. This will provide the necessary datatypes for the Vulkan API. v2: * Re-write wait_vblank ioctl to ABSOLUTE sequence When an application uses the WAIT_VBLANK ioctl with RELATIVE or NEXTONMISS bits set, the target vblank interval is updated within the kernel. We need to write that target back to the ioctl buffer and update the flags bits so that if the wait is interrupted by a signal, when it is re-started, it will target precisely the same vblank count as before. * Leave driver API with 32-bit vblank count v3: * Rebase on top of Arnd Bergmann's patch which had the switch to ktime_t parts. [airlied: fix conflict with Ville vblank change]. Suggested-by: -
Hans Verkuil authored
In order to support CEC the HDMI driver has to inform the CEC driver whenever the physical address changes. So when the EDID is read the CEC driver has to be informed and whenever the hotplug detect goes away. This is done through the cec-notifier framework. The link between the HDMI driver and the CEC driver is done through the hdmi-phandle property in the tegra-cec node in the device tree. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
In order for the reset to be applied properly, the module clock must be enabled during the assertion. Signed-off-by: -
Thierry Reding authored
When applying the PLL changes from the computed state object, make sure to set the rate of the display controller module clock. Failing to do so can yield to a situation where the parent will be set to the proper pixel clock, but the module clock will be divided down to the rate that is happened to be set to before the parent rate change. Signed-off-by: -
Thierry Reding authored
Remove the tegra_dc_disable_window() function whose only purpose was to allow tegra_plane_atomic_update() to also call it. Fix that by shuffling tegra_plano_atomic_disable() to before tegra_plane_atomic_update(). While at it, also remove the overlay plane helper functions because they are exactly the same as the primary plane helper functions. Signed-off-by: -
Thierry Reding authored
Move the DC related declarations in drm.h to dc.h where they belong. Signed-off-by: -
Thierry Reding authored
Avoid some boilerplate by calling of_device_get_match_data() instead of open-coding the equivalent in the driver. Signed-off-by: -
Thierry Reding authored
Avoid some boilerplate by calling of_device_get_match_data() instead of open-coding the equivalent in the driver. Signed-off-by: -
Thierry Reding authored
Avoid some boilerplate by calling of_device_get_match_data() instead of open-coding the equivalent in the driver. Signed-off-by: -
Thierry Reding authored
Avoid some boilerplate by calling of_device_get_match_data() instead of open-coding the equivalent in the driver. Signed-off-by: -
Mikko Perttunen authored
Use the u64_to_user_ptr helper macro to cast IOCTL argument u64 values to user pointers instead of writing out the cast manually. Also do some other cleanup with user pointers to make them stand out more and look cleaner. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
-
Mikko Perttunen authored
This function actually doesn't sleep in the version that was merged. Signed-off-by:
-
