- 29 May, 2005 8 commits
-
-
Michael Chan authored
Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This improves the bridge local receive path by avoiding going through another softirq. The bridge receive path is already being called from a netif_receive_skb() there is no point in going through another receiveq round trip. Recursion is limited because bridge can never be a port of a bridge so handle_bridge() always returns. Signed-off-by: -
Stephen Hemminger authored
Avoid poisoning of the bridge forwarding table by frames that have been dropped by filtering. This prevents spoofed source addresses on hostile side of bridge from causing packet leakage, a small but possible security risk. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Stephen Hemminger authored
Make features of the bridge pseudo-device be a subset of the underlying devices. Motivated by Xen and others who use bridging to do failover. Signed-off-by: Catalin BOIE <catab at umrella.ro> Signed-off-by:
-
Stephen Hemminger authored
The features field in netdevice is really a bitmask, and bitmask's should be unsigned. Signed-off-by:
-
Stephen Hemminger authored
Resend of earlier patch (no changes) from Catalin used to provide device feature change notification. Signed-off-by: Catalin BOIE <catab at umbrella.ro> Acked-by:
-
-
Vojtech Pavlik authored
Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
- 28 May, 2005 32 commits
-
-
Kumar Gala authored
Trying to initialize the i8259 PIC will not work if CONFIG_PCI is not enabled. The kernel hangs if the initialization is tried. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
This change allows mpc83xx_restart to issue a software reset. Signed-off-by:
Randy Vinson <rvinson@mvista.com> Signed-off-by:
-
Kumar Gala authored
The call to io_block_mapping was creating an invalid BAT entry because the value of BCSR_SIZE (32K) is too small to be used in a BAT (128K min). This change removes the io_block_mapping call since these registers can easily be mapped using ioremap at the point of use. Signed-off-by:
-
Kumar Gala authored
The error checking for emulation of load string instructions was overly generous and would cause certain valid forms of the instructions to be treated as illegal. We drop the range checking since the architecture allows this to be boundedly undefined. Tests on CPUs that support these instructions appear not do cause illegal instruction traps on range errors and just allow the execution to occur. Thanks to Kim Phillips for debugging this and figuring out what real HW was doing. Signed-off-by:
-
Kumar Gala authored
The patch that introduced support for the VIA chipset broke building if CONFIG_PCI is disabled. Signed-off-by:
-
Vitaly Bordug authored
This patch adds on-chip PCI bridge support for the PQ2 family. The incomplete existent code is updated with interrupt handling stuff and board-specific bits for 8272ADS and PQ2FADS; the related files were renamed (from m8260_pci to m82xx_pci) to be of more generic fashion. This is tested with 8266ADS and 8272ADS, should work on PQ2FADS as well. Signed-off-by:
Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by:
-
Kumar Gala authored
Add support for the VIA IDE controller that exists on the MPC8555 CDS system. Updated the config for the system to enable support by default. Signed-off-by:
Scott Hall <shall@mvista.com> Signed-off-by:
-
Kumar Gala authored
Some debug registers needed to be initialized early on to allow proper support for KGDB. Additionally, we need to setup the ppc.md_early_serial_map function pointer on boards that have serial support for KGDB. Signed-off-by:
-
Kumar Gala authored
The existing make rule when building a uImage would check to see if the image file existed to report 'is ready' or 'not made'. However make appeared to compute the file list before the rule was executed. Signed-off-by:
Chris Clark <cpclark@xmission.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
This var is currently useless, as it's apparent from reading the code. Until 2.6.11 it was used in some code related to jail mode, in the same proc.: if(jail){ while(!reading) sched_yield(); } jail mode has been dropped, together with that use, so let's finish dropping this. Also, remove some other useless definitions I met. Acked-by:Jeff Dike <jdike@addtoit.com> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fix it a bit (after some cross checking with "man arch_prctl"). There were: *) typos FS/GS and back *) FS in place of FS_BASE (and the same for GS) *) the procedure used put_user on &addr, where addr was the parameter (i.e. changed its param with put_user, completely useless) rather than interpreting addr as a pointer, as requested in this case (see the man page). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
After porting this fixlet to UML: http://linux.bkbits.net:8080/linux-2.5/cset@41791ab52lfMuF2i3V-eTIGRBbDYKQ , I've also added a warning which should refuse compilation with insane values for PREEMPT_ACTIVE... maybe we should simply move PREEMPT_ACTIVE out of architectures using GENERIC_IRQS. Signed-off-by:
-
Paul Mundt authored
Port Paulus's ppc64 fix to sh: When the generic IRQ stuff went in, it seems that HARDIRQ_BITS got bumped from 9 (for ppc64) up to 12. Consequently, the PREEMPT_ACTIVE bit is now within HARDIRQ_MASK, and I get in_interrupt() falsely returning true when PREEMPT_ACTIVE is set, and thus a BUG_ON tripping in arch/ppc64/mm/tlb.c. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
This is a continuation for UML of: http://linux.bkbits.net:8080/linux-2.5/cset@41791ab52lfMuF2i3V-eTIGRBbDYKQSigned-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Copy (and adapt) to UML the stack code dumper used in i386 when CONFIG_FRAME_POINTER is enabled. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Until now, FRAME_POINTER was set = DEBUG_INFO for UML. Change it to be the default way, so that it can be enabled alone (for instance to get better backtraces on crashes). The call-trace dumper which uses the frame pointer is not yet in, I'm going to introduce it in a separate patch. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Add a MODULE_LICENSE("GPL") to the driver, remove some unused macros and add the GPL license (it's GPL-licensed anyway since it's a GPL-derivative, apart that Jeff Dike releases GPL software, in case anybody is wondering). Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
Actually, the real support was added by some earlier patches. Now we simply re-enable the config. option. I've actually tested it and it works well. Signed-off-by:
-
Jeff Dike authored
This removes two now unused files and a couple of unused functions. Signed-off-by:
-
Jeff Dike authored
We need to disable signals on exit in all cases, not just when rebooting. Signed-off-by:
-
Jeff Dike authored
One of the ubd driver help strings was bust. Signed-off-by:
-
Jeff Dike authored
Remove old useless header that was used in Ye Olde Times during 2.4->2.5 porting to abstract differences. It's definitions are no more used anyway, so let's finally kill it. Signed-off-by:
-
Jeff Dike authored
We should turn off kmalloc when getting a fatal signal regardless of the mode we're in. Signed-off-by:
-
Jeff Dike authored
Eliminate an unused variable warning in ptrace.c and a size mismatch warning by adding a cast to __pa. Signed-off-by:
-
Manu Abraham authored
Miscellaneous cleanup Signed-off-by:
Manu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Cleanup unnecessary (and undesirable) casts, demodulator_priv is already a void*. Suggestion from Andrew Morton Signed-off-by:
-
Manu Abraham authored
The bug was visible as a warning with gcc-3.4.4 (prerelease) Message: drivers/media/dvb/bt8xx/dst.c:1349: warning: initialization from incompatible pointer type. Signed-off-by:
-
Vojtech Pavlik authored
Signed-off-by:
-
Patrick McManus authored
On Nov 16 2004 a change to intelfbdrv.c was commited (as part of 0.9.2 it looks like) that added __initdata to all of the module param variables that seems to create the opportunity for an oops. I've recently been chasing an OOPS (http://marc.theaimsgroup.com/?l=linux-kernel&m=111552250920370&w=2) I created by reading every file on the /sys file system and I've traced it back to this code in the intelfbdrv. Though I had root privs in my initial problem report, it turns out they are un-necessary to generate the oops - all you've got to do is "cat /sys/module/intelfb/parameters/mode" enough times and eventually it will oops. This is because sysfs automatically exports all module_param declarations to the sysfs file system.. which means those variables can be dynamically evaluated at any later time, which of course means marking them __initdata is a bad idea ;).. when they happen to be char *'s it is an especially bad idea ;). Applying the patch below clears up the OOPS for me. Signed-off-by:
Patrick McManus <mcmanus@ducksong.com> Signed-off-by:
-
Pavel Machek authored
Do not send empty events to gpm. (Keyboards are assumed to have scroll wheel these days, that makes them part-mouse. That means typing on keyboard generates empty mouse events). From: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
