- 19 Jul, 2018 32 commits
-
-
Joerg Roedel authored
Define INIT_PGD to point to the correct initial page-table for 32 and 64 bit and use it where needed. This fixes the build on 32 bit with CONFIG_PAGE_TABLE_ISOLATION enabled. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Pavel Machek <pavel@ucw.cz> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-32-git-send-email-joro@8bytes.org
-
Joerg Roedel authored
The mapping for entry-text might have changed in the kernel after it was cloned to the user page-table. Clone again to update the user page-table to bring the mapping in sync with the kernel again. Signed-off-by:
-
Joerg Roedel authored
Introduce a new function to finalize the kernel mappings for the userspace page-table after all ro/nx protections have been applied to the kernel mappings. Also move the call to pti_clone_kernel_text() to that function so that it will run on 32 bit kernels too. Signed-off-by:
-
Joerg Roedel authored
Mapping the kernel text area to user-space makes only sense if it has the same permissions as in the kernel page-table. If permissions are different this will cause a TLB reload when using the kernel page-table, which is as good as not mapping it at all. On 64-bit kernels this patch makes no difference, as the whole range cloned by pti_clone_kernel_text() is mapped RO anyway. On 32 bit there are writeable mappings in the range, so just keep the permissions as they are. Signed-off-by:
-
Joerg Roedel authored
The pti_clone_kernel_text() function references __end_rodata_hpage_align, which is only present on x86-64. This makes sense as the end of the rodata section is not huge-page aligned on 32 bit. Nevertheless a symbol is required for the function that points at the right address for both 32 and 64 bit. Introduce __end_rodata_aligned for that purpose and use it in pti_clone_kernel_text(). Signed-off-by:
-
Joerg Roedel authored
Cloning on the P4D level would clone the complete kernel address space into the user-space page-tables for PAE kernels. Cloning on PMD level is fine for PAE and legacy paging. Signed-off-by:
-
Joerg Roedel authored
Move it out of the X86_64 specific processor defines so that its visible for 32bit too. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-26-git-send-email-joro@8bytes.org
-
Joerg Roedel authored
The addr counter will overflow if the last PMD of the address space is cloned, resulting in an endless loop. Check for that and bail out of the loop when it happens. Signed-off-by:
-
Joerg Roedel authored
Also populate the user-spage pgd's in the user page-table. Signed-off-by:
-
Joerg Roedel authored
When a PGD entry is populated, make sure to populate it in the user page-table too. Signed-off-by:
-
Joerg Roedel authored
Generic page-table code populates all non-leaf entries with _KERNPG_TABLE bits set. This is fine for all paging modes except PAE. In PAE mode only a subset of the bits is allowed to be set. Make sure to only set allowed bits by masking out the reserved bits. Signed-off-by:
-
Joerg Roedel authored
These two functions are required for PTI on 32 bit: * pgdp_maps_userspace() * pgd_large() Also re-implement pgdp_maps_userspace() so that it will work on 64 and 32 bit kernels. Signed-off-by:
-
Joerg Roedel authored
There it is also usable from 32 bit code. Signed-off-by:
-
Joerg Roedel authored
Make them available on 32 bit and clone_pgd_range() happy. Signed-off-by:
-
Joerg Roedel authored
Allocate a kernel and a user page-table root when PTI is enabled. Also allocate a full page per root for PAE because otherwise the bit to flip in CR3 to switch between them would be non-constant, which creates a lot of hassle. Keep that for a later optimization. Signed-off-by:
-
Joerg Roedel authored
With PTI the per-process LDT must be mapped into the kernel address-space for each process, which requires separate kernel PMDs per PGD. Signed-off-by:
-
Joerg Roedel authored
The way page-table folding is implemented on 32 bit, these functions are not only setting, but also PUDs and even PMDs. Give the function a more generic name to reflect that. Signed-off-by:
-
Joerg Roedel authored
The function does not update sp0 anymore but updates makes the task-stack visible for entry code. This is by either writing it to sp1 or by doing a hypercall. Rename the function to get rid of the misleading name. Signed-off-by:
-
Joerg Roedel authored
The NMI handler is special, as it needs to leave with the same CR3 as it was entered with. This is required because the NMI can happen within kernel context but with user CR3 already loaded, i.e. after switching to user CR3 but before returning to user space. Signed-off-by:
-
Joerg Roedel authored
Add unconditional cr3 switches between user and kernel cr3 to all non-NMI entry and exit points. Signed-off-by:
-
Joerg Roedel authored
The common exception entry code now handles the entry-from-sysenter stack situation and makes sure to leave with the same stack as it entered the kernel. So there is no need anymore for the special handling in the debug entry code. Signed-off-by:
-
Joerg Roedel authored
It is possible that the kernel is entered from kernel-mode and on the entry-stack. The most common way this happens is when an exception is triggered while loading the user-space segment registers on the kernel-to-userspace exit path. The segment loading needs to be done after the entry-stack switch, because the stack-switch needs kernel %fs for per_cpu access. When this happens, make sure to leave the kernel with the entry-stack again, so that the interrupted code-path runs on the right stack when switching to the user-cr3. Detect this condition on kernel-entry by checking CS.RPL and %esp, and if it happens, copy over the complete content of the entry stack to the task-stack. This needs to be done because once the exception handler is entereed, the task might be scheduled out or even migrated to a different CPU, so this cannot rely on the entry-stack contents. Leave a marker in the stack-frame to detect this condition on the exit path. On the exit path the copy is reversed, copy all of the remaining task-stack back to the entry-stack and switch to it. Signed-off-by:
-
Joerg Roedel authored
These macros will be used in the NMI handler code and replace plain SAVE_ALL and RESTORE_REGS there. The NMI-specific CR3-switch will be added to these macros later. Signed-off-by:
-
Joerg Roedel authored
Switch back to the trampoline stack before returning to userspace. Signed-off-by:
-
Joerg Roedel authored
Use the entry-stack as a trampoline to enter the kernel. The entry-stack is already in the cpu_entry_area and will be mapped to userspace when PTI is enabled. Signed-off-by:
-
Joerg Roedel authored
Use a separate return path when returning to the kernel. This allows to put the PTI cr3-switch and the switch to the entry-stack into the return-to-user path without further checking. Signed-off-by:
-
Joerg Roedel authored
NMI will no longer use most of the shared return path, because NMI needs special handling when the CR3 switches for PTI are added. Prepare for that change. Signed-off-by:
-
Joerg Roedel authored
This makes it easier to split up the shared iret code path. Signed-off-by:
-
Joerg Roedel authored
x86_tss.sp0 will be used to point to the entry stack later to use it as a trampoline stack for other kernel entry points besides SYSENTER. So store the real task stack pointer in x86_tss.sp1, which is otherwise unused by the hardware, as Linux doesn't make use of Ring 1. Signed-off-by:
-
Joerg Roedel authored
The stack address doesn't need to be stored in tss.sp0 if the stack is switched manually like on sysenter. Rename the offset so that it still makes sense when its location is changed in later patches. This stackk will also be used for all kernel-entry points, not just sysenter. Reflect that and the fact that it is the offset to the task-stack location in the name as well. Signed-off-by:
-
Joerg Roedel authored
These offsets will be used in 32 bit assembly code as well, so make them available for all of x86 code. Signed-off-by:
-
Jiang Biao authored
SPECTRE_V2_IBRS in enum spectre_v2_mitigation is never used. Remove it. Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
-
- 16 Jul, 2018 2 commits
-
-
Jiang Biao authored
pti_set_kernel_image_nonglobal() is only used in pti.c, make it static. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: luto@kernel.org Cc: hpa@zytor.com Cc: albcamus@gmail.com Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/r/1531713820-24544-4-git-send-email-jiang.biao2@zte.com.cn
-
Ville Syrjälä authored
APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 15 Jul, 2018 1 commit
-
-
Hugh Dickins authored
Markus reported that BTS is sporadically missing the tail of the trace in the perf_event data buffer: [decode error (1): instruction overflow] shown in GDB; and bisected it to the conversion of debug_store to PTI. A little "optimization" crept into alloc_bts_buffer(), which mistakenly placed bts_interrupt_threshold away from the 24-byte record boundary. Intel SDM Vol 3B 17.4.9 says "This address must point to an offset from the BTS buffer base that is a multiple of the BTS record size." Revert "max" from a byte count to a record count, to calculate the bts_interrupt_threshold correctly: which turns out to fix problem seen. Fixes: c1961a46 ("x86/events/intel/ds: Map debug buffers in cpu_entry_area") Reported-and-tested-by:
Markus T Metzger <markus.t.metzger@intel.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
- 14 Jul, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Two fixes for 4.18: - an important core fix for RTCs using the core offsetting only one driver is affected - a fix for the error path of mrst" * tag 'rtc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: fix alarm read and set offset rtc: mrst: fix error code in probe() -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two related fixes for a boot failure of Xen PV guests" * tag 'for-linus-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: setup pv irq ops vector earlier xen: remove global bit from __default_kernel_pte_mask for pv guests
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single regression fix (from 4.17) for bsg, fixing an EINVAL return on non-data commands" * tag 'for-linus-20180713' of git://git.kernel.dk/linux-block: bsg: fix bogus EINVAL on non-data commands
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches form Andrew Morton <akpm@linux-foundation.org>: reiserfs: fix buffer overflow with long warning messages checkpatch: fix duplicate invalid vsprintf pointer extension '%p<foo>' messages mm: do not bug_on on incorrect length in __mm_populate() mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE fs, elf: make sure to page align bss in load_elf_library x86/purgatory: add missing FORCE to Makefile target net/9p/client.c: put refcount of trans_mod in error case in parse_opts() mm: allow arch to supply p??_free_tlb functions autofs: fix slab out of bounds read in getname_kernel() fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps* mm: do not drop unused pages when userfaultd is running
-
Eric Biggers authored
ReiserFS prepares log messages into a 1024-byte buffer with no bounds checks. Long messages, such as the "unknown mount option" warning when userspace passes a crafted mount options string, overflow this buffer. This causes KASAN to report a global-out-of-bounds write. Fix it by truncating messages to the buffer size. Link: http://lkml.kernel.org/r/20180707203621.30922-1-ebiggers3@gmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+b890b3335a4d8c608963@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
