- 20 Apr, 2012 5 commits
-
-
Arnaldo Carvalho de Melo authored
Just use a left arrow prefixing retqs. Requested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-tnpfijuomrntbnl5vr6ibdwa@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Using up/down arrows just before the instruction, replacing the actual chars with approximations to avoid mail encoding snafus: avtab_search_node 0.00 | push %rbp 0.00 | mov %rsp,%rbp 0.00 | callq mcount 0.00 | movzwl 0x6(%rsi),%edx 0.00 | and $0x7fff,%dx 0.00 | test %rdi,%rdi 0.00 | v jne 20 0.00 | 17: xor %eax,%eax 0.00 | 19: leaveq 0.00 | retq 0.00 | nopl 0x0(%rax,%rax,1) 0.00 | 20: mov (%rdi),%rax 0.00 | test %rax,%rax 0.00 | ^ je 17 0.00 | movzwl (%rsi),%ecx 0.00 | movzwl 0x2(%rsi),%r9d 0.00 | movzwl 0x4(%rsi),%r8d 0.00 | movzwl %cx,%esi 0.00 | movzwl %r9w,%r10d 0.00 | shl $0x9,%esi 0.00 | lea (%rsi,%r10,4),%esi 0.00 | lea (%r8,%rsi,1),%esi 0.00 | and 0x10(%rdi),%si 0.00 | movzwl %si,%esi 0.00 | mov (%rax,%rsi,8),%rax 0.00 | test %rax,%rax 0.00 | ^ je 19 0.00 | nopw 0x0(%rax,%rax,1) 0.00 | 60: cmp %cx,(%rax) 0.00 | v jne 7e 0.00 | cmp %r9w,0x2(%rax) 0.00 | v jne 7e 0.00 | cmp %r8w,0x4(%rax) 0.00 | v jne 79 0.00 | test %dx,0x6(%rax) 0.00 | ^ jne 19 0.00 | 79: cmp %r8w,0x4(%rax) 93.04 | 7e:^ ja 17 2.53 | mov 0x10(%rax),%rax 4.43 | test %rax,%rax 0.00 | ^ jne 60 0.00 | leaveq 0.00 | retq Next low hanging fruit is to use left arrow for retqs, then work on clearling marking loops. Requested-by: -
Arnaldo Carvalho de Melo authored
0.00 | callq ffffffff8112f190 <__mod_zone_page_state> Becomes: 0.00 | callq __mod_zone_page_state But if you press 'o' it gets verbose, i.e. as in objdump -dS: 0.00 | ffffffff8116bdda: callq ffffffff8112f190 <__mod_zone_page_state> Requested-by: -
Arnaldo Carvalho de Melo authored
We need to cope with things like: $ objdump -d --no-show-raw -S -C /lib/modules/3.4.0-rc2+/build/vmlinux <SNIP> ffffffff8125ec60 <copy_user_generic_unrolled>: * Output: * eax uncopied bytes or 0 if successful. */ ENTRY(copy_user_generic_unrolled) CFI_STARTPROC cmpl $8,%edx ffffffff8125ec60: cmp $0x8,%edx jb 20f /* less then 8 bytes, go to byte copy loop */ ffffffff8125ec63: jb ffffffff8125ecf5 <copy_user_generic_unrolled+0x95> ALIGN_DESTINATION <SNIP> ffffffff8125ec8d: je ffffffff8125ecd9 <copy_user_generic_unrolled+0x79> 1: movq (%rsi),%r8 ffffffff8125ec8f: mov (%rsi),%r8 2: movq 1*8(%rsi),%r9 ffffffff8125ec92: mov 0x8(%rsi),%r9 3: movq 2*8(%rsi),%r10 ffffffff8125ec96: mov 0x10(%rsi),%r10 4: movq 3*8(%rsi),%r11 <SNIP> Probably expect that the length of the addr field be the same... Lazy move for now, back to supporting suppressing the address on callq lines... Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7hp85vnvowpqj8799f8rxbu1@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So that the ins_ops can handle them in a single place, instead of adding more and more functions or ins_ops parameters. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pk4dqaum6ftiz104dvimwgtb@git.kernel.orgSigned-off-by:
-
- 19 Apr, 2012 8 commits
-
-
Arnaldo Carvalho de Melo authored
Taken from binutils: [acme@sandy binutils-2.22]$ grep ^j opcodes/i386-opc.tbl | cut -d, -f1 | sort -u Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-mwshob8n12jlsu458ghvheos@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Where we had ':'. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-l8gbejzpglnwiwk43450h31g@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
But now we have a lot of space on the right... Perhaps we should add a "Trending on G+" gizmo... ;-) Requested-by:
-
Arnaldo Carvalho de Melo authored
Find out at browser startup the max width and use it when rendering jump labels on the screen. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7dxjiwqb77wz6f5lc05e0i0x@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
This: 0.00 : ffffffff8116bd00: lock btsl $0x0,(%r12) 100.00 : ffffffff8116bd07: sbb %eax,%eax 0.00 : ffffffff8116bd09: test %eax,%eax 0.00 : ffffffff8116bd0b: jne ffffffff8116bf5f <__mem_cgroup_commit_charge+0x28f> 0.00 : ffffffff8116bd11: mov (%r12),%rax 0.00 : ffffffff8116bd15: test $0x2,%al 0.00 : ffffffff8116bd17: jne ffffffff8116bf6e <__mem_cgroup_commit_charge+0x29e> 0.00 : ffffffff8116bd1d: test %r9b,%r9b 0.00 : ffffffff8116bd20: jne ffffffff8116be30 <__mem_cgroup_commit_charge+0x160> 0.00 : ffffffff8116bd26: xor %eax,%eax 0.00 : ffffffff8116bd28: mov %r13,0x8(%r12) 0.00 : ffffffff8116bd2d: lock orb $0x2,(%r12) 0.00 : ffffffff8116bd33: test %r9b,%r9b 0.00 : ffffffff8116bd36: je ffffffff8116bdf3 <__mem_cgroup_commit_charge+0x123> Becomes: 0.00 : 30: lock btsl $0x0,(%r12) 100.00 : sbb %eax,%eax 0.00 : test %eax,%eax 0.00 : jne 28f 0.00 : mov (%r12),%rax 0.00 : test $0x2,%al 0.00 : jne 29e 0.00 : test %r9b,%r9b 0.00 : jne 160 0.00 : 56: xor %eax,%eax 0.00 : 58: mov %r13,0x8(%r12) 0.00 : lock orb $0x2,(%r12) 0.00 : test %r9b,%r9b 0.00 : je 123 I.e. We trow away all those useless addresses and keep just jump labels. Suggested-by: -
Arnaldo Carvalho de Melo authored
Fixing some off by one cases in the process. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-fxumzufhk829z0q9anmvemea@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Its not just an rb_node, it carries extra state that is private to the browser. And will carry some more in the next patches. Better name it browser_disasm_line, i.e. something derived from disasm_line, that specializes it. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-nev4b97vdvv35we1qmooym52@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
And implement the jump one, where if the operands string is not passed, a compact form that uses just the target address is used. Right now this is toggled via the 'o' option in the annotate browser, switching from: 0.00 : ffffffff811661e8: je ffffffff81166204 <mem_cgroup_count_vm_event+0x44> 0.00 : ffffffff811661ea: cmp $0xb,%esi 0.00 : ffffffff811661ed: je ffffffff811661f8 <mem_cgroup_count_vm_event+0x38> To: 0.00 : 28: je 44 0.00 : 2a: cmp $0xb,%esi 0.00 : 2d: je 38 Suggested-by:
-
- 18 Apr, 2012 2 commits
-
-
Arnaldo Carvalho de Melo authored
No need to do it everytime the user presses enter/-> on a call instruction. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ybgss44m5ycry8mk7b1qdbre@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So that at disassembly time we parse targets, etc. Supporting jump instructions initially, call functions are next. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7vzlh66n5or46n27ji658cnl@git.kernel.orgSigned-off-by:
-
- 16 Apr, 2012 3 commits
-
-
Arnaldo Carvalho de Melo authored
No need to reparse it everytime. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-90ncot487p4h5rzkn8h2whou@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
For lines with instructions find the name and operands, breaking those tokens for consumption by the browser. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6aazb9f5o3d9zi28e6rruv12@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
We want to move away from using 'objdump -dS' as the only disassembler supported. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lsn9pjuxxm5ezsubyhkmprw7@git.kernel.orgSigned-off-by:
-
- 13 Apr, 2012 2 commits
-
-
Ingo Molnar authored
Merge Linux 3.4-rc2: we were on v3.3, update the base. Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Fixes and improvements for perf/core: . Overhaul the tools/ makefiles, gluing them to the top level Makefile, from Borislav Petkov. . Move the UI files from tools/perf/util/ui/ to tools/perf/ui/. Also move the GTK+ browser to tools/perf/ui/gtk/, from Namhyung Kim. . Only fallback to sw cycles counter on ENOENT for the hw cycles, from Robert Richter . Trivial fixes from Robert Richter . Handle the autogenerated bison/flex files better, from Namhyung and Jiri Olsa. . Navigate jump instructions in the annotate browser, just press enter or ->, still needs support for a jump navigation history, i.e. to go back. . Search string in the annotate browser: same keys as vim: / forward n next backward/forward ? backward . Clarify number of events/samples in the report header, from Ashay Rane Signed-off-by:
-
- 11 Apr, 2012 13 commits
-
-
Robert Richter authored
Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw pmu available. This is the case if the syscall reports ENOENT. In other cases (e.g. invalid attributes) we don't want the sw counter to be used. Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.comSigned-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Robert Richter authored
Thread map is actually type pid_t and not int. Signed-off-by:
-
Robert Richter authored
This references are not exported, use static declaration. Signed-off-by:
-
Namhyung Kim authored
Move those files to new directory in order to be prepared to further UI work. Makefile and header file pathes are adjusted accordingly. Also fix a build breakage if NO_GTK2=1 is given. Signed-off-by:
Namhyung Kim <namhyung.kim@lge.com> Suggested-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Acked-by:
Pekka Enberg <penberg@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1333523765-12092-1-git-send-email-namhyung.kim@lge.comSigned-off-by:
-
Namhyung Kim authored
Move those files to new directory in order to be prepared to further UI work. Makefile and header file pathes are adjusted accordingly. Signed-off-by:
-
Namhyung Kim authored
CC util/annotate.o util/annotate.c: In function symbol__annotate: util/annotate.c:87:16: error: parsed_line may be used uninitialized in this function [-Werror=maybe-uninitialized] util/annotate.c:211:22: note: parsed_line was declared here cc1: all warnings being treated as errors make: *** [util/annotate.o] Error 1 make: *** Waiting for unfinished jobs.... Signed-off-by: -
Jiri Olsa authored
Currently the parsers objects (bison/flex related) are each time perf is built. No matter the generated files are already in place, the parser generation is executed every time. Changing the rules to have proper flex/bison objects generation dependencies. The parsers code is not rebuilt until the flex/bison source files are touched. Also when flex/bison source is changed, only dependent objects are rebuilt. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.comSigned-off-by:
-
Borislav Petkov authored
Now you can do $ make tools/<toolname> from the toplevel kernel directory and have the respective tool built. If you want to build and install it, do $ make tools/<toolname>_install $ make tools/<toolname>_clean should clean the respective tool directories. If you want to clean all in tools, simply do $ make tools/clean Also, if you want to get what the possible targets are, simply calling $ make tools/ should give you the short help. $ make tools/install installs all tools, of course. Doh. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.orgSigned-off-by:
-
Borislav Petkov authored
... and make it the default one so that calling 'make' without arguments in the tools/ directory gives you the possible targets to build along with a short description of what they are. Signed-off-by:
-
Borislav Petkov authored
Add a Makefile with all the targets under tools/. Signed-off-by:
-
Borislav Petkov authored
Use += instead of the bash syntax, as Sam Ravnborg suggests. Also, sort the -W options alphabetically and (... keep them sorted). Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Borislav Petkov authored
Put generic enough build settings which could be reused by other tools into a common Makefile.include file. This commit reintroduces QUIET_SUBDIR{0,1} (see a3d1ee10) which are going to be used in the following patches. Signed-off-by: -
Namhyung Kim authored
The commit 65f3e56e ("perf tools: Remove auto-generated bison/flex files") removed those files from git, so they'll be listed on untracked files after building perf. Fix it. Signed-off-by:
-
- 08 Apr, 2012 1 commit
-
-
Linus Torvalds authored
-
- 07 Apr, 2012 6 commits
-
-
Arnaldo Carvalho de Melo authored
Using the same keystrokes as vim: / = search forward n = search next forward/backwards ? = search backwards Still needs to continue from start/end when not found, use HOME + / or END + ? for now. At some point we need a keybindings file to support ones favourite mode, erm, like EMACS, etc. Also we now need a 'h' window with all these keybindings. Requested-by:
Andi Kleen <andi@firstfloor.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.orgSigned-off-by:
-
Ashay Rane authored
This patch prints the number of samples and the count of performance events separately. This allows comparing performance of different applications with each other. Previously, the sample count was displayed against an 'Events:' heading. With this patch, the header now reads (for example): Samples: 5K of event 'instructions' Event count (approx.): 2993026545 The patch covers both the stdio and the browser interface. Signed-off-by:
Ashay Rane <ashay.rane@tacc.utexas.edu> [ committer note: Fixed wrt e7f01d1e ] Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Now it is possible to press ENTER or -> (right arrow) on jump instructions to navigate to the offset it points to. More work needed to support <- to go back, i.e. a jump history. This is done just like the callq case, i.e. parsing objdump output lines, but should move to use Masami's disassembler at some point. Suggested-by:
-
Arnaldo Carvalho de Melo authored
From the hit sorted rb_tree, so that we can use it in the upcoming jump instruction support. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So that we can as well handle jumps. Later we'll move this to a proper intruction table, etc. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The lines in objdump have this format: ffffffff8126543f: jne ffffffff81265494 <__list_del_entry+0x84> <SNIP> ffffffff81265494: mov %rdi,%rcx Since we now have objdump_line allowing tools to print the offset independently from the rest of the line, allow toggling a view where just offsets from the start of the function are shown: 2f: jne ffffffff81265494 <__list_del_entry+0x84> <SNIP> 84: mov %rdi,%rcx The offset view will be the default as soon as operations that deal with offsets in a function are handled accodringly, i.e. in offset view the above will become: 2f: jne __list_del_entry+0x84 <SNIP> 84: mov %rdi,%rcx And then a follow up patch will allow navigating thru jumps, just like we handle callq instructions. Suggested-by:
-
