- 15 Mar, 2011 16 commits
-
-
Will Newton authored
The test file is created under debugfs, not sysfs. Also remove the unnecessary default n. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Will Newton authored
Setting this bit in the clock enable register will stop the clock when the card is in the IDLE state. Signed-off-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Will Newton authored
We need to run the card detect tasklet at the end of slot initialisation as it is possible that a card has been inserted prior to boot, so we don't see an insertion interrupt and now the card is sitting there inserted but with no power to it. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Fabio Estevam authored
Currently MMC_MXC driver can be selected by all i.MX devices. Restrict its use only for the appropriate processors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Simon Horman authored
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Adrian Hunter authored
Add two large sequential I/O performance tests: 35. Large sequential read into scattered pages 36. Large sequential write from scattered pages The tests measure transfer times for 10MiB, 100MiB, 1000MiB. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Adrian Hunter authored
Existing performance tests measure single or sequential I/O speed. Add two random I/O tests: 33. Random read performance by transfer size 34. Random write performance by transfer size Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Adrian Hunter authored
The test area size was set to the preferred erase size but for comparison purposes it is better if it is the same size for different devices. Make it a multiple of preferred erase size that is greater than or equal to 4MiB. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Pierre Tardy authored
This sdio card supports having its sdio clock shutdown. It is also not using the SDIO IRQ, but rather uses a side gpio irq. Signed-off-by: Pierre Tardy <tardyp@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Pierre Tardy authored
Some sdio card are not following sdio standard, and do not work when the sdio bus's clock is gated. To keep functionnality for all legacy driver, we turn this quirk on for every sdio card. Drivers needs to disable the quirk manually when someone verifies that their supported card works with clock gating. Signed-off-by: Pierre Tardy <tardyp@gmail.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Pierre Tardy authored
Some cards have quirks valid for every platforms using current platform quirk hooks leads to a lot of code and debug duplication. So we inspire a bit from what exists in PCI subsystem and do our own per vendorid/deviceid quirk. We still drop the complexity of the pci quirk system (with special section tables, and so on). That can be added later if needed. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Pierre Tardy authored
Since mmc clock gating can also be used as a power gating tip, it's better to put the led blinking after having ungated the clock. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Pawel Moll authored
If the MMC host controller does not support waiting for card signaling busy state (MMC_CAP_WAIT_WHILE_BUSY cap), there is no point in prining the relevant warning message. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Kyungmin Park authored
Samsung SDHCI host controller supports the Auto CMD12. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Marc-André Hébert authored
While the MMC handled the card's read only flag correctly on open, it did not setup the flag in the allocated disk structure. The consequence being that probing the /sys/class/block/mmcblkX/ro attribute always reported 0. Signed-off-by: Marc-Andre Hebert <hebert.marcandre@gmail.com> Reviewed-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Chuanxiao Dong authored
Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
- 09 Mar, 2011 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: fix CONFIG_MMC_UNSAFE_RESUME regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: nd->inode is not set on the second attempt in path_walk() unfuck proc_sysctl ->d_compare() minimal fix for do_filp_open() race
-
Naga Chumbalkar authored
Return 0 on failure. This will cause the initialization of the driver to fail and prevent the driver from loading if the BIOS cannot handle the PCC interface command to "get frequency". Otherwise, the driver will load and display a very high value like "4294967274" (which is actually -EINVAL) for frequency: # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 4294967274 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> CC: stable@kernel.org Signed-off-by: Dave Jones <davej@redhat.com>
-
Al Viro authored
We leave it at whatever it had been pointing to after the first link_path_walk() had failed with -ESTALE. Things do not work well after that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 08 Mar, 2011 7 commits
-
-
Ohad Ben-Cohen authored
30201e7f ("mmc: skip detection of nonremovable cards on rescan") allowed skipping detection of nonremovable cards on mmc_rescan(). The intention was to only skip detection of hardwired cards that cannot be removed, so make sure this is indeed the case by directly checking for (lack of) MMC_CAP_NONREMOVABLE, instead of using mmc_card_is_removable(), which is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. The user-visible symptom of the bug this patch fixes is that no "mmc: card XXXX removed" message appears in dmesg when a card is removed and CONFIG_MMC_UNSAFE_RESUME=y. Reported-and-tested-by: Dmitry Shmidt <dimitrysh@google.com> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Al Viro authored
a) struct inode is not going to be freed under ->d_compare(); however, the thing PROC_I(inode)->sysctl points to just might. Fortunately, it's enough to make freeing that sucker delayed, provided that we don't step on its ->unregistering, clear the pointer to it in PROC_I(inode) before dropping the reference and check if it's NULL in ->d_compare(). b) I'm not sure that we *can* walk into NULL inode here (we recheck dentry->seq between verifying that it's still hashed / fetching dentry->d_inode and passing it to ->d_compare() and there's no negative hashed dentries in /proc/sys/*), but if we can walk into that, we really should not have ->d_compare() return 0 on it! Said that, I really suspect that this check can be simply killed. Nick? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410 ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410 ARM: S3C64XX: Reduce output of s3c64xx_dma_init1() ARM: S3C64XX: Tone down SDHCI debugging ARM: S3C64XX: Add clock for i2c1 ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices ARM: S3C64XX: Fix keypad setup to configure correct number of rows ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02 ARM: S5P64X0: Fix number of GPIO lines in Bank F ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02
-
Linus Torvalds authored
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: davinci: cpufreq: fix section mismatch warning DaVinci: fix compilation warnings in <mach/clkdev.h> davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio ARM: pxa/tosa: register wm9712 codec device ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100 ARM: 6761/1: Update number of VIC for S5PV210 ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request ARM: 6765/1: remove obsolete comment from asm/mach/arch.h ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: Allow sdio operations in other threads during sdio_add_func()
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: index i shadowed in 2nd loop drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously drm/nouveau: fix regression causing ttm to not be able to evict vram drm/i915: Rebind the buffer if its alignment constraints changes with tiling drm/i915: Disable GPU semaphores by default drm/i915: Do not overflow the MMADDR write FIFO Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
-
- 07 Mar, 2011 9 commits
-
-
roel authored
Index i was already used in thhe first loop Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dmitry Shmidt authored
This fixes a bug introduced by 807e8e40 ("mmc: Fix sd/sdio/mmc initialization frequency retries") that prevented SDIO drivers from performing SDIO commands in their probe routines -- the above patch called mmc_claim_host() before sdio_add_func(), which causes a deadlock if an external SDIO driver calls sdio_claim_host(). Fix tested on an OLPC XO-1.75 with libertas on SDIO. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Reviewed-and-Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Dave Airlie authored
* ickle/drm-intel-fixes: drm/i915: Rebind the buffer if its alignment constraints changes with tiling drm/i915: Disable GPU semaphores by default drm/i915: Do not overflow the MMADDR write FIFO Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: mailbox: resolve hang issue OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver arm: mach-omap2: smartreflex: fix another memory leak
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape: deadlock on system work queue [S390] keyboard: integer underflow bug [S390] xpram: remove __initdata attribute from module parameters
-
Ben Skeggs authored
The per-vm mutex doesn't prevent this completely, a flush coming from the BAR VM could potentially happen at the same time as one for the channel VM. Not to mention that if/when we get per-client/channel VM, this will happen far more frequently. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Ben Skeggs authored
TTM assumes an error condition from man->func->get_node() means that something went horribly wrong, and causes it to bail. The driver is supposed to return 0, and leave mm_node == NULL to signal that it couldn't allocate any memory. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
Early gen3 and gen2 chipset do not have the relaxed per-surface tiling constraints of the later chipsets, so we need to check that the GTT alignment is correct for the new tiling. If it is not, we need to rebind. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09 down to the use of GPU semaphores, and we already know that they appear broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling GPU semaphores is simply hiding another bug by the latency and side-effects of the additional device interaction it introduces...) However, use of semaphores is a massive performance improvement... Only as long as the system remains stable. Enable at your peril. Reported-by: Andi Kleen <andi-fd@firstfloor.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 06 Mar, 2011 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't set to D3 in Cirrus errata init verbs ALSA: hda - add new Fermi 5xx codec IDs to snd-hda ASoC: WM8994: Ensure late enable events are processed for the ADCs ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly ASoC: Fix WM9081 platform data initialisation ALSA: hda - Fix unable to record issue on ASUS N82JV ALSA: HDA: Realtek: Fixup jack detection to input subsystem
-
Amit Shah authored
If a virtio-console device gets unplugged while a port is open, a subsequent close() call on the port accesses vqs to free up buffers. This can lead to a crash. The buffers are already freed up as a result of the call to unplug_ports() from virtcons_remove(). The fix is to simply not access vq information if port->portdev is NULL. Reported-by: juzhang <juzhang@redhat.com> CC: stable@kernel.org Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
-