- 22 Sep, 2020 20 commits
-
-
Dave Airlie authored
Merge tag 'cdns-mhdp-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next Cadence MHDP8546 DisplayPort bridge driver Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/5dd15e3c-51ed-49c0-cf49-88c7af38d6b0@ti.com
-
Dave Airlie authored
Merge tag 'exynos-drm-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two cleanups - Simply use dev_err_probe() instead of returning -EPROBE_DEFER. - Drop drm_parms allocation and deallocation code which aren't needed. Signed-off-by:
-
ssh://git.freedesktop.org/git/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.10-rc1 This is a handful of patches that add bridge support for Tegra devices and fix a couple of minor issues. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
Miscellaneous R-Car display driver changes: - R8A7742, R8A774E1 and R8A77961 support - Fixes for pitch of YUV planar formats, non-visible plane handling and VSP device reference count - Kconfig fix to avoid displaying disabled options in .config Signed-off-by:
-
Laurent Pinchart authored
The reference to the VSP device acquired with of_find_device_by_node() in rcar_du_vsp_init() is never released. Fix it with a drmm action, which gets run both in the probe error path and in the remove path. Fixes: 6d62ef3a ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Reported-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Lad Prabhakar authored
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the Kconfig entry description to reflect this. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DU driver handles non-visible planes (fully clipped by the display's boundaries) by considering them as disabled. It thus disables the plane at the hardware level when the plane is moved off-screen. However, if the plane was previously disabled and is non-visible when it gets enabled, the attempt to disable it crashes, as the plane wasn't previously enabled. Fix it. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com>
-
Laurent Pinchart authored
When creating a frame buffer, the driver verifies that the pitches for the chroma planes match the luma plane. This is done incorrectly for fully planar YUV formats, without taking horizontal subsampling into account. Fix it. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds R-Car M3-W+ (R8A77961) support which is compatible with the R-Car M3-W (R8A77960). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
This patch adds R-Car M3-W+ (R8A77961) SoC bindings. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
The DT example erronously uses the "renesas,r8a7795-dw-hdmi", when the correct value is "renesas,r8a7795-hdmi". It is furthermore missing the generic "renesas,rcar-gen3-hdmi" compatible string. Fix it. Signed-off-by:
-
Kuninori Morimoto authored
Document the R-Car M3-W+ (R8A77961) SoC in the R-Car DU bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
The LVDS encoder on RZ/G2H (R8A774E1) SoC is identical to R-Car Gen3 so just reuse the rcar_lvds_gen3_info structure to hookup R8A774E1 to LVDS encoder driver. Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Document RZ/G2H (R8A774E1) SoC bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the RZ/G2H (R8A774E1) LVDS bindings. Signed-off-by:
-
Marian-Cristian Rotariu authored
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output, one LVDS output and one HDMI output. Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings. Signed-off-by:
-
Biju Das authored
Add the support for enabling optional regulator that may be used as VCC source. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Biju Das authored
Document optional power-supply property that may be used to specify the regulator powering up the device. Signed-off-by:
-
Marek Szyprowski authored
Since commit 9495b7e9 ("driver core: platform: Initialize dma_parms for platform devices") driver core handles allocation of the dma_parms structure for platform device, so there is no need to manually allocate nor free it. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- 21 Sep, 2020 2 commits
-
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
- 18 Sep, 2020 4 commits
-
-
Swapnil Jakhade authored
Add J721E wrapper for mhdp, which sets up the clock and data muxes. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Yuti Amonkar <yamonkar@cadence.com> Signed-off-by:
Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by:
-
Swapnil Jakhade authored
Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP) and embedded Display Port (eDP) standards. It integrates uCPU running the embedded Firmware (FW) interfaced over APB interface. Basically, it takes a DPI stream as input and outputs it encoded in DP format. Currently, it supports only SST mode. Co-developed-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
-
Yuti Amonkar authored
Document the bindings used for the Cadence MHDP8546 DPI/DP bridge in yaml format. Signed-off-by:
-
Tomi Valkeinen authored
Merge tag 'phy-attrs-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into 5.10/dp-pull New phy attributes slated for kernel release v5.10. These are needed by the Cadence MHDP driver.
-
- 17 Sep, 2020 6 commits
-
-
Dmitry Osipenko authored
Currently Tegra DRM driver manually manages display panel, but this management could be moved out into DRM core if we'll wrap panel into DRM bridge. This patch wraps RGB panel into a DRM bridge and removes manual handling of the panel from the RGB output code. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Newer Tegra device-trees will specify a video output graph, which involves LVDS encoder bridge. This patch adds support for the LVDS encoder bridge to the RGB output, allowing us to model the display hardware properly. Reviewed-by:
-
Dmitry Osipenko authored
Newer Tegra device-trees will specify a video output graph which involves a bridge. This patch adds initial support for the DRM bridges to the Tegra DRM output. Acked-by:
-
Dmitry Osipenko authored
The OF node should be put before returning error in tegra_output_probe(), otherwise node's refcount will be leaked. Reviewed-by:
-
Thierry Reding authored
Use the of_get_i2c_adapter_by_node(), which is similar to the existing call to of_find_i2c_adapter_by_node() except that it also takes a reference to the owner module of the I2C adapter. In order to properly balance this out, call i2c_put_adapter() to release the reference to the I2C adapter and its owner module. For the special case where the DDC comes from the DPAUX, care must be taken to perform the same steps (i.e. get_device() and module_get()) so that the reference counts are all balanced. Signed-off-by: -
https://github.com/mszyprow/linuxDave Airlie authored
Please pull a set of fixes for various DRM drivers that finally resolve incorrect usage of the scatterlists (struct sg_table nents and orig_nents entries), what causes issues when IOMMU is used. Signed-off-by:
-
- 16 Sep, 2020 2 commits
-
-
Swapnil Jakhade authored
Set Torrent PHY attributes bus_width, max_link_rate and mode for DisplayPort. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1599805114-22063-3-git-send-email-sjakhade@cadence.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Swapnil Jakhade authored
Add new PHY attribute max_link_rate to struct phy_attrs. This indicates maximum link rate supported by PHY (in Mbps). Signed-off-by:
-
- 15 Sep, 2020 5 commits
-
-
Lad Prabhakar authored
The LVDS encoders on RZ/G1H SoC is identical to the R-Car Gen2 family. Add support for RZ/G1H (R8A7742) SoC to the LVDS encoder driver. Signed-off-by:
-
Lad Prabhakar authored
Document the RZ/G1H (R8A7742) LVDS bindings. Signed-off-by:
-
Lad Prabhakar authored
Add direct support for the r8a7742 (RZ/G1H). The RZ/G1H shares a common, compatible configuration with the r8a7790 (R-Car H2) so that device info structure is reused, the only difference being TCON is unsupported on RZ/G1H (Currently unsupported by the driver). Signed-off-by:
-
Lad Prabhakar authored
Document the RZ/G1H (R8A7742) SoC in the R-Car DU bindings. Signed-off-by:
-
Qian Cai authored
There is no need to select DRM_RCAR_WRITEBACK if DRM_RCAR_DU=n which just make the generated .config a bit ugly. # ARM devices # # end of ARM devices CONFIG_DRM_RCAR_WRITEBACK=y # # Frame buffer Devices Let DRM_RCAR_WRITEBACK depend on DRM_RCAR_DU instead. Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
-
- 14 Sep, 2020 1 commit
-
-
Daniel Vetter authored
Paul needs 1a21e5b9 ("drm/ingenic: Fix leak of device_node pointer") and 3b5b005e ("drm/ingenic: Fix driver not probing when IPU port is missing") from -fixes to be able to merge further ingenic patches into -next. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
