The experimental root file system support in cifs.ko relies on
ipconfig to set up the network stack and then accessing the SMB share
that contains the rootfs files.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new virtual device named /dev/cifs (0xfe) to tell the kernel to
mount the root file system over the network by using SMB protocol.

cifs_root_data() will be responsible to retrieve the parsed
information of the new command-line option (cifsroot=) and then call
do_mount_root() with the appropriate mount options for cifs.ko.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: driver updates

These patches are a few updates to clean up some code
issues and add an ethtool feature.

v3: drop the Fixes tags as they really aren't fixing bugs
    simplify ionic_lif_quiesce() as no return is necessary

v2: add cover letter
    edit a couple of patch descriptions for clarity
      and add Fixes: tags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Even though we've already turned off the queue activity with
the ionic_qcq_disable(), we need to wait for any device queues
that are processing packets to drain down before we try to
flush our packets and tear down the queues.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Wire up the --set-fec and --show-fec features in the ethtool
callbacks and pull the related code out of set_link_ksettings.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The user's request for an interrupt coalescing value gets
translated into a hardware value to be used with the NIC,
and was getting reported back based on the hw value, which,
due to hw tic resolution, could be reported as a different
number than what the user originally asked for.  This code
now tracks both the user request and what was put into the
hardware so we can report back to the user what they
requested.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the open-coded ionic_wait_for_bit() with the
kernel's wait_on_bit_lock().
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need for a goto in this bit of code.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: introduce per-netns netdevice notifiers and use them in mlxsw

Some drivers, like mlxsw, are not interested in notifications coming in
for netdevices from other network namespaces. So introduce per-netns
notifiers and allow to reduce overhead by listening only for
notifications from the same netns.

This is also a preparation for upcoming patchset "devlink: allow devlink
instances to change network namespace". This resolves deadlock during
reload mlxsw into initial netns made possible by
328fbe74 ("net: Close race between {un, }register_netdevice_notifier() and setup_net()/cleanup_net()").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw_sp instance is not interested in events happening in other
network namespaces. So use "_net" variants for netdevice notifier
registration/unregistration and get only events which are happening in
the net the instance is in.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Often the code for example in drivers is interested in getting notifier
call only from certain network namespace. In addition to the existing
global netdevice notifier chain introduce per-netns chains and allow
users to register to that. Eventually this would eliminate unnecessary
overhead in case there are many netdevices in many network namespaces.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Push iterations over net namespaces and netdevices from
register_netdevice_notifier() and unregister_netdevice_notifier()
into helper functions. Along with that introduce continue_reverse macros
to make the code a bit nicer allowing to get rid of "last" marks.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a guard clause in tx_bottom() to reduce the indentation of the
do-while loop.

Also, fix a couple of spelling and grammatical mistakes in the
r8152_csum_workaround() function comment.

Change-Id: I460befde150ad92248fd85b0f189ec2df2ab8431
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for MSG_PEEK. In such a case, packets are not
removed from the rx_queue and credit updates are not sent.
Signed-off-by: Matias Ezequiel Vara Larsen <matiasevara@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix NULL-pointer dereference on tty open due to a failure to handle a
missing interrupt-in endpoint when probing modem ports:

	BUG: kernel NULL pointer dereference, address: 0000000000000006
	...
	RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso]
	...
	Call Trace:
	hso_start_serial_device+0xdc/0x140 [hso]
	hso_serial_open+0x118/0x1b0 [hso]
	tty_open+0xf1/0x490

Fixes: 542f5482 ("tty: Modem functions for the HSO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert Renesas Electronics SH EtherMAC bindings documentation to
json-schema.  Also name bindings documentation file according to the compat
string being documented.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adopt and integrate the feature to pass the MAC address via device tree
from asix_device.c (03fc5d4f) also to other ax88179 based asix chips.
E.g. the bootloader fills in local-mac-address and the driver will then
pick up and use this MAC address.
Signed-off-by: Peter Fink <pfink@christ-es.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just put related code together to ease code reading: the memcpy() is
related to the nla_reserve().
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: introduce alternative names for network interfaces

In the past, there was repeatedly discussed the IFNAMSIZ (16) limit for
netdevice name length. Now when we have PF and VF representors
with port names like "pfXvfY", it became quite common to hit this limit:
0123456789012345
enp131s0f1npf0vf6
enp131s0f1npf0vf22

Udev cannot rename these interfaces out-of-the-box and user needs to
create custom rules to handle them.

Also, udev has multiple schemes of netdev names. From udev code:
 * Type of names:
 *   b<number>                             - BCMA bus core number
 *   c<bus_id>                             - bus id of a grouped CCW or CCW device,
 *                                           with all leading zeros stripped [s390]
 *   o<index>[n<phys_port_name>|d<dev_port>]
 *                                         - on-board device index number
 *   s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
 *                                         - hotplug slot index number
 *   x<MAC>                                - MAC address
 *   [P<domain>]p<bus>s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
 *                                         - PCI geographical location
 *   [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]
 *                                         - USB port number chain
 *   v<slot>                               - VIO slot number (IBM PowerVM)
 *   a<vendor><model>i<instance>           - Platform bus ACPI instance id
 *   i<addr>n<phys_port_name>              - Netdevsim bus address and port name

One device can be often renamed by multiple patterns at the
same time (e.g. pci address/mac).

This patchset introduces alternative names for network interfaces.
Main goal is to:
1) Overcome the IFNAMSIZ limitation (altname limitation is 128 bytes)
2) Allow to have multiple names at the same time (multiple udev patterns)
3) Allow to use alternative names as handle for commands

The patchset introduces two new commands to add/delete list of properties.
Currently only alternative names are implemented but the ifrastructure
could be easily extended later on. This is very similar to the list of vlan
and tunnels being added/deleted to/from bridge ports.

See following examples.

$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff

-> Add alternative names for dummy0:

$ ip link prop add dummy0 altname someothername
$ ip link prop add dummy0 altname someotherveryveryveryverylongname
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname
$ ip link show someotherveryveryveryverylongname
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname

-> Add bridge brx, add it's alternative name and use alternative names to
   do enslavement.

$ ip link add name brx type bridge
$ ip link prop add brx altname mypersonalsuperspecialbridge
$ ip link set someotherveryveryveryverylongname master mypersonalsuperspecialbridge
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge

-> Add ipv4 address to the bridge using alternative name:

$ ip addr add 192.168.0.1/24 dev mypersonalsuperspecialbridge
$ ip addr show mypersonalsuperspecialbridge
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge
    inet 192.168.0.1/24 scope global brx
       valid_lft forever preferred_lft forever

-> Delete one of dummy0 alternative names:

$ ip link prop del dummy0 altname someotherveryveryveryverylongname
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge

-> Add multiple alternative names at once

$ ip link prop add dummy0 altname a altname b altname c altname d
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname a
    altname b
    altname c
    altname d
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the basic rtnetlink commands to use alternative interface names
as a handle instead of ifindex and ifname.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce helper function rtnl_get_dev() that gets net_device structure
instance pointer according to passed ifname or ifname attribute.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__rtnl_newlink() code flow is a bit different around tb[IFLA_IFNAME]
processing comparing to the other places. Change that to be unified with
the rest.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend exiting getlink info message with list of properties. Now the
only ones are alternative names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add two commands to add and delete list of link properties. Implement
the first property type along - alternative ifnames.
Each net device can have multiple alternative names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce name_node structure to hold name of device and put it into
hashlist instead of putting there struct net_device directly. Add a
necessary infrastructure to manipulate the hashlist. This prepares
the code to use the same hashlist for alternative names introduced
later in this set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Name hashlist is going to be used for more than just dev->name, so use
rather index hashlist for iteration over net_device instances.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_twsk_unique() has a hard coded assumption about ipv4 loopback
being 127/8

Lets instead use the standard ipv4_is_loopback() method,
in a new ipv6_addr_v4mapped_loopback() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function netif_schedule_queue() has a hardcoded comparison between queue
state and any xoff flag. This comparison does the same thing as method
netif_xmit_stopped(). In terms of code clarity, it is better. See other
methods like: generic_xdp_tx() and dev_direct_xmit().
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same for-loop check for the LINK_LIST_READY bit of an OOB_CTRL
register is used in several places. Factor these out into a single
function to reduce the lines of code.

Change-Id: I20e8f327045a72acc0a83e2d145ae2993ab62915
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

Merge hugepage allocation updates from David Rientjes:
 "We (mostly Linus, Andrea, and myself) have been discussing offlist how
  to implement a sane default allocation strategy for hugepages on NUMA
  platforms.

  With these reverts in place, the page allocator will happily allocate
  a remote hugepage immediately rather than try to make a local hugepage
  available. This incurs a substantial performance degradation when
  memory compaction would have otherwise made a local hugepage
  available.

  This series reverts those reverts and attempts to propose a more sane
  default allocation strategy specifically for hugepages. Andrea
  acknowledges this is likely to fix the swap storms that he originally
  reported that resulted in the patches that removed __GFP_THISNODE from
  hugepage allocations.

  The immediate goal is to return 5.3 to the behavior the kernel has
  implemented over the past several years so that remote hugepages are
  not immediately allocated when local hugepages could have been made
  available because the increased access latency is untenable.

  The next goal is to introduce a sane default allocation strategy for
  hugepages allocations in general regardless of the configuration of
  the system so that we prevent thrashing of local memory when
  compaction is unlikely to succeed and can prefer remote hugepages over
  remote native pages when the local node is low on memory."

Note on timing: this reverts the hugepage VM behavior changes that got
introduced fairly late in the 5.3 cycle, and that fixed a huge
performance regression for certain loads that had been around since
4.18.

Andrea had this note:

 "The regression of 4.18 was that it was taking hours to start a VM
  where 3.10 was only taking a few seconds, I reported all the details
  on lkml when it was finally tracked down in August 2018.

     https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/

  __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio
  workload degrade like in the "current upstream" above. And it still
  would have been that bad as above until 5.3-rc5"

where the bad behavior ends up happening as you fill up a local node,
and without that change, you'd get into the nasty swap storm behavior
due to compaction working overtime to make room for more memory on the
nodes.

As a result 5.3 got the two performance fix reverts in rc5.

However, David Rientjes then noted that those performance fixes in turn
regressed performance for other loads - although not quite to the same
degree.  He suggested reverting the reverts and instead replacing them
with two small changes to how hugepage allocations are done (patch
descriptions rephrased by me):

 - "avoid expensive reclaim when compaction may not succeed": just admit
   that the allocation failed when you're trying to allocate a huge-page
   and compaction wasn't successful.

 - "allow hugepage fallback to remote nodes when madvised": when that
   node-local huge-page allocation failed, retry without forcing the
   local node.

but by then I judged it too late to replace the fixes for a 5.3 release.
So 5.3 was released with behavior that harked back to the pre-4.18 logic.

But now we're in the merge window for 5.4, and we can see if this
alternate model fixes not just the horrendous swap storm behavior, but
also restores the performance regression that the late reverts caused.

Fingers crossed.

* emailed patches from David Rientjes <rientjes@google.com>:
  mm, page_alloc: allow hugepage fallback to remote nodes when madvised
  mm, page_alloc: avoid expensive reclaim when compaction may not succeed
  Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
  Revert "Revert "mm, thp: restore node-local hugepage allocations""

For systems configured to always try hard to allocate transparent
hugepages (thp defrag setting of "always") or for memory that has been
explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to
remote memory to allocate the hugepage if the local allocation fails
first.

The point is to allow the initial call to __alloc_pages_node() to attempt
to defragment local memory to make a hugepage available, if possible,
rather than immediately fallback to remote memory.  Local hugepages will
always have a better access latency than remote (huge)pages, so an attempt
to make a hugepage available locally is always preferred.

If memory compaction cannot be successful locally, however, it is likely
better to fallback to remote memory.  This could take on two forms: either
allow immediate fallback to remote memory or do per-zone watermark checks.
It would be possible to fallback only when per-zone watermarks fail for
order-0 memory, since that would require local reclaim for all subsequent
faults so remote huge allocation is likely better than thrashing the local
zone for large workloads.

In this case, it is assumed that because the system is configured to try
hard to allocate hugepages or the vma is advised to explicitly want to try
hard for hugepages that remote allocation is better when local allocation
and memory compaction have both failed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memory compaction has a couple significant drawbacks as the allocation
order increases, specifically:

 - isolate_freepages() is responsible for finding free pages to use as
   migration targets and is implemented as a linear scan of memory
   starting at the end of a zone,

 - failing order-0 watermark checks in memory compaction does not account
   for how far below the watermarks the zone actually is: to enable
   migration, there must be *some* free memory available.  Per the above,
   watermarks are not always suffficient if isolate_freepages() cannot
   find the free memory but it could require hundreds of MBs of reclaim to
   even reach this threshold (read: potentially very expensive reclaim with
   no indication compaction can be successful), and

 - if compaction at this order has failed recently so that it does not even
   run as a result of deferred compaction, looping through reclaim can often
   be pointless.

For hugepage allocations, these are quite substantial drawbacks because
these are very high order allocations (order-9 on x86) and falling back to
doing reclaim can potentially be *very* expensive without any indication
that compaction would even be successful.

Reclaim itself is unlikely to free entire pageblocks and certainly no
reliance should be put on it to do so in isolation (recall lumpy reclaim).
This means we should avoid reclaim and simply fail hugepage allocation if
compaction is deferred.

It is also not helpful to thrash a zone by doing excessive reclaim if
compaction may not be able to access that memory.  If order-0 watermarks
fail and the allocation order is sufficiently large, it is likely better
to fail the allocation rather than thrashing the zone.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 92717d42.

Since commit a8282608 ("Revert "mm, thp: restore node-local hugepage
allocations"") is reverted in this series, it is better to restore the
previous 5.2 behavior between the thp allocation and the page allocator
rather than to attempt any consolidation or cleanup for a policy that is
now reverted.  It's less risky during an rc cycle and subsequent patches
in this series further modify the same policy that the pre-5.3 behavior
implements.

Consolidation and cleanup can be done subsequent to a sane default page
allocation strategy, so this patch reverts a cleanup done on a strategy
that is now reverted and thus is the least risky option.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit a8282608.

The commit references the original intended semantic for MADV_HUGEPAGE
which has subsequently taken on three unique purposes:

 - enables or disables thp for a range of memory depending on the system's
   config (is thp "enabled" set to "always" or "madvise"),

 - determines the synchronous compaction behavior for thp allocations at
   fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"),
   and

 - reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only
   clear previous hugepage advice).

These are the three purposes that currently exist in 5.2 and over the
past several years that userspace has been written around.  Adding a
NUMA locality preference adds a fourth dimension to an already conflated
advice mode.

Based on the semantic that MADV_HUGEPAGE has provided over the past
several years, there exist workloads that use the tunable based on these
principles: specifically that the allocation should attempt to
defragment a local node before falling back.  It is agreed that remote
hugepages typically (but not always) have a better access latency than
remote native pages, although on Naples this is at parity for
intersocket.

The revert commit that this patch reverts allows hugepage allocation to
immediately allocate remotely when local memory is fragmented.  This is
contrary to the semantic of MADV_HUGEPAGE over the past several years:
that is, memory compaction should be attempted locally before falling
back.

The performance degradation of remote hugepages over local hugepages on
Rome, for example, is 53.5% increased access latency.  For this reason,
the goal is to revert back to the 5.2 and previous behavior that would
attempt local defragmentation before falling back.  With the patch that
is reverted by this patch, we see performance degradations at the tail
because the allocator happily allocates the remote hugepage rather than
even attempting to make a local hugepage available.

zone_reclaim_mode is not a solution to this problem since it does not
only impact hugepage allocations but rather changes the memory
allocation strategy for *all* page allocations.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Michael Ellerman:
 "An assortment of fixes that were either missed by me, or didn't arrive
  quite in time for the first v5.4 pull.

   - Most notable is a fix for an issue with tlbie (broadcast TLB
     invalidation) on Power9, when using the Radix MMU. The tlbie can
     race with an mtpid (move to PID register, essentially MMU context
     switch) on another thread of the core, which can cause stores to
     continue to go to a page after it's unmapped.

   - A fix in our KVM code to add a missing barrier, the lack of which
     has been observed to cause missed IPIs and subsequently stuck CPUs
     in the host.

   - A change to the way we initialise PCR (Processor Compatibility
     Register) to make it forward compatible with future CPUs.

   - On some older PowerVM systems our H_BLOCK_REMOVE support could
     oops, fix it to detect such systems and fallback to the old
     invalidation method.

   - A fix for an oops seen on some machines when using KASAN on 32-bit.

   - A handful of other minor fixes, and two new selftests.

  Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
  Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
  Roth, Oliver O'Halloran"

* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
  powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
  powerpc/nvdimm: Use HCALL error as the return value
  selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
  powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
  powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
  powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
  powerpc/pseries: Call H_BLOCK_REMOVE when supported
  powerpc/pseries: Read TLB Block Invalidate Characteristics
  KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
  powerpc/mm: Fix an Oops in kasan_mmu_init()
  powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
  powerpc/64s: Set reserved PCR bits
  powerpc: Fix definition of PCR bits to work with old binutils
  powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
  powerpc/tm: Add tm-poison test

Pull x86 fix from Ingo Molnar:
 "A kexec fix for the case when GCC_PLUGIN_STACKLEAK=y is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Disable the stackleak GCC plugin for the purgatory

Pull scheduler fixes from Ingo Molnar:

 - Apply a number of membarrier related fixes and cleanups, which fixes
   a use-after-free race in the membarrier code

 - Introduce proper RCU protection for tasks on the runqueue - to get
   rid of the subtle task_rcu_dereference() interface that was easy to
   get wrong

 - Misc fixes, but also an EAS speedup

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Avoid redundant EAS calculation
  sched/core: Remove double update_max_interval() call on CPU startup
  sched/core: Fix preempt_schedule() interrupt return comment
  sched/fair: Fix -Wunused-but-set-variable warnings
  sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
  sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
  sched/membarrier: Skip IPIs when mm->mm_users == 1
  selftests, sched/membarrier: Add multi-threaded test
  sched/membarrier: Fix p->mm->membarrier_state racy load
  sched/membarrier: Call sync_core only before usermode for same mm
  sched/membarrier: Remove redundant check
  sched/membarrier: Fix private expedited registration check
  tasks, sched/core: RCUify the assignment of rq->curr
  tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
  tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
  tasks: Add a count of task RCU users
  sched/core: Convert vcpu_is_preempted() from macro to an inline function
  sched/fair: Remove unused cfs_rq_clock_task() function

Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull kernel lockdown mode from James Morris:
 "This is the latest iteration of the kernel lockdown patchset, from
  Matthew Garrett, David Howells and others.

  From the original description:

    This patchset introduces an optional kernel lockdown feature,
    intended to strengthen the boundary between UID 0 and the kernel.
    When enabled, various pieces of kernel functionality are restricted.
    Applications that rely on low-level access to either hardware or the
    kernel may cease working as a result - therefore this should not be
    enabled without appropriate evaluation beforehand.

    The majority of mainstream distributions have been carrying variants
    of this patchset for many years now, so there's value in providing a
    doesn't meet every distribution requirement, but gets us much closer
    to not requiring external patches.

  There are two major changes since this was last proposed for mainline:

   - Separating lockdown from EFI secure boot. Background discussion is
     covered here: https://lwn.net/Articles/751061/

   -  Implementation as an LSM, with a default stackable lockdown LSM
      module. This allows the lockdown feature to be policy-driven,
      rather than encoding an implicit policy within the mechanism.

  The new locked_down LSM hook is provided to allow LSMs to make a
  policy decision around whether kernel functionality that would allow
  tampering with or examining the runtime state of the kernel should be
  permitted.

  The included lockdown LSM provides an implementation with a simple
  policy intended for general purpose use. This policy provides a coarse
  level of granularity, controllable via the kernel command line:

    lockdown={integrity|confidentiality}

  Enable the kernel lockdown feature. If set to integrity, kernel features
  that allow userland to modify the running kernel are disabled. If set to
  confidentiality, kernel features that allow userland to extract
  confidential information from the kernel are also disabled.

  This may also be controlled via /sys/kernel/security/lockdown and
  overriden by kernel configuration.

  New or existing LSMs may implement finer-grained controls of the
  lockdown features. Refer to the lockdown_reason documentation in
  include/linux/security.h for details.

  The lockdown feature has had signficant design feedback and review
  across many subsystems. This code has been in linux-next for some
  weeks, with a few fixes applied along the way.

  Stephen Rothwell noted that commit 9d1f8be5 ("bpf: Restrict bpf
  when kernel lockdown is in confidentiality mode") is missing a
  Signed-off-by from its author. Matthew responded that he is providing
  this under category (c) of the DCO"

* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
  kexec: Fix file verification on S390
  security: constify some arrays in lockdown LSM
  lockdown: Print current->comm in restriction messages
  efi: Restrict efivar_ssdt_load when the kernel is locked down
  tracefs: Restrict tracefs when the kernel is locked down
  debugfs: Restrict debugfs when the kernel is locked down
  kexec: Allow kexec_file() with appropriate IMA policy when locked down
  lockdown: Lock down perf when in confidentiality mode
  bpf: Restrict bpf when kernel lockdown is in confidentiality mode
  lockdown: Lock down tracing and perf kprobes when in confidentiality mode
  lockdown: Lock down /proc/kcore
  x86/mmiotrace: Lock down the testmmiotrace module
  lockdown: Lock down module params that specify hardware parameters (eg. ioport)
  lockdown: Lock down TIOCSSERIAL
  lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
  acpi: Disable ACPI table override if the kernel is locked down
  acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
  ACPI: Limit access to custom_method when the kernel is locked down
  x86/msr: Restrict MSR access when the kernel is locked down
  x86: Lock down IO port access when the kernel is locked down
  ...

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "The major feature in this time is IMA support for measuring and
  appraising appended file signatures. In addition are a couple of bug
  fixes and code cleanup to use struct_size().

  In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
  image may be signed with an appended signature, using the same
  scripts/sign-file tool that is used to sign kernel modules.

  Similarly, the initramfs may contain an appended signature.

  This contained a lot of refactoring of the existing appended signature
  verification code, so that IMA could retain the existing framework of
  calculating the file hash once, storing it in the IMA measurement list
  and extending the TPM, verifying the file's integrity based on a file
  hash or signature (eg. xattrs), and adding an audit record containing
  the file hash, all based on policy. (The IMA support for appended
  signatures patch set was posted and reviewed 11 times.)

  The support for appended signature paves the way for adding other
  signature verification methods, such as fs-verity, based on a single
  system-wide policy. The file hash used for verifying the signature and
  the signature, itself, can be included in the IMA measurement list"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: ima_api: Use struct_size() in kzalloc()
  ima: use struct_size() in kzalloc()
  sefltest/ima: support appended signatures (modsig)
  ima: Fix use after free in ima_read_modsig()
  MODSIGN: make new include file self contained
  ima: fix freeing ongoing ahash_request
  ima: always return negative code for error
  ima: Store the measurement again when appraising a modsig
  ima: Define ima-modsig template
  ima: Collect modsig
  ima: Implement support for module-style appended signatures
  ima: Factor xattr_verify() out of ima_appraise_measurement()
  ima: Add modsig appraise_type option for module-style appended signatures
  integrity: Select CONFIG_KEYS instead of depending on it
  PKCS#7: Introduce pkcs7_get_digest()
  PKCS#7: Refactor verify_pkcs7_signature()
  MODSIGN: Export module signature definitions
  ima: initialize the "template" field with the default template