- 23 Mar, 2015 19 commits
-
-
Eric Dumazet authored
dccp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
dccp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New dccp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by:
-
Eric Dumazet authored
tcp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by:
-
Eric Dumazet authored
tcp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New tcp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by:
-
Eric Dumazet authored
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually. We hold syn_wait_lock for such small sections, that it makes no sense to use a read/write lock. A spin lock is simply faster. Signed-off-by:
-
Eric Dumazet authored
listener can be source of false sharing. request sock has some useful information like : ireq->ir_iif, ireq->ir_num, ireq->ireq_net This patch does not solve the major problem of having to read sk->sk_protocol which is sharing a cache line with sk->sk_wmem_alloc. (This same field is read later in ip_build_and_send_pkt()) One idea would be to move sk_protocol close to sk_family (using 8 bits instead of 16 for sk_family seems enough) Signed-off-by:
-
Eric Dumazet authored
It is not needed, and req->sk_listener points to the listener anyway. request_sock argument can be const. Signed-off-by:
-
Eric Dumazet authored
Cache listen_sock_qlen() to limit false sharing, and read rskq_defer_accept once as it might change under us. Signed-off-by:
-
David S. Miller authored
Tilman Schmidt says: ==================== isdn/gigaset: restructure modem response parser This series of patches restructures the Gigaset ISDN driver's modem response parser to improve code readability and conform better to the device's specification and actual behaviour. Could you please merge these through net-next? ==================== Signed-off-by: -
Tilman Schmidt authored
Restructure the control structure of the modem response parser to improve readability and error handling. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
Separate CID detection from main parser loop. Signed-off-by:
-
Tilman Schmidt authored
Separate literal string handling from main parser loop. Signed-off-by:
-
Tilman Schmidt authored
Factor out queueing of modem response events into helper function add_cid_event(). Signed-off-by:
-
Roopa Prabhu authored
make it same as the netdev_switch_port_bridge_setlink/dellink api (ie traverse lowerdevs to get to the switch port). removes "WARN_ON(!ops->ndo_switch_parent_id_get)" because direct bridge ports can be stacked netdevices (like bonds and team of switch ports) which may not implement this ndo. v2 to v3: - remove changes to bond and team. Bring back the transparently following lowerdevs like i initially had for setlink/getlink (http://www.spinics.net/lists/netdev/msg313436.html) dave and scott feldman also seem to prefer it be that way and move to non-transparent way of doing things if we see a problem down the lane. v3 to v4: - fix ret initialization v4 to v5: - return err on first failure (scott feldman) v5 to v6: - change variable name (err) and initialize to -EOPNOTSUPP (scott feldman). Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
WANG Cong authored
skb->priority can be set for two purposes: 1) With respect to IP TOS field, which is computed by a mask. Ususally used for priority qdisc's (pfifo, prio etc.), on TX side (we only have ingress qdisc on RX side). 2) Used as a classid or flowid, works in the same way with tc classid. What's more, this can even override the classid of tc filters. For case 1), it has been respected within its netns, I don't see any point of keeping it for another netns, especially when packets will be forwarded to Rx path (no matter from TX path or RX path). For case 2) we care, our applications run inside a netns, and we classify the packets by our own filters outside, If some application sets this priority, it could bypass our filters, therefore clear it when moving out of a netns, it makes no sense to bypass tc filters out of its netns. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Tadeusz Struk says: ==================== Add support for async socket operations After the iocb parameter has been removed from sendmsg() and recvmsg() ops the socket layer, and the network stack no longer support async operations. This patch set adds support for asynchronous operations on sockets back. Changes in v3: * As sugested by Al Viro instead of adding new functions aio_sendmsg and aio_recvmsg, added a ptr to iocb into the kernel-side msghdr structure. This way no change to aio.c is required. Changes in v2: * removed redundant total_size param from aio_sendmsg and aio_recvmsg functions ==================== Signed-off-by: -
Tadeusz Struk authored
The way the algif_skcipher works currently is that on sendmsg/sendpage it builds an sgl for the input data and then on read/recvmsg it sends the job for encryption putting the user to sleep till the data is processed. This way it can only handle one job at a given time. This patch changes it to be asynchronous by adding AIO support. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Tadeusz Struk authored
Allow to link af_alg sgls. Signed-off-by:
-
tadeusz.struk@intel.com authored
Add support for async operations. Signed-off-by:
-
- 21 Mar, 2015 20 commits
-
-
Herbert Xu authored
Instead of computing the offset from trailer, this patch computes netlink_compare_arg_len from the offset of portid and then adds 4 to it. This allows trailer to be removed. Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Murali Karicheri says: ==================== NetCP: Add support for version 1.5 NetCP 1.5 is used in newer K2 SoCs from Texas Instruments such as K2E, K2L etc. This patch series add support for Ethss driver for this version of NetCP. While at it, fix couple of bugs in the original driver. One of the earlier patch "net: netcp: select davinci_mdio driver by default" is folded onto this series. Please review and let me know your comments. ==================== Signed-off-by: -
WingMan Kwok authored
NetCP 1.5 available on newer K2 SoCs such as K2E and K2L introduced 3 variants of the ethss subsystem, 9 port, 5 port and 2 port. These have one host port towards the CPU and N external slave ports. To customize the driver for these new ethss sub systems, multiple compatibility strings are introduced. Currently some of parameters that are different on different variants such as number of ALE ports, stats modules and number of ports are defined through constants. These are now changed to variables in gbe_priv data that get set based on the compatibility string. This is required as there are no hardware identification registers available to distinguish among the variants of NetCP 1.5 ethss. However there is identification register available to differentiate between NetCP 1.4 vs NetCP 1.5 and the same is made use of in the code to differentiate them. For more reading on the details of this peripheral, please refer to the User Guide available at http://www.ti.com/lit/pdf/spruhz3Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Karicheri, Muralidharan authored
Fix following checkpatch error. It seems to have passed checkpatch last time when original code was introduced. ERROR: Macros with complex values should be enclosed in parentheses #172: FILE: drivers/net/ethernet/ti/netcp_ethss.c:869: Signed-off-by:
-
Karicheri, Muralidharan authored
Keystone netcp driver re-uses davinci mdio driver. So enable it by default for keystone netcp driver. Signed-off-by:
-
Karicheri, Muralidharan authored
Ethss has multiple modules within the sub system - switch sub system - sgmii - mdio - switch module NetCP driver re-uses existing davinci mdio driver. It requires to have its own register region to map the reg space. So restructure the code to use separate reg region for the individual modules it manages. Use range property to define register space of NetCP and use reg property to define individual reg spaces. So MDIO will have its own reg space to map. This is a pre-requisite to enable MDIO driver for NetCP. Signed-off-by:
-
Karicheri, Muralidharan authored
10G switch requires forward port number in the taginfo field, where as it should be in packet_info field for necp 1.4 Ethss. So fill this value correctly in the knav dma descriptor. Also rename dma_psflags field in struct netcp_tx_pipe to switch_to_port as it contain no flag, but the switch port number for forwarding the packet. Add a flag to hold the new flag, SWITCH_TO_PORT_IN_TAGINFO which will be set for 10G. This can also used in the future for other flags for the tx_pipe. Signed-off-by:
-
YOSHIFUJI Hideaki/吉藤英明 authored
Signed-off-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
-
YOSHIFUJI Hideaki/吉藤英明 authored
net: neighbour: Add mcast_resolicit to configure the number of multicast resolicitations in PROBE state. We send unicast neighbor (ARP or NDP) solicitations ucast_probes times in PROBE state. Zhu Yanjun reported that some implementation does not reply against them and the entry will become FAILED, which is undesirable. We had been dealt with such nodes by sending multicast probes mcast_ solicit times after unicast probes in PROBE state. In 2003, I made a change not to send them to improve compatibility with IPv6 NDP. Let's introduce per-protocol per-interface sysctl knob "mcast_ reprobe" to configure the number of multicast (re)solicitation for reconfirmation in PROBE state. The default is 0, since we have been doing so for 10+ years. Reported-by:
Zhu Yanjun <Yanjun.Zhu@windriver.com> CC: Ulf Samuelsson <ulf.samuelsson@ericsson.com> Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Rafał Miłecki authored
Home routers based on ARM SoCs like BCM4708 also have bcma bus with core supported by bgmac. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
On ARM SoCs with bgmac Ethernet hardware we don't have any normal PHY. There is always a switch attached but it's not even controlled over MDIO like in case of MIPS devices. We need a fixed PHY to be able to send/receive packets from the switch. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-20 This series contains updates to ixgb, e1000e, igb and igbvf. Eliezer and Todd provide patches to fix a potential issue found during code inspection. When bringing down an interface netif_carrier_off() should be one of the first things we do, since this will prevent the stack from queueing more packets to this interface. Yanir provides a fix for e1000e that was found in validating i219, where the call to e1000e_write_protect_nvm_ich8lan() is no longer supported in newer hardware. Access to these registers causes a system freeze in early steppings and is ignored in later steppings. ==================== Signed-off-by: -
Mathieu Olivari authored
Change bd76a116 made all DSA drivers depend on NET_DSA rather than selecting them. However, as the only way to select this option was to actually select a driver, it made DSA impossible to enable at all. This patch adds an explicit entry which the user will have to enable prior selecting a driver. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by:
-
Scott Feldman authored
Suggested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eric Dumazet authored
This reverts commit ca10b9e9. No longer needed after commit eb8895de ("tcp: tcp_make_synack() should use sock_wmalloc") When under SYNFLOOD, we build lot of SYNACK and hit false sharing because of multiple modifications done on sk_listener->sk_wmem_alloc Since tcp_make_synack() uses sock_wmalloc(), there is no need to call skb_set_owner_w() again, as this adds two atomic operations. Signed-off-by:
-
Todd Fujinaka authored
Use netif_carrier_off() first, since that will prevent the stack from queuing more packets to this IF. This operation is fast, and should behave much nicer when trying to bring down an interface under load. Reported-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Todd Fujinaka authored
Use netif_carrier_off() first, since that will prevent the stack from queuing more packets to this IF. This operation is fast, and should behave much nicer when trying to bring down an interface under load. Reported-by:
-
Yanir Lubetkin authored
The call to e1000e_write_protect_nvm_ich8lan() is no longer supported by HW. Access to these registers causes a system freeze in A step hardware and is ignored in B step hardware. This function must not be called in hardware newer than LPT. Signed-off-by:
Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Eliezer Tamir authored
When bringing down an interface netif_carrier_off() should be one the first things we do, since this will prevent the stack from queuing more packets to this interface. This operation is very fast, and should make the device behave much nicer when trying to bring down an interface under load. Also, this would Do The Right Thing (TM) if this device has some sort of fail-over teaming and redirect traffic to the other IF. Move netif_carrier_off as early as possible. Signed-off-by:
-
Eliezer Tamir authored
When bringing down an interface netif_carrier_off() should be one the first things we do, since this will prevent the stack from queuing more packets to this interface. This operation is very fast, and should make the device behave much nicer when trying to bring down an interface under load. Also, this would Do The Right Thing (TM) if this device has some sort of fail-over teaming and redirect traffic to the other IF. Move netif_carrier_off as early as possible. Signed-off-by:
-
- 20 Mar, 2015 1 commit
-
-
David S. Miller authored
Daniel Borkmann says: ==================== This set adds native eBPF support also to act_bpf and thus covers tc with eBPF in the classifier *and* action part. A link to iproute2 preview has been provided in patch 2 and the code will be pushed out after Stephen has processed the classifier part and helper bits for tc. This set depends on ced585c8 ("act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome"), so a net into net-next merge would be required first. Hope that's fine by you, Dave. ;) ==================== Signed-off-by:
-
