- 22 Feb, 2019 34 commits
-
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have, of note: * the massive patch series for multi-BSSID support, I ended up applying that through a side branch to record some details * CSA improvements * HE (802.11ax) updates to Draft 3.3 * strongly typed element iteration/etc. to make such code more readable - this came up in particular in multi-BSSID * rhashtable conversion patches from Herbert Along, as usual, with various fixes and improvements. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: VLAN devices w/ filtering This patch series supports having VLAN devices on top of DSA/switch ports while the switch has VLAN filtering globally turned on (as is the case with Broadcom switches). Whether the switch does global or per-port VLAN filtering, having VLAN entries for these VLAN devices is beneficial. We take care of a few possibly problematic cases: - adding a VLAN device while there is an existing VLAN entry created by a VLAN aware bridge. The entire bridge's VLAN database and not just the specific bridge port is being checked to be safe and conserative - adding a bridge VLAN entry when there is an existing VLAN device created is also not possible because that would lead to the bridge being able to manipulate the VLAN device's VID/attributes under its feet - enslaving a VLAN device into a VLAN aware bridge since that duplicates functionality already offered by the VLAN aware bridge Here are the different test cases that were run to exercise this: ip addr flush dev gphy ip link add dev br0 type bridge echo 1 > /sys/class/net/br0/bridge/vlan_filtering ip link set dev gphy master br0 udhcpc -i br0 vconfig add rgmii_1 100 ifconfig rgmii_1.100 192.168.100.10 ping -c 2 192.168.100.1 vconfig add br0 42 bridge vlan add vid 42 dev gphy bridge vlan add vid 42 dev br0 self ifconfig br0.42 192.168.42.2 ping -c 2 192.168.42.1 ip link del rgmii_1.100 vconfig add rgmii_1 100 ifconfig rgmii_1.100 192.168.100.10 ping -c 2 192.168.100.1 echo 0 > /sys/class/net/br0/bridge/vlan_filtering ping -c 2 192.168.100.1 ip link del rgmii_1.100 echo 1 > /sys/class/net/br0/bridge/vlan_filtering vconfig add rgmii_1 100 brctl addif br0 rgmii_1 bridge vlan add vid 100 dev rgmii_1 vconfig rem rgmii_1.100 bridge vlan add vid 100 dev rgmii_1 vconfig add rgmii_1 100 bridge vlan del vid 100 dev rgmii_1 vconfig add rgmii_1 100 brctl addif br0 rgmii_1.100 ==================== Signed-off-by: -
Florian Fainelli authored
In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_wildmat’: drivers/isdn/i4l/isdn_common.c:173:5: warning: this statement may fall through [-Wimplicit-fallthrough=] p++; ~^~ drivers/isdn/i4l/isdn_common.c:174:3: note: here default: ^~~~~~~ CC [M] drivers/leds/leds-lp8788.o CC [M] drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/smu10_smumgr.o drivers/isdn/i4l/isdn_common.c: In function ‘isdn_status_callback’: drivers/isdn/i4l/isdn_common.c:729:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (divert_if) ^ drivers/isdn/i4l/isdn_common.c:732:2: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Andrew Lunn authored
Use the new PHY driver call to get the PHYs supported features. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: removed new config_init callback from patch] Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Herbert Xu authored
The rhashtable_walk_init function has been obsolete for more than two years. This patch finally converts its last users over to rhashtable_walk_enter and removes it. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Herbert Xu authored
The code in mesh_path_add tries to handle the case where a duplicate entry is added to the rhashtable by doing a lookup after a failed insertion. It also tries to handle races by repeating the insertion should the lookup fail. This is now unnecessary as we have rhashtable API functions that can directly return the mathcing object. Signed-off-by:
-
Johannes Berg authored
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: -
Liad Kaufman authored
Update element names and new fields according to D3.3 of the HE spec. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
Sometimes, we may want to transport higher bandwidth data through vendor events, and in that case sending it multicast is a bad idea. Allow vendor events to be unicast. Signed-off-by: -
Sara Sharon authored
Some buggy APs keep the CSA IE in probes after the channel switch was completed and can silence us for no good reason. Apply quiet mode only from beacons. If there is real channel switch going on, we will see the beacon anyway. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
Currently, due to some buggy APs that continue to include CSA IEs after the switch, we ignore CSA to same channel. However, some other APs may do CSA to self in order to have immediate quiet. Allow it. Do it only for beacons. Signed-off-by:
-
Sara Sharon authored
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by:
-
Liad Kaufman authored
The ieee80211_vendor_radiotap was read from the beginning of the skb->data regardless of the existence of other elements in radiotap that would cause it to move to another position. Fix this by taking into account where it really should be. Signed-off-by:
-
Johannes Berg authored
This type was defined in radiotap but we didn't add it to the header file, add it now. Signed-off-by: -
Sara Sharon authored
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by:
-
Sara Sharon authored
2018 REVmd of the spec introduces the max channel switch time element which is optionally included in beacons/probes when there is a channel switch / extended channel switch element. The value represents the maximum delay between the time the AP transmitted the last beacon in current channel and the expected time of the first beacon in the new channel, in TU. Parse the value and pass it to the driver. Signed-off-by:
-
Jouni Malinen authored
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by:
Jouni Malinen <jouni@codeaurora.org> Signed-off-by:
-
Mao Wenan authored
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Florian Fainelli authored
A missing break keyword should have been added after adding support for PRE_BRIDGE_FLAGS. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 93700458 ("rocker: Check Handle PORT_PRE_BRIDGE_FLAGS") Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver. ==================== Signed-off-by: -
Huazhong Tan authored
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Huazhong Tan authored
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by:
-
liuzhongzhu authored
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
-
liuzhongzhu authored
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by:
-
Weihang Li authored
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
-
Weihang Li authored
These bits are enabled now and have been test. Signed-off-by:
-
Weihang Li authored
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b3 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by:
-
Weihang Li authored
This patch add information of specific bit in log to be consistent with other type of errors, so that we can know which memory of ssu has occurred a ecc ras errors. Signed-off-by:
-
Jian Shen authored
In original codes, for copper port which doesn't connect to phy, it always returns -EOPNOTSUPP when query port information. This patch fixes it by return the port information of MAC. Fixes: 5f373b15 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
The link mode with bits has been up to more than 31 for some MAC and phy. Convert to using a linkmode bitmap, which can support all link modes. Signed-off-by:
-
Yonglong Liu authored
In hnae3_register_ae_dev(), ae_algo->ops is assigned to ae_dev->ops before check that ae_algo->ops is valid. And in hnae3_register_ae_algo(), missing check for ae_algo->ops. This patch fixes them. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Yonglong Liu authored
These functions are exported, add pointer checking at the beginning can make them more safe. Signed-off-by:
-
- 21 Feb, 2019 6 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Support for shared buffers in Spectrum-2 Petr says: Spectrum-2 will be configured with a different set of pools than Spectrum-1, their sizes will be larger, and the individual quotas will be different as well. It is therefore necessary to make the shared buffer module aware of this dependence on chip type, and adjust the individual tables. In patch #1, introduce a structure for keeping per-chip immutable and default values. In patch #2, structures for keeping current values of SBPM and SBPR (pool configuration and port-pool quota) are allocated dynamically to support varying pool counts. In patches #3 to #7, uses of individual shared buffer configuration tables are migrated from global definitions to fields in struct mlxsw_sp_sb_vals, which was introduced above. Up until this point, the actual configuration is still the one suitable for Spectrum-1. In patch #8 Spectrum-2 configuration is added. In patch #9, port headroom configuration is changed to take into account current recommended value for a 100-Gbps port, and the split factor. In patch #10, requests for overlarge headroom are rejected. This avoids potential chip freeze should such overlarge requests be made. ==================== Signed-off-by: -
Petr Machata authored
cap_max_headroom_size holds maximum headroom size supported. Overstepping that limit might under certain conditions lead to ASIC freeze. Query and store the value, and add mlxsw_sp_sb_max_headroom_cells() for obtaining the stored value. In __mlxsw_sp_port_headroom_set(), reject requests where the total port buffer is larger than the advertised maximum. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
The recommendation for headroom size for 100Gbps port and 100m cable is 101.6KB, reduced accordingly for split ports. The closest higher number evenly divisible by cell size for both Spectrum-1 and Spectrum-2, and such that the number of cells can be further divided by maximum split factor of 4, is 102528 bytes, or 25632 bytes per lane. Update mlxsw_sp_port_pb_init() to compute the headroom taking into account this recommended per-lane value and number of lanes actually dedicated to a given port. Signed-off-by:
-
Petr Machata authored
Customize the tables related to shared buffer configuration to match the current recommendation for Spectrum-2 systems. Signed-off-by:
-
Petr Machata authored
The SBMM register configures the shared buffer quota for MC packets according to Switch-Priority. The default configuration depends on the chip type. Therefore keep the table and length in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by:
-
Petr Machata authored
The SBCM register configures shared buffer quota according to port-priority resp. port-TC. The default configuration depends on the chip type. Therefore keep the tables and their lengths in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by:
-
