Signed-off-by: Len Brown <len.brown@intel.com>

This fixes the reported family on modern AMD processors (e.g. Ryzen,
which is family 0x17). Previously these processors all showed up as
family 0xf.

See the document
https://support.amd.com/TechDocs/56255_OSRR.pdf
section CPUID_Fn00000001_EAX for how to calculate the family
from the BaseFamily and ExtFamily values.

This matches the code in arch/x86/lib/cpu.c
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>

turbostat fails on some multi-package topologies because the logical node
enumeration assumes that the nodes are sequentially numbered,
which causes the logical numa nodes to not be enumerated, or enumerated incorrectly.

Use a more robust enumeration algorithm which allows for non-seqential physical nodes.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

A recently added x2apic debug message was hard-coded to stderr.
That doesn't work with "-o outfile".
Signed-off-by: Len Brown <len.brown@intel.com>

This patch fixes a regression introduced in

commit 8cb48b32 ("tools/power turbostat: track thread ID in cpu_topology")

Turbostat uses incorrect cores number ('topo.num_cores') - its value is count
of logical CPUs, instead of count of physical cores. So it is twice as large as
it should be on a typical Intel system. For example, on a 6 core Xeon system
'topo.num_cores' is 12, and on a 52 core Xeon system 'topo.num_cores' is 104.

And interestingly, on a 68-core Knights Landing Intel system 'topo.num_cores'
is 272, because this system has 4 logical CPUs per core.

As a result, some of the turbostat calculations are incorrect. For example,
on idle 52-core Xeon system when all cores are ~99% in Core C6 (CPU%c6), the
summary (very first) line shows ~48% Core C6, while it should be ~99%.

This patch fixes the problem by fixing 'topo.num_cores' calculation.

Was:

1. Init 'thread_id' for all CPUs to -1
2. Run 'get_thread_siblings()' which sets it to 0 or 1
3. Increment 'topo.num_cores' when thread_id != -1 (bug!)

Now:

1. Init 'thread_id' for all CPUs to -1
2. Run 'get_thread_siblings()' which sets it to 0 or 1
3. Increment 'topo.num_cores' when thread_id is not 0

I did not have a chance to test this on an AMD machine, and only tested on a
couple of Intel Xeons (6 and 52 cores).
Reported-by: Vladislav Govtva <vladislav.govtva@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The -S (system summary) option failed to print any data on a 1-processor system.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Explain that this column may increment for some throttling causes,
and may not increment for others.
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

Document the missing command line tokens in the help() function.
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Improve the help() output by adding the single character
tokens (e.g -a).
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Sort the command line arguments output of help() in
alphabetical order in line with other linux tools.
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Running turbostat on machines that don't expose nodes
in sysfs (no /sys/bus/node) causes a segfault or a -nan
value diesplayed in the log. This is caused by
physical_node_id being reported as -1 and logical_node_id
being calculated as a negative number resulting in the new
GET_THREAD/GET_CORE returning an incorrect address.
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Add APIC and X2APIC columns to the topology section.

They are disabled-by-default -- enable like so:
--debug
or
--enable APIC,X2APIC
Signed-off-by: Len Brown <len.brown@intel.com>

eg. the "HT" here:
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
Signed-off-by: Len Brown <len.brown@intel.com>

The --show and --hide options failed on "Node", which was listed as "Node%".
The --show and --hide options were generally fouled-up do due to come
content merges that scrambled the list of column name indexes.
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

Output a Node column if there is more than one node/socket.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The previous patches have added node information to turbostat, but the
counters code does not take it into account.

Add node information from cpu_topology calculations to turbostat
counters.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Cleanup, remove num_ from num_nodes_per_pkg, num_cores_per_node, and
num_threads_per_node.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

turbostat incorrectly assumes that there is one node per package.  As a
result num_cores_per_pkg is not correctly named and is actually
num_cores_per_node.

Rename num_cores_per_pkg to num_cores_per_node.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The code can be simplified if the cpu_topology *cpus tracks the thread
IDs.  This removes an additional file lookup and simplifies the counter
initialization code.

Add thread ID to cpu_topology information and cleanup the counter
initialization code.

v2: prevent thread_id from being overwritten
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The code currently assumes each package has exactly one node.  This is not
the case for AMD systems and Intel systems with COD.  AMD systems also
may re-enumerate each node's core IDs starting at 0 (for example, an AMD
processor may have two nodes, each with core IDs from 0 to 7).  In order
to properly enumerate the cores we need to track both the physical and
logical node IDs.

Add physical_node_id to track the node ID assigned by the kernel, and
logical_node_id used by turbostat to track the nodes per package ie) a
0-based count within the package.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The turbostat code only looks at thread_siblings_list to determine if
processing units/threads are on the same the core.  This works well on
Intel systems which have a shared L1 instruction and data cache.  This
does not work on AMD systems which have shared L1 instruction cache but
separate L1 data caches.  Other utilities also check sibling's core ID
to determine if the processing unit shares the same core.

Additionally, the cpu_topology *cpus list used in topology_probe() can
be used elsewhere in the code to simplify things.

Export *cpus to the entire turbostat code, and add Processing Unit/Thread
IDs information to each cpu_topology struct.  Confirm that the thread
is on the same core as indicated by thread_siblings_list.

[v2]: Fixup CPU_* usage that caused gcc malloc error.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Future fixes will use sysfs files that contain cpumask output.  The code
needs to know the length of the cpumask in order to determine which cpus
are set in a cpumask.  Currently topo.max_cpu_num is the maximum cpu
number.  It can be increased the the maximum value of cpus represented in
cpumasks.

Set max_num_cpus to the length of a cpumask.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

There's a use case during test to only print specific round of iterations
if --num_iterations is specified, for example, with this patch applied:

turbostat -i 5 -n 4
will capture 4 samples with 5 seconds interval.

[lenb: renamed to --num_iterations from --iterations]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

All MSRs related to turbostat are same as Kabylake.
Even though SDM claims that core C3 residency can be read from MSR 0x662,
the read on this MSR fails on CNL platform. Hence disabled C3 MSR read
and display.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once
it was copied into msr-index.h.  One copy of the truth is better --
particularly when Matt needs to fix it:-)
Signed-off-by: Len Brown <len.brown@intel.com>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added in the
initial turbostat commit. The reversed definitions were presumably
copied from turbostat.c to this file.

Fixes: 9c63a650 ("tools/power/x86/turbostat: share kernel MSR #defines")
Signed-off-by: Matt Turner <mattst88@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added.

Fixes: 889facbe ("tools/power turbostat: v3.0: monitor Watts and Temperature")
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Like the "C1" and "C1%" column, the new POLL and POLL% columns
show invocations and residency% during the measurement interval.

While it didn't seem important to track in the past,
we've recently found some Linux cpuidle bugs related to POLL%.
Signed-off-by: Len Brown <len.brown@intel.com>

The column header for PC10 residency is "Pk%pc10"
This is missing the 'g' that others have, eg Pkg%pc6,
to allow tab-delimited columns to fit into 8-columns.

However, --hide Pk%pc10 did not work, it was still looking for the 'g'.
This was confusing, because --list shows the correct "Pk%pc10"
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Linux 4.15 exports the ACPI Low Power Idle Table's
counters in /sys/devices/system/cpu/cpuidle/

low_power_idle_cpu_residency_us

	Show this in the "CPU%LPI" column.

	Today this reflects the "North Complex"
	residency in PC10, so expect it to
	closely follow "Pk%pc10".

low_power_idle_system_residency_us

	Show this in the "SYS%LPI" column.

	Today, this reflects the North is in PC10,
	plus the PCH is sufficiently quiescent
	to save additional power via the "S0ix"
	system state, as measured by the
	PCH SLP_S0 counter.
Signed-off-by: Len Brown <len.brown@intel.com>

rpm-lint flagged these as being executable:

kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/turbostat.8.gz
kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/x86_energy_perf_policy.8.gz

Fix this
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

When the user reuests to collect and show columns
that are not present on every row (eg. for every CPU)
turbostat still prints an (empty) line for every CPU.
Update so no blank lines are printed.

old:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12

	Pkg%pc6
	9.12
	9.12

new:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12
	Pkg%pc6
	9.12
	9.12
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Improve readability a little bit by changing this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off)

with this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off)
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

BDX and SKX have a bit that tells them to PROMOTE shallow
C-states requests to MWAIT(C6).  It is generally a BIOS bug
if this bit is set.  As we have encountered that BIOS bug,
let's print this bit in turbostat debug output.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Some SKX use a 24 MHz crystal, so do not hard code 25 MHz.

Also, SKX crystal is not exact, because SKX uses an EMI reduction
circuit that costs a fraction of a percent.
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

MSR_IA32_MISC_ENABLE[18] is the MWAIT ENABLE bit, not DISABLE bit...

so

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)

should print as:

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
Signed-off-by: Len Brown <len.brown@intel.com>

The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.

The problem is also easy to reproduce like this:

echo | turbostat

The reason is that we cannot assume that stdin is always a TTY. It can be many
things.

This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.

While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>