- 21 Apr, 2015 8 commits
-
-
LEROY Christophe authored
This patch adds a helper function for reads and writes of the len param of the talitos descriptor. This will help implement SEC1 later. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
LEROY Christophe authored
map_single_talitos_ptr() is always called with extent == 0, so lets remove this unused parameter Signed-off-by:
-
LEROY Christophe authored
j_extent field is specific to SEC2 so we add a helper function to clear it so that SEC1 can redefine that function as nop Signed-off-by:
-
LEROY Christophe authored
Linux CodyingStyle recommends to use short variables for local variables. ptr is just good enough for those 3 lines functions. It helps keep single lines shorter than 80 characters. Signed-off-by:
-
LEROY Christophe authored
This patch refactors the handling of the input and output data that is quite similar in several functions Signed-off-by:
-
LEROY Christophe authored
Do use zero_entry value to init the descriptors ptrs to zero instead of writing 0 in each field Signed-off-by:
-
Stephan Mueller authored
The buffer uses for temporary data must be cleared entirely. In AES192 the used buffer is drbg_statelen(drbg) + drbg_blocklen(drbg) as documented in the comment above drbg_ctr_df. This patch ensures that the temp buffer is completely wiped. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Colin Ian King authored
backlog is not initialised so in the case where cpg->eng_st != ENGINE_IDLE it is never initialised and hence which could lead to an illegal memory dereference in the statement: backlog->complete(backlog, -EINPROGRESS); Discovered with cppcheck static analsys: [drivers/crypto/mv_cesa.c:616]: (error) Uninitialized variable: backlog Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 16 Apr, 2015 1 commit
-
-
Herbert Xu authored
Commit 9c521a20 ("crypto: api - remove instance when test failed") tried to grab a module reference count before the module was even set. Worse, it then goes on to free the module reference count after it is set so you quickly end up with a negative module reference count which prevents people from using any instances belonging to that module. This patch moves the module initialisation before the reference count. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 15 Apr, 2015 31 commits
-
-
Linus Torvalds authored
Merge second patchbomb from Andrew Morton: - the rest of MM - various misc bits - add ability to run /sbin/reboot at reboot time - printk/vsprintf changes - fiddle with seq_printf() return value * akpm: (114 commits) parisc: remove use of seq_printf return value lru_cache: remove use of seq_printf return value tracing: remove use of seq_printf return value cgroup: remove use of seq_printf return value proc: remove use of seq_printf return value s390: remove use of seq_printf return value cris fasttimer: remove use of seq_printf return value cris: remove use of seq_printf return value openrisc: remove use of seq_printf return value ARM: plat-pxa: remove use of seq_printf return value nios2: cpuinfo: remove use of seq_printf return value microblaze: mb: remove use of seq_printf return value ipc: remove use of seq_printf return value rtc: remove use of seq_printf return value power: wakeup: remove use of seq_printf return value x86: mtrr: if: remove use of seq_printf return value linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK MAINTAINERS: CREDITS: remove Stefano Brivio from B43 .mailmap: add Ricardo Ribalda CREDITS: add Ricardo Ribalda Delgado ... -
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Joe Perches <joe@perches.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Remove unused return value from trace_lookup_stack Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Coalesce formats, realign arguments Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, (as it is here, it doesn't return # of chars emitted) will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Rasmus Villemoes authored
The macro BITMAP_LAST_WORD_MASK can be implemented without a conditional, which will generally lead to slightly better generated code (221 bytes saved for allmodconfig-GCOV_KERNEL, ~2k with GCOV_KERNEL). As a small bonus, this also ensures that the nbits parameter is expanded exactly once. In BITMAP_FIRST_WORD_MASK, if start is signed gcc is technically allowed to assume it is positive (or divisible by BITS_PER_LONG), and hence just do the simple mask. It doesn't seem to use this, and even on an architecture like x86 where the shift only depends on the lower 5 or 6 bits, and these bits are not affected by the signedness of the expression, gcc still generates code to compute the C99 mandated value of start % BITS_PER_LONG. So just use a mask explicitly, also for consistency with BITMAP_LAST_WORD_MASK. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Tejun Heo <tj@kernel.org> Reviewed-by:
George Spelvin <linux@horizon.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by:
-
Joe Perches authored
This email address isn't working anymore Signed-off-by:
-
Ricardo Ribalda Delgado authored
Work and Home computer had different settings in the mail client. Some contributions appear as Ricardo Ribalda, others as Ricardo Ribalda Delgado (and one as just Ricardo). Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
Add personal details to CREDITS file. Signed-off-by:
-
Joe Perches authored
Consistently use a single tab after the "specifier:" type. Signed-off-by:
-
Rasmus Villemoes authored
The current semantics of string_escape_mem are inadequate for one of its current users, vsnprintf(). If that is to honour its contract, it must know how much space would be needed for the entire escaped buffer, and string_escape_mem provides no way of obtaining that (short of allocating a large enough buffer (~4 times input string) to let it play with, and that's definitely a big no-no inside vsnprintf). So change the semantics for string_escape_mem to be more snprintf-like: Return the size of the output that would be generated if the destination buffer was big enough, but of course still only write to the part of dst it is allowed to, and (contrary to snprintf) don't do '\0'-termination. It is then up to the caller to detect whether output was truncated and to append a '\0' if desired. Also, we must output partial escape sequences, otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever they previously contained. This also fixes a bug in the escaped_string() helper function, which used to unconditionally pass a length of "end-buf" to string_escape_mem(); since the latter doesn't check osz for being insanely large, it would happily write to dst. For example, kasprintf(GFP_KERNEL, "something and then %pE", ...); is an easy way to trigger an oops. In test-string_helpers.c, the -ENOMEM test is replaced with testing for getting the expected return value even if the buffer is too small. We also ensure that nothing is written (by relying on a NULL pointer deref) if the output size is 0 by passing NULL - this has to work for kasprintf("%pE") to work. In net/sunrpc/cache.c, I think qword_add still has the same semantics. Someone should definitely double-check this. In fs/proc/array.c, I made the minimum possible change, but longer-term it should stop poking around in seq_file internals. [andriy.shevchenko@linux.intel.com: simplify qword_add] [andriy.shevchenko@linux.intel.com: add missed curly braces] Signed-off-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Rasmus Villemoes authored
When printf is given the format specifier %pE, it needs a way of obtaining the total output size that would be generated if the buffer was large enough, and string_escape_mem doesn't easily provide that. This is a refactorization of string_escape_mem in preparation of changing its external API to provide that information. The somewhat ugly early returns and subsequent seemingly redundant conditionals are to make the following patch touch as little as possible in string_helpers.c while still preserving the current behaviour of never outputting partial escape sequences. That behaviour must also change for %pE to work as one expects from every other printf specifier. Signed-off-by:
-
Rasmus Villemoes authored
The helper hex_string() is broken in two ways. First, it doesn't increment buf regardless of whether there is room to print, so callers such as kasprintf() that try to probe the correct storage to allocate will get a too small return value. But even worse, kasprintf() (and likely anyone else trying to find the size of the result) pass NULL for buf and 0 for size, so we also have end == NULL. But this means that the end-1 in hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL pointer deref. I double-checked this with a trivial kernel module that just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang"). Nobody seems to be using %ph with kasprintf, but we might as well fix it before it hits someone. Signed-off-by:
-
Geert Uytterhoeven authored
Add format specifiers for printing struct clk: - '%pC' or '%pCn': name (Common Clock Framework) or address (legacy clock framework) of the clock, - '%pCr': rate of the clock. [akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK] Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Geert Uytterhoeven authored
Move the format types for 64-bit integers and configurable size integers to the top, so they're next to the other integer format types. While at it, add the missing format types for s32 and u32. Signed-off-by:
-
Geert Uytterhoeven authored
This patch series improves the documentation for printk() formats, and adds support for printing clocks. The latter has always been a hassle if you wanted to support both the common and legacy clock frameworks. - '%pC' and '%pCn' print the name (Common Clock Framework) or address (legacy clock framework) of a clock, - '%pCr' prints the current clock rate. This patch (of 3): Make sure all %p extensions that take parameters by references are documented to do so. Signed-off-by: -
Rasmus Villemoes authored
Making ZEROPAD == '0'-' ', we can eliminate a few more instructions. Signed-off-by:
-
Rasmus Villemoes authored
gcc doesn't merge or overlap const char[] objects with identical contents (probably language lawyers would also insist that these things have different addresses), but there's no reason to have the string "0123456789ABCDEF" occur in multiple places. hex_asc_upper is declared in kernel.h and defined in lib/hexdump.c, which is unconditionally compiled in. Signed-off-by:
-
Rasmus Villemoes authored
At least since the initial git commit, when base was passed as a separate parameter, number() has only been called with bases 8, 10 and 16. I'm guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the buffer is only used for the actual digits. Octal digits carry 3 bits of information, so 24 is enough. Spell that 3*sizeof(num) so one less place needs to be changed should long long ever be 128 bits. Also remove the commented-out code that would handle an arbitrary base. Signed-off-by:
-
