- 23 Mar, 2017 1 commit
-
-
Janusz Krzysztofik authored
After changes to v4l2_clk API introduced in v4.1 by commits a37462b9 '[media] V4L: remove clock name from v4l2_clk API' and 4f528afc '[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor stopped responding because v4l2_clk_get(), still called with depreciated V4L2 clock name "mclk", started to return respective CCF clock instead of the V4l2 one registered by soc_camera. Fix it by calling v4l2_clk_get() with NULL clock name. Created and tested on Amstrad Delta against Linux-4.7-rc3 with omap1_camera fixes. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 22 Mar, 2017 39 commits
-
-
Anton Sviridenko authored
Fixes warning that appears in dmesg after closing V4L2 userspace application that plays video from the display device (first device from V4L2 device nodes provided by solo, usually /dev/video0 when no other V4L2 devices are present). Encoder device nodes are not affected. Can be reproduced by starting and closing ffplay -f video4linux2 /dev/video0 [ 8130.281251] ------------[ cut here ]------------ [ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230 [ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) [ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G O 4.10.0-gentoo #1 [ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015 [ 8130.281265] Call Trace: [ 8130.281267] dump_stack+0x4f/0x72 [ 8130.281270] __warn+0xc7/0xf0 [ 8130.281271] warn_slowpath_null+0x18/0x20 [ 8130.281272] __vb2_queue_cancel+0x14b/0x230 [ 8130.281273] vb2_core_streamoff+0x23/0x90 [ 8130.281275] vb2_streamoff+0x24/0x50 [ 8130.281276] vb2_ioctl_streamoff+0x3d/0x50 [ 8130.281278] v4l_streamoff+0x15/0x20 [ 8130.281279] __video_do_ioctl+0x25e/0x2f0 [ 8130.281280] video_usercopy+0x279/0x520 [ 8130.281282] ? v4l_enum_fmt+0x1330/0x1330 [ 8130.281285] ? unmap_region+0xdf/0x110 [ 8130.281285] video_ioctl2+0x10/0x20 [ 8130.281286] v4l2_ioctl+0xce/0xe0 [ 8130.281289] do_vfs_ioctl+0x8b/0x5b0 [ 8130.281290] ? __fget+0x72/0xa0 [ 8130.281291] SyS_ioctl+0x74/0x80 [ 8130.281294] entry_SYSCALL_64_fastpath+0x13/0x94 [ 8130.281295] RIP: 0033:0x7ff86fee6b27 [ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27 [ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006 [ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140 [ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000 [ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228 [ 8130.281300] ---[ end trace 00695dc96be646e7 ]--- Signed-off-by:
Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Bartosz Golaszewski authored
This makes the example more or less correspond with the da850-evm hardware setup. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bartosz Golaszewski authored
The examples have been copied from the DT with whitespace errors. Fix them. Signed-off-by:
-
Bartosz Golaszewski authored
The vpif display driver uses a static i2c adapter ID of 1 but on the da850-evm board in DT boot mode the i2c adapter ID is actually 0. Make the adapter ID configurable like it already is for vpif capture. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
-
Frank Schaefer authored
It's no longer necessary to keep the i2c_client in the device struct unmodified until a sensor is found, so reduce stack usage in em28xx_probe_sensor_micron() and em28xx_probe_sensor_omnivision() by using a pointer to the client instead of a local copy. Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Sakari Ailus authored
The CEC documentation added two sections on the main media kAPI level. There should be only one. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Fengguang Wu authored
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1296:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Rick Chang <rick.chang@mediatek.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Laurent Pinchart authored
All remaining soc-camera drivers use videobuf2, drop support for videobuf1. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Wu-Cheng Li authored
VPU firmware has a bug and may return invalid buffer index for some vp9 videos. Check the buffer indexes before accessing the buffer. Signed-off-by:
Wu-Cheng Li <wuchengli@chromium.org> Acked-by:
Tiffany Lin <Tiffany.lin@mediatek.com> Signed-off-by:
-
Randy Dunlap authored
Include <linux/slab.h> to fix these build errors: ../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c: In function 'mtk_jpeg_open': ../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1017:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); ../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1017:6: warning: assignment makes pointer from integer without a cast [enabled by default] ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); ../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1047:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] kfree(ctx); Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> Cc: Rick Chang <rick.chang@mediatek.com> Cc: Bin Liu <bin.liu@mediatek.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Javier Martinez Canillas authored
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
-
Wei Yongjun authored
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
-
Sebastian Reichel authored
Previously multiple calls to v4l2_device_register_subdev_nodes() ended up corrupting memory and leaking some, too. This patch changes the behaviour so that sub-devices the device nodes of which are already registered are ignored. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Sakari Ailus authored
Skipping, which is sometimes used in terminology related to sensors when referring to sub-sampling is replaced by more suitable sub-sampling instead. Skipping is retained in a note in parentheses. Suggested-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Before this patch: $ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias alias: i2c:et8ek8 After this patch: $ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias alias: i2c:et8ek8 alias: of:N*T*Ctoshiba,et8ek8C* alias: of:N*T*Ctoshiba,et8ek8 Signed-off-by:
-
Hans Verkuil authored
Feature Abort shouldn't be sent in reply to messages from Unregistered, since that would make it a broadcast message. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
When validating the struct cec_s_log_addrs input a debug message is printed for all except two of the 'return -EINVAL' paths. Also log the reason for the missing two paths. Signed-off-by:
-
Hans Verkuil authored
Several error paths didn't log why an error was returned. Add this. Also handle the corner case of "adapter is unconfigured AND the message is from Unregistered to TV AND reply is non-zero" separately and return EINVAL in that case, since it really is an invalid value and not an unconfigured CEC device. Signed-off-by:
-
Hans Verkuil authored
The hardcoded function name is actually wrong. Use __func__ instead. Signed-off-by:
-
Hans Verkuil authored
Even when the CEC device is unconfigured due to an invalid physical address it is still allowed to send a message from 0xf (Unregistered) to 0 (TV). This is a corner case explicitly allowed by the CEC specification. Document this corner case. Signed-off-by:
-
Hans Verkuil authored
Document all the various error codes returned by the CEC ioctls. These were never documented, instead the documentation relied on a reference to the generic error codes, but that's not sufficient. Signed-off-by:
-
Hans Verkuil authored
The CEC_TRANSMIT ioctl now returns -EPERM if an attempt is made to transmit a message for an unconfigured adapter (i.e. userspace never called CEC_ADAP_S_LOG_ADDRS). This differentiates this case from when LAs are configured, but no physical address is set. In that case -ENONET is returned. Signed-off-by:
-
Hans Verkuil authored
The CEC specifications explicitly allows you to send poll messages and Image/Text View On messages to a TV, even when unconfigured (i.e. there is no hotplug signal detected). Some TVs will pull the HPD low when switching to another input, or when going into standby, but CEC should still be allowed to wake up such a display. Add support for sending messages with initiator 0xf (Unregistered) and destination 0 (TV) when no physical address is present. This also required another change: the CEC adapter has to stay enabled as long as 1) the CEC device is configured or 2) at least one filehandle is open for the CEC device. Signed-off-by:
-
Hans Verkuil authored
When the adapter is unloaded or unconfigured, then all transmits and pending waits should be flushed. Move this code into its own function and improve the code that cancels delayed work to avoid having to unlock adap->lock. Signed-off-by:
-
Hans Verkuil authored
Fixed a few spelling mistakes, but mostly incorrect rst syntax that caused wrong references or font style. No actual documentation changes, just fixes. Signed-off-by:
-
Hans Verkuil authored
vivid_try_fmt_vid_cap() called tpg_calc_line_width to calculate the sizeimage value, but that tpg function uses the current format, not the proposed (tried) format. Rewrote this code to calculate this correctly. The vivid_try_fmt_vid_out() code was completely wrong w.r.t. sizeimage, and neither did it take the vdownsampling[] factors into account. Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by:
-
Hans Verkuil authored
The xvYCC601/709 encodings were mapped by default to full range quantization. This is actually wrong since these encodings use limited range quantization, but accept values outside of the limited range. This makes sense since for values within the limited range it behaves exactly the same as BT.601 or Rec. 709. The only difference is that with the xvYCC encodings the values outside of the limited range also produce value colors. Talking to people who know a lot more about this than I do made me realize that mapping xvYCC to full range quantization was wrong, so this patch corrects this and also improves the documentation. These formats are very rare, and since the formula for decoding these Y'CbCr encodings is actually fixed and independent of the quantization field value it is safe to make this change. The main advantage is that keeps the V4L2 specification in sync with the corresponding colorspace, HDMI and CEA861 standards when it comes to these xvYCC formats. Signed-off-by:
-
Arnd Bergmann authored
tw5864_frameinterval_get() only initializes its output when it successfully identifies the video standard in tw5864_input. We get a warning here because gcc can't always track the state if initialized warnings across a WARN() macro, and thinks it might get used incorrectly in tw5864_s_parm: media/pci/tw5864/tw5864-video.c: In function 'tw5864_s_parm': media/pci/tw5864/tw5864-video.c:816:38: error: 'time_base.numerator' may be used uninitialized in this function [-Werror=maybe-uninitialized] media/pci/tw5864/tw5864-video.c:819:31: error: 'time_base.denominator' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using dev_warn() instead of WARN() avoids the __branch_check__() in unlikely and lets the compiler see that the initialization is correct. Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
-
Gustavo Padovan authored
We already check for the V4L2_EVENT_CTRL inside v4l2_ctrl_subscribe_event() so just move this function to the default: branch of the switch and let it does the job for us. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
-
Gustavo Padovan authored
We already check for the V4L2_EVENT_CTRL inside v4l2_ctrl_subscribe_event() so just move this fuction to the default: branch of the switch and let it does the job for us. Signed-off-by:
-
Gustavo Padovan authored
We already check for the V4L2_EVENT_CTRL inside v4l2_ctrl_subscribe_event() so just move this function to the default: branch of the switch and let it does the job for us. Signed-off-by:
-
Gustavo Padovan authored
We already check for the V4L2_EVENT_CTRL inside v4l2_ctrl_subscribe_event() so just move the function to the default: branch of the switch and let it does the job for us. Signed-off-by:
-
Gustavo Padovan authored
Simplify logic and call v4l2_ctrl_subscribe_event() directly instead of copying its content over to ivtv_subscribe_event(). Signed-off-by:
-
Gustavo Padovan authored
Move the ret check to the right level under if (pb). It is not used by the code before that point if pb is NULL. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/platform/coda/coda-common.c: In function ‘coda_alloc_aux_buf’: ./include/linux/kern_levels.h:4:18: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=] #define KERN_SOH "\001" /* ASCII Start Of Header */ ^ ./include/media/v4l2-common.h:69:9: note: in definition of macro ‘v4l2_printk’ printk(level "%s: " fmt, (dev)->name , ## arg) ^~~~~ ./include/linux/kern_levels.h:10:18: note: in expansion of macro ‘KERN_SOH’ #define KERN_ERR KERN_SOH "3" /* error conditions */ ^~~~~~~~ ./include/media/v4l2-common.h:72:14: note: in expansion of macro ‘KERN_ERR’ v4l2_printk(KERN_ERR, dev, fmt , ## arg) ^~~~~~~~ drivers/media/platform/coda/coda-common.c:1341:3: note: in expansion of macro ‘v4l2_err’ v4l2_err(&dev->v4l2_dev, ^~~~~~~~ Hans wrote a similar patch, but it was fold with a Kconfig change. So, I opted to keep my version. Signed-off-by Hans Verkuil <hans.verkuil@cisco.com> Acked-by Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, IMX_VDOA and VIDEO_CODA only builds on ARCH_MXC. That prevented me to build-test the driver, causing a bad patch to be applied, and to see other warnings on this driver. Hans wrote a similar patch, but his version was fold with a warning fixup hunk. So, I opted to keep my version. Reported-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
-
