Get rid of

  encode_compound: tag=

when XDR debugging is enabled.  The current Linux client never sets
compound tags.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The fh_expire_type file attribute is a filesystem wide attribute that
consists of flags that indicate what characteristics file handles
on this FSID have.

Our client doesn't support volatile file handles.  It should find
out early (say, at mount time) whether the server is going to play
shenanighans with file handles during a migration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The Linux NFS client must distinguish between referral events (which
it currently supports) and migration events (which it does not yet
support).

In both types of events, an fs_locations array is returned.  But upper
layers, not the XDR layer, should make the distinction between a
referral and a migration.  There really isn't a way for an XDR decoder
function to distinguish the two, in general.

Slightly adjust the FATTR flags returned by decode_fs_locations()
to set NFS_ATTR_FATTR_V4_LOCATIONS only if a non-empty locations
array was returned from the server.  Then have logic in nfs4proc.c
distinguish whether the locations array is for a referral or
something else.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: pass just the clientid4 to encode_renew().  This enables it
to be used by callers who might not have an full nfs_client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

For debugging, introduce a simplistic function to print NFS file
handles on the system console.  The main function is hooked into the
dprintk debugging facility, but you can directly call the helper,
_nfs_display_fhandle(), if you want to print a handle unconditionally.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

For NFSv4 mounts, the clientaddr= mount option has always been
required.  Now we have rpc_localaddr() in the kernel, which was
modeled after the same logic in the mount.nfs command that constructs
the clientaddr= mount option.  If user space doesn't provide a
clientaddr= mount option, the kernel can now construct its own.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.0 clients must send endpoint information for their callback
service to NFSv4.0 servers during their first contact with a server.
Traditionally on Linux, user space provides the callback endpoint IP
address via the "clientaddr=" mount option.

During an NFSv4 migration event, it is possible that an FSID may be
migrated to a destination server that is accessible via a different
source IP address than the source server was.  The client must update
callback endpoint information on the destination server so that it can
maintain leases and allow delegation.

Without a new "clientaddr=" option from user space, however, the
kernel itself must construct an appropriate IP address for the
callback update.  Provide an API in the RPC client for upper layer
RPC consumers to acquire a source address for a remote.

The mechanism used by the mount.nfs command is copied: set up a
connected UDP socket to the designated remote, then scrape the source
address off the socket.  We are careful to select the correct network
namespace when setting up the temporary UDP socket.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

When the cl_xprt field is updated, the cl_server field will also have
to change.  Since the contents of cl_server follow the remote endpoint
of cl_xprt, just move that field to the rpc_xprt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: simplify check_gss_callback_principal(), whitespace changes ]
[ cel: forward ported to 3.4 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

A migration event will replace the rpc_xprt used by an rpc_clnt.  To
ensure this can be done safely, all references to cl_xprt must now use
a form of rcu_dereference().

Special care is taken with rpc_peeraddr2str(), which returns a pointer
to memory whose lifetime is the same as the rpc_xprt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: fix lockdep splats and layering violations ]
[ cel: forward ported to 3.4 ]
[ cel: remove rpc_max_reqs(), add rpc_net_ns() ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

CLOSE is new with NFSv4.  Sometimes it's important to know the timing
of this operation compared to things like lease renewal.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

I noticed recently that decode_attr_fs_locations() is not generating
very pretty debugging output.  The pathname components each appear on
a separate line of output, though that does not appear to be the
intended display behavior.  The preferred way to generate continued
lines of output on the console is to use pr_cont().

Note that incoming pathname4 components contain a string that is not
necessarily NUL-terminated.  I did actually see some trailing garbage
on the console.  In addition to correcting the line continuation
problem, add a string precision format specifier to ensure that each
component string is displayed properly, and that vsnprintf() does
not Oops.

Someone pointed out that allowing incoming network data to possibly
generate a console line of unbounded length may not be such a good
idea.  Since this output will rarely be enabled, and there is a hard
upper bound (NFS4_PATHNAME_MAXCOMPONENTS) in our implementation, this
is probably not a major concern.

It might be useful to additionally sanity-check the length of each
incoming component, however.  RFC 3530bis15 does not suggest a maximum
number of UTF-8 characters per component for either the pathname4 or
component4 types.  However, we could invent one that is appropriate
for our implementation.

Another possibility is to scrap all of this and print these pathnames
in upper layers after a reasonable amount of sanity checking in the
XDR layer.  This would give us an opportunity to allocate a full
buffer so that the whole pathname would be output via a single
dprintk.

Introduced by commit 7aaa0b3b: "NFSv4: convert fs-locations-components
to conform to RFC3530," (June 9, 2006).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Eliminate a number of implicit type casts in comparisons, and these
compiler warnings:

fs/nfs/dir.c: In function ‘nfs_readdir_clear_array’:
fs/nfs/dir.c:264:16: warning: comparison between signed and unsigned
		integer expressions [-Wsign-compare]
fs/nfs/dir.c: In function ‘nfs_readdir_search_for_cookie’:
fs/nfs/dir.c:352:16: warning: comparison between signed and unsigned
		integer expressions [-Wsign-compare]
fs/nfs/dir.c: In function ‘nfs_do_filldir’:
fs/nfs/dir.c:769:38: warning: comparison between signed and unsigned
		integer expressions [-Wsign-compare]
fs/nfs/dir.c:780:9: warning: comparison between signed and unsigned
		integer expressions [-Wsign-compare]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The 'minorversion' mount option is now deprecated, so we need to display
the minor version number in the 'vers=' format.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Allow the user to mount an NFSv4.0 or NFSv4.1 partition using a
standard syntax of '-overs=4.0', or '-overs=4.1' rather than the
more cumbersome '-overs=4,minorversion=1'.

See also the earlier patch by Dros Adamson, which added the
Linux-specific syntax '-ov4.0', '-ov4.1'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Shows the implementation ids in /proc/self/mountstats.  This doesn't break
the nfs-utils mountstats tool.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

server_scope would never be freed if nfs4_check_cl_exchange_flags() returned
non-zero
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Send the nfs implementation id in EXCHANGE_ID requests unless the module
parameter nfs.send_implementation_id is 0.

This adds a CONFIG variable for the nii_domain that defaults to "kernel.org".
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This patch removes the old hashmap-based caching and instead uses a
"request key actor" to place an upcall to the legacy idmapper rather
than going through /sbin/request-key.  This will only be used as a
fallback if /etc/request-key.conf isn't configured to use nfsidmap.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The keyctl_set_timeout function isn't exported to other parts of the
kernel, but I want to use it for the NFS idmapper.  I already have the
key, but I wanted a generic way to set the timeout.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The NFS4CLNT_LAYOUTRECALL bit is a long-term impediment to scalability. It
basically stops all other recalls by a given server once any layout recall
is requested.

If the recall is for a different file, then we don't care.
If the recall applies to the same file, then we're in one of two situations:
Either we are in the case of a replay of an existing request, in which case
the session is supposed to deal with matters, or we are dealing with a
completely different request, in which case we should just try to process
it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and
pnfs_update_layout are redundant.

In the case of a bulk layout recall, we're always testing for
the NFS_LAYOUT_BULK_RECALL flay anyway.
In the case of a file or segment recall, the call to
pnfs_set_layout_stateid() updates the layout_header 'barrier'
sequence id, which triggers the test in pnfs_layoutgets_blocked()
and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, wait queue, used for polling of RPC pipe changes from user-space,
is a part of RPC pipe. But the pipe data itself can be released on NFS umount
prior to dentry-inode pair, connected to it (is case of this pair is open by
some process).
This is not a problem for almost all pipe users, because all PipeFS file
operations checks pipe reference prior to using it.
Except evenfd. This thing registers itself with "poll" file operation and thus
has a reference to pipe wait queue. This leads to oopses on destroying eventfd
after NFS umount (like rpc_idmapd do) since not pipe data left to the point
already.
The solution is to wait queue from pipe data to internal RPC inode data. This
looks more logical, because this wiat queue used only for user-space processes,
which already holds inode reference.

Note: upcalls have to get pipe->dentry prior to dereferecing wait queue to make
sure, that mount point won't disappear from underneath us.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

There are 2 tightly bound objects: pipe data (created for kernel needs, has
reference to dentry, which depends on PipeFS mount/umount) and PipeFS
dentry/inode pair (created on mount for user-space needs). They both
independently may have or have not a valid reference to each other.
This means, that we have to make sure, that pipe->dentry reference is valid on
upcalls, and dentry->pipe reference is valid on downcalls. The latter check is
absent - my fault.
IOW, PipeFS dentry can be opened by some process (rpc.idmapd for example), but
it's pipe data can belong to NFS mount, which was unmounted already and thus
pipe data was destroyed.
To fix this, pipe reference have to be set to NULL on rpc_unlink() and checked
on PipeFS file operations instead of pipe->dentry check.

Note: PipeFS "poll" file operation will be updated in next patch, because it's
logic is more complicated.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.

Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.

Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Otherwise we have no guarantee that the net namespace won't just
disappear from underneath us once the task that created it
is destroyed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Currently, the nfs_parsed_mount_data->net field is initialised in
the nfs_parse_mount_options() function, which means that it only
gets set if we're using text based mounts. The legacy binary
mount interface is therefore broken.

Fix is to initialise the ->net field in nfs_alloc_parsed_mount_data.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Include RPC statistics from all data servers in /proc/self/mountstats for pNFS
filelayout mounts.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: Fix a debugging message which had an obsolete function name
in it (nfs_follow_mountpoint).

Introduced by commit 36d43a43 "NFS: Use d_automount() rather than
abusing follow_link()" (January 14, 2011)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Our dprintk() debugging facility doesn't specify any verbosity level
for it's printk() calls, but it should.

The default verbosity for printk's is KERN_DEFAULT.  You might argue
that these are debugging printk's and thus the verbosity should be
KERN_DEBUG.  That would mean that to see NFS and SUNRPC debugging
output an admin would also have to boost the syslog verbosity, which
would be insufferably noisy.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

With static RPC slots, the xprt backlog queue stats were useful in showing
when the transport (TCP) was starved by lack of RPC slots. The new dynamic
RPC slot code, commit d9ba131d, always
provides an RPC slot and so only uses the xprt backlog queue when the
tcp_max_slot_table_entries value has been hit or when an allocation error
occurs. All requests are now placed on the xprt sending or pending queue which
need to be monitored for debugging.

The max_slot stat shows the maximum number of dynamic RPC slots reached which is
useful when debugging performance issues.

Add the new fields at the end of the mountstats xprt stanza so that mountstats
outputs the previous correct values and ignores the new fields. Bump
NFS_IOSTATS_VERS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

 ca_maxoperations:

      For the backchannel, the server MUST
      NOT change the value the client offers.  For the fore channel,
      the server MAY change the requested value.

  ca_maxrequests:

       For the backchannel, the server MUST NOT change the
       value the client offers.  For the fore channel, the server MAY
       change the requested value.
Signed-off-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Don't allow invalid 'vers' and 'minorversion' combinations in mount options,
such as "vers=3,minorversion=1".
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The tracepoint code relies on the queue->name being defined in order to
be able to display the name of the waitqueue on which an RPC task is
sleeping.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>

Don't allocate the legacy idmapper tables until we actually need
them.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>

Add the appropriate 'select KEYS' to the NFSv4 Kconfig entry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>