* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Clean up max8997 IRQ namespace
  mfd: Fold irq_set_chip/irq_set_handler
  mfd: Cleanup irq namespace
  mfd: twl6030: Cleanup interrupt handling
  mfd: twl4030: Cleanup interrupt handling
  mfd: mx8925: Remove irq_desc leftovers
  mfd: htc-i2cpld: Cleanup interrupt handling
  mfd: htc-egpio: Cleanup interrupt handling
  mfd: ezx-pcap: Remvove open coded irq handling
  mfd: 88pm860x: Remove unused irq_desc leftovers
  mfd: asic3: Cleanup irq handling
  mfd: Select MFD_CORE if TPS6105X driver is configured
  mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
  mfd: Add MAX8997/8966 IRQ control
  mfd: Constify i2c_device_id tables
  mfd: OLPC: Clean up names to match what OLPC actually uses
  mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (pmbus) Fix temperature limit register access

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  hwspinlock: depend on OMAP4
  ARM: OMAP2+: Fix warnings for GPMC interrupt
  OMAP4: PandaBoard: remove unused power regulators
  arm: mach-omap2: omap_l3_smx: fix irq handler setup
  arm: mach-omap2: devices: fix omap3_l3_init() return value

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
  ide: ensure that we re-run the queue handler

* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits)
  cciss: fix lost command issue
  drbd: need include for bitops functions declarations
  Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation"
  cciss: fix missed command status value CMD_UNABORTABLE
  cciss: remove unnecessary casts
  cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
  cciss: Inform controller we are using 32-bit tags.
  cciss: hoist tag masking out of loop
  cciss: Add missing allocation in scsi_cmd_stack_setup and  corresponding deallocation
  cciss: export resettable host attribute
  drbd: drop code present under #ifdef which is relevant to 2.6.28 and below
  drbd: Fixed handling of read errors on a 'VerifyS' node
  drbd: Fixed handling of read errors on a 'VerifyT' node
  drbd: Implemented real timeout checking for request processing time
  drbd: Remove unused function atodb_endio()
  drbd: improve log message if received sector offset exceeds local capacity
  drbd: kill dead code
  drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
  drbd: Removed left over, now wrong comments
  drbd: serialize admin requests for new verify run with pending bitmap io
  ...

* 'docs-next' of git://git.lwn.net/linux-2.6:
  docs: update the development process document
  docs: fix dev_debug() braino in dynamic-debug-howto.txt

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (f71882fg) Add support for the F71889A
  hwmon: (f71882fg) Add support for the F81865F
  hwmon: (f71882fg) Document all supported devices
  hwmon: (f71882fg) Per-chip fan/temperature input count tables
  hwmon: (f71882fg) Secure chip property definition arrays

* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits)
  mtd: mtdswap: fix compilation warning
  mtdswap: kill strict error handling option
  mtd: nand: enable software BCH ECC in nand simulator
  mtd: nand: add software BCH ECC support
  mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
  mtd: sm_rtl: check kmalloc return value
  mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
  lib: add shared BCH ECC library
  mtd: mxc_nand: fix OOB corruption when page size > 2KiB
  mtd: DaVinci: Removed header file that is not required
  mtd: pxa3xx_nand: clean the keep configure code
  mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
  mtd: pxa3xx_nand: unify prepare command
  mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
  mtd: pxa3xx_nand: rework irq logic
  mtd: pxa3xx_nand: make scan procedure more clear
  mtd: speedtest: fix integer overflow
  mtd: mxc_nand: fix read past buffer end
  mtd: omap3: nand: report corrected ecc errors
  jffs2: remove a trailing white space in commentaries
  ...

I no longer have access to any hardware that uses APM and have not
provided real maintenance for several years.  Hopefully someone with the
hardware or energy will step forward if the driver is to be kept.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-and-appreciated-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix fsl_rio.c kernel-doc warning: no exported symbols as
requested by !E are found:

  Warning(arch/powerpc/sysdev/fsl_rio.c): no structured comments found
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DocBook/v4l/ no longer has any *.png files, so the 'cp' command fails,
breaking the build.  Drop the *.png cp.

  cp: cannot stat `linux-2.6.38-git18/Documentation/DocBook/v4l/*.png': No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix inode.c kernel-doc fatal error: 2 comment sections have the same name:

  Error(fs/inode.c:1171): duplicate section name 'Note'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix ipc/util.c kernel-doc warnings:

  Warning(ipc/util.c:336): No description found for parameter 'ns'
  Warning(ipc/util.c:620): No description found for parameter 'ns'
  Warning(ipc/util.c:790): No description found for parameter 'ns'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix mm/memory.c incorrect kernel-doc function notation:

  Warning(mm/memory.c:3718): Cannot understand  * @access_remote_vm - access another process' address space
   on line 3718 - I thought it was a doc line
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When m_start returns an error, the seq_file logic will still call m_stop
with that error entry, so we'd better make sure that we check it before
using it as a vma.

Introduced by commit ec6fd8a4 ("report errors in /proc/*/*map*
sanely"), which replaced NULL with various ERR_PTR() cases.

(On ia64, you happen to get a unaligned fault instead of a page fault,
since the address used is generally some random error code like -EPERM)
Reported-by: Anca Emanuel <anca.emanuel@gmail.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Use the combined irq_set_chip_and_handler() function
instead. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

irq_desc checking in the interrupt demux routine is totally
pointless. The driver sets those lines up, so that cant go away
magically.

Remove the open coded handler magic and use the proper accessor.

This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

irq_desc checking in a function which is called with that irq
descriptor locked, is pointless. Equally pointless as the irq desc
check in the interrupt service routine. The driver sets those lines
up, so that cant go away magically.

Remove the open coded handler magic and use the proper accessor.

No need to fiddle with irq_desc in the type setting function. The
original value is in irq_data and the core code stores the new setting
when the return value is 0.

This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove unused code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove the pointless irq_desc check in set_type. This function is
called with that irq descriptor locked. Also remove the write back of
the flow type as the core code does this already when the return value
is 0.

Also store the flow type in the chip data structure, so there is no
need to fiddle in the irq descriptor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Replace the open coded handler call with the prober accessor. Retrieve
the handler data from desc. That avoids a redundant lookup in the
sparse irq case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

There is no point in checking irq_desc here, as it _is_ available. The
driver configured those lines, so they cannot go away.

The home brewn disabled/note_interrupt magic can be removed as well by
adding a irq_disable callback which avoids the lazy disable.

That driver needs to be converted to threaded interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove the open coded access to irq_desc and use the proper wrappers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The TPS61050/61052 driver uses MFD core code, yet does not specify the
dependency in Kconfig. If it is the only MFD driver configured, compilation
fails with

ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined!
ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined!

Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The device table is required to load modules based on modaliases.
After adding MODULE_DEVICE_TABLE, below entry will be added to modules.pcimap:
rdc321x-southbridge  0x000017f3 0x00006030 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

This patch enables IRQ handling for MAX8997/8966 chips.

Please note that Fuel-Gauge-related IRQs are not implemented in this
initial release. The fuel gauge module in MAX8997 is identical to
MAX17042, which is already in Linux kernel. In order to use the
already-existing MAX17042 driver for fuel gauge module in MAX8997, the
main interrupt handler of MAX8997 should relay related interrupts to
MAX17042 driver. However, in order to do this, we need to modify
MAX17042 driver as well because MAX17042 driver does not have any
interrupt handlers for now. We are not going to implement this in this
initial release as it is not crucial in basic operations of MAX8997.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The cs5535-pms cell doesn't actually need to be cloned, so we can drop that
and simply have the olpc-xo1.c driver use "cs5535-pms" directly.

Also, rename the cs5535-acpi clones to what we actually use for the (currently
out-of-tree) SCI driver.  In the process, that fixes a subtle bug in
olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not
something that actually existed.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Replace mfd_shared_platform_driver_register with mfd_clone_cell.  The
former was called by an mfd client, and registered both a platform driver
and device.  The latter is called by an mfd driver, and registers only a
platform device.

The downside of this is that mfd drivers need to be modified whenever
new clients are added that share a cell; the upside is that it fits
Linux's driver model better.  It's also simpler.

This also converts cs5535-mfd/olpc-xo1 from the old API.  cs5535-mfd
now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to
them via platform drivers.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Commit cafb0bfc (staging: Convert to bdops->check_events())
incorrectly set bd->user_disk_0->events while initializing
bd->user_disk_1.  Fix it.

The problem was spotted by Milton's suspect code pattern detector.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

The conversion to blk_delay_queue() missed parts of IDE.
Add a blk_delay_queue() to ensure that the request handler
gets reinvoked when it needs to.

Note that in all but one place the old plug re-run delay of
3 msecs is used, even though it probably could be shorter
for performance reasons in some of those cases.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Commit 8677011a added auto-update to temperature limit registers.
Unfortunately, the update flag is also used to determine if an attribute
is writable, which results in read-only temperature limit registers.
To fix the problem, pass 'readonly' as separate flag to the function used
to add sensor attributes.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>