- 10 Mar, 2020 12 commits
-
-
Pierre-Louis Bossart authored
The rt5682 code can be used in I2C or SoundWire mode. When I2C is not selected, we have the following issue: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SOUNDWIRE [=m] Fix by adding SOUNDWIRE as a dependency. Fixes: 03f6fc6d ('ASoC: rt5682: Add the soundwire support') Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200310163509.14466-2-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series "ASoC: soc-pcm cleanup step6" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark We are using plural form for for_each_xxx() macro. But, for_each_rtd_codec/cpu_dai() are out of this rule. 1) - 7) are for it. 8) - 9) add new for_each_card_xxx() macros. Kuninori Morimoto (9): 1) ASoC: soc.h: add for_each_rtd_codecs/cpus_dai() macro 2) ASoC: Intel: use for_each_rtd_codecs/cpus_dai() macro 3) ASoC: mediatek: use for_each_rtd_codecs/cpus_dai() macro 4) ASoC: meson: use for_each_rtd_codecs/cpus_dai() macro 5) ASoC: qcom: use for_each_rtd_codecs/cpus_dai() macro 6) ASoC: soc: use for_each_rtd_codecs/cpus_dai() macro 7) ASoC: soc.h: remove non plural form for_each_xxx macro 8) ASoC: soc-dapm: add for_each_card_dapms() macro 9) ASoC: soc-dapm: add for_each_card_widgets() macro drivers/soundwire/qcom.c | 2 +- include/sound/soc.h | 28 ++-- sound/soc/intel/boards/cml_rt1011_rt5682.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +- .../mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +- .../mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 +- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 +- .../mediatek/mt8183/mt8183-da7219-max98357.c | 4 +- sound/soc/meson/axg-card.c | 2 +- sound/soc/meson/meson-card-utils.c | 2 +- sound/soc/qcom/apq8016_sbc.c | 2 +- sound/soc/qcom/sdm845.c | 8 +- sound/soc/soc-core.c | 16 +-- sound/soc/soc-dapm.c | 53 ++++---- sound/soc/soc-pcm.c | 124 +++++++++--------- sound/soc/soc-topology.c | 2 +- 18 files changed, 134 insertions(+), 125 deletions(-) -- 2.17.1
-
Cezary Rojewski authored
Firmware API changes which introduced 'num_elems' param in several probe structs such as sof_ipc_probe_dma_add_params also impacted getter for both, DMA and probe points. All struct handlers except for sof_ipc_probe_info_params have been updated. Align said handler too to calculate payload size correctly. Fixes: f3b433e4 ("ASoC: SOF: Implement Probe IPC API") Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Acked-by:
-
Kuninori Morimoto authored
To be more readable code, this patch adds new for_each_card_widgets() macro, and replace existing code to it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Kuninori Morimoto authored
To be more readable code, this patch adds new for_each_card_dapms() macro, and replace existing code to it. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by:
-
Kuninori Morimoto authored
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by:
-
Kuninori Morimoto authored
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by:
-
Kuninori Morimoto authored
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by:
-
Kuninori Morimoto authored
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by:
-
Kuninori Morimoto authored
We are using plural form for for_each_xxx() macro. But, for_each_rtd_codec/cpu_dai() are out of this rule. This patch adds plural form macro. Signed-off-by:
-
- 09 Mar, 2020 4 commits
-
-
Paul Cercueil authored
Instead of passing an enum as match data, and checking its value in the probe to register one or the other dai, pass a pointer to a struct i2s_soc_info, which contains all the information relative to one SoC. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200306222931.39664-4-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
Make the code cleaner by using a "struct device *dev" variable instead of dereferencing it everytime from within the struct platform_device. Signed-off-by:
-
Ravulapati Vishnu vardhan rao authored
TDM related settings for ACP registers in hw_params. When TDM mode is enabled, Hw_params needs to read and write from/to respective TX/RX (ACP_(I2S/BT)TDM_(TX/RX)FRMT) registers. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1583751029-2850-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Kuninori Morimoto authored
We already have for_each_pcm_streams() macro. Let's use it. Signed-off-by:
-
- 06 Mar, 2020 15 commits
-
-
Mark Brown authored
Merge series "ASoC: soc-pcm cleanup step5" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v2 resend of soc-pcm cleanup step5. 1) - 4) are rebased to latest for-5.7 branch. 5) - 6) are remaked of previous [6/8], [7/8] which were mistaken patch. Kuninori Morimoto (6): 1) ASoC: soc-pcm: move dpcm_fe_dai_close() 2) ASoC: soc-pcm: add dpcm_fe_dai_cleanup() 3) ASoC: soc-pcm: use snd_soc_dai_get_pcm_stream() at dpcm_set_fe_runtime() 4) ASoC: soc-pcm: tidyup dulicate handing at dpcm_fe_dai_startup() 5) ASoC: soc-pcm: check DAI's activity more simply 6) ASoC: soc-pcm: Do Digital Mute for both CPU/Codec in same timing. sound/soc/soc-pcm.c | 97 ++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 50 deletions(-) -- 2.17.1
-
Mark Brown authored
We are currently using simple-audio-card on the Allwinner A64 SoC. The digital audio codec there (sun8i-codec) has 3 AIFs, one each for the CPU, the modem, and Bluetooth. Adding support for the secondary AIFs requires adding codec2codec DAI links. Since the modem and bt-sco codec DAI drivers only have one set of possible PCM parameters (namely, 8kHz mono S16LE), there's no real need for a machine driver to specify the DAI link configuration. The parameters for these "simple" DAI links can be chosen automatically. This series adds codec2codec DAI link support to simple-audio-card. Codec to codec links are automatically detected when all DAIs in the link belong to codec components. I tried to reuse as much code as possible, so the first two patches refactor a couple of helper functions to be more generic. The last patch adds the new feature and its documentation. Changes in v4: - Rebased on top of asoc/for-next, several changes to patch 2 - Removed unused variable from patch 3 Changes in v3: - Update use of for_each_rtd_components for v5.6 Changes in v2: - Drop patch 1 as it was merged - Automatically detect codec2codec links instead of using a DT property Samuel Holland (3): ALSA: pcm: Add a standalone version of snd_pcm_limit_hw_rates ASoC: pcm: Export parameter intersection logic ASoC: simple-card: Add support for codec2codec DAI links Documentation/sound/soc/codec-to-codec.rst | 9 +++- include/sound/pcm.h | 9 +++- include/sound/soc.h | 3 ++ sound/core/pcm_misc.c | 18 +++---- sound/soc/generic/simple-card-utils.c | 48 ++++++++++++++++++ sound/soc/soc-pcm.c | 59 ++++++++++++++-------- 6 files changed, 114 insertions(+), 32 deletions(-) -- 2.24.1
-
Mark Brown authored
Merge series "ASoC: wcd934x: minor fixes" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset has 1 fix and a header cleanup found during recent testing. Srinivas Kandagatla (2): ASoC: wcd934x: fix High Accuracy Buck enable ASoC: wcd934x: remove unused headers sound/soc/codecs/wcd934x.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) -- 2.21.0
-
Peter Ujfalusi authored
The runtime pointer has been taken in functional level so there is no need to take it again under the if () case. Fixes: 9d789dc0 ("ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200227093544.27723-1-peter.ujfalusi@ti.comSigned-off-by:
-
Kuninori Morimoto authored
Digital Mute for CPU is done at soc_pcm_close(), and Digital Mute for Codec is done at soc_pcm_hw_free(). It is just confusable. This patch do Digital Mute for both CPU/Codec in same timing. Then, it cares DAI activity Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_hw_free() want to call snd_soc_dai_digital_mute() if it was last user of Playback or Capture. bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; int playback_active = dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK]; int capture_active = dai->stream_active[SNDRV_PCM_STREAM_CAPTURE]; if ((playback && playback_active == 1) || (!playback && capture_active == 1)) snd_soc_dai_digital_mute(...) But it is same as int active = dai->stream_active[substream->stream]; if (active == 1) snd_soc_dai_digital_mute(...) This patch simplify the code. Signed-off-by:
-
Kuninori Morimoto authored
error handling at dpcm_fe_dai_startup() has duplicate code. This patch tidyup it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_soc_dai_get_pcm_stream(), let's use it Signed-off-by:
-
Kuninori Morimoto authored
dpcm_fe_dai_close() and error case of dpcm_fe_dai_open() need to do same cleanup operation. To avoid duplicate code, this patch adds dpcm_fe_dai_cleanup() and use it. Signed-off-by:
-
Kuninori Morimoto authored
move dpcm_fe_dai_close() next to dpcm_fe_dai_open(). This is prepare for dpcm_fe_dai_open() cleanup Signed-off-by:
-
Samuel Holland authored
Following the example in cb2cf0de ("ASoC: soc-core: care Codec <-> Codec case by non_legacy_dai_naming"), determine if a DAI link contains only codec DAIs by examining the non_legacy_dai_naming flag in each DAI's component. For now, we assume there is only one or a small set of valid PCM stream parameters, so num_params == 1 is good enough. We also assume that the same params are valid for all supported streams. params is set to the subset of parameters common among all DAIs, and then the existing code automatically chooses the highest quality of the remaining values when the link is brought up. Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200305051143.60691-4-samuel@sholland.orgSigned-off-by:
-
Samuel Holland authored
The logic to calculate the subset of stream parameters supported by all DAIs associated with a PCM stream is nontrivial. Export a helper function so it can be used to set up simple codec2codec DAI links. Signed-off-by:
-
Samuel Holland authored
It can be useful to derive min/max rates of a snd_pcm_hardware without having a snd_pcm_runtime, such as before constructing an ASoC DAI link. Create a new helper that takes a pointer to a snd_pcm_hardware directly, and refactor the original function as a wrapper around it, to avoid needing to update any call sites. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200305051143.60691-2-samuel@sholland.orgSigned-off-by:
-
Srinivas Kandagatla authored
Looks like there are some unused headers, remove them. Seems to be missed while moving to mfd. Reported-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200306132806.19684-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
High Accuracy buck is not applicable when we use RCO Band Gap source, so move it back to correct place. Signed-off-by:
-
- 05 Mar, 2020 4 commits
-
-
Kuninori Morimoto authored
dpcm_add_paths() checks returned be from dpcm_get_be() static int dpcm_add_paths(...) { ... for_each_dapm_widgets(list, i, widget) { ... be = dpcm_get_be(...); ... /* make sure BE is a real BE */ => if (!be->dai_link->no_pcm) continue; ... } ... } But, dpcm_get_be() itself is checking it already. dpcm_get_be(...) { ... for_each_card_rtds(card, be) { => if (!be->dai_link->no_pcm) continue; ... if (...) => return be; } return NULL } This patch removes duplicate check Signed-off-by: -
Kuninori Morimoto authored
Many functions defines "stream = substream->stream", but some of them is using "substream->stream" instead of "stream". It is pointless. This patch uses defined stream. Signed-off-by:
-
Baolin Wang authored
Change the config to 'tristate' for MCDT driver to allow it to build into modules, as well as changing to use IS_ENABLED() to validate if need supply dummy functions when building the MCDT driver as a module. Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/9306f2b99641136653ae4fe6cf9e859b7f698f77.1583387748.git.baolin.wang7@gmail.comSigned-off-by:
-
Dan Murphy authored
Fix the range verification check for the mic_bias and vref device tree entries. Fixes 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by:Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200304193427.16886-1-dmurphy@ti.comSigned-off-by:
-
- 04 Mar, 2020 4 commits
-
-
Mark Brown authored
Merge branch 'for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
-
Mark Brown authored
Merge branch 'for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
-
YueHaibing authored
gcc 7.4.0 build fails: In file included from sound/soc/amd/acp3x-rt5682-max9836.c:20:0: sound/soc/amd/raven/acp3x.h: In function rv_readl: sound/soc/amd/raven/acp3x.h:113:9: error: implicit declaration of function readl; did you mean rv_readl? [-Werror=implicit-function-declaration] return readl(base_addr - ACP3x_PHY_BASE_ADDRESS); ^~~~~ rv_readl sound/soc/amd/raven/acp3x.h: In function rv_writel: sound/soc/amd/raven/acp3x.h:118:2: error: implicit declaration of function writel; did you mean rv_writel? [-Werror=implicit-function-declaration] writel(val, base_addr - ACP3x_PHY_BASE_ADDRESS); ^~~~~~ rv_writel Add <linux/io.h> to fix this. Fixes: 6b8e4e7d ("ASoC: amd: Add machine driver for Raven based platform") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Message-Id: <20200304084057.44764-1-yuehaibing@huawei.com> Signed-off-by:
-
Olivier Moysan authored
The commit e894efef ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver. 1) DMA channel is not requested: With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called. Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card 2) DMA channel is not released: dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release(). devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem. Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Message-Id: <20200304102406.8093-1-olivier.moysan@st.com> Signed-off-by:
-
- 03 Mar, 2020 1 commit
-
-
Akshu Agrawal authored
Fixes: >> sound/soc//amd/acp3x-rt5682-max9836.c:341:23: warning: format '%d' >> expects argument of type 'int', but argument 3 has type 'long int' >> [-Wformat=] dev_err(&pdev->dev, "DMIC gpio failed err=%d\n", Reported-by:Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200303090444.95805-1-akshu.agrawal@amd.comSigned-off-by:
-
