- 15 Sep, 2009 40 commits
-
-
Bartlomiej Zolnierkiewicz authored
Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
Jim Lieb <lieb@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Bartlomiej Zolnierkiewicz authored
Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by:
-
Jim Lieb authored
Text only changes to remove textual differences between the vt6655 and vt6656 trees in prep for driver merge. Signed-off-by:
-
Jim Lieb authored
These changes in vt6656 match changes in vt6655 to minimize text differences prior to merging the two trees into a single driver source. Signed-off-by:
-
Jim Lieb authored
The vt6655 and vt6656 drivers are from a common origin but have drifted apart with minor textual differences. There are two changes: s/DEVICE_PRT/DBG_PRT/g and s/byPktTyp/byPktType/g This significantly reduces the differences between the two file sets in preparation to merging the common code. A few whitespace and text bits were also adjusted. Signed-off-by:
-
Jim Lieb authored
Fix compile problems with 64bit. These issues could cause corrupted address crashes. Cleanup definition use to use more portable kernel typedefs etc. Signed-off-by:
-
Jim Lieb authored
Fix compile problems with 64bit. These issues could cause corrupted address crashes. In the process, replaced some definitions to use more portable kernel types. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/staging/otus/usbdrv.h: linux/usb.h is included more than once. Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
-
Bill Pemberton authored
The parameter list for qt_open() was from the old non usb-serial driver. Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: use %td for ptrdiff: drivers/staging/udlfb/udlfb.h:209: warning: format '%d' expects type 'int', but argument 3 has type 'long int' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexander Beregalov authored
As the driver is in mainline now we can remove such dependencies. WIRELESS_EXT is 22 now. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Mike Galbraith authored
The rest of the known universe prefers wlanN for wireless interface names, to the point that some distro configuration tools, such as opensuse's Yast, don't even allow the user to enter a name, and simply pre-select "wlan". Signed-off-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Julia Lawall authored
dst_state_alloc returns an ERR_PTR value in an error case instead of NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = dst_state_alloc(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Stoyan Gaydarov authored
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/Signed-off-by:
Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by:
-
Julia Lawall authored
Correct priority problem in the use of ! and &. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ - !E & C + !(E & C) // </smpl> Signed-off-by:
-
Uwe Kleine-König authored
This patch was generated by running git grep -E -l 'man[ae]g?ment' drivers/staging | xargs -r perl -p -i -e 's/\bman[ae]g?ment\b/management/g' Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Shan Wei authored
Compared with other drivers, the "ret" should be nagative and returned. But in vhci_hdc, it always return 0; I dont't use the driver, and I'm not familiar with the code. Hope the patch is helpful. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Felipe Balbi authored
we need to get rid of those driver-specific error codes Signed-off-by:
Felipe Balbi <me@felipebalbi.com> Signed-off-by:
-
Felipe Balbi authored
Signed-off-by:
-
Felipe Balbi authored
Signed-off-by:
-
Felipe Balbi authored
Signed-off-by:
-
Brian G. Merrell authored
This includes fixes for all of the legit checkpatch.pl errors and warnings. I have also included several of the suggestions from the linux-kernel mailing list when the USB-IP code was first added. Signed-off-by:
Brian G. Merrell <bgmerrell@novell.com> Signed-off-by:
-
Julia Lawall authored
If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression lock1,lock2; expression flags; @@ *spin_lock_irqsave(lock1,flags) ... when != flags *spin_lock_irqsave(lock2,flags) // </smpl> Signed-off-by:
-
Pavel Machek authored
Check that SMBUS APIs are available in touchscreen driver. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Arve Hjønnevåg authored
Support for input devices connected to GPIO pins. This adds support for HTC Dream's keyboard and its trackball. Generic support already exists for keyboard on GPIO, but this one is more advanced because it can detect shadow key presses (and actually works with Dream :-). (It also contains Kconfig/Makefile changes, including some that were missing from previous commit. Sorry.) Signed-off-by:
-
Pavel Machek authored
Separate Kconfig/Makefile glue from dream into subdirectory. I plan to add few more drivers, and changing staging/Makefile each time sounds like inviting conflicts. Signed-off-by:
-
Jiri Slaby authored
In vfe_send_msg_no_payload there is a wrong struct vfe_message allocation. It allocates only sizeof(pointer to vfe_message) for a whole structure. Add a dereference to the sizeof to allocate sizeof(vfe_message). Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Acked-by:
-
Pavel Machek authored
This adds pointer to hardware documentation, and adds code comment from Arve. Signed-off-by:
-
Pavel Machek authored
This separates coefficient computation into separate function, so that main probe does not have 1001 variables, and is of a more reasonable size. Signed-off-by:
-
Pavel Machek authored
This is first part of touchscreen cleanups. I did not remove earlysuspend functionality for now (to help Google merge the changes). I mainly introduced helpers to reduce code duplication, and split huge functions into smaller ones. Signed-off-by:
-
Arve Hjønnevåg authored
This adds support for synaptic touchscreen, used in HTC dream cellphone. This is original version from Arve, fixed only to compile; I do have cleaner version, but I broken something inside, and this will preserve authorship better. I originally tried to push the driver directly to input/touchscreen, but the driver has some issues with interrupt handling that are more difficult to fix than I expected at first. Signed-off-by:
Arve Hjønnevåg <arve@android.com> Signed-off-by:
-
Pavel Machek authored
Limit SMD communication glue to MSM platform. It is closely tied to MSM architecture. Signed-off-by:
-
Greg Kroah-Hartman authored
Remove a few items that have already been resolved. There are only a few checkpatch issues, they need to be resolved by larger code logic changes that are not "simple" changes. Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: -
Bill Pemberton authored
List.h is no longer used and can be removed. Signed-off-by:
-
Bill Pemberton authored
The hv driver has it's own linked list routines. This removes them from RndisFilter.c Signed-off-by:
-
Bill Pemberton authored
The hv driver has it's own linked list routines. This removes them from more places in hv. Signed-off-by:
-
Bill Pemberton authored
The hv driver has it's own linked list routines. This removes them from NetVsc and uses the kernels routines instead. Signed-off-by:
-
Haiyang Zhang authored
Add Haiyang's email to the TODO file. Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
It's amazing the hoops that people go through to make code work when they don't opensource the whole thing. Passing these types of function pointers around for no good reason is a mess, this needs to be unwound as everything is now in the open. Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: -
Greg Kroah-Hartman authored
Come on people, it doesn't get simpler than this, why have a typedef for something so tiny... Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
