There is currently no way for a program scanning /sys to know whether a
network device is attached to a particular PHY device, just like the PHY
device is not pointed back to its attached network device.

Create a symbolic link in the network device's namespace named "phydev"
which points to the PHY device and create a symbolic link in the PHY
device's namespace named "attached_dev" that points back to the network
device. These links are set up during phy_attach_direct() and removed
during phy_detach() for symetry.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Roopa Prabhu says:

====================
net: extend RTM_GETROUTE to return fib result

This series adds a new RTM_F_FIB_MATCH flag to return matched fib result
with RTM_GETROUTE. This is useful for applications and protocols in
userspace wanting to query the selected route.

examples (with patched iproute2):
ipv4:
----
$ip route show
default via 192.168.0.2 dev eth0
10.0.14.0/24
        nexthop via 172.16.0.3  dev dummy0 weight 1
        nexthop via 172.16.1.3  dev dummy1 weight 1

$ip route get 10.0.14.2
10.0.14.2 via 172.16.1.3 dev dummy1  src 172.16.1.1
    cache

$ip route get fibmatch 10.0.14.2
10.0.14.0/24
        nexthop via 172.16.0.3  dev dummy0 weight 1
        nexthop via 172.16.1.3  dev dummy1 weight 1

ipv6:
----
$ip -6 route show
2001:db9:100::/120  metric 1024
        nexthop via 2001:db8:2::2  dev dummy0 weight 1
        nexthop via 2001:db8:12::2  dev dummy1 weight 1

$ip -6 route get 2001:db9:100::1
2001:db9:100::1 from :: via 2001:db8:12::2 dev dummy1  src 2001:db8:12::1  metric 1024  pref medium

$ip -6 route get fibmatch 2001:db9:100::1
2001:db9:100::/120  metric 1024
        nexthop via 2001:db8:12::2  dev dummy1 weight 1
        nexthop via 2001:db8:2::2  dev dummy0 weight 1

v2:
        - pick up new forward port of patch-01 from david
        - inet6_rtm_getroute: use container_of for rt6_info to
          dst conversion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support to return matched fib result when RTM_F_FIB_MATCH
flag is specified in RTM_GETROUTE request. This is useful for user-space
applications/controllers wanting to query a matching route.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support to return matched fib result when RTM_F_FIB_MATCH
flag is specified in RTM_GETROUTE request. This is useful for user-space
applications/controllers wanting to query a matching route.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This flag when specified will return matched fib result in
response to a RTM_GETROUTE query.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prefix is needed for returning matching route spec on get route request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert inet_rtm_getroute to use ip_route_input_rcu and
ip_route_output_key_hash_rcu passing the fib_result arg to both.
The rcu lock is held through the creation of the response, so the
rtable/dst does not need to be attached to the skb and is passed
to rt_fill_info directly.

In converting from ip_route_output_key to ip_route_output_key_hash_rcu
the xfrm_lookup_route in ip_route_output_flow is dropped since
flowi4_proto is not set for a route get request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_fill_info has 1 caller with the event set to RTM_NEWROUTE. Given that
remove the arg and use RTM_NEWROUTE directly in rt_fill_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A later patch wants access to the fib result on an input route lookup
with the rcu lock held. Refactor ip_route_input_noref pushing the logic
between rcu_read_lock ... rcu_read_unlock into a new helper that takes
the fib_result as an input arg.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A later patch wants access to the fib result on an output route lookup
with the rcu lock held. Refactor __ip_route_output_key_hash, pushing
the logic between rcu_read_lock ... rcu_read_unlock into a new helper
with the fib_result as an input arg.

To keep the name length under control remove the leading underscores
from the name and add _rcu to the name of the new helper indicating it
is called with the rcu read lock held.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: devlink port implementation

This series adds basic devlink support.  The operations we can perform
are port show and port split/unsplit.

v2:
Register devlink first, and then register all the ports.  Port {,un}split
searches the port list, which is protected by a mutex.  If port split
is requested before ports are registered we will simply not find the port
and return -EINVAL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring port split with devlink.  Add devlink
callbacks to validate requested config and call NSP helpers.
Getting the right nfp_port structure can be done with simple iteration.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For port splitting we will need to know the total number of lanes
in a port.  Calculate that based on eth_table information.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend nfp_port to contain devlink_port structures.  Register the
ports to allow users inspecting device ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon have to invoke more clean up for vNICs.
Move the cleanup callbacks into a helper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add initial devlink support.  This patch simply switches allocation
of per-adapter structure to devlink's priv and register devlink
with empty ops table.  See following patches for implementation
of particular ops.

We should now clear the app pointer on exit, this is how devlink
callbacks will know app is not initialized.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move mutex init to main file close to structure allocation.
This will allow mutex to be taken before net code runs (e.g.
from devlink callbacks).  While at it remember to destroy
the mutex.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Support firmware flash

Add support for device firmware flash on mlxsw spectrum. The firmware files
are expected to be in the Mellanox Firmware Archive version 2 (MFA2)
format.

The firmware flash is triggered on driver initialization time if the device
firmware version does not meet the minimum firmware version supported by
the driver.

Currently, to activate the newly flashed firmware, the user needs to
reboot his system.

The first patch introduces the mlxfw module, which implements common logic
needed for the firmware flash process on Mellanox products, such as the
MFA2 format parsing and the firmware flash state machine logic. As the
module implements common logic which will be needed by various different
Mellanox drivers, it defines a set of callbacks needed to interact with the
specific device.

Patches 1-5 implement the needed mlxfw callbacks in the mlxsw spectrum
driver.

Patches 6 and 7 add boot-time firmware upgrade on the mlxsw spectrum
driver.

Patch 8 adds a fix needed for new firmware versions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In new firmware versions, when configuring a {Port, VID} as a router
interface, the driver is responsible for enabling the STP filter and
disabling learning.  Otherwise, packets are discarded.

This change doesn't break existing firmware versions, but is required
for newer firmware versions.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the spectrum module check the current device firmware version, and if
it is below the supported version, use the libfirmware API to request a
firmware file with the supported firmware version and flash it to the
device using the mlxfw module.

The firmware file names are expected to be of Mellanox Firmware Archive
version 2 (MFA2) format and their name are expected to be in the following
pattern: "mlxsw_spectrum-<major>.<minor>.<sub-minor>.mfa2".
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This struct was previously an anonymous struct defined inside the
mlxsw_bus_info struct. Extract it to a struct named mlxsw_fw_rev, as it
will be needed later by the spectrum driver.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxfw module defines several needed callbacks in order to flash the
device's firmware. As the mlxfw module is shared between several different
drivers, those callbacks are the glue functionality that is responsible
for hardware interaction. Add those callbacks using the MCQI, MCC, MCDA
registers.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MCDA register allows reading and writing a firmware component.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MCC register allows controlling and querying the firmware flash state
machine (FSM).
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MCQI register queries information about firmware components. It will
be needed by the mlxfw module to query various options about the
components, such as their max size, alignment and max write size.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxfw module is in charge of common logic needed to flash Mellanox
devices firmware, which consists of:
 - Parse the Mellanox Firmware Archive version 2 (MFA2) format, which is
   the format used to store the Mellanox firmware. The MFA2 format file can
   hold firmware for many different silicon variants, differentiated by a
   unique ID called PSID. In addition, the MFA2 file data section is
   compressed using xz compression to save both file-system space and
   memory at extraction time.
 - Implement the firmware flash state machine logic, which is a common
   logic for Mellanox products needed to flash the firmware to the device.

As the module is shared between different Mellanox products, it defines a
set of callbacks to be implemented by the specific driver for hardware
interaction.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suresh Reddy says:

====================
be2net: patch-set

Hi Dave, Please consider applying these two patches to net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On certain platforms BE3 chips may indicate spurious UEs (unrecoverable
error). Because of the UE detection logic was disabled in the driver
for BE3 chips. Because of this, even in cases of a real UE,
a failover will not occur. This patch re-enables UE detection on BE3
and if a UE is detected, reads the POST register. If the POST register,
reports either a FAT_LOG_STATE or a ARMFW_UE, then it means that a valid
UE occurred in the chip.
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support network namespacing in AF_RXRPC with the following changes:

 (1) All the local endpoint, peer and call lists, locks, counters, etc. are
     moved into the per-namespace record.

 (2) All the connection tracking is moved into the per-namespace record
     with the exception of the client connection ID tree, which is kept
     global so that connection IDs are kept unique per-machine.

 (3) Each namespace gets its own epoch.  This allows each network namespace
     to pretend to be a separate client machine.

 (4) The /proc/net/rxrpc_xxx files are now called /proc/net/rxrpc/xxx and
     the contents reflect the namespace.

fs/afs/ should be okay with this patch as it explicitly requires the current
net namespace to be init_net to permit a mount to proceed at the moment.  It
will, however, need updating so that cells, IP addresses and DNS records are
per-namespace also.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes unused parameter from prb_curr_blk_in_use() method
in net/packet/af_packet.c.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Corentin Labbe says:

====================
net-next: stmmac: rework the speed selection

The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.

So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.

My first try was to create an adjust_link() in stmmac_ops but it duplicate some code

The current solution is to have direct value for 10/100/1000 and a mask for them.

The first 4 patchs fix some minor problem found in stmmac_adjust_link() and reported by Florian Fainelli in my previous serie.
The last patch is the real work.

This series is tested on cubieboard2 (dwmac1000) and opipc (dwmac-sun8i).

Changes since v3:
- Added the patch #4 "Convert old_link to bool" as suggested by Joe Perches
- Changed the speedmask

Changes since v2:
- Use true/false for new_state in patch #1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.

So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.

So this patch replace speed/port by simpler
speed10/speed100/speed1000/speed_mask variables.

In dwmac4_core_init and dwmac1000_core_init, port/speed value was used
directly without using the struct link. This patch convert also their
usage to speedxxx.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch convert old_link from int to bool since it store only 1 or 0
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch convert new_state from int to bool since it store only 1 or 0
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The functions jme_restart_tx_engine(), jme_pause_rx() and
jme_resume_rx() are not used. Removing them fixes the following warnings
when building with clang:

drivers/net/ethernet/jme.c:694:1: error: unused function
    'jme_restart_tx_engine' [-Werror,-Wunused-function]

drivers/net/ethernet/jme.c:2393:20: error: unused function
    'jme_pause_rx' [-Werror,-Wunused-function]

drivers/net/ethernet/jme.c:2406:20: error: unused function
    'jme_resume_rx' [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-05-23

Here's the first Bluetooth & 802.15.4 pull request targeting the 4.13
kernel release.

 - Bluetooth 5.0 improvements (Data Length Extensions and alternate PHY)
 - Support for new Intel Bluetooth adapter [[8087:0aaa]
 - Various fixes to ieee802154 code
 - Various fixes to HCI UART code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit af6b6967 ("net: phy: export genphy_config_init()") introduced
this EXPORT_SYMBOL and put it after gen10g_soft_reset() instead of
directly after genphy_config_init. Probably this happend when the patch
was applied because http://patchwork.ozlabs.org/patch/339622/ looks ok.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>