- 10 May, 2010 1 commit
-
-
Johannes Berg authored
When we kick off a firmware loading process, and then unbind from the pci device right away, we get into trouble. Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in iwl_pci_remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
- 07 May, 2010 2 commits
-
-
Reinette Chatre authored
In https://bugzilla.kernel.org/show_bug.cgi?id=15794 a user encountered the following: [18967.469098] wlan0: authenticated [18967.472527] wlan0: associate with 00:1c:10:b8:e3:ea (try 1) [18967.472585] wlan0: deauthenticating from 00:1c:10:b8:e3:ea by local choice (reason=3) [18967.672057] wlan0: associate with 00:1c:10:b8:e3:ea (try 2) [18967.872357] wlan0: associate with 00:1c:10:b8:e3:ea (try 3) [18968.072960] wlan0: association with 00:1c:10:b8:e3:ea timed out [18968.076890] ------------[ cut here ]------------ [18968.076898] WARNING: at net/wireless/mlme.c:341 cfg80211_send_assoc_timeout+0xa8/0x140() [18968.076900] Hardware name: GX628 [18968.076924] Pid: 1408, comm: phy0 Not tainted 2.6.34-rc4-00082-g250541fc-dirty #3 [18968.076926] Call Trace: [18968.076931] [<ffffffff8103459e>] ? warn_slowpath_common+0x6e/0xb0 [18968.076934] [<ffffffff8157c2d8>] ? cfg80211_send_assoc_timeout+0xa8/0x140 [18968.076937] [<ffffffff8103ff8b>] ? mod_timer+0x10b/0x180 [18968.076940] [<ffffffff8158f0fc>] ? ieee80211_assoc_done+0xbc/0xc0 [18968.076943] [<ffffffff81590d53>] ? ieee80211_work_work+0x553/0x11c0 [18968.076945] [<ffffffff8102d931>] ? finish_task_switch+0x41/0xb0 [18968.076948] [<ffffffff81590800>] ? ieee80211_work_work+0x0/0x11c0 [18968.076951] [<ffffffff810476fb>] ? worker_thread+0x13b/0x210 [18968.076954] [<ffffffff8104b6b0>] ? autoremove_wake_function+0x0/0x30 [18968.076956] [<ffffffff810475c0>] ? worker_thread+0x0/0x210 [18968.076959] [<ffffffff8104b21e>] ? kthread+0x8e/0xa0 [18968.076962] [<ffffffff810031f4>] ? kernel_thread_helper+0x4/0x10 [18968.076964] [<ffffffff8104b190>] ? kthread+0x0/0xa0 [18968.076966] [<ffffffff810031f0>] ? kernel_thread_helper+0x0/0x10 [18968.076968] ---[ end trace 8aa6265f4b1adfe0 ]--- As explained by Johannes Berg <johannes@sipsolutions.net>: We authenticate successfully, and then userspace requests association. Then we start that process, but the AP doesn't respond. While we're still waiting for an AP response, userspace asks for a deauth. We do the deauth, but don't abort the association work. Then once the association work times out we tell cfg80211, but it no longer wants to know since for all it is concerned we accepted the deauth that also kills the association attempt. Fix this by, upon receipt of deauth request, removing the association work and continuing to send the deauth. Unfortunately the user reporting the issue is not able to reproduce this problem anymore and cannot verify this fix. This seems like a well understood issue though and I thus present the patch. Bug-identified-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch fixes a regression introduced by the following patch: "ar9170: load firmware asynchronously" When we kick off a firmware loading request and then unbind, or disconnect the usb device right away, we get into trouble: > ------------[ cut here ]------------ > WARNING: at lib/kref.c:44 kref_get+0x1c/0x20() > Hardware name: 18666GU > Modules linked in: ar9170usb [...] > Pid: 6588, comm: firmware/ar9170 Not tainted 2.6.34-rc5-wl #43 > Call Trace: > [<c102b05e>] ? warn_slowpath_common+0x6e/0xb0 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c102b0b3>] ? warn_slowpath_null+0x13/0x20 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c117bb2f>] ? kobject_get+0xf/0x20 > [<c124d630>] ? get_device+0x10/0x20 > [<c124e5a0>] ? device_add+0x60/0x530 > [<c117b8b5>] ? kobject_init+0x25/0xa0 > [<c12569f9>] ? _request_firmware+0x139/0x3e0 > [<c1256cc0>] ? request_firmware_work_func+0x20/0x70 > [<c1256ca0>] ? request_firmware_work_func+0x0/0x70 > [<c103ff24>] ? kthread+0x74/0x80 > [<c103feb0>] ? kthread+0x0/0x80 > [<c1003136>] ? kernel_thread_helper+0x6/0x10 >---[ end trace 2d50bd818f64a1b7 ]--- - followed by a random Oops - Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in ar9170_usb_disconnect. Reported-by: Johannes Berg <johannes@sipsolutions.net> Bug-fixed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 30 Apr, 2010 1 commit
-
-
Johannes Berg authored
Some firmware versions don't behave properly when passive scanning is requested on radar channels without enabling active scanning on receiving a good frame. Work around that issue by asking the firmware to only enable the active scanning after receiving a huge number of good frames, a number that can never be reached during our dwell time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
- 26 Apr, 2010 1 commit
-
-
Hans de Goede authored
Hans de Goede identified a bug in p54p_check_tx_ring: there are two ring indices. 1 => tx data and 3 => tx management. But the old code had a constant "1" and this resulted in spurious dma unmapping failures. Cc: stable@kernel.org Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623Bug-Identified-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 19 Apr, 2010 2 commits
-
-
Reinette Chatre authored
Since "mac80211: make off-channel work generic" drivers have not been notified of configuration changes after association or authentication. This caused more dependence on current state to ensure driver will be notified when configuration changes occur. One such problem arises if off-channel is in progress when HT information changes. Since HT is only enabled on the "oper_channel" the driver will never be notified of this change. Usually the driver is notified soon after of a BSS information change (BSS_CHANGED_HT) ... but since the driver did not get a notification that this is a HT channel the new BSS information does not make sense. Fix this by also changing the off-channel information when HT is enabled and thus cause driver to be notified correctly. This fixes a problem in 4965 when associated with 5GHz 40MHz channel. Without this patch the system can associate but is unable to transfer any data, not even ping. See http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2158Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When the addba timer expires but has no work to do, it should not affect the state machine. If it does, TX will not see the successfully established and we can also crash trying to re-establish the session. Cc: stable@kernel.org [2.6.32, 2.6.33] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 16 Apr, 2010 2 commits
-
-
Shanyu Zhao authored
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
Johannes Berg authored
When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
- 09 Apr, 2010 1 commit
-
-
Johannes Berg authored
The current algorithm will sometimes "detect" that more chains are enabled than are really present in the device because, for unknown reasons, the ucode sends up all-zeroes signal values. The simplest way of solving this is to restrict the active chains mask to the chains we know are really present on the device. This fixes a bug with some devices where, since sometimes more chains are enabled than really present, the system would hang. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
- 08 Apr, 2010 1 commit
-
-
Wey-Yi Guy authored
For 4965, need to check it is valid qos frame before free, only valid QoS frame has the tid used to free the packets. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 06 Apr, 2010 3 commits
-
-
Felix Fietkau authored
With the enable_radio being uninitialized, ath_radio_enable() might be called twice, which can leave some hardware in an undefined state. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The new RCU lockdep support warns about these in some contexts -- make it aware of the locks used to protect all this. Different locks are used in different contexts which unfortunately means we can't get perfect checking. Also remove rcu_dereference() from two places that don't actually dereference the pointers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
This fixes the problem introduced in commit 84040805 which broke mesh peer link establishment. changes: v2 Added missing break (Johannes) v3 Broke original patch into two (Johannes) Signed-off-by: Javier Cardona <javier@cozybit.com> Cc: stable@kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 02 Apr, 2010 3 commits
-
-
Zhu Yi authored
We used to free all the Tx queues memory when interface is brought down and reallocate them again in interface up. This requires order-4 allocation for txq->cmd[]. In situations like s2ram, this usually leads to allocation failure in the memory subsystem. The patch fixed this problem by allocating the Tx queues memory only at the first time. Later iwl_down/iwl_up only initialize but don't free and reallocate them. The memory is freed at the device removal time. BTW, we have already done this for the Rx queue. This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15551Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
Shanyu Zhao authored
When collecting tx data for non-aggregation packets in rate scaling, if the tx data matches "other table", it still uses current table to update the stats and calculate average throughput in function rs_collect_tx_data(). This can mess up the rate scaling data structure and cause a kernel panic in a BUG_ON statement in rs_rate_scale_perform(). To fix this bug, we pass table pointer instead of window pointer (pointed to by table pointer) to function rs_collect_tx_data() so that the table being used is consistent. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Henry Zhang <hongx.c.zhang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
Zhu Yi authored
Below warning is triggered sometimes at module removal time when CONFIG_DMA_API_DEBUG is enabled. This should be caused by we didn't unmap pending commands (enqueued, but no complete notification received) for the Tx command queue. [ 1583.107469] ------------[ cut here ]------------ [ 1583.107539] WARNING: at lib/dma-debug.c:688 dma_debug_device_change+0x13c/0x180() [ 1583.107617] Hardware name: ... [ 1583.107664] pci 0000:04:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] [ 1583.107713] Modules linked in: ... [ 1583.111661] Pid: 16970, comm: modprobe Tainted: G W 2.6.34-rc1-wl #33 [ 1583.111727] Call Trace: [ 1583.111779] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111833] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111908] [<c0138e11>] warn_slowpath_common+0x71/0xd0 [ 1583.111963] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.112016] [<c0138ebb>] warn_slowpath_fmt+0x2b/0x30 [ 1583.112086] [<c02a281c>] dma_debug_device_change+0x13c/0x180 [ 1583.112142] [<c03e6c33>] notifier_call_chain+0x53/0x90 [ 1583.112198] [<c03e1ebe>] ? down_read+0x6e/0x90 [ 1583.112271] [<c015b229>] __blocking_notifier_call_chain+0x49/0x70 [ 1583.112326] [<c015b26f>] blocking_notifier_call_chain+0x1f/0x30 [ 1583.112380] [<c031931c>] __device_release_driver+0x8c/0xa0 [ 1583.112451] [<c03193bf>] driver_detach+0x8f/0xa0 [ 1583.112538] [<c0318382>] bus_remove_driver+0x82/0x100 [ 1583.112595] [<c0319ad9>] driver_unregister+0x49/0x80 [ 1583.112671] [<c024feb2>] ? sysfs_remove_file+0x12/0x20 [ 1583.112727] [<c02aa292>] pci_unregister_driver+0x32/0x80 [ 1583.112791] [<fc13a3c1>] iwl_exit+0x12/0x19 [iwlagn] [ 1583.112848] [<c017940a>] sys_delete_module+0x15a/0x210 [ 1583.112870] [<c015a5db>] ? up_read+0x1b/0x30 [ 1583.112893] [<c029600c>] ? trace_hardirqs_off_thunk+0xc/0x10 [ 1583.112924] [<c0295ffc>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 1583.112947] [<c03e6a1f>] ? do_page_fault+0x1ff/0x3c0 [ 1583.112978] [<c03e36f6>] ? restore_all_notrace+0x0/0x18 [ 1583.113002] [<c016aa70>] ? trace_hardirqs_on_caller+0x20/0x190 [ 1583.113025] [<c0102d58>] sysenter_do_call+0x12/0x38 [ 1583.113054] ---[ end trace fc23e059cc4c2ced ]--- Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
- 30 Mar, 2010 15 commits
-
-
Daniel Mack authored
The libertas driver calls wiphy_unregister() without a prior wiphy_register() when a devices fails initialization. Fix this by introducing a private flag. [ 9.310000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] [ 9.330000] [<c0311310>] (wiphy_unregister+0xfc/0x19c) from [<bf00c9ec>] (lbs_cfg_free+0x70/0x9c [libertas]) [ 9.330000] [<bf00c9ec>] (lbs_cfg_free+0x70/0x9c [libertas]) from [<bf014fdc>] (lbs_remove_card+0x180/0x210 [libertas]) [ 9.330000] [<bf014fdc>] (lbs_remove_card+0x180/0x210 [libertas]) from [<bf035394>] (if_sdio_probe+0xdc4/0xef4 [libertas_sdio]) [ 9.330000] [<bf035394>] (if_sdio_probe+0xdc4/0xef4 [libertas_sdio]) from [<c0230d14>] (sdio_bus_probe+0xd4/0xf0) [ 9.330000] [<c0230d14>] (sdio_bus_probe+0xd4/0xf0) from [<c01a6034>] (driver_probe_device+0xa4/0x174) [ 9.330000] [<c01a6034>] (driver_probe_device+0xa4/0x174) from [<c01a6164>] (__driver_attach+0x60/0x84) [ 9.330000] [<c01a6164>] (__driver_attach+0x60/0x84) from [<c01a5854>] (bus_for_each_dev+0x4c/0x8c) [ 9.330000] [<c01a5854>] (bus_for_each_dev+0x4c/0x8c) from [<c01a50e4>] (bus_add_driver+0xa0/0x228) [ 9.330000] [<c01a50e4>] (bus_add_driver+0xa0/0x228) from [<c01a6470>] (driver_register+0xc0/0x150) [ 9.330000] [<c01a6470>] (driver_register+0xc0/0x150) from [<bf03a06c>] (if_sdio_init_module+0x6c/0x108 [libertas_sdio]) [ 9.330000] [<bf03a06c>] (if_sdio_init_module+0x6c/0x108 [libertas_sdio]) from [<c00263ac>] (do_one_initcall+0x5c/0x1bc) [ 9.330000] [<c00263ac>] (do_one_initcall+0x5c/0x1bc) from [<c0069f80>] (sys_init_module+0xc0/0x1f0) [ 9.330000] [<c0069f80>] (sys_init_module+0xc0/0x1f0) from [<c0026f00>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Bing Zhao <bzhao@marvell.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
IWL_RATE_COUNT is 13 and IWL_RATE_COUNT_LEGACY is 12. IWL_RATE_COUNT_LEGACY is the right one here because iwl3945_rates doesn't support 60M and also that's how "rates" is defined in iwlcore_init_geos() from drivers/net/wireless/iwlwifi/iwl-core.c. rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY), GFP_KERNEL); Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable@kernel.org Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Valentin Longchamp authored
An int urb is constructed but we fill it in with a bulk pipe type. Commit f661c6f8 implemented a pipe type check when CONFIG_USB_DEBUG is enabled. The check failed for all the ar9170 usb transfers and the driver could not configure the wifi dongle. This went unnoticed until now because most people don't have CONFIG_USB_DEBUG enabled. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Stable <stable@kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
Recent bug reports have shown that rt2500usb also suffers from the powersave problems that the PCI rt2x00 drivers suffer from. So disable powersaving by default for rt2500usb as well. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Shanyu Zhao authored
Previously in interrupt handling tasklet, iwlwifi driver only clear/ack those interrupts that are enabled by the driver through inta_mask. If the hardware generates unattended interrupts, driver will not ack them, defeating the interrupt coalescing feature. This results in high number of interrupts per second and high CPU utilization. This patch addresses this issue by acking those unattended interrupts in the tasklet. Local test showed an order of magnitude improvement in terms of the number of interrupts without sacrificing networking throughput. This is a workaround for hardware issue. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
-
Wey-Yi Guy authored
Forget one hunk in 4965 during "iwlwifi: error checking for number of tfds in queue" patch. Reported-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org
-
Reinette Chatre authored
Commit "cfg80211: convert bools into flags" mistakenly modified iwlwifi's regulatory settings instead of just converting it. Fix this. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2172Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org
-
Johannes Berg authored
"mac80211: fix skb buffering issue" still left a race between enabling the hardware queues and the virtual interface queues. In hindsight it's totally obvious that enabling the netdev queues for a hardware queue when the hardware queue is enabled is wrong, because it could well possible that we can fill the hw queue with packets we already have pending. Thus, we must only enable the netdev queues once all the pending packets have been processed and sent off to the device. In testing, I haven't been able to trigger this race condition, but it's clearly there, possibly only when aggregation is being enabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hans de Goede authored
Thanks to Chris Chabot for giving his old wireless usb dongle to me to test it under Linux. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Benjamin Larsson authored
Signed-off-by: Benjamin Larsson <banan@ludd.ltu.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Konrath authored
This patch adds support for the NEC WL300NU-G USB wifi dongle. Signed-off-by: Ben Konrath <ben@bagu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Porsch, Marco authored
1st) a PREQ should only be processed, if it has the same SN and better metric (instead of better or equal). 2nd) next_hop[ETH_ALEN] now actually used to buffer mpath->next_hop->sta.addr for use out of lock. Signed-off-by: Marco Porsch <marco.porsch@siemens.com> Acked-by: Javier Cardona <javier@cozybit.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Stanse discovered that kmalloc is being called with GFP_KERNEL while holding this spinlock. The spinlock can be a mutex instead, which also enables the removal of the unlock/lock around the lock/unlock of cfg80211_mutex and the call to set_regdom. Reported-by: Jiri Slaby <jirislaby@gmail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 16 Mar, 2010 3 commits
-
-
Adel Gadllah authored
Commit a239a8b4 introduced a noisy message, that fills up the log very fast. The error seems not to be fatal (the connection is stable and performance is ok), so make it IWL_DEBUG_TX rather than IWL_ERR. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable@kernel.org Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When I initially stumbled upon sequence number problems with PAE frames in ath9k, I submitted a patch to remove all special cases for PAE frames and let them go through the normal transmit path. Out of concern about crypto incompatibility issues, this change was merged instead: commit 6c8afef5 Author: Sujith <Sujith.Manoharan@atheros.com> Date: Tue Feb 9 10:07:00 2010 +0530 ath9k: Fix sequence numbers for PAE frames After a lot of testing, I'm able to reliably trigger a driver crash on rekeying with current versions with this change in place. It seems that the driver does not support sending out regular MPDUs with the same TID while an A-MPDU session is active. This leads to duplicate entries in the TID Tx buffer, which hits the following BUG_ON in ath_tx_addto_baw(): index = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno); cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1); BUG_ON(tid->tx_buf[cindex] != NULL); I believe until we actually have a reproducible case of an incompatibility with another AP using no PAE special cases, we should simply get rid of this mess. This patch completely fixes my crash issues in STA mode and makes it stay connected without throughput drops or connectivity issues even when the AP is configured to a very short group rekey interval. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Grazvydas Ignotas authored
In case debugfs does not init for some reason (or is disabled on older kernels) driver does not allocate stats.fw_stats structure, but tries to clear it later and trips on a NULL pointer: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at __memzero+0x24/0x80 Backtrace: [<bf0ddb88>] (wl1251_debugfs_reset+0x0/0x30 [wl1251]) [<bf0d6a2c>] (wl1251_op_stop+0x0/0x12c [wl1251]) [<bf0bc228>] (ieee80211_stop_device+0x0/0x74 [mac80211]) [<bf0b0d10>] (ieee80211_stop+0x0/0x4ac [mac80211]) [<c02deeac>] (dev_close+0x0/0xb4) [<c02deac0>] (dev_change_flags+0x0/0x184) [<c031f478>] (devinet_ioctl+0x0/0x704) [<c0320720>] (inet_ioctl+0x0/0x100) Add a NULL pointer check to fix this. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 10 Mar, 2010 5 commits
-
-
Eric Dumazet authored
Fix memory leak and use kmalloc() instead of kzalloc() as we are going to overwrite the allocated buffer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
Currently hardware with !IEEE80211_HW_PS_NULLFUNC_STACK and IEEE80211_HW_REPORTS_TX_ACK_STATUS will never enter PSM due to the conditions in the power save entry functions. Fix those conditions. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Zhu Yi authored
Fixed below compiler warning: drivers/net/wireless/ipw2x00/ipw2200.c: In function ‘ipw_load_firmware’: drivers/net/wireless/ipw2x00/ipw2200.c:3260: warning: the frame size of 1168 bytes is larger than 1024 bytes Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bruno Randolf authored
we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>