- 19 Sep, 2014 32 commits
-
-
Tom Herbert authored
This patch changes IP tunnel to support (secondary) encapsulation, Foo-over-UDP. Changes include: 1) Adding tun_hlen as the tunnel header length, encap_hlen as the encapsulation header length, and hlen becomes the grand total of these. 2) Added common netlink define to support FOU encapsulation. 3) Routines to perform FOU encapsulation. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Implement fou_gro_receive and fou_gro_complete, and populate these in the correponsing udp_offloads for the socket. Added ipproto to udp_offloads and pass this from UDP to the fou GRO routine in proto field of napi_gro_cb structure. Signed-off-by:
-
Tom Herbert authored
This patch provides a receive path for foo-over-udp. This allows direct encapsulation of IP protocols over UDP. The bound destination port is used to map to an IP protocol, and the XFRM framework (udp_encap_rcv) is used to receive encapsulated packets. Upon reception, the encapsulation header is logically removed (pointer to transport header is advanced) and the packet is reinjected into the receive path with the IP protocol indicated by the mapping. Netlink is used to configure FOU ports. The configuration information includes the port number to bind to and the IP protocol corresponding to that port. This should support GRE/UDP (http://tools.ietf.org/html/draft-yong-tsvwg-gre-in-udp-encap-02), as will as the other IP tunneling protocols (IPIP, SIT). Signed-off-by:
-
Tom Herbert authored
Want to be able to use these in foo-over-udp offloads, etc. Signed-off-by:
-
John Fastabend authored
tc_u32_sel 'sel' in tc_u_knode expects to be the last element in the structure and pads the structure with tc_u32_key fields for each key. kzalloc(sizeof(*n) + s->nkeys*sizeof(struct tc_u32_key), GFP_KERNEL) CC: Eric Dumazet <edumazet@google.com> Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
pfifo_fast and htb use skb lists, without needing their spinlocks. (They instead use the standard qdisc lock) We can use __skb_queue_head_init() instead of skb_queue_head_init() to be consistent. Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: Support new Multi-function modes This patch series adds support for 2 new Multi-function modes - Unified Fabric Port [UFP] as well as nic partitioning 1.5 [NPAR1.5]. With the addition of the new multi-function modes, the series also revises some of the storage-related multi-function macros. [Do notice this series has several small issues with checkpatch] ==================== Signed-off-by: -
Yuval Mintz authored
When using new Multi-function modes it's possible that due to incompatible configuration management FW will fallback into an existing mode. Notice that at the moment this fallback is exactly the same as the already existing switch-independent multi-function mode, but we still use existing infrastructure to hold this information [in case some small differences will arise in the future]. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by:
-
Dmitry Kravkov authored
Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: Broadcom BCM7xxx PHY workaround update This patch sets the change to of_phy_connect() that you have seen before, this time with the full context of why it is useful and applicable here. Due to some design decision, the internal PHY on Broadcom BCM7xxx chips is not entirely self contained and does not report its internal revision through MII_PHYSID2, that is left to external PHY designs. This forces us to get the PHY revision from the GENET and SF2 switch drivers because those two peripherals integrate such a PHY and do contain the PHY revision in their registers. The approach taken here is hopefully easy to extend to similar needs for other chips/ as well. ==================== Signed-off-by: -
Florian Fainelli authored
Now that the GENET and SF2 drivers have been updated to communicate us what is the revision of the BCM7xxx integrated PHY, utilize that information in the config_init() callback to call into the appropriate workaround function based on our revision. While at it, we also print the revision and patch level to help debug new chips. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The integrated BCM7xxx PHY contains no useful revision information in its MII_PHYSID2 bits 3:0, that information is instead contained in the SWITCH_REG_PHY_REVISION register. Read this register, store its value, and return it by implementing the dsa_switch::get_phy_flags() callback accordingly. The register layout is already matching what the BCM7xxx PHY driver is expecting to find. Signed-off-by:
-
Florian Fainelli authored
Some switch drivers (e.g: bcm_sf2) may have to communicate specific workarounds or flags towards the PHY device driver. Allow switches driver to be delegated that task by introducing a get_phy_flags() callback which will do just that. Signed-off-by:
-
Florian Fainelli authored
The integrated BCM7xxx PHY contains no useful revision information in its MII_PHYSID2 bits 3:0, that information is instead contained in the GENET hardware block. We already read the GENET 32-bit revision register, so store the integrated PHY revision in the driver private structure, and then communicate this revision value to the PHY driver by overriding the phy_flags value. Signed-off-by:
-
Florian Fainelli authored
Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we can remove it from the GENET driver and the broadcom shared header file. The PHY driver checks the PHY supported bitmask instead. Signed-off-by:
-
Florian Fainelli authored
There is no need for the PHY driver to check PHY_BRCM_100MBPS_WAR since that is redundant with checking the PHY device supported features. Get rid of that workaround flag. Signed-off-by:
-
Florian Fainelli authored
The Broadcom BCM7xxx internal PHYs do not contain any useful revision information in the low 4-bits of their MII_PHYSID2 (MII register 3) which could allow us to properly identify them. As a result, we need the actual hardware block integrating these PHYs: GENET or the SF2 switch to tell us what revision they are built with. To assist with that, add two helper macros for fetching the the PHY revision and patch level from the struct phy_device::dev_flags. Signed-off-by:
-
Florian Fainelli authored
Commit f9a8f83b ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") removed the flags argument to the PHY library calls to: phy_{attach,connect,connect_direct}. Most Device Tree aware drivers call of_phy_connect() with the flag argument set to 0, but some of them might want to set a different value there in order for the PHY driver to key a specific behavior based on the phy_device::phy_flags value. Allow such drivers to set custom phy_flags as part of the of_phy_connect() call since of_phy_connect() does start the PHY state machine, it will call into the PHY driver config_init() callback which is usually where a specific phy_flags value is important. Fixes: f9a8f83b ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") Signed-off-by:
-
Eric Dumazet authored
Extract from sock_alloc_send_pskb() code building skb with frags, so that we can reuse this in other contexts. Intent is to use it from tcp_send_rcvq(), tcp_collapse(), ... We also want to replace some skb_linearize() calls to a more reliable strategy in pathological cases where we need to reduce number of frags. Signed-off-by:
-
Eric Dumazet authored
Now we no longer rely on having tcp headers for skbs in receive queue, tcp repair do not need to build fake ones. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
David S. Miller authored
Andy Zhou says: ==================== Refactor vxlan and l2tp to use new common UDP tunnel APIs This patch series add a few more UDP tunnel APIs and refactoring current UDP tunnel based protocols, vxlan and l2tp to make use of the new APIs. The added APIs are setup_udp_tunnel_sock(), udp_tunnel_xmit_skb() and udp_tunnel_sock_release(). Those implementation logics already exist in current vxlan and l2tp implementation. Move them to common APIs to reduce code duplications. Also split udp_tunnel.c into net/ipv4/udp_tunnel.c and net/ipv6/ip6_udp_tunnel.c to maintain proper IP protocol separation. ==================== Signed-off-by: -
Andy Zhou authored
Simplify l2tp implementation using common UDP tunnel APIs. Signed-off-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
-
Andy Zhou authored
Simplify vxlan implementation using common UDP tunnel APIs. Signed-off-by:
-
Andy Zhou authored
Added a few more UDP tunnel APIs that can be shared by UDP based tunnel protocol implementation. The main ones are highlighted below. setup_udp_tunnel_sock() configures UDP listener socket for receiving UDP encapsulated packets. udp_tunnel_xmit_skb() and upd_tunnel6_xmit_skb() transmit skb using UDP encapsulation. udp_tunnel_sock_release() closes the UDP tunnel listener socket. Signed-off-by:
-
Andy Zhou authored
Add ip6_udp_tunnel.c for ipv6 UDP tunnel functions to avoid ifdefs in udp_tunnel.c Signed-off-by:
-
David S. Miller authored
Frank Li says: ==================== net: fec: add interrupt coalescence improve error handle when parse queue number. add interrupt coalescence feature. Change from v2 to v3 - add error check in fec_enet_set_coalesce - fix a run time warning to get clock rate in interrupt - fix commit message use TKT number Change from v1 to v2 - fix indention - use errata number instead of TKT ==================== Signed-off-by: -
Fugang Duan authored
When enable three queues on imx6sx enet, and then do tx performance test with iperf tool, after some time running, tx hang. Found that: If uDMA is running, software set TDAR may cause tx hang. If uDMA is in idle, software set TDAR don't cause tx hang. There is a TDAR race condition for mutliQ when the software sets TDAR and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). This will cause the udma_tx and udma_tx_arbiter state machines to hang. The issue exist at i.MX6SX enet IP. So, the Workaround is checking TDAR status four time, if TDAR cleared by hardware and then write TDAR, otherwise don't set TDAR. The patch is only one Workaround for the issue ERR007885. Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
Frank Li <Frank.Li@freescale.com> Signed-off-by:
-
Fugang Duan authored
when enable interrupt coalesce, 8 BD is not enough. Signed-off-by:
-
Fugang Duan authored
i.MX6 SX support interrupt coalescence feature By default, init the interrupt coalescing frame count threshold and timer threshold. Supply the ethtool interfaces as below for user tuning to improve enet performance: rx_max_coalesced_frames rx_coalesce_usecs tx_max_coalesced_frames tx_coalesce_usecs Signed-off-by:
-
Frank Li authored
check tx and rx queue seperately. fix typo, "Invalidate" and "fail". change pr_err to pr_warn. Signed-off-by:
-
Alexei Starovoitov authored
commit 233577a2 ("net: filter: constify detection of pkt_type_offset") allows us to implement simple PKTTYPE support in sparc JIT Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
- 16 Sep, 2014 8 commits
-
-
Frank Li authored
reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross git checkout 4d494cdc make.cross ARCH=m68k m5272c3_defconfig make.cross ARCH=m68k drivers/net/ethernet/freescale/fec.h:262:0: warning: "FEC_R_DES_START" redefined #define FEC_R_DES_START(X) ((X == 1) ? FEC_R_DES_START_1 : \ ^ drivers/net/ethernet/freescale/fec.h:158:0: note: this is the location of the previous definition #define FEC_R_DES_START 0x3d0 /* Receive descriptor ring */ ^ drivers/net/ethernet/freescale/fec.h:265:0: warning: "FEC_X_DES_START" redefined #define FEC_X_DES_START(X) ((X == 1) ? FEC_X_DES_START_1 : \ ... Signed-off-by:
-
John Fastabend authored
This ensures the tcf_exts_init() is called for all cases. Fixes: 952313bd ("net: sched: cls_cgroup use RCU") Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitchDavid S. Miller authored
Pravin B Shelar says: ==================== Open vSwitch Following patches adds recirculation and hash action to OVS. First patch removes pointer to stack object. Next three patches does code restructuring which is required for last patch. Recirculation implementation is changed, according to comments from David Miller, to avoid using recursive calls in OVS. It is using queue to record recirc action and deferred recirc is executed at the end of current actions execution. v1-v2: Changed subsystem name in subject to openvswitch v2-v3: Added patch to remove pkt_key pointer from skb->cb. ==================== Signed-off-by: -
John Fastabend authored
When allocating a new structure we also need to call tcf_exts_init to initialize exts. A follow up patch might be in order to remove some of this code and do tcf_exts_assign(). With this we could remove the tcf_exts_init/tcf_exts_change pattern for some of the classifiers. As part of the future tcf_actions RCU series this will need to be done. For now fix the call here. Fixes e35a8ee5 ("net: sched: fw use RCU") Signed-off-by:
-
John Fastabend authored
tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master head: 54996b52 commit: c7953ef2 [625/646] net: sched: cls_cgroup use RCU net/sched/cls_cgroup.c:130 cls_cgroup_change() warn: possible memory leak of 'new' net/sched/cls_cgroup.c:135 cls_cgroup_change() warn: possible memory leak of 'new' net/sched/cls_cgroup.c:139 cls_cgroup_change() warn: possible memory leak of 'new' Fixes: c7953ef2 ("net: sched: cls_cgroup use RCU") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John Fastabend authored
Add missing rcu_assign_pointer and missing annotation for ht_up in cls_u32.c Caught by kbuild bot, >> net/sched/cls_u32.c:378:36: sparse: incorrect type in initializer (different address spaces) net/sched/cls_u32.c:378:36: expected struct tc_u_hnode *ht net/sched/cls_u32.c:378:36: got struct tc_u_hnode [noderef] <asn:4>*ht_up >> net/sched/cls_u32.c:610:54: sparse: incorrect type in argument 4 (different address spaces) net/sched/cls_u32.c:610:54: expected struct tc_u_hnode *ht net/sched/cls_u32.c:610:54: got struct tc_u_hnode [noderef] <asn:4>*ht_up >> net/sched/cls_u32.c:684:18: sparse: incorrect type in assignment (different address spaces) net/sched/cls_u32.c:684:18: expected struct tc_u_hnode [noderef] <asn:4>*ht_up net/sched/cls_u32.c:684:18: got struct tc_u_hnode *[assigned] ht >> net/sched/cls_u32.c:359:18: sparse: dereference of noderef expression Signed-off-by:
-
John Fastabend authored
kbuild test robot reported an unused variable cpu in cls_u32.c after the patch below. This happens when PERF and MARK config variables are disabled Fix this is to use separate variables for perf and mark and define the cpu variable inside the ifdef logic. Fixes: 459d5f62 ("net: sched: make cls_u32 per cpu")' Signed-off-by:
-
WANG Cong authored
This patch fixes the following crash: [ 42.199159] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 42.200027] IP: [<ffffffff817e3fc4>] tcindex_set_parms+0x45c/0x526 [ 42.200027] PGD d2319067 PUD d4ffe067 PMD 0 [ 42.200027] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 42.200027] CPU: 0 PID: 541 Comm: tc Not tainted 3.17.0-rc4+ #603 [ 42.200027] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 42.200027] task: ffff8800d22d2670 ti: ffff8800ce790000 task.ti: ffff8800ce790000 [ 42.200027] RIP: 0010:[<ffffffff817e3fc4>] [<ffffffff817e3fc4>] tcindex_set_parms+0x45c/0x526 [ 42.200027] RSP: 0018:ffff8800ce793898 EFLAGS: 00010202 [ 42.200027] RAX: 0000000000000001 RBX: ffff8800d1786498 RCX: 0000000000000000 [ 42.200027] RDX: ffffffff82114ec8 RSI: ffffffff82114ec8 RDI: ffffffff82114ec8 [ 42.200027] RBP: ffff8800ce793958 R08: 00000000000080d0 R09: 0000000000000001 [ 42.200027] R10: ffff8800ce7939a0 R11: 0000000000000246 R12: ffff8800d017d238 [ 42.200027] R13: 0000000000000018 R14: ffff8800d017c6a0 R15: ffff8800d1786620 [ 42.200027] FS: 00007f4e24539740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 [ 42.200027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.200027] CR2: 0000000000000018 CR3: 00000000cff38000 CR4: 00000000000006f0 [ 42.200027] Stack: [ 42.200027] ffff8800ce0949f0 0000000000000000 0000000200000003 ffff880000000000 [ 42.200027] ffff8800ce7938b8 ffff8800ce7938b8 0000000600000007 0000000000000000 [ 42.200027] ffff8800ce7938d8 ffff8800ce7938d8 0000000600000007 ffff8800ce0949f0 [ 42.200027] Call Trace: [ 42.200027] [<ffffffff817e4169>] tcindex_change+0xdb/0xee [ 42.200027] [<ffffffff817c16ca>] tc_ctl_tfilter+0x44d/0x63f [ 42.200027] [<ffffffff8179d161>] rtnetlink_rcv_msg+0x181/0x194 [ 42.200027] [<ffffffff8179cf9d>] ? rtnl_lock+0x17/0x19 [ 42.200027] [<ffffffff8179cfe0>] ? __rtnl_unlock+0x17/0x17 [ 42.200027] [<ffffffff817ee296>] netlink_rcv_skb+0x49/0x8b [ 43.462494] [<ffffffff8179cfc2>] rtnetlink_rcv+0x23/0x2a [ 43.462494] [<ffffffff817ec8df>] netlink_unicast+0xc7/0x148 [ 43.462494] [<ffffffff817ed413>] netlink_sendmsg+0x5cb/0x63d [ 43.462494] [<ffffffff810ad781>] ? mark_lock+0x2e/0x224 [ 43.462494] [<ffffffff817757b8>] __sock_sendmsg_nosec+0x25/0x27 [ 43.462494] [<ffffffff81778165>] sock_sendmsg+0x57/0x71 [ 43.462494] [<ffffffff81152bbd>] ? might_fault+0x57/0xa4 [ 43.462494] [<ffffffff81152c06>] ? might_fault+0xa0/0xa4 [ 43.462494] [<ffffffff81152bbd>] ? might_fault+0x57/0xa4 [ 43.462494] [<ffffffff817838fd>] ? verify_iovec+0x69/0xb7 [ 43.462494] [<ffffffff817784f8>] ___sys_sendmsg+0x21d/0x2bb [ 43.462494] [<ffffffff81009db3>] ? native_sched_clock+0x35/0x37 [ 43.462494] [<ffffffff8109ab53>] ? sched_clock_local+0x12/0x72 [ 43.462494] [<ffffffff810ad781>] ? mark_lock+0x2e/0x224 [ 43.462494] [<ffffffff8109ada4>] ? sched_clock_cpu+0xa0/0xb9 [ 43.462494] [<ffffffff810aee37>] ? __lock_acquire+0x5fe/0xde4 [ 43.462494] [<ffffffff8119f570>] ? rcu_read_lock_held+0x36/0x38 [ 43.462494] [<ffffffff8119f75a>] ? __fcheck_files.isra.7+0x4b/0x57 [ 43.462494] [<ffffffff8119fbf2>] ? __fget_light+0x30/0x54 [ 43.462494] [<ffffffff81779012>] __sys_sendmsg+0x42/0x60 [ 43.462494] [<ffffffff81779042>] SyS_sendmsg+0x12/0x1c [ 43.462494] [<ffffffff819d24d2>] system_call_fastpath+0x16/0x1b 'p->h' could be NULL while 'cp->h' is always update to date. Fixes: commit 331b7292 ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-By:
-
