With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

This also fixes error paths of probe(), as a goto is required in this
patch.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

musb also has these dummy macros defined locally.  Remove them as they
aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

Marvell usb also has these dummy macros defined locally.  Remove them as
they aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

pxa i2c also has these dummy macros defined locally.  Remove them as they
aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

menu "Common Clock Framework" has "depends on COMMON_CLK" and so configs
defined within menu don't require these "depends on COMMON_CLK again".
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Many drivers are shared between architectures that may or may not have
HAVE_CLK selected for them.  To remove compilation errors for them we
enclose clk_*() calls in these drivers within #ifdef CONFIG_HAVE_CLK,
#endif.

This patch removes the need of these CONFIG_HAVE_CLK statements, by
introducing dummy routines when HAVE_CLK is not selected by platforms.
So, definition of these routines will always be available.  These calls
will return error for platforms that don't select HAVE_CLK.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commits d065bd81 ("mm: retry page fault when blocking on disk
transfer") and 37b23e05 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.

Port these changes to AVR32.

[akpm@linux-foundation.org: fix comment layout]
Signed-off-by: Mohd. Faris <mohdfarisq2010@gmail.com>
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a small group of odd looking includes in smc37c669.c.  These
includes appear to be if zero-ed out ever since they were added to the
tree (in v2.1.89).  Their purpose is unclear to me.  Perhaps they were
used in someones build system.  Whatever their purpose was, nothing else
uses something comparable.  This entire if zero-ed out block might as well
be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commits d065bd81 ("mm: retry page fault when blocking on disk
transfer") and 37b23e05 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.

Port these changes to xtensa.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Acked-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When suid_dumpable=2, detect unsafe core_pattern settings and warn when
they are seen.
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the suid_dumpable sysctl is set to "2", and there is no core dump
pipe defined in the core_pattern sysctl, a local user can cause core files
to be written to root-writable directories, potentially with
user-controlled content.

This means an admin can unknowningly reintroduce a variation of
CVE-2006-2451, allowing local users to gain root privileges.

  $ cat /proc/sys/fs/suid_dumpable
  2
  $ cat /proc/sys/kernel/core_pattern
  core
  $ ulimit -c unlimited
  $ cd /
  $ ls -l core
  ls: cannot access core: No such file or directory
  $ touch core
  touch: cannot touch `core': Permission denied
  $ OHAI="evil-string-here" ping localhost >/dev/null 2>&1 &
  $ pid=$!
  $ sleep 1
  $ kill -SEGV $pid
  $ ls -l core
  -rw------- 1 root kees 458752 Jun 21 11:35 core
  $ sudo strings core | grep evil
  OHAI=evil-string-here

While cron has been fixed to abort reading a file when there is any
parse error, there are still other sensitive directories that will read
any file present and skip unparsable lines.

Instead of introducing a suid_dumpable=3 mode and breaking all users of
mode 2, this only disables the unsafe portion of mode 2 (writing to disk
via relative path).  Most users of mode 2 (e.g.  Chrome OS) already use
a core dump pipe handler, so this change will not break them.  For the
situations where a pipe handler is not defined but mode 2 is still
active, crash dumps will only be written to fully qualified paths.  If a
relative path is defined (e.g.  the default "core" pattern), dump
attempts will trigger a printk yelling about the lack of a fully
qualified path.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This allocation can be as large as 64k.

 - Add __GFP_NOWARN so the falied kmalloc() is silent

 - Fall back to vmalloc() if the kmalloc() failed
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

->delete_inode(), ->write_super_lockfs(), ->unlockfs() are gone so remove
refereces to them in the NTFS code.  Remove unnecessary comments about
unimplemented methods while at it (suggested by Christoph Hellwig).

Noticed while cleaning up the fsfreeze mess.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Just setting the "error" to error number is enough on failure and It
doesn't require to set "error" variable to zero in each switch case,
since it was already initialized with zero.  And also removed return 0
in switch case with break statement
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP
EFI system table and setup an early console for printk output.  The
routine uses ioremap/iounmap to setup access to the HCDP/PCDP table
information.

The call to ioremap is happening early in the boot process which leads
to a panic on x86_64 systems:

    panic+0x01ca
    do_exit+0x043c
    oops_end+0x00a7
    no_context+0x0119
    __bad_area_nosemaphore+0x0138
    bad_area_nosemaphore+0x000e
    do_page_fault+0x0321
    page_fault+0x0020
    reserve_memtype+0x02a1
    __ioremap_caller+0x0123
    ioremap_nocache+0x0012
    efi_setup_pcdp_console+0x002b
    setup_arch+0x03a9
    start_kernel+0x00d4
    x86_64_start_reservations+0x012c
    x86_64_start_kernel+0x00fe

This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console()
with calls to early_ioremap/early_iounmap which can be called during
early boot.

This patch was tested on an x86_64 prototype system which uses the
HCDP/PCDP table for early console setup.
Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Acked-by: Khalid Aziz <khalid.aziz@hp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a6bc32b8 ("mm: compaction: introduce sync-light migration for
use by compaction") changed the declaration of migrate_pages() and
migrate_huge_pages().

But it missed changing the argument of migrate_huge_pages() in
soft_offline_huge_page().  In this case, we should call
migrate_huge_pages() with MIGRATE_SYNC.

Additionally, there is a mismatch between type the of argument and the
function declaration for migrate_pages().
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull embedded i2c changes from Wolfram Sang:
 "Changes for the "embedded" part of the I2C subsystem:

   - lots of devicetree conversions of drivers (and preparations for
     that)
   - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin
   - Rafael's struct dev_pm_ops conversion patches for I2C
   - usual driver cleanups and fixes

  All patches have been in linux-next for an apropriate time and all
  patches touching files outside of i2c-folders should have proper acks
  from the maintainers."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits)
  Revert "i2c: tegra: convert normal suspend/resume to *_noirq"
  I2C: MV64XYZ: Add Device Tree support
  i2c: stu300: use devm managed resources
  i2c: i2c-ocores: support for 16bit and 32bit IO
  V4L/DVB: mfd: use reg_shift instead of regstep
  i2c: i2c-ocores: Use reg-shift property
  i2c: i2c-ocores: DT bindings and minor fixes.
  i2c: mv64xxxx: remove EXPERIMENTAL tag
  i2c-s3c2410: Use plain pm_runtime_put()
  i2c: s3c2410: Fix pointer type passed to of_match_node()
  i2c: mxs: Set I2C timing registers for mxs-i2c
  i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file.
  i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data.
  i2c:i2c-bfin-twi: include twi head file
  i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load.
  i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly.
  i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves.
  i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios".
  i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios.
  i2c-mv64xxxx: allow more than one driver instance
  ...

Conflicts:
	drivers/i2c/busses/i2c-nomadik.c

Pull networking fixes from David Miller:
 "Several bug fixes, some to new features appearing in this merge
  window, some that have been around for a while.

  I have a short list of known problems that need to be sorted out, but
  all of them can be solved easily during the run up to 3.6-final.

  I'll be offline until Sunday afternoon, but nothing need hold up
  3.6-rc1 and the close of the merge window, networking wise, at this
  point.

  1) Fix interface check in ipv4 TCP early demux, from Eric Dumazet.

  2) Fix a long standing bug in TCP DMA to userspace offload that can
     hang applications using MSG_TRUNC, from Jiri Kosina.

  3) Don't allow TCP_USER_TIMEOUT to be negative, from Hangbin Liu.

  4) Don't use GFP_KERNEL under spinlock in kaweth driver, from Dan
     Carpenter"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tcp: perform DMA to userspace only if there is a task waiting for it
  Revert "openvswitch: potential NULL deref in sample()"
  ipv4: fix TCP early demux
  net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling
  USB: kaweth.c: use GFP_ATOMIC under spin_lock
  tcp: Add TCP_USER_TIMEOUT negative value check
  bcma: add missing iounmap on error path
  bcma: fix regression in interrupt assignment on mips
  mac80211_hwsim: fix possible race condition in usage of info->control.sta & control.vif

Pull ext4 updates from Ted Ts'o:
 "The usual collection of bug fixes and optimizations.  Perhaps of
  greatest note is a speed up for parallel, non-allocating DIO writes,
  since we no longer take the i_mutex lock in that case.

  For bug fixes, we fix an incorrect overhead calculation which caused
  slightly incorrect results for df(1) and statfs(2).  We also fixed
  bugs in the metadata checksum feature."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: undo ext4_calc_metadata_amount if we fail to claim space
  ext4: don't let i_reserved_meta_blocks go negative
  ext4: fix hole punch failure when depth is greater than 0
  ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
  ext4: weed out ext4_write_super
  ext4: remove unnecessary superblock dirtying
  ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super()
  ext4: remove useless marking of superblock dirty
  ext4: fix ext4 mismerge back in January
  ext4: remove dynamic array size in ext4_chksum()
  ext4: remove unused variable in ext4_update_super()
  ext4: make quota as first class supported feature
  ext4: don't take the i_mutex lock when doing DIO overwrites
  ext4: add a new nolock flag in ext4_map_blocks
  ext4: split ext4_file_write into buffered IO and direct IO
  ext4: remove an unused statement in ext4_mb_get_buddy_page_lock()
  ext4: fix out-of-date comments in extents.c
  ext4: use s_csum_seed instead of i_csum_seed for xattr block
  ext4: use proper csum calculation in ext4_rename
  ext4: fix overhead calculation used by ext4_statfs()
  ...

Pull ARM updates from Russell King:
 "First ARM push of this merge window, post me coming back from holiday.
  This is what has been in linux-next for the last few weeks.  Not much
  to say which isn't described by the commit summaries."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  ARM: 7463/1: topology: Update cpu_power according to DT information
  ARM: 7462/1: topology: factorize the update of sibling masks
  ARM: 7461/1: topology: Add arch_scale_freq_power function
  ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
  ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
  ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
  ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
  ARM: 7452/1: delay: allow timer-based delay implementation to be selected
  ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
  ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
  ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
  ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
  ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
  ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
  ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
  ARM: 7444/1: kernel: add arch-timer C3STOP feature
  ARM: 7460/1: remove asm/locks.h
  ARM: 7439/1: head.S: simplify initial page table mapping
  ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
  ARM: 7436/1: Do not map the vectors page as write-through on UP systems
  ...

John W. Linville says:

====================
These fixes are intended for the 3.6 stream.

Hauke Mehrtens provides a pair of bcma fixes, one to fix a build
regression on mips and another to correct a pair of missing iounmap
calls.

Thomas Huehn offers a mac80211_hwsim fix to avoid a possible
use-after-free bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in 2006, commit 1a2449a8 ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.

The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.

This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.

If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.

This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.

This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 5b3e7e6c.

The problem that the original commit was attempting to fix can
never happen in practice because validation is done one a per-flow
basis rather than a per-packet basis.  Adding additional checks at
runtime is unnecessary and inconsistent with the rest of the code.

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 92101b3b (ipv4: Prepare for change of rt->rt_iif encoding.)
invalidated TCP early demux, because rx_dst_ifindex is not properly
initialized and checked.

Also remove the use of inet_iif(skb) in favor or skb->skb_iif
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI
flags are handled specially. Function dev_change_flags sets IFF_PROMISC and
IFF_ALLMULTI bits in dev->gflags according to the passed value but
do_setlink passes a result of rtnl_dev_combine_flags which takes those bits
from dev->flags.

This can be easily trigerred by doing:

tcpdump -i eth0 &
ip l s up eth0

ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with
IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set
IFF_PROMISC in gflags.
Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The problem is that we call this with a spin lock held.  The call tree
is:
	kaweth_start_xmit() holds kaweth->device_lock.
	-> kaweth_async_set_rx_mode()
	   -> kaweth_control()
	      -> kaweth_internal_control_msg()

The kaweth_internal_control_msg() function is only called from
kaweth_control() which used GFP_ATOMIC for its allocations.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But
patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative
values. If a user assign -1 to it, the socket will set successfully and wait
for 4294967295 miliseconds. This patch add a negative value check to avoid
this issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull TTY/Serial patches from Greg Kroah-Hartman:
 "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
  serial drivers.  They were cherry-picked from the tty-next branch of
  the tty git tree, as they are small and "obvious" fixes.  The larger
  changes, as mentioned before, will be saved for the 3.7-rc1 merge
  window.

  All of these changes have been in the linux-next releases for quite a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Fix parity setting issue
  pch_uart: Fix rx error interrupt setting issue
  pch_uart: Fix missing break for 16 byte fifo
  tty ldisc: Close/Reopen race prevention should check the proper flag
  pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
  vt: fix race in vt_waitactive()
  serial/of-serial: Add LPC3220 standard UART compatible string
  serial/8250: Add LPC3220 standard UART type
  serial_core: Update buffer overrun statistics.
  serial: samsung: Fixed wrong comparison for baudclk_rate

Pull final kmap_atomic cleanups from Cong Wang:
 "This should be the final round of cleanup, as the definitions of enum
  km_type finally get removed from the whole tree.  The patches have
  been in linux-next for a long time."

* 'kmap_atomic' of git://github.com/congwang/linux:
  pipe: remove KM_USER0 from comments
  vmalloc: remove KM_USER0 from comments
  feature-removal-schedule.txt: remove kmap_atomic(page, km_type)
  tile: remove km_type definitions
  um: remove km_type definitions
  asm-generic: remove km_type definitions
  avr32: remove km_type definitions
  frv: remove km_type definitions
  powerpc: remove km_type definitions
  arm: remove km_type definitions
  highmem: remove the deprecated form of kmap_atomic
  tile: remove usage of enum km_type
  frv: remove the second parameter of kmap_atomic_primary()
  jbd2: remove the second argument of kmap_atomic

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Here's a handful of powerpc patches, a couple of regression fixes for
  problems introduced in the main batch in this merge window, a couple
  of defconfig updates, and some trivials.

  The radeonfb one is something that was long standing in SLES which I
  forgot to pickup earlier."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ftrace: Trace function graph entry before updating index
  radeonfb: Add quirk for the graphics adapter in some JSxx
  powerpc: Lack of firmware flash support is not an error
  powerpc: Enable pseries hardware RNG and crypto modules
  powerpc: Update g5_defconfig
  powerpc/kvm/bookehv: Fix build regression
  powerpc: Set stack limit properly in crit_transfer_to_handler

Merge tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull cpumask changes from Rusty Russell:
 "Trivial comment changes to cpumask code.  I guess it's getting boring."

Boring is good.

* tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: cpulist_parse() comments correction
  init: add comments to keep initcall-names in sync with initcall levels
  cpumask: add a few comments of cpumask functions

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Pull ARM SoC fixes from Olof Johansson:
 "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and
  a short series of fixes for marvell platforms that didn't make it in
  before 3.5."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: fix compile error caused by prom_update_property change
  ARM: dt: tegra trimslice: enable USB2 port
  ARM: dt: tegra trimslice: add vbus-gpio property
  ARM: vt8500: Add maintainer for VT8500 architecture
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Orion: fix driver probe error handling with respect to clk
  ARM: Dove: Fixup ge00 initialisation
  ARM: Kirkwood: Fix PHY disable clk problems
  ARM: Kirkwood: Ensure runit clock always ticks.
  ARM: versatile: Don't use platform clock for Integrator & VE
  ARM: tegra: harmony: add regulator supply name and its input supply

Pull LED subsystem update from Bryan Wu.

* 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits)
  leds-lp8788: forgotten unlock at lp8788_led_work
  LEDS: propagate error codes in blinkm_detect()
  LEDS: memory leak in blinkm_led_common_set()
  leds: add new lp8788 led driver
  LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
  leds: max8997: Simplify max8997_led_set_mode implementation
  leds/leds-s3c24xx: use devm_gpio_request
  leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert DAC124S085 LED driver to devm_kzalloc()
  leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert TCA6507 LED driver to devm_kzalloc()
  leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9532 LED driver to devm_kzalloc()
  leds: convert LT3593 LED driver to devm_kzalloc()
  leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9633 LED driver to devm_kzalloc()
  ...

As Colin Cross ported my x86 change to ARM, he also pointed out that
powerpc is also behind in this fix.

The commit 722b3c74 "ftrace/graph: Trace function entry before
updating index" fixes an issue with function graph tracing for x86,
where if the called entry function decides not to trace interrupts, it
can fail the check if an interrupt comes in just after the
curr_ret_stack is updated.

The solution is to call the entry function first, then update the
curr_ret_stack if the entry function wants to be traced.

Cc: Colin Cross <ccross@android.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>