- 16 Sep, 2019 36 commits
-
-
Markus Elfring authored
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== drop_monitor: Better sanitize notified packets When working in 'packet' mode, drop monitor generates a notification with a potentially truncated payload of the dropped packet. The payload is copied from the MAC header, but I forgot to check that the MAC header was set, so do it now. Patch #1 sets the offsets to the various protocol layers in netdevsim, so that it will continue to work after the MAC header check is added to drop monitor in patch #2. ==================== Signed-off-by: -
Ido Schimmel authored
When working in 'packet' mode, drop monitor generates a notification with a potentially truncated payload of the dropped packet. The payload is copied from the MAC header, but I forgot to check that the MAC header was set, so do it now. Fixes: ca30707d ("drop_monitor: Add packet alert mode") Fixes: 5e58109b ("drop_monitor: Add support for packet alert mode for hardware drops") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The driver periodically generates "trapped" UDP packets that it then passes on to devlink. Set the offsets to the various protocol layers. This is a prerequisite to the next patch, where drop monitor is taught to check that the offset to the MAC header was set. Acked-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== tc-taprio offload for SJA1105 DSA This is the third attempt to submit the tc-taprio offload model for inclusion in the networking tree. The sja1105 switch driver will provide the first implementation of the offload. Only the bare minimum is added: - The offload model and a DSA pass-through - The hardware implementation - The interaction with the netdev queues in the tagger code - Documentation What has been removed from previous attempts is support for PTP-as-clocksource in sja1105, as well as configuring the traffic class for management traffic. These will be added as soon as the offload model is settled. ==================== Signed-off-by: -
Vladimir Oltean authored
While not an exhaustive usage tutorial, this describes the details needed to build more complex scenarios. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
This qdisc offload is the closest thing to what the SJA1105 supports in hardware for time-based egress shaping. The switch core really is built around SAE AS6802/TTEthernet (a TTTech standard) but can be made to operate similarly to IEEE 802.1Qbv with some constraints: - The gate control list is a global list for all ports. There are 8 execution threads that iterate through this global list in parallel. I don't know why 8, there are only 4 front-panel ports. - Care must be taken by the user to make sure that two execution threads never get to execute a GCL entry simultaneously. I created a O(n^4) checker for this hardware limitation, prior to accepting a taprio offload configuration as valid. - The spec says that if a GCL entry's interval is shorter than the frame length, you shouldn't send it (and end up in head-of-line blocking). Well, this switch does anyway. - The switch has no concept of ADMIN and OPER configurations. Because it's so simple, the TAS settings are loaded through the static config tables interface, so there isn't even place for any discussion about 'graceful switchover between ADMIN and OPER'. You just reset the switch and upload a new OPER config. - The switch accepts multiple time sources for the gate events. Right now I am using the standalone clock source as opposed to PTP. So the base time parameter doesn't really do much. Support for the PTP clock source will be added in a future series. Signed-off-by:
-
Vladimir Oltean authored
This is a preparation patch for the tc-taprio offload (and potentially for other future offloads such as tc-mqprio). Instead of looking directly at skb->priority during xmit, let's get the netdev queue and the queue-to-traffic-class mapping, and put the resulting traffic class into the dsa_8021q PCP field. The switch is configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping (see vlan_pmap in sja1105_main.c), so the effect is that we can inject into a front-panel's egress traffic class through VLAN tagging from Linux, completely transparently. Unfortunately the switch doesn't look at the VLAN PCP in the case of management traffic to/from the CPU (link-local frames at 01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the transmission queue of this type of traffic on a frame-by-frame basis. It is only selected through the "hostprio" setting which ATM is harcoded in the driver to 7. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
In order to support tc-taprio offload, the TTEthernet egress scheduling core registers must be made visible through the static interface. Signed-off-by:
-
Vladimir Oltean authored
DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Vinicius Costa Gomes authored
This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
-
Russell King authored
Update the phylink documentation to make it clear that phylink is designed to be used on the MAC facing side of the link, rather than between a SFP and PHY. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: error recovery follow-up patches. A follow-up patchset for the recently added health and error recovery feature. The first fix is to prevent .ndo_set_rx_mode() from proceeding when reset is in progress. The 2nd fix is for the firmware coredump command. The 3rd and 4th patches update the error recovery process slightly to add a state that polls and waits for the firmware to be down. ==================== Signed-off-by: -
Vasundhara Volam authored
This new state is required when firmware indicates that the error recovery process requires polling for firmware state to be completely down before initiating reset. For example, firmware may take some time to collect the crash dump before it is down and ready to be reset. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Some error recovery updates to the spec., among other minor changes. Signed-off-by:
-
Vasundhara Volam authored
Firmware coredump messages take much longer than standard messages, so increase the timeout accordingly. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by:
-
Michael Chan authored
Check the BNXT_STATE_OPEN flag instead of netif_running() in bnxt_set_rx_mode(). If the driver is going through any reset, such as firmware reset or even TX timeout, it may not be ready to set the RX mode and may crash. The new rx mode settings will be picked up when the device is opened again later. Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.") Signed-off-by:
-
Thomas Higdon authored
Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP performance problems -- > (1) Usually when we're diagnosing TCP performance problems, we do so > from the sender, since the sender makes most of the > performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc). > From the sender-side the thing that would be most useful is to see > tp->snd_wnd, the receive window that the receiver has advertised to > the sender. This serves the purpose of adding an additional __u32 to avoid the would-be hole caused by the addition of the tcpi_rcvi_ooopack field. Signed-off-by:
Thomas Higdon <tph@fb.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Thomas Higdon authored
For receive-heavy cases on the server-side, we want to track the connection quality for individual client IPs. This counter, similar to the existing system-wide TCPOFOQueue counter in /proc/net/netstat, tracks out-of-order packet reception. By providing this counter in TCP_INFO, it will allow understanding to what degree receive-heavy sockets are experiencing out-of-order delivery and packet drops indicating congestion. Please note that this is similar to the counter in NetBSD TCP_INFO, and has the same name. Also note that we avoid increasing the size of the tcp_sock struct by taking advantage of a hole. Signed-off-by:
-
Dmitry Torokhov authored
The MDIO device reset line is optional and now that gpiod_get_optional() returns proper value when GPIO support is compiled out, there is no reason to use fwnode_get_named_gpiod() that I plan to hide away. Let's switch to using more standard gpiod_get_optional() and gpiod_set_consumer_name() to keep the nice "PHY reset" label. Also there is no reason to only try to fetch the reset GPIO when we have OF node, gpiolib can fetch GPIO data from firmwares as well. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-09-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Now that initial BPF backend for gcc has been merged upstream, enable BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to bpf_sysctl.file_pos, from Ilya. 2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions related to recent work on exposing BTF info through sysfs, from Andrii. 3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem headroom to be added twice, from Ciara. 4) Refactoring work to convert sock opt tests into test_progs framework in BPF kselftests, from Stanislav. 5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke. 6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami. ==================== Signed-off-by: -
Ilya Leoshkevich authored
"ctx:file_pos sysctl:read write ok" fails on s390 with "Read value != nux". This is because verifier rewrites a complete 32-bit bpf_sysctl.file_pos update to a partial update of the first 32 bits of 64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian systems. Fix by using an offset on big-endian systems. Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect a problem there, since it expects to see 0, which it gets with high probability in error cases, so change it to seek to offset 3 and expect 3 in bpf_sysctl.file_pos. Fixes: e1550bfe ("bpf: Add file_pos field to bpf_sysctl ctx") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20190816105300.49035-1-iii@linux.ibm.com/
-
Toke Høiland-Jørgensen authored
syzbot found a crash in dev_map_hash_update_elem(), when replacing an element with a new one. Jesper correctly identified the cause of the crash as a race condition between the initial lookup in the map (which is done before taking the lock), and the removal of the old element. Rather than just add a second lookup into the hashmap after taking the lock, fix this by reworking the function logic to take the lock before the initial lookup. Fixes: 6f9d451a ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-and-tested-by: syzbot+4e7a85b1432052e8d6f8@syzkaller.appspotmail.com Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
Ciara Loftus says: ==================== This patch set contains some fixes for AF_XDP zero copy in the i40e and ixgbe drivers as well as a fix for the 'xdpsock' sample application when running in unaligned mode. Patches 1 and 2 fix a regression for the i40e and ixgbe drivers which caused the umem headroom to be added to the xdp handle twice, resulting in an incorrect value being received by the user for the case where the umem headroom is non-zero. Patch 3 fixes an issue with the xdpsock sample application whereby the start of the tx packet data (offset) was not being set correctly when the application was being run in unaligned mode. This patch set has been applied against commit a2c11b03 ("kcm: use BPF_PROG_RUN") ==================== Acked-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
Ciara Loftus authored
Preserve the offset of the address of the received descriptor, and include it in the address set for the tx descriptor, so the kernel can correctly locate the start of the packet data. Fixes: 03895e63 ("samples/bpf: add buffer recycling for unaligned chunks to xdpsock") Signed-off-by:
Ciara Loftus <ciara.loftus@intel.com> Signed-off-by:
-
Ciara Loftus authored
Commit 7cbbf9f1 ("ixgbe: fix xdp handle calculations") reintroduced the addition of the umem headroom to the xdp handle in the ixgbe_zca_free, ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc functions. However, the headroom is already added to the handle in the function ixgbe_run_xdp_zc. This commit removes the latter addition and fixes the case where the headroom is non-zero. Fixes: 7cbbf9f1 ("ixgbe: fix xdp handle calculations") Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Ciara Loftus authored
Commit 4c5d9a7f ("i40e: fix xdp handle calculations") reintroduced the addition of the umem headroom to the xdp handle in the i40e_zca_free, i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc functions. However, the headroom is already added to the handle in the function i40_run_xdp_zc. This commit removes the latter addition and fixes the case where the headroom is non-zero. Fixes: 4c5d9a7f ("i40e: fix xdp handle calculations") Signed-off-by:
-
Ilya Leoshkevich authored
Now that binutils and gcc support for BPF is upstream, make use of it in BPF selftests using alu32-like approach. Share as much as possible of CFLAGS calculation with clang. Fixes only obvious issues, leaving more complex ones for later: - Use gcc-provided bpf-helpers.h instead of manually defining the helpers, change bpf_helpers.h include guard to avoid conflict. - Include <linux/stddef.h> for __always_inline. - Add $(OUTPUT)/../usr/include to include path in order to use local kernel headers instead of system kernel headers when building with O=. In order to activate the bpf-gcc support, one needs to configure binutils and gcc with --target=bpf and make them available in $PATH. In particular, gcc must be installed as `bpf-gcc`, which is the default. Right now with binutils 25a2915e8dba and gcc r275589 only a handful of tests work: # ./test_progs_bpf_gcc # Summary: 7/39 PASSED, 1 SKIPPED, 98 FAILED The reason for those failures are as follows: - Build errors: - `error: too many function arguments for eBPF` for __always_inline functions read_str_var and read_map_var - must be inlining issue, and for process_l3_headers_v6, which relies on optimizing away function arguments. - `error: indirect call in function, which are not supported by eBPF` where there are no obvious indirect calls in the source calls, e.g. in __encap_ipip_none. - `error: field 'lock' has incomplete type` for fields of `struct bpf_spin_lock` type - bpf_spin_lock is re#defined by bpf-helpers.h, so its usage is sensitive to order of #includes. - `error: eBPF stack limit exceeded` in sysctl_tcp_mem. - Load errors: - Missing object files due to above build errors. - `libbpf: failed to create map (name: 'test_ver.bss')`. - `libbpf: object file doesn't contain bpf program`. - `libbpf: Program '.text' contains unrecognized relo data pointing to section 0`. - `libbpf: BTF is required, but is missing or corrupted` - no BTF support in gcc yet. Signed-off-by: -
Alexandru Ardelean authored
The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac` struct and parses it on init. The shared `stmmac_probe_config_dt()` function also parses this from the device-tree and makes it available on the returned `plat_data` (which is the same data available via `netdev_priv()`). All that's needed now is to dig that information out, via some `dev_get_drvdata()` && `netdev_priv()` calls and re-use it. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== More fixes for unlocked cls hardware offload API refactoring Two fixes for my "Refactor cls hardware offload API to support rtnl-independent drivers" series and refactoring patch that implements infrastructure necessary for the fixes. ==================== Signed-off-by: -
Vlad Buslov authored
When filling in hardware intermediate representation tc_setup_flow_action() directly obtains, checks and takes reference to dev used by mirred action, instead of using act->ops->get_dev() API created specifically for this purpose. In order to remove code duplication, refactor flow_action infra to use action API when obtaining mirred action target dev. Extend get_dev() with additional argument that is used to provide dev destructor to the user. Fixes: 5a6ff4b1 ("net: sched: take reference to action dev before calling offloads") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
-
Vlad Buslov authored
With recent patch set that removed rtnl lock dependency from cls hardware offload API rtnl lock is only taken when reading action data and can be released after action-specific data is parsed into intermediate representation. However, sample action psample group is passed by pointer without obtaining reference to it first, which makes it possible to concurrently overwrite the action and deallocate object pointed by psample_group pointer after rtnl lock is released but before driver finished using the pointer. To prevent such race condition, obtain reference to psample group while it is used by flow_action infra. Extend psample API with function psample_group_take() that increments psample group reference counter. Extend struct tc_action_ops with new get_psample_group() API. Implement the API for action sample using psample_group_take() and already existing psample_group_put() as a destructor. Use it in tc_setup_flow_action() to take reference to psample group pointed to by entry->sample.psample_group and release it in tc_cleanup_flow_action(). Disable bh when taking psample_groups_lock. The lock is now taken while holding action tcf_lock that is used by data path and requires bh to be disabled, so doing the same for psample_groups_lock is necessary to preserve SOFTIRQ-irq-safety. Fixes: 918190f5 ("net: sched: flower: don't take rtnl lock for cls hw offloads API") Signed-off-by:
-
Vlad Buslov authored
Generalize flow_action_entry cleanup by extending the structure with pointer to destructor function. Set the destructor in tc_setup_flow_action(). Refactor tc_cleanup_flow_action() to call entry->destructor() instead of using switch that dispatches by entry->id and manually executes cleanup. This refactoring is necessary for following patches in this series that require destructor to use tc_action->ops callbacks that can't be easily obtained in tc_cleanup_flow_action(). Signed-off-by:
-
Dan Carpenter authored
Using static analysis, I discovered that the "dpriv->pci_priv->pdev" pointer is always NULL. This pointer was supposed to be initialized during probe and is essential for the driver to work. It would be easy to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has been broken since before we started using git and no one has complained so probably we should just remove it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a DP_VERBOSE debug message. Fix it. (Using American English spelling as this is the most common way to spell this in the kernel). Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Florian Fainelli authored
Add support for configuring the per-port egress flooding control for both Unicast and Multicast traffic. Signed-off-by:
-
- 15 Sep, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by:
-
- 14 Sep, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "The main change here is a revert of reverts. We recently simplified some code that was thought unnecessary; however, since then KVM has grown quite a few cond_resched()s and for that reason the simplified code is prone to livelocks---one CPUs tries to empty a list of guest page tables while the others keep adding to them. This adds back the generation-based zapping of guest page tables, which was not unnecessary after all. On top of this, there is a fix for a kernel memory leak and a couple of s390 fixlets as well" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot KVM: x86: work around leak of uninitialized stack contents KVM: nVMX: handle page fault in vmread KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "A last minute revert The 32-bit build got broken by the latest defence in depth patch. Revert and we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: Revert "vhost: block speculation of translated descriptors"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Paul Walmsley: "Last week, Palmer and I learned that there was an error in the RISC-V kernel image header format that could make it less compatible with the ARM64 kernel image header format. I had missed this error during my original reviews of the patch. The kernel image header format is an interface that impacts bootloaders, QEMU, and other user tools. Those packages must be updated to align with whatever is merged in the kernel. We would like to avoid proliferating these image formats by keeping the RISC-V header as close as possible to the existing ARM64 header. Since the arch/riscv patch that adds support for the image header was merged with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add an Image header that boot loader can parse."), we think it wise to try to fix this error before v5.3 is released. The fix itself should be backwards-compatible with any project that has already merged support for premature versions of this interface. It primarily involves ensuring that the RISC-V image header has something useful in the same field as the ARM64 image header" * tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: modify the Image header to improve compatibility with the ARM64 header
-
