1. 28 Apr, 2014 14 commits
    • Anton Blanchard's avatar
      powerpc/powernv: Fix little endian issues with opal_do_notifier calls · 56b4c993
      Anton Blanchard authored
      The bitmap in opal_poll_events and opal_handle_interrupt is
      big endian, so we need to byteswap it on little endian builds.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      56b4c993
    • Anton Blanchard's avatar
      powerpc/powernv: Remove some OPAL function declaration duplication · e2c8b93e
      Anton Blanchard authored
      We had some duplication of the internal OPAL functions.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      e2c8b93e
    • Anton Blanchard's avatar
      powerpc/powernv: Use uint64_t instead of size_t in OPAL APIs · 2bad7423
      Anton Blanchard authored
      Using size_t in our APIs is asking for trouble, especially
      when some OPAL calls use size_t pointers.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Reviewed-by: default avatarStewart Smith <stewart@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      2bad7423
    • Wei Yang's avatar
      powerpc/powernv: Release the refcount for pci_dev · 4966bfa1
      Wei Yang authored
      On PowerNV platform, we are holding an unnecessary refcount on a pci_dev, which
      leads to the pci_dev is not destroyed when hotplugging a pci device.
      
      This patch release the unnecessary refcount.
      Signed-off-by: default avatarWei Yang <weiyang@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      4966bfa1
    • Wei Yang's avatar
      powerpc/powernv: Reduce multi-hit of iommu_add_device() · 3f28c5af
      Wei Yang authored
      During the EEH hotplug event, iommu_add_device() will be invoked three times
      and two of them will trigger warning or error.
      
      The three times to invoke the iommu_add_device() are:
      
          pci_device_add
             ...
             set_iommu_table_base_and_group   <- 1st time, fail
          device_add
             ...
             tce_iommu_bus_notifier           <- 2nd time, succees
          pcibios_add_pci_devices
             ...
             pcibios_setup_bus_devices        <- 3rd time, re-attach
      
      The first time fails, since the dev->kobj->sd is not initialized. The
      dev->kobj->sd is initialized in device_add().
      The third time's warning is triggered by the re-attach of the iommu_group.
      
      After applying this patch, the error
      
          iommu_tce: 0003:05:00.0 has not been added, ret=-14
      
      and the warning
      
          [  204.123609] ------------[ cut here ]------------
          [  204.123645] WARNING: at arch/powerpc/kernel/iommu.c:1125
          [  204.123680] Modules linked in: xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT bnep bluetooth 6lowpan_iphc rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc mlx4_ib ib_sa ib_mad ib_core ib_addr ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnx2x tg3 mlx4_core nfsd ptp mdio ses libcrc32c nfs_acl enclosure be2net pps_core shpchp lockd kvm uinput sunrpc binfmt_misc lpfc scsi_transport_fc ipr scsi_tgt
          [  204.124356] CPU: 18 PID: 650 Comm: eehd Not tainted 3.14.0-rc5yw+ #102
          [  204.124400] task: c0000027ed485670 ti: c0000027ed50c000 task.ti: c0000027ed50c000
          [  204.124453] NIP: c00000000003cf80 LR: c00000000006c648 CTR: c00000000006c5c0
          [  204.124506] REGS: c0000027ed50f440 TRAP: 0700   Not tainted  (3.14.0-rc5yw+)
          [  204.124558] MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI>  CR: 88008084  XER: 20000000
          [  204.124682] CFAR: c00000000006c644 SOFTE: 1
          GPR00: c00000000006c648 c0000027ed50f6c0 c000000001398380 c0000027ec260300
          GPR04: c0000027ea92c000 c00000000006ad00 c0000000016e41b0 0000000000000110
          GPR08: c0000000012cd4c0 0000000000000001 c0000027ec2602ff 0000000000000062
          GPR12: 0000000028008084 c00000000fdca200 c0000000000d1d90 c0000027ec281a80
          GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
          GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
          GPR24: 000000005342697b 0000000000002906 c000001fe6ac9800 c000001fe6ac9800
          GPR28: 0000000000000000 c0000000016e3a80 c0000027ea92c090 c0000027ea92c000
          [  204.125353] NIP [c00000000003cf80] .iommu_add_device+0x30/0x1f0
          [  204.125399] LR [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
          [  204.125443] Call Trace:
          [  204.125464] [c0000027ed50f6c0] [c0000027ed50f750] 0xc0000027ed50f750 (unreliable)
          [  204.125526] [c0000027ed50f750] [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
          [  204.125588] [c0000027ed50f7d0] [c000000000069cc8] .pnv_pci_dma_dev_setup+0x78/0x340
          [  204.125650] [c0000027ed50f870] [c000000000044408] .pcibios_setup_device+0x88/0x2f0
          [  204.125712] [c0000027ed50f940] [c000000000046040] .pcibios_setup_bus_devices+0x60/0xd0
          [  204.125774] [c0000027ed50f9c0] [c000000000043acc] .pcibios_add_pci_devices+0xdc/0x1c0
          [  204.125837] [c0000027ed50fa50] [c00000000086f970] .eeh_reset_device+0x36c/0x4f0
          [  204.125939] [c0000027ed50fb20] [c00000000003a2d8] .eeh_handle_normal_event+0x448/0x480
          [  204.126068] [c0000027ed50fbc0] [c00000000003a35c] .eeh_handle_event+0x4c/0x340
          [  204.126192] [c0000027ed50fc80] [c00000000003a74c] .eeh_event_handler+0xfc/0x1b0
          [  204.126319] [c0000027ed50fd30] [c0000000000d1ea0] .kthread+0x110/0x130
          [  204.126430] [c0000027ed50fe30] [c00000000000a460] .ret_from_kernel_thread+0x5c/0x7c
          [  204.126556] Instruction dump:
          [  204.126610] 7c0802a6 fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ff71 7c7e1b78 60000000
          [  204.126787] 60000000 e87e0298 3143ffff 7d2a1910 <0b090000> 2fa90000 40de00c8 ebfe0218
          [  204.126966] ---[ end trace 6e7aefd80add2973 ]---
      
      are cleared.
      
      This patch removes iommu_add_device() in pnv_pci_ioda_dma_dev_setup(), which
      revert part of the change in commit d905c5df(PPC: POWERNV: move
      iommu_add_device earlier).
      Signed-off-by: default avatarWei Yang <weiyang@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3f28c5af
    • Anton Blanchard's avatar
      powerpc/powernv: Fix little endian issues in OPAL flash code · cc146d1d
      Anton Blanchard authored
      With this patch I was able to update firmware on an LE kernel.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      cc146d1d
    • Benjamin Herrenschmidt's avatar
      powerpc/powernv: Fix kexec races going back to OPAL · 298b34d7
      Benjamin Herrenschmidt authored
      We have a subtle race when sending CPUs back to OPAL on kexec.
      
      We mark them as "in real mode" right before we send them down. Once
      we've booted the new kernel, it might try to call opal_reinit_cpus()
      to change endianness, and that requires all CPUs to be spinning inside
      OPAL.
      
      However there is no synchronization here and we've observed cases
      where the returning CPUs hadn't established their new state inside
      OPAL before opal_reinit_cpus() is called, causing it to fail.
      
      The proper fix is to actually wait for them to go down all the way
      from the kexec'ing kernel.
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      298b34d7
    • Joel Stanley's avatar
      powerpc/powernv: Check sysparam size before creation · 63aecfb2
      Joel Stanley authored
      The size of the sysparam sysfs files is determined from the device tree
      at boot. However the buffer is hard coded to 64 bytes. If we encounter a
      parameter that is larger than 64, or miss-parse the device tree, the
      buffer will overflow when reading or writing to the parameter.
      
      Check it at discovery time, and if the parameter is too large, do not
      create a sysfs entry for it.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      63aecfb2
    • Joel Stanley's avatar
    • Joel Stanley's avatar
      powerpc/powernv: Check sysfs size before copying · 85390378
      Joel Stanley authored
      The sysparam code currently uses the userspace supplied number of
      bytes when memcpy()ing in to a local 64-byte buffer.
      
      Limit the maximum number of bytes by the size of the buffer.
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      85390378
    • Joel Stanley's avatar
      powerpc/powernv: Use ssize_t for sysparam return values · b8569d23
      Joel Stanley authored
      The OPAL calls are returning int64_t values, which the sysparam code
      stores in an int, and the sysfs callback returns ssize_t. Make code a
      easier to read by consistently using ssize_t.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b8569d23
    • Joel Stanley's avatar
      powerpc/powernv: Fix sysparam sysfs error handling · ba9a32b1
      Joel Stanley authored
      When a sysparam query in OPAL returned a negative value (error code),
      sysfs would spew out a decent chunk of memory; almost 64K more than
      expected. This was traced to a sign/unsigned mix up in the OPAL sysparam
      sysfs code at sys_param_show.
      
      The return value of sys_param_show is a ssize_t, calculated using
      
        return ret ? ret : attr->param_size;
      
      Alan Modra explains:
      
        "attr->param_size" is an unsigned int, "ret" an int, so the overall
        expression has type unsigned int.  Result is that ret is cast to
        unsigned int before being cast to ssize_t.
      
      Instead of using the ternary operator, set ret to the param_size if an
      error is not detected. The same bug exists in the sysfs write callback;
      this patch fixes it in the same way.
      
      A note on debugging this next time: on my system gcc will warn about
      this if compiled with -Wsign-compare, which is not enabled by -Wall,
      only -Wextra.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ba9a32b1
    • Li Zhong's avatar
      powerpc: Fix Oops in rtas_stop_self() · 4fb8d027
      Li Zhong authored
      commit 41dd03a9 may cause Oops in rtas_stop_self().
      
      The reason is that the rtas_args was moved into stack space. For a box
      with more that 4GB RAM, the stack could easily be outside 32bit range,
      but RTAS is 32bit.
      
      So the patch moves rtas_args away from stack by adding static before
      it.
      Signed-off-by: default avatarLi Zhong <zhong@linux.vnet.ibm.com>
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Cc: stable@vger.kernel.org # 3.14+
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      4fb8d027
    • Jeff Mahoney's avatar
      powerpc: Export flush_icache_range · 28ea3c75
      Jeff Mahoney authored
      Commit aac416fc (lkdtm: flush icache and report actions) calls
      flush_icache_range from a module. It's exported on most architectures
      that implement it, but not on powerpc. This patch exports it to fix
      the module link failure.
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      28ea3c75
  2. 20 Apr, 2014 5 commits
  3. 19 Apr, 2014 12 commits
    • Adrien BAK's avatar
      perf tools: Improve error reporting · ffa91880
      Adrien BAK authored
      In the current version, when using perf record, if something goes
      wrong in tools/perf/builtin-record.c:375
        session = perf_session__new(file, false, NULL);
      
      The error message:
      "Not enough memory for reading per file header"
      
      is issued. This error message seems to be outdated and is not very
      helpful. This patch proposes to replace this error message by
      "Perf session creation failed"
      
      I believe this issue has been brought to lkml:
      https://lkml.org/lkml/2014/2/24/458
      although this patch only tackles a (small) part of the issue.
      
      Additionnaly, this patch improves error reporting in
      tools/perf/util/data.c open_file_write.
      
      Currently, if the call to open fails, the user is unaware of it.
      This patch logs the error, before returning the error code to
      the caller.
      Reported-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAdrien BAK <adrien.bak@metascale.org>
      Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast
      [ Reorganize the changelog into paragraphs ]
      [ Added empty line after fd declaration in open_file_write ]
      Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      ffa91880
    • Vladimir Nikulichev's avatar
      perf tools: Adjust symbols in VDSO · 922d0e4d
      Vladimir Nikulichev authored
      pert-report doesn't resolve function names in VDSO:
      
      $ perf report --stdio -g flat,0.0,15,callee --sort pid
      ...
                  8.76%
                     0x7fff6b1fe861
                     __gettimeofday
                     ACE_OS::gettimeofday()
      ...
      
      In this case symbol values should be adjusted the same way as for executables,
      relocatable objects and prelinked libraries.
      
      After fix:
      
      $ perf report --stdio -g flat,0.0,15,callee --sort pid
      ...
                  8.76%
                     __vdso_gettimeofday
                     __gettimeofday
                     ACE_OS::gettimeofday()
      Signed-off-by: default avatarVladimir Nikulichev <nvs@tbricks.com>
      Tested-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Reviewed-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      922d0e4d
    • Alexander Yarygin's avatar
      perf kvm: Fix 'Min time' counting in report command · acb61fc8
      Alexander Yarygin authored
      Every event in the perf-kvm has a 'stats' structure, which contains
      max/min/average/etc times of handling this event.
      The problem is that the 'perf-kvm stat report' command always shows
      that 'min time' is 0us for every event. Example:
      
       # perf kvm stat report
      
       Analyze events for all VCPUs:
      
          VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
        [..]
        0xB2 MSCH         12     0.07%     0.00%        0us        8us 7.31us ( +-   2.11% )
        0xB2 CHSC         12     0.07%     0.00%        0us       18us 9.39us ( +-   9.49% )
        0xB2 STPX          8     0.05%     0.00%        0us        2us 1.88us ( +-   7.18% )
        0xB2 STSI          7     0.04%     0.00%        0us       44us 16.49us ( +-  38.20% )
        [..]
      
      This happens because the 'stats' structure is not initialized and
      stats->min equals to 0. Lets initialize the structure for every
      event after its allocation using init_stats() function. This initializes
      stats->min to -1 and makes 'Min time' statistics counting work:
      
       # perf kvm stat report
      
       Analyze events for all VCPUs:
      
          VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
        [..]
        0xB2 MSCH         12     0.07%     0.00%        6us        8us 7.31us ( +-   2.11% )
        0xB2 CHSC         12     0.07%     0.00%        7us       18us 9.39us ( +-   9.49% )
        0xB2 STPX          8     0.05%     0.00%        1us        2us 1.88us ( +-   7.18% )
        0xB2 STSI          7     0.04%     0.00%        1us       44us 16.49us ( +-  38.20% )
        [..]
      Signed-off-by: default avatarAlexander Yarygin <yarygin@linux.vnet.ibm.com>
      Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
      Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com
      [ Fixing the perf examples changelog output ]
      Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      acb61fc8
    • Eric Dumazet's avatar
      coredump: fix va_list corruption · 404ca80e
      Eric Dumazet authored
      A va_list needs to be copied in case it needs to be used twice.
      
      Thanks to Hugh for debugging this issue, leading to various panics.
      
      Tested:
      
        lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
      
      'produce_core' is simply : main() { *(int *)0 = 1;}
      
        lpq84:~# ./produce_core
        Segmentation fault (core dumped)
        lpq84:~# dmesg | tail -1
        [  614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed
      
      Notice the last argument was replaced by a NULL (we were lucky enough to
      not crash, but do not try this on your production machine !)
      
      After fix :
      
        lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
        lpq83:~# ./produce_core
        Segmentation fault
        lpq83:~# dmesg | tail -1
        [  740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed
      
      Fixes: 5fe9d8ca ("coredump: cn_vprintf() has no reason to call vsnprintf() twice")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Diagnosed-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: stable@vger.kernel.org # 3.11+
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      404ca80e
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 6d459690
      Linus Torvalds authored
      Pull x86 fix from Ingo Molnar:
       "This fixes the preemption-count imbalance crash reported by Owen
        Kibel"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/mce: Fix CMCI preemption bugs
      6d459690
    • Linus Torvalds's avatar
      Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8f98f6f5
      Linus Torvalds authored
      Pull scheduler fixes from Ingo Molnar:
       "Two fixes:
      
         - a SCHED_DEADLINE task selection fix
         - a sched/numa related lockdep splat fix"
      
      * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        sched: Check for stop task appearance when balancing happens
        sched/numa: Fix task_numa_free() lockdep splat
      8f98f6f5
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8de3f7a7
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "Two kernel side fixes:
      
         - an Intel uncore PMU driver potential crash fix
         - a kprobes/perf-call-graph interaction fix"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU
        kprobes/x86: Fix page-fault handling logic
      8de3f7a7
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · b9312420
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Unfortunately this contains no easter eggs, its a bit larger than I'd
        like, but I included a patch that just moves code from one file to
        another and I'd like to avoid merge conflicts with that later, so it
        makes it seem worse than it is,
      
        Otherwise:
         - radeon: fixes to use new microcode to stabilise some cards, use
           some common displayport code, some runtime pm fixes, pll regression
           fixes
         - i915: fix for some context oopses, a warn in a used path, backlight
           fixes
         - nouveau: regression fix
         - omap: a bunch of fixes"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (51 commits)
        drm: bochs: drop unused struct fields
        drm: bochs: add power management support
        drm: cirrus: add power management support
        drm: Split out drm_probe_helper.c from drm_crtc_helper.c
        drm/plane-helper: Don't fake-implement primary plane disabling
        drm/ast: fix value check in cbr_scan2
        drm/nouveau/bios: fix a bit shift error introduced by 457e77b2
        drm/radeon/ci: make sure mc ucode is loaded before checking the size
        drm/radeon/si: make sure mc ucode is loaded before checking the size
        drm/radeon: improve PLL params if we don't match exactly v2
        drm/radeon: memory leak on bo reservation failure. v2
        drm/radeon: fix VCE fence command
        drm/radeon: re-enable mclk dpm on R7 260X asics
        drm/radeon: add support for newer mc ucode on CI (v2)
        drm/radeon: add support for newer mc ucode on SI (v2)
        drm/radeon: apply more strict limits for PLL params v2
        drm/radeon: update CI DPM powertune settings
        drm/radeon: fix runpm handling on APUs (v4)
        drm/radeon: disable mclk dpm on R7 260X
        drm/tegra: Remove gratuitous pad field
        ...
      b9312420
    • Dave Airlie's avatar
      Merge branch 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux into drm-next · a42892ed
      Dave Airlie authored
      Some i2c fixes over DisplayPort.
      
      * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux:
        drm/radeon: Improve vramlimit module param documentation
        drm/radeon: fix audio pin counts for DCE6+ (v2)
        drm/radeon/dp: switch to the common i2c over aux code
        drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)
        drm/dp/i2c: send bare addresses to properly reset i2c connections (v4)
        drm/radeon/dp: handle zero sized i2c over aux transactions (v2)
        drm/i915: support address only i2c-over-aux transactions
        drm/tegra: dp: Support address-only I2C-over-AUX transactions
      a42892ed
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · ebfc45ee
      Linus Torvalds authored
      Pull more networking fixes from David Miller:
      
       1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI
          context, not synchronize it.  From Chris Mason.
      
       2) Ipv4 flow input interface should never be zero, it should be
          LOOPBACK_IFINDEX instead.  From Cong Wang and Julian Anastasov.
      
       3) Properly configure MAC to PHY connection in mvneta devices, from
          Thomas Petazzoni.
      
       4) sys_recv should use SYSCALL_DEFINE.  From Jan Glauber.
      
       5) Tunnel driver ioctls do not use the correct namespace, fix from
          Nicolas Dichtel.
      
       6) Fix memory leak on seccomp filter attach, from Kees Cook.
      
       7) Fix lockdep warning for nested vlans, from Ding Tianhong.
      
       8) Crashes can happen in SCTP due to how the auth_enable value is
          managed, fix from Vlad Yasevich.
      
       9) Wireless fixes from John W Linville and co.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
        net: sctp: cache auth_enable per endpoint
        tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled
        vlan: Fix lockdep warning when vlan dev handle notification
        seccomp: fix memory leak on filter attach
        isdn: icn: buffer overflow in icn_command()
        ip6_tunnel: use the right netns in ioctl handler
        sit: use the right netns in ioctl handler
        ip_tunnel: use the right netns in ioctl handler
        net: use SYSCALL_DEFINEx for sys_recv
        net: mdio-gpio: Add support for separate MDI and MDO gpio pins
        net: mdio-gpio: Add support for active low gpio pins
        net: mdio-gpio: Use devm_ functions where possible
        ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source()
        ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif
        mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll
        net: mvneta: properly configure the MAC <-> PHY connection in all situations
        net: phy: add minimal support for QSGMII PHY
        sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)
        mwifiex: fix hung task on command timeout
        mwifiex: process event before command response
        ...
      ebfc45ee
    • Linus Torvalds's avatar
      Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 · 6e66d5da
      Linus Torvalds authored
      Pull cifs fixes from Steve French:
       "A set of 5 small cifs fixes"
      
      * 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
        cif: fix dead code
        cifs: fix error handling cifs_user_readv
        fs: cifs: remove unused variable.
        Return correct error on query of xattr on file with empty xattrs
        cifs: Wait for writebacks to complete before attempting write.
      6e66d5da
    • Linus Torvalds's avatar
      Merge tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · 25bfe4f5
      Linus Torvalds authored
      Pull char/misc driver fixes from Greg KH:
       "Here are a few driver fixes for char/misc drivers that resolve
        reported issues.
      
        All have been in linux-next successfully for a few days"
      
      * tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts
        Tools: hv: Handle the case when the target file exists correctly
        vme_tsi148: Utilize to_pci_dev() macro
        vme_tsi148: Fix PCI address mapping assumption
        vme_tsi148: Fix typo in tsi148_slave_get()
        w1: avoid recursive device_add
        w1: fix netlink refcnt leak on error path
        misc: Grammar s/addition/additional/
        drivers: mcb: fix memory leak in chameleon_parse_cells() error path
        mei: ignore client writing state during cb completion
        mei: me: do not load the driver if the FW doesn't support MEI interface
        GenWQE: Increase driver version number
        GenWQE: Fix multithreading problems
        GenWQE: Ensure rc is not returning an uninitialized value
        GenWQE: Add wmb before DDCB is started
        GenWQE: Enable access to VPD flash area
      25bfe4f5
  4. 18 Apr, 2014 9 commits
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.15-rc2' of... · 60fbf2bd
      Linus Torvalds authored
      Merge tag 'driver-core-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
      
      Pull driver core fixes from Greg KH:
       "Here are some driver core fixes for 3.15-rc2.  Also in here are some
        documentation updates, as well as an API removal that had to wait for
        after -rc1 due to the cleanups coming into you from multiple developer
        trees (this one and the PPC tree.)
      
        All have been in linux next successfully"
      
      * tag 'driver-core-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        drivers/base/dd.c incorrect pr_debug() parameters
        Documentation: Update stable address in Chinese and Japanese translations
        topology: Fix compilation warning when not in SMP
        Chinese: add translation of io_ordering.txt
        stable_kernel_rules: spelling/word usage
        sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()
        kernfs: protect lazy kernfs_iattrs allocation with mutex
        fs: Don't return 0 from get_anon_bdev
      60fbf2bd
    • Linus Torvalds's avatar
      Merge tag 'staging-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 8cb652bb
      Linus Torvalds authored
      Pull staging driver fixes from Greg KH:
       "Here are a few staging driver fixes for issues that have been reported
        for 3.15-rc2.
      
        Also dominating the diffstat for the pull request is the removal of
        the rtl8187se driver.  It's no longer needed in staging as a "real"
        driver for this hardware is now merged in the tree in the "correct"
        location in drivers/net/
      
        All of these patches have been tested in linux-next"
      
      * tag 'staging-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: r8188eu: Fix case where ethtype was never obtained and always be checked against 0
        staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0
        staging: r8188eu: Calling rtw_get_stainfo() with a NULL sta_addr will return NULL
        staging: comedi: fix circular locking dependency in comedi_mmap()
        staging: r8723au: Add missing initialization of change_inx in sort algorithm
        Staging: unisys: use after free in list_for_each()
        staging: unisys: use after free in error messages
        staging: speakup: fix misuse of kstrtol() in handle_goto()
        staging: goldfish: Call free_irq in error path
        staging: delete rtl8187se wireless driver
        staging: rtl8723au: Fix buffer overflow in rtw_get_wfd_ie()
        staging: gs_fpgaboot: remove __TIMESTAMP__ macro
        staging: vme: fix memory leak in vme_user_probe()
        staging: fpgaboot: clean up Makefile
        staging/usbip: fix store_attach() sscanf return value check
        staging/usbip: userspace - fix usbipd SIGSEGV from refresh_exported_devices()
        staging: rtl8188eu: remove spaces, correct counts to unbreak P2P ioctls
        staging/rtl8821ae: Fix OOM handling in _rtl_init_deferred_work()
      8cb652bb
    • Linus Torvalds's avatar
      Merge tag 'tty-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 575a2929
      Linus Torvalds authored
      Pull tty/serial driver fixes from Greg KH:
       "Here are a number of small tty/serial driver fixes for 3.15-rc2.  Also
        in here are some Documentation file removals for drivers that we
        removed a long time ago, no need to keep it around any longer.
      
        All of these have been in linux-next for a bit"
      
      * tag 'tty-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        Revert "serial: 8250, disable "too much work" messages"
        serial: amba-pl011: fix regression, causing an Oops on rmmod
        tty: Fix help text of SYNCLINK_CS
        tty: fix memleak in alloc_pid
        ttyprintk: Allow built as a module
        ttyprintk: Fix wrong tty_unregister_driver() call in the error path
        serial: 8250, disable "too much work" messages
        Documentation/serial: Delete obsolete driver documentation
        serial: omap: Fix missing pm_runtime_resume handling by simplifying code
        serial_core: Fix pm imbalance on unbind
        serial: pl011: change Rx burst size to half of trigger level
        serial: timberdale: Depend on X86_32
        serial: st-asc: Fix SysRq char handling
        Revert "serial: clps711x: Give a chance to perform useful tasks during wait loop"
        serial_core: Fix conditional start_tx on ring buffer not empty
        serial: efm32: use $vendor,$device scheme for compatible string
        serial: omap: free the wakeup settings in remove
      575a2929
    • Linus Torvalds's avatar
      Merge tag 'usb-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 7e55f81e
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a number of tiny USB fixes and new device ids for 3.15-rc2.
        Nothing major, just issues some people have reported.
      
        All of these have been in linux-next"
      
      * tag 'usb-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        uas: fix deadlocky memory allocations
        uas: fix error handling during scsi_scan()
        uas: fix GFP_NOIO under spinlock
        uwb: adds missing error handling
        USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver
        USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub feature
        USB: ohci-jz4740: Fix uninitialized variable warning
        USB: EHCI: tegra: set txfill_tuning
        usb: ehci-platform: Return immediately from suspend if ehci_suspend fails
        usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails
        USB: fix crash during hotplug of PCI USB controller card
        USB: cdc-acm: fix double usb_autopm_put_interface() in acm_port_activate()
        usb: usb-common: fix typo for usb_state_string
        USB: usb_wwan: fix handling of missing bulk endpoints
        USB: pl2303: add ids for Hewlett-Packard HP POS pole displays
        USB: cp210x: Add 8281 (Nanotec Plug & Drive)
        usb: option driver, add support for Telit UE910v2
        Revert "USB: serial: add usbid for dell wwan card to sierra.c"
        USB: serial: ftdi_sio: add id for Brainboxes serial cards
      7e55f81e
    • Linus Torvalds's avatar
      Merge branch 'akpm' (incoming from Andrew) · ea2388f2
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton:
       "13 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        thp: close race between split and zap huge pages
        mm: fix new kernel-doc warning in filemap.c
        mm: fix CONFIG_DEBUG_VM_RB description
        mm: use paravirt friendly ops for NUMA hinting ptes
        mips: export flush_icache_range
        mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()
        wait: explain the shadowing and type inconsistencies
        Shiraz has moved
        Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txt
        powerpc/mm: fix ".__node_distance" undefined
        kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write()
        init/Kconfig: move the trusted keyring config option to general setup
        vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()
      ea2388f2
    • Kirill A. Shutemov's avatar
      thp: close race between split and zap huge pages · b5a8cad3
      Kirill A. Shutemov authored
      Sasha Levin has reported two THP BUGs[1][2].  I believe both of them
      have the same root cause.  Let's look to them one by one.
      
      The first bug[1] is "kernel BUG at mm/huge_memory.c:1829!".  It's
      BUG_ON(mapcount != page_mapcount(page)) in __split_huge_page().  From my
      testing I see that page_mapcount() is higher than mapcount here.
      
      I think it happens due to race between zap_huge_pmd() and
      page_check_address_pmd().  page_check_address_pmd() misses PMD which is
      under zap:
      
      	CPU0						CPU1
      						zap_huge_pmd()
      						  pmdp_get_and_clear()
      __split_huge_page()
        anon_vma_interval_tree_foreach()
          __split_huge_page_splitting()
            page_check_address_pmd()
              mm_find_pmd()
      	  /*
      	   * We check if PMD present without taking ptl: no
      	   * serialization against zap_huge_pmd(). We miss this PMD,
      	   * it's not accounted to 'mapcount' in __split_huge_page().
      	   */
      	  pmd_present(pmd) == 0
      
        BUG_ON(mapcount != page_mapcount(page)) // CRASH!!!
      
      						  page_remove_rmap(page)
      						    atomic_add_negative(-1, &page->_mapcount)
      
      The second bug[2] is "kernel BUG at mm/huge_memory.c:1371!".
      It's VM_BUG_ON_PAGE(!PageHead(page), page) in zap_huge_pmd().
      
      This happens in similar way:
      
      	CPU0						CPU1
      						zap_huge_pmd()
      						  pmdp_get_and_clear()
      						  page_remove_rmap(page)
      						    atomic_add_negative(-1, &page->_mapcount)
      __split_huge_page()
        anon_vma_interval_tree_foreach()
          __split_huge_page_splitting()
            page_check_address_pmd()
              mm_find_pmd()
      	  pmd_present(pmd) == 0	/* The same comment as above */
        /*
         * No crash this time since we already decremented page->_mapcount in
         * zap_huge_pmd().
         */
        BUG_ON(mapcount != page_mapcount(page))
      
        /*
         * We split the compound page here into small pages without
         * serialization against zap_huge_pmd()
         */
        __split_huge_page_refcount()
      						VM_BUG_ON_PAGE(!PageHead(page), page); // CRASH!!!
      
      So my understanding the problem is pmd_present() check in mm_find_pmd()
      without taking page table lock.
      
      The bug was introduced by me commit with commit 117b0791. Sorry for
      that. :(
      
      Let's open code mm_find_pmd() in page_check_address_pmd() and do the
      check under page table lock.
      
      Note that __page_check_address() does the same for PTE entires
      if sync != 0.
      
      I've stress tested split and zap code paths for 36+ hours by now and
      don't see crashes with the patch applied. Before it took <20 min to
      trigger the first bug and few hours for second one (if we ignore
      first).
      
      [1] https://lkml.kernel.org/g/<53440991.9090001@oracle.com>
      [2] https://lkml.kernel.org/g/<5310C56C.60709@oracle.com>
      Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Tested-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Bob Liu <lliubbo@gmail.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michel Lespinasse <walken@google.com>
      Cc: Dave Jones <davej@redhat.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: <stable@vger.kernel.org>	[3.13+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b5a8cad3
    • Randy Dunlap's avatar
      mm: fix new kernel-doc warning in filemap.c · b59b8cbc
      Randy Dunlap authored
      Fix new kernel-doc warning in mm/filemap.c:
      
        Warning(mm/filemap.c:2600): Excess function parameter 'ppos' description in '__generic_file_aio_write'
      Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b59b8cbc
    • Davidlohr Bueso's avatar
      mm: fix CONFIG_DEBUG_VM_RB description · a663dad6
      Davidlohr Bueso authored
      This appears to be a copy/paste error.  Update the description to
      reflect extra rbtree debug and checks for the config option instead of
      duplicating CONFIG_DEBUG_VM.
      Signed-off-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Cc: Aswin Chandramouleeswaran <aswin@hp.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a663dad6
    • Mel Gorman's avatar
      mm: use paravirt friendly ops for NUMA hinting ptes · 29c77870
      Mel Gorman authored
      David Vrabel identified a regression when using automatic NUMA balancing
      under Xen whereby page table entries were getting corrupted due to the
      use of native PTE operations.  Quoting him
      
      	Xen PV guest page tables require that their entries use machine
      	addresses if the preset bit (_PAGE_PRESENT) is set, and (for
      	successful migration) non-present PTEs must use pseudo-physical
      	addresses.  This is because on migration MFNs in present PTEs are
      	translated to PFNs (canonicalised) so they may be translated back
      	to the new MFN in the destination domain (uncanonicalised).
      
      	pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma()
      	set and clear the _PAGE_PRESENT bit using pte_set_flags(),
      	pte_clear_flags(), etc.
      
      	In a Xen PV guest, these functions must translate MFNs to PFNs
      	when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting
      	_PAGE_PRESENT.
      
      His suggested fix converted p[te|md]_[set|clear]_flags to using
      paravirt-friendly ops but this is overkill.  He suggested an alternative
      of using p[te|md]_modify in the NUMA page table operations but this is
      does more work than necessary and would require looking up a VMA for
      protections.
      
      This patch modifies the NUMA page table operations to use paravirt
      friendly operations to set/clear the flags of interest.  Unfortunately
      this will take a performance hit when updating the PTEs on
      CONFIG_PARAVIRT but I do not see a way around it that does not break
      Xen.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
      Tested-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Peter Anvin <hpa@zytor.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Steven Noonan <steven@uplinklabs.net>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
      Cc: Cyrill Gorcunov <gorcunov@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      29c77870