- 19 Mar, 2018 3 commits
-
-
Farhan Ali authored
The S390 architecture does not support any graphics hardware, but with the latest support for Virtio GPU in Linux and Virtio GPU emulation in QEMU, it's possible to enable graphics for S390 using the Virtio GPU device. To enable display we need to enable the Linux Virtual Terminal (VT) layer for S390. But the VT subsystem initializes quite early at boot so we need a dummy console driver till the Virtio GPU driver is initialized and we can run the framebuffer console. The framebuffer console over a Virtio GPU device can be run in combination with the serial SCLP console (default on S390). The SCLP console can still be accessed by management applications (eg: via Libvirt's virsh console). Signed-off-by:
Farhan Ali <alifm@linux.vnet.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Message-Id: <e23b61f4f599ba23881727a1e8880e9d60cc6a48.1519315352.git.alifm@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Farhan Ali authored
The Linux Virtual Terminal (VT) layer provides a default keymap which is compiled when VT layer is enabled. But at the same time we are also compiling the EBCDIC keymap and this causes the linker to complain. So let's rename the EBCDIC keymap variables to prevent linker conflict. Signed-off-by:
-
Farhan Ali authored
The 'commit e25df120 ("[S390] Kconfig: menus with depends on HAS_IOMEM.")' added the HAS_IOMEM dependecy for "Graphics support". This disabled the "Graphics support" menu for S390. But if we enable VT layer for S390, we would also need to enable the dummy console. So let's remove the HAS_IOMEM dependency. Move this dependency to sub menu items and console drivers that use io memory. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
- 27 Feb, 2018 6 commits
-
-
Stefan Haberland authored
Set the XRC timestamps even if XRC is not supported by the storage server to help debugging the storage server firmware. Do not advertise valid time stamps if the system time could not be obtained. Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Haberland authored
Reported by smatch that the usage of cqr->block is inconsistent. The sanity check is not needed because _dasd_requeue_request already checks for a valid cqr->block pointer and all referenced ERP requests have a valid cqr->block pointer as well since it is copied during ERP process. Signed-off-by:
Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
s/sene/sense Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Even though s390 compressed kernel support has been introduced long ago, by default uncompressed kernel image is used by packaging targets like: "make rpm-pkg", "make deb-pkg" as well as "make image_name". At the same time "make install" would use compressed bzImage by default. To avoid ambiguity, set bzImage as default image for packaging. Signed-off-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Common code defines linker symbols which denote sections start/end in a form of char []. Referencing those symbols as _symbol or &_symbol yields the same result, but "_symbol" form is more widespread across newly written code. Convert s390 specific code to this style. Also removes unused _text symbol definition in boot/compressed/misc.c. Signed-off-by:
-
Vasily Gorbik authored
Exception table (__ex_table section) is not used during the decompressor phase and could be discarded to save the memory. It is currently generated due to sclp_service_call function (sclp_early_core.c). An assumption is that decompressor usage of sclp_service_call via sclp_early_printk should never trigger exceptions. Signed-off-by:
-
- 22 Feb, 2018 13 commits
-
-
Cornelia Huck authored
This function is checking for the suspend control, not the function control. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Claudio Imbrenda authored
Change the size of the sclp mask to 64 bits. Reviewed-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
-
Claudio Imbrenda authored
Qemu before version 2.11 does not implement the architecture correctly, and does not allow for a mask size of size different than 4. This patch introduces a compatibility mode for such systems, forcing the mask sizes to 4. Since the mask size is currently still 4 anyway, this patch should have no impact whatsoever by itself, but it will be needed when the mask size is increased to 64 bits in the next patch. Reviewed-by:
-
Claudio Imbrenda authored
Switch the layout of the event masks to be a generic buffer, and implement accessors to retrieve the values of the masks. This will be needed in the next patches, where we will eventually switch the mask size to 64 bits. Reviewed-by:
-
Claudio Imbrenda authored
Replace hardcoded instances where 32 or unsigned int (or long) is used for SCLP event masks, and replace with sizeof(sccb_mask_t) and sccb_mask_t respectively. This improves readability and prepares for when we will increase sccb_mask_t to 64 bits. Reviewed-by:
-
Stefan Haberland authored
Make the behavior in case of constant IFCC/CCC errors configurable. Add a sysfs attribute to switch between path disabled after threshold exceeded (default) and message only. Reviewed-by:
-
Peter Oberparleiter authored
Add functions to retrieve data associated with an SCLP Store Data entity. Automatically retrieve data for the "config" entity during boot and make that data available to user-space via sysfs: /sys/firmware/sclp_sd/config/data Reading from this file will return config data contents. /sys/firmware/sclp_sd/config/reload Writing to this file will cause the latest version of data related to the config entity to be read from the SCLP interface. Generate a KOBJ_CHANGE whenever new data is retrieved. Signed-off-by: -
Heiko Carstens authored
Provide base_asce_alloc() and base_asce_free() helper functions which can be used to allocate an ASCE and all required region, segment and page tables required to access memory regions of the virtual kernel address space. Both, the ASCE and all tables, do not use any features that correspond to e.g. enhanced DAT features. This is required for some I/O functions that pass an ASCE, like e.g. some service call requests, but which may not use any enhanced features. Acked-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The system call path can be interrupted before the switch back to the standard branch prediction with BPENTER has been done. The critical section cleanup code skips forward to .Lsysc_do_svc and bypasses the BPENTER. In this case the kernel and all subsequent code will run with the limited branch prediction. Fixes: eacf67eb9b32 ("s390: run user space and KVM guests with modified branch prediction") Signed-off-by: -
Sebastian Ott authored
When we terminate driver I/O (because we need to stop using a certain channel path) we also need to ensure that a timer (which may have been set up using ccw_device_start_timeout) is cleared. Signed-off-by:
-
Sebastian Ott authored
When a timeout occurs for users of ccw_device_start_timeout we will stop the IO and call the drivers int handler with the irb pointer set to ERR_PTR(-ETIMEDOUT). Sometimes however we'd set the irb pointer to ERR_PTR(-EIO) which is not intended. Just set the correct value in all codepaths. Reported-by:
-
Sebastian Ott authored
There are cases a device driver can't start IO because the device is currently in use by cio. In this case the device driver is notified when the device is usable again. Using ccw_device_start_timeout we would set the timeout (and change an existing timeout) before we test for internal usage. Worst case this could lead to an unexpected timer deletion. Fix this by setting the timeout after we test for internal usage. Signed-off-by:
-
Hendrik Brueckner authored
Commit f19fbd5e ("s390: introduce execute-trampolines for branches") introduces .cfi_* assembler directives. Instead of using the directives directly, use the macros from asm/dwarf.h. This also ensures that the dwarf debug information are created in the .debug_frame section. Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
- 19 Feb, 2018 3 commits
-
-
Eugeniu Rosca authored
I've accidentally stumbled upon the IS_ENABLED(EXPOLINE_*) lines, which obviously always evaluate to false. Fix this. Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
-
Stefan Haberland authored
Internal DASD device driver I/O such as query host access count or path verification is started using the _sleep_on() function. To mark a request as started or ended the callback_data is set to either DASD_SLEEPON_START_TAG or DASD_SLEEPON_END_TAG. In cases where the request has to be stopped unconditionally the status is set to DASD_SLEEPON_END_TAG as well which leads to immediate clearing of the request. But the request might still be on a device request queue for normal operation which might lead to a panic because of a BUG() statement in __dasd_device_process_final_queue() or a list corruption of the device request queue. Fix by removing the setting of DASD_SLEEPON_END_TAG in the dasd_cancel_req() and dasd_generic_requeue_all_requests() functions and ensure that the request is not deleted in the requeue function. Trigger the device tasklet in the requeue function and let the normal processing cleanup the request. Signed-off-by:
-
Linus Torvalds authored
-
- 18 Feb, 2018 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
-
- 17 Feb, 2018 11 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - meson-gx: Revert to earlier tuning process - bcm2835: Don't overwrite max frequency unconditionally * tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: bcm2835: Don't overwrite max frequency unconditionally Revert "mmc: meson-gx: include tx phase in the tuning process"
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull mtd fixes from Boris Brezillon: - add missing dependency to NAND_MARVELL Kconfig entry - use the appropriate OOB layout in the VF610 driver * tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA mtd: nand: vf610: set correct ooblayout
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "The main attraction is a fix for a bug in the new drmem code, which was causing an oops on boot on some versions of Qemu. There's also a fix for XIVE (Power9 interrupt controller) on KVM, as well as a few other minor fixes. Thanks to: Corentin Labbe, Cyril Bur, Cédric Le Goater, Daniel Black, Nathan Fontenot, Nicholas Piggin" * tag 'powerpc-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Check for zero filled ibm,dynamic-memory property powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n powerpc/powernv: IMC fix out of bounds memory access at shutdown powerpc/xive: Use hw CPU ids when configuring the CPU queues powerpc: Expose TSCR via sysfs only on powernv
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "The bulk of this is the pte accessors annotation to READ/WRITE_ONCE (we tried to avoid pushing this during the merge window to avoid conflicts) - Updated the page table accessors to use READ/WRITE_ONCE and prevent compiler transformation that could lead to an apparent loss of coherency - Enabled branch predictor hardening for the Falkor CPU - Fix interaction between kpti enabling and KASan causing the recursive page table walking to take a significant time - Fix some sparse warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cputype: Silence Sparse warnings arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables arm64: proc: Set PTE_NG for table entries to avoid traversing them twice arm64: Add missing Falkor part number for branch predictor hardening -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - fixes for the Xen pvcalls frontend driver - fix for booting Xen pv domains - fix for the xenbus driver user interface * tag 'for-linus-4.16a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: wait for other operations to return when release passive sockets pvcalls-front: introduce a per sock_mapping refcount x86/xen: Calculate __max_logical_packages on PV domains xenbus: track caller request id
-
Stefano Stabellini authored
Passive sockets can have ongoing operations on them, specifically, we have two wait_event_interruptable calls in pvcalls_front_accept. Add two wake_up calls in pvcalls_front_release, then wait for the potential waiters to return and release the sock_mapping refcount. Signed-off-by:
Stefano Stabellini <stefano@aporeto.com> Acked-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Stefano Stabellini authored
Introduce a per sock_mapping refcount, in addition to the existing global refcount. Thanks to the sock_mapping refcount, we can safely wait for it to be 1 in pvcalls_front_release before freeing an active socket, instead of waiting for the global refcount to be 1. Signed-off-by:
-
Prarit Bhargava authored
The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a732 ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Tested-and-reported-by:
Simon Gaiser <simon@invisiblethingslab.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: xen-devel@lists.xenproject.org Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Joao Martins authored
Commit fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by:
Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
-
Robin Murphy authored
Sparse makes a fair bit of noise about our MPIDR mask being implicitly long - let's explicitly describe it as such rather than just relying on the value forcing automatic promotion. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
