Getting rid of wl_cfg80211 specific error log macro.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The source file wl_cfg80211.c has its own debug macros and levels.
This patch maps the macros to the ones used in the rest of the
brcmfmac driver.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The call to brcmf_dbg(ERROR, ...) only resulted in a log message
when compiled with -DDEBUG. Error messages are valuable for resolving
issues so this patch replaces it with brcmf_err(...) so they always
end up in the log.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Currently, adding a new event requires modification in two source
files. Use macro definition to have one place and have better
maintainability.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Using gcc v4.7.2 gave following warning:

  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/aiutils.o
brcmsmac/aiutils.c: In function 'ai_deviceremoved':
brcmsmac/aiutils.c:733:9: error: 'w' may be used uninitialized
in this function [-Werror=uninitialized]

Inspection of the pci_read_config_dword() function showed it can
return without modifying the output variable 'w' so this patch
initializes it to 0.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Rework the bus interface between common driver part and bus-specific
driver part. It prepares for adding tracing in bus-specific callback
functions.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Luciano Coelho <coelho@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Herton Ronaldo Krzesinski <herton@canonical.com>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Dan Williams <dcbw@redhat.com>
Cc: libertas-dev@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Cc: Intel Linux Wireless <ilw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Kan Yan <kanyan@broadcom.com>
Cc: brcm80211-dev-list@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: b43-dev@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org
Cc: ath5k-devel@lists.ath5k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Register the watchdog driver to the system if it is a SoC. Using the
watchdog on a non SoC device, like a PCI card, will make the PCI
card die when the timeout expired, but starting it again is not
supported by ssb.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The watchdog driver wants to set the watchdog timeout in ms and not in
ticks, add a method converting ms to ticks before setting the watchdog
register. Return the ticks or millisecond the timer was set to in case
the provided value was bigger than the max allowed value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Prevent the watchdog register on the extif core to be set to a too
high value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The watchdog driver wants to set the watchdog timeout in ms and not in
ticks, which is depending on the SoC type and the clock.
Calculate the number of ticks per millisecond and provide two functions
for the watchdog driver. Also return the ticks or millisecond the timer
was set to in case the provided value was bigger than the max allowed
value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Some ssb based devices have a PMU and the PMU watchdog register should
be used instead of the register in the chip common part, if the device
has a PMU. This patch also calculates the maximal number the watchdog
could be set to.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If there is a PMU in the device, get the alp clock from that part and
do not assume 20000000.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Register the watchdog driver to the system if this is a SoC. Using the
watchdog on a non SoC device, like a PCIe card, will make the PCIe
card die when the timeout expired, but starting it again is not
supported by bcma.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The watchdog driver wants to set the watchdog timeout in ms and not in
ticks, which is depending on the SoC type and the clock.
Calculate the number of ticks per millisecond and provide two functions
for the watchdog driver. Also return the ticks or millisecond the timer
was set to in case the provided value was bigger than the max allowed
value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Mostly all bcma based devices have a PMU and the PMU watchdog should be
used and not the old one in chip common. This patch also calculates the
maximal number the watchdog could be set to.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

For devices without a PMU the alp clock is always 20000000.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This adds a common header for watchdog functions, so a watchdog driver
just needs to use this and could provide watchdog functionality for ssb
and bcma based SoCs. Patches for a watchdog driver using this interface
will be send later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We have assinged error code to 'ret' when get auth from some
option is not supported but never used it, but we'd better return
the error code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Otherwise rt2500* triggers a warning in cfg80211, from net/wireless/core.c:

	/* Combinations with just one interface aren't real */
	if (WARN_ON(c->max_interfaces < 2))

This was introduced in commit 55d2e9da:
rt2x00: Replace open coded interface checking with interface combinations.
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: stable@vger.kernel.org [3.7+]
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Dan Carpenter reported that smatch detected a potential
problem with the code [1]:
 drivers/net/wireless/ath/carl9170/tx.c:1488 carl9170_op_tx()
  error: we previously assumed 'sta' could be null (see line 1482)

 drivers/net/wireless/ath/carl9170/tx.c
  1482  if (sta) {
           ^^^^^ New check.
  [...]
  1485  }
  1487  if (info->flags & IEEE80211_TX_CTL_AMPDU) {
  1488    run = carl9170_tx_ampdu_queue(ar, sta, skb);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   Old dereference of "sta" inside the call to carl9170_tx_ampdu_queue().

A range of solutions have been discussed in [2] and
we agreed on the following: "
> we might as well add a comment to carl9170_tx_ampdu_queue
> and explain the situation [in a way that's obvious to a
> human reader]. This way we can save the "if"... which is
> a small win since carl9170_op_tx is sort of a hot-path.
Putting a comment there is fine. Without the comment
it's easy for a human reader to get confused why the
check is there. So long as humans can read the code,
that's all that matters."

[1] <http://www.spinics.net/lists/linux-wireless/msg94526.html>
[2] <http://www.spinics.net/lists/linux-kernel-janitors/msg14953.html>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

spinlock_t should always be used.

  LD      drivers/net/wireless/brcm80211/built-in.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/fwil.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/fwil.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/fweh.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/fweh.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/dhd_common.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/usb.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/usb.o
  CHECK   drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
  CC [M]  drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.o
  LD [M]  drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.o
  LD      drivers/net/wireless/brcm80211/brcmsmac/built-in.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c:1311:6: warning: context imbalance in 'brcms_down' - unexpected unlock
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c:1598:6: warning: context imbalance in 'brcms_rfkill_set_hw_state' - unexpected unlock
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/ucode_loader.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/ucode_loader.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/ampdu.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/antsel.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/antsel.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/channel.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/channel.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/main.c
drivers/net/wireless/brcm80211/brcmsmac/main.c:6246:36: warning: Initializer entry defined twice
drivers/net/wireless/brcm80211/brcmsmac/main.c:6246:43:   also defined here
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/main.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy_shim.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/pmu.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/pmu.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/rate.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/rate.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/stf.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/stf.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/aiutils.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c:3313:46: warning: cast truncates bits from constant value (ffff7fff becomes 7fff)
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:17688:47: warning: cast truncates bits from constant value (ffff7fff becomes 7fff)
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:18187:53: warning: cast truncates bits from constant value (ffff3fff becomes 3fff)
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:21160:36: warning: cast truncates bits from constant value (ffff3fff becomes 3fff)
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:23321:35: warning: cast truncates bits from constant value (ffff7fff becomes 7fff)
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:28343:44: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/phy/phy_qmath.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/phy/phy_qmath.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/dma.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/dma.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/brcms_trace_events.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/brcms_trace_events.o
  CHECK   drivers/net/wireless/brcm80211/brcmsmac/debug.c
  CC [M]  drivers/net/wireless/brcm80211/brcmsmac/debug.o
  LD [M]  drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.o
  LD      drivers/net/wireless/brcm80211/brcmutil/built-in.o
  CHECK   drivers/net/wireless/brcm80211/brcmutil/utils.c
  CC [M]  drivers/net/wireless/brcm80211/brcmutil/utils.o
  LD [M]  drivers/net/wireless/brcm80211/brcmutil/brcmutil.o
  Building modules, stage 2.
  MODPOST 3 modules
  CC      drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.mod.o
  LD [M]  drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
  CC      drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.mod.o
  LD [M]  drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
  CC      drivers/net/wireless/brcm80211/brcmutil/brcmutil.mod.o
  LD [M]  drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Kan Yan <kanyan@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list@broadcom.com
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>