- 30 Jan, 2014 6 commits
-
-
Ben Widawsky authored
This helps make an upcoming patch a bit more reviewable Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
Create logical sections in an attempt to clean up, and continue to keep future additions clean. v2: Reworded the comments. Added section headers (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
The code has become quite hairy. By relocating all the generic registers it will become more obvious where future ones should go. There is still admittedly a bit of confusion left for things like per ring registers. A subsequent patch will clean this function up. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Backmerge drm-next - I need to backmerge drm-intel-fixes patches touching the error capture code to be able to merge Ben's cleanup patches. Conflicts: drivers/gpu/drm/i915/i915_gpu_error.c Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next more fixes for nouveau. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
more radeon fixes * 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking
-
- 29 Jan, 2014 30 commits
-
-
Ilia Mirkin authored
If either idling channels or suspending the fence were to fail, the display would never be resumed. Also if a client fails, resume the fence (not functionally important, but it would potentially leak memory). See https://bugs.freedesktop.org/show_bug.cgi?id=70213Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Maarten Lankhorst authored
Fixes a regression introduced by d5c1e84b "drm/nouveau: hold mutex while syncing to kernel channel". Cc: stable@vger.kernel.org #3.13 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The DRM uses the adjusted mode to calculate constants for vblank timestamping. Our encoder mode_fixup (usually) replaces this data with our backend mode information, which doesn't have the needed data filled in already. Reported-by: Mario Kleiner mario.kleiner.de@gmail.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Daniel Vetter authored
Request by Ben Widawsky in his review of a patch touching this code. v2: Clarify the disdinction between evicting vmas (to free up virtual address space) and evicting objects (to free up actual system memory). Suggested by Ben. Cc: Ben Widawsky <benjamin.widawsky@intel.com> Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Alex Deucher authored
Some DCE8 boards have a funky BlankCrtc table that results in a timeout when trying to blank the display. The timeout is harmless (all operations needed from the table are complete), but wastes time and is confusing to users so work around it. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
This is effectively a revert of 4573388c. Forcing a display active when there is none causes problems with dpm on some SI boards which results in improperly initialized dpm state and boot failures on some boards. As for the bug commit 4573388c tried to address, one can manually force the state to high for better performance when using the card as a headless compute node until a better fix is developed. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=73788 https://bugs.freedesktop.org/show_bug.cgi?id=69395Signed-off-by: Alex Deucher <alexander.deucher@amd.com> cc: stable@vger.kernel.org
-
Chris Wilson authored
During eviction, we are only considering how to free up space within the current address space and not concerned with freeing up physical memory. As such we need only skip nodes that pinned in the current VM and not globally. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Alex Deucher authored
DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
If we are not able to properly initialize one of the gpu engines for buffer paging, we limit vram to the size of the cpu visible aperture. We generally either use the gfx or dma engine to do this. Clean up the size limiting code to only adjust the size based on what ring is selected for buffer paging rather than making assumptions about which engine is selected for paging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
-
Alex Deucher authored
The hw is buggy and it's not currently used, but it's currently still initialized by the driver. Skip the init. Skipping init also seems to improve stability with dpm on some r6xx asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=66963Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
-
Alex Deucher authored
Prevent runtime suspend of non-PX GPUs. Runtime suspend is not what we want in those cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Christian König authored
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Otherwise we allocate a new VMID on nearly every submit. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Imre Deak authored
The initial jiffies value can be non-0, so set the inital panel power sequencer timestamps accordingly. This didn't cause a problem on 64 bit machines but on 32 bit jiffies is initially -300*HZ, so if the panel power is initally off in the call from edp_panel_vdd_on()-> wait_panel_power_cycle() we'd wait up to ~300 sec more than needed. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Imre Deak authored
schedule_timeout_uninterruptible() takes jiffies not ms. v2: - ignore the overflow issue, the practical part of that should be solved instead in the caller (Chris) Note that this issue was introduced in commit dce56b3c Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Thu Dec 19 14:29:40 2013 -0200 drm/i915: save some time when waiting the eDP timings I've accidentally merged the broken v4 version of the patch (where Jani noticed the issue [1]) instead of the v5, which was fixed [2]. [1] http://mid.gmane.org/87fvpnkgyg.fsf@intel.com [2] http://mid.gmane.org/1388778311-2020-1-git-send-email-przanoni@gmail.comSigned-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add admission of incompetence in the form of a note.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
When current delay is already at max delay, Let's disable the PM UP THRESHOLD INTRRUPTS, so that we will not get further interrupts until current delay is less than max delay, Also request for the PM DOWN THRESHOLD INTRRUPTS to indicate the decrease in clock freq. and viceversa for PM DOWN THRESHOLD INTRRUPTS. v2: Use bool variables (Daniel) v3: Fix Interrupt masking bit (Deepak) v4: Use existing symbolic constants in i915_reg.h (Daniel) v5: Add pm interrupt mask after new_delay calculation (Ville) Signed-off-by: Deepak S <deepak.s@intel.com> [danvet: Pass new_delay by value as suggested by Ville. Also appease checkpatch.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We're disabling a boatload of clock gating features on VLV. Maybe these days we don't need to do that. At least I'm not aware of any workarounds with this level of paranoia. This reverts commit 4e8c84a5. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
WaDisable4x2SubspanOptimization isn't listed for VLV in the workaround database, but BSpec says that the relevant bit must be set. Add a comment to remind people of this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Call gen7_setup_fixed_func_scheduler() on VLV as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
BSpec states that the thread override values set by gen7_setup_fixed_func_scheduler() are invalid for HSW. So let's not muck around with them. Since gen7_setup_fixed_func_scheduler() now has two totally independent parts, one for IVB and one for HSW, move the HSW part directly into haswell_init_clock_gating(). Note tht there's another workaround by the name of WaHSWVSRefCountFullforceMissDisable which basically claims that later steppings don't need the fix, but since WaVSRefCountFullforceMissDisable is listed to be needed for all steppings play it safe and keep applying the workaround. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The current comments indicate that this function implements WaVSRefCountFullforceMissDisable, which is only true for HSW. The original purpose of the function is to implement WaVSThreadDispatchOverride (and a bit more). Fix up the comments to match reality. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
WaDisableTDLUnitClockGating is only relevant for early steppings of VLV. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
WaDisableVDSUtnitClockGating was only relevant for early steepings of VLV. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
-
Dave Airlie authored
these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of -fixes all over the place. Lot's of cc: stable. Only big thing is that we've dropped the preliminary hw support tag for bdw - it seems to work. Which also means that I'll shovel a few more bdw patches through -fixes, there's 5 w/a patches from Ken already on intel-gfx. * tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the offset issue for the stolen GEM objects drm/i915: Decouple GPU error reporting from ring initialisation i915: remove pm_qos request on error Revert "drm/i915: Mask reserved bits in display/sprite address registers" drm/i915: VLV2 - Fix hotplug detect bits drm/i915: Allow reading the TIMESTAMP register on Gen8. drm/i915: Repeat evictions whilst pageflip completions are outstanding drm/i915: Wait for completion of pending flips when starved of fences drm/i915: don't disable DP port after a failed link training drm/i915: don't disable the DP port if the link is lost drm/i915: Eliminate lots of WARNs when there's no backlight present drm/i915: g4x/vlv: fix dp aux interrupt mask drm/i915/ppgtt: Defer request freeing on reset i915: send D1 opregion notification drm/i915/bdw: remove preliminary_hw_support flag from BDW drm/i915: Tune down reset_stat output from ERROR to debug drm/i915: Make semaphore modparam RO drm/i915: Fix disabled semaphores drm/i915: Clarify relocation errnos drm/i915: Spelling s/auxilliary/auxiliary/
-
- 28 Jan, 2014 4 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie authored
Just one-liner which corrects a select statement for DRM_KMS_FB_HELPER which looks like it was missed in the initial merge. Based on 3.13. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: (55 commits) DRM: armada: fix missing DRM_KMS_FB_HELPER select
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm patches for 3.14 * tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: Enable DT support for DMM drm/omap: fix: change dev_unload order drm/omap: fix: disable encoder before destroying it drm/omap: fix: disconnect devices when omapdrm module is removed drm/omap: fix: Defer probe if an omapdss device requests for it at connect drm/omap: fix (un)registering irqs inside an irq handler Conflicts: drivers/gpu/drm/omapdrm/omap_drv.c
-
git://github.com/patjak/drm-gma500Dave Airlie authored
Only two patches this time around. One trivial and one locking fix. * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500: Lock struct_mutex around cursor updates drivers: gpu: Mark function as static in cdv_intel_dp.c
-
Ville Syrjälä authored
Add a few new debugfs files which allow changing the watermark memory latency values during runtime. This can be used to determine the if the original BIOS provided latency values are no good. v2: Drop superfluous plane name from output Take modeset locks around the latency value read/write Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-