- 27 Mar, 2014 7 commits
-
-
Ying Xue authored
Due to the lacking of any credential, it's allowed to accept commands requested from remote nodes to query the local node status, which is prone to involve potential security risks. Instead, if we login to a remote node with ssh command, this approach is not only more safe than the remote management feature, but also it can give us more permissions like changing the remote node configuration. So it's reasonable for us to obsolete the remote management feature now. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ying Xue authored
tipc_node_create routine doesn't need to check whether a node object specified with a node address exists or not because its caller(ie, tipc_disc_recv_msg routine) has checked this before calling it. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Byungho An says: ==================== This is 14th posting for SAMSUNG SXGBE driver. Changes since v1: - changed name of driver to SXGbE as per Ben's comment - squashed Joe's neatening for many stuff in original patches Changes since v2: - updated and split binding document as per Mark's comment - clean up codes as per Joe's comment - removed unused fields and clean up codes as per Francois's comment - removed module parameters as per Dave's comment - moved driver directory to samsung/sxgbe/ Changes since v3: - fixed Missing a blank line after declarations as per Dave's comment - clean up codes as per Joe's comment - removed reference of net_device.{irq, base_addr} as per Francois's comment Changes since v4: - updated binding document and DT related function as per Mark's comment Changes since v5: - updated binding document and DT related function as per Florian's comment - fixed typo and shortened code as per Joe's comment Changes since v6: - updated TSO related functions as per Rayagond's comment - updated binding document as per Mark's comment - removed WoL patch from this patch set Changes since v7: - updated TSO related functions as per Rayagond's comment Changes since v8: - removed select and depends statement from vendor sub-section as per Dave's comment Changes since v9: - removed adv-add-map, force-sf-dma-modei and force-thresh-dma-mode from binding documnet as per Mark's comment Changes since v10: - clean up codes as per Francois's comment Changes since v11: - clean up mdio_read/write codes as per Francois's comment - changed irq acquisition error path as per Francois's comment - updated mdio and platform related codes as per Tomasz'comment - clean up dma related codes as per Vince's comment Changes since v12: - fixed typo Changes since v13: - clean up error path codes for irqs as per Francois's comment - removed unsupported functions for ehttoolirq as per Ben's comment ==================== Signed-off-by: -
Monam Agarwal authored
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by:
-
Monam Agarwal authored
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
-
Monam Agarwal authored
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
-
Monam Agarwal authored
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
-
- 26 Mar, 2014 33 commits
-
-
Byungho An authored
Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Vipul Pandya authored
This patch adds ethtool related functions. Signed-off-by:
Vipul Pandya <vipul.pandya@samsung.com> Neatening-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Vipul Pandya authored
This patch adds TX and RX checksum offload support. Signed-off-by:
-
Vipul Pandya authored
Enable TSO during initialization for each DMA channels Signed-off-by:
-
Girish K S authored
Added support for the EEE(Energy Efficient Ethernet) in 10G ethernet driver. Signed-off-by:
Girish K S <ks.giri@samsung.com> Neatening-by:
-
Siva Reddy authored
This patch adds support for Samsung 10Gb ethernet driver(sxgbe). - sxgbe core initialization - Tx and Rx support - MDIO support - ISRs for Tx and Rx - ifconfig support to driver Signed-off-by:
Siva Reddy Kallam <siva.kallam@samsung.com> Signed-off-by:
-
Siva Reddy authored
This patch adds binding document for SXGBE ethernet driver via device-tree. Signed-off-by:
-
Christian Riesch authored
Signed-off-by:
Christian Riesch <christian.riesch@omicron.at> Cc: Dong Zhu <bluezhudong@gmail.com> Signed-off-by:
-
Manfred Rudigier authored
Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Ding Tianhong says: ==================== bonding: support QinQ for bond arp interval v1->v2: remvoe the comment "TODO: QinQ?". convert pr_xxx() to pr_xxx_ratelimited() for arp interval. v2->v3: remove the unnecessary log for arp interval and add net ratelimit to avoid spam log. v3->v4: Add ratelimit for debugging is not a good idea, it will miss some message if the user turns the debugging on, so don't add ratelimited on debugging. ==================== Signed-off-by: -
dingtianhong authored
Remove the unnecessary log and add net_ratelimit to the others, in order to avoid spam the log. Cc: Joe Perches <joe@perches.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
dingtianhong authored
The bond send arp request to indicate that the slave is active, and if the bond dev is a vlan dev, it will set the vlan tag in skb to notice the vlan group, but the bond could only send a skb with 802.1q proto, not support for QinQ. So add outer tag for lower vlan tag and inner tag for upper vlan tag to support QinQ, The new skb will be consist of two vlan tag just like this: dst mac | src mac | outer vlan tag | inner vlan tag | data | ..... If We don't need QinQ, the inner vlan tag could be set to 0 and use outer vlan tag as a normal vlan group. Using "ip link" to configure the bond for QinQ and add test log: ip link add link bond0 bond0.20 type vlan proto 802.1ad id 20 ip link add link bond0.20 bond0.20.200 type vlan proto 802.1q id 200 ifconfig bond0.20 11.11.20.36/24 ifconfig bond0.20.200 11.11.200.36/24 echo +11.11.200.37 > /sys/class/net/bond0/bonding/arp_ip_target 90:e2:ba:07:4a:5c (oui Unknown) > Broadcast, ethertype 802.1Q-QinQ (0x88a8),length 50: vlan 20, p 0,ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 11.11.200.37 tell 11.11.200.36, length 28 90:e2:ba:06:f9:86 (oui Unknown) > 90:e2:ba:07:4a:5c (oui Unknown), ethertype 802.1Q-QinQ (0x88a8), length 50: vlan 20, p 0, ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Reply 11.11.200.37 is-at 90:e2:ba:06:f9:86 (oui Unknown), length 28 v1->v2: remove the comment "TODO: QinQ?". Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
dingtianhong authored
The vlan support 2 proto: 802.1q and 802.1ad, so make a new function called vlan_dev_vlan_proto() which could return the vlan proto for input dev. Signed-off-by:
-
David S. Miller authored
Ding Tianhong says: ==================== bonding: slight optimization and avoid spam for bond xmit path v1->v2: Add ratelimit for debugging is not a good idea, it will miss some message if the user turns the debugging on, so remove the patch 3. use net_err_ratelimited instead of pr_err_ratelimited and use __func__ instead of bond_xmit_broadcast(). ==================== Signed-off-by: -
dingtianhong authored
It may spam if the system is out of the memory, add ratelimit for it. Signed-off-by:
-
dingtianhong authored
Add unlikely() micro to the unlikely conditions in the bond xmit path for slight optimization. Signed-off-by:
-
Zoltan Kiss authored
Ian made some late comments about the grant mapping series, I incorporated the functional outcomes into this patch: - use callback_param macro to shorten access to pending_tx_info in xenvif_fill_frags() and xenvif_tx_submit() - print an error message in xenvif_idx_unmap() before panic Signed-off-by:
Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by:
-
Zoltan Kiss authored
Ian made some late comments about the grant mapping series, I incorporated the non-functional outcomes into this patch: - typo fixes in a comment of xenvif_free(), and add another one there as well - typo fix for comment of rx_drain_timeout_msecs - remove stale comment before calling xenvif_grant_handle_reset() Signed-off-by:
-
Zoltan Kiss authored
Since the early days TX stops if there isn't enough free pending slots to consume a maximum sized (slot-wise) packet. Probably the reason for that is to avoid the case when we don't have enough free pending slot in the ring to finish the packet. But if we make sure that the pending ring has the same size as the shared ring, that shouldn't really happen. The frontend can only post packets which fit the to the free space of the shared ring. If it doesn't, the frontend has to stop, as it can only increase the req_prod when the whole packet fits onto the ring. This patch avoid using this checking, makes sure the 2 ring has the same size, and remove a checking from the callback. As now we don't stop the NAPI instance on this condition, we don't have to wake it up if we free pending slots up. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: bcm7xxx: workaround updates This patch updates the BCM7xxx internal PHY workaround, this time with defines for the registers we are touching. ==================== Signed-off-by: -
Florian Fainelli authored
The AFE_RX_LP_COUNTER kept the last 3 bits set, which would not properly clear the EEE LPI mode errors bits. Make sure that those bits are set to 0 to ensure the PHY timing is always good even during EEE wake-up. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL registers turned out to unveil some spurious MDIO read/write failures which would make the workaround partially applied. The fix is to write first to the VCO, RCAL, RC_CAL registers, and then write to the AFE registers. Signed-off-by:
-
Florian Fainelli authored
Define constants for the various registers used in bcm7xxx_28nm_afe_config_init() to help clarify what this workaround is about. Signed-off-by:
-
Tom Herbert authored
The packet hash can be considered a property of the packet, not just on RX path. This patch changes name of rxhash and l4_rxhash skbuff fields to be hash and l4_hash respectively. This includes changing uses of the field in the code which don't call the access functions. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
-
Joe Perches authored
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
-
Joe Perches authored
Using addressof then casting to the original type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast.cocci @@ type T; T foo; @@ - (T *)&foo + &foo Signed-off-by:
-
Fabio Estevam authored
Having the kernel to print: "smsc911x: Driver version 2008-10-21" on every boot is not very useful, so remove the print of the driver version. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
With debug enabled we get the following message: smsc911x smsc911x (unregistered net_device): couldn't get clock -2 As the device has not been registered at this point, it is better to use dev_dbg() instead of netdev_dbg(). CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Suggested-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Peter Pan(潘卫平) authored
After commit d4589926 (tcp: refine TSO splits), tcp_nagle_check() does not use parameter mss_now anymore. Signed-off-by:
Weiping Pan <panweiping3@gmail.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: SR-IOV patch series (With the exception of the first patch) This series contains IOV-related patches, where the main changes are related to the driver's IOV-support backbone - it adds a new workqueue for IOV related tasks and removes the vfop mechanism from the driver. Please consider applying this series to `net-next'. ==================== Signed-off-by: -
Yuval Mintz authored
Currently, if a VF's Rx Mode will be configured to support promiscuous mode the PF will comply, causing the VF to actually become promiscuous. This will enable the VF to see all unicast traffic which might be intended for other VMs, which we believe should not be possible. This patch will cause the hypervisor to ignore the VF's request for changes in its Rx mode (other than disabling it), preventing it from becoming promiscuous. Reported-by:
Yoann Juet <yoann.juet@univ-nantes.fr> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
