- 29 Jan, 2019 12 commits
-
-
Bart Van Assche authored
Since the function scsi_to_u32() is identical to get_unaligned_be32(), change all scsi_to_u32() calls into get_unaligned_be32() calls. Cc: Jian Luo <luojian5@huawei.com> Cc: John Garry <john.garry@huawei.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There are two statements that are indented incorrectly. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: qla2xxx-upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: QLogic-Storage-Upstream@cavium.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Satish Kharat <satishkh@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Varun Prakash <varun@chelsio.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oza Pawandeep <poza@codeaurora.org> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. [mkp: removed unused label] Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Johannes Thumshirn authored
I'll be moving on to different things in the storage stack and Hannes agreed to take over FCoE. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
There's no need to export fcoe_ctlr_destroy_store as a symbol, so remove the EXPORT_SYMBOL() line for it. Cc: Johannes Thumshirn <jth@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by:
-
Greg Kroah-Hartman authored
We are trying to get rid of BUS_ATTR() and the usage of that in the fcoe driver can be trivially converted to use BUS_ATTR_WO(), so use that instead. Cc: Johannes Thumshirn <jth@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by:
-
- 23 Jan, 2019 26 commits
-
-
Ching Huang authored
From Ching Huang <ching2048@areca.com.tw> Update driver version to v1.40.00.10-20190116. Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Signed-off-by:
-
Ching Huang authored
From Ching Huang <ching2048@areca.com.tw> For ACB_ADAPTER_TYPE_B controller, the read/write after hibernate and resume may sometimes result in 'isr get an illegal ccb command' in /var/log/messages. This patch fixes it. Signed-off-by:
-
Ching Huang authored
From Ching Huang <ching2048@areca.com.tw> dma_zalloc_coherent will be phased out. Use dma_alloc_coherent instead. Signed-off-by:
-
Satish Kharat authored
Update fnic driver to version 1.6.0.47. Signed-off-by:
-
Satish Kharat authored
This patch adds changes to check if fnic devcmd2 interface is exported by the firmware. If devcmd2 interfaces is exported, driver starts using it else falls back to fnic devcmd1 interface. Signed-off-by:
-
Satish Kharat authored
This patch adds fnic devcmd2 interfaces for initialization and posting commands to fw. Signed-off-by:
-
Satish Kharat authored
This patch adds the devcmd2 wq initalization and devcmd2 ring allocation helper interfaces used by devcmd2 init. [mkp: typos] Signed-off-by:
-
Satish Kharat authored
This patch adds the fnic devcmd2 controller definitions. Signed-off-by:
-
Satish Kharat authored
This patch adds the fnic devcmd2 command structre and the command result structure definitions. Signed-off-by:
-
Satish Kharat authored
Impose an upper limit on the max number of CQ entries (corresponding to the copy wq) processed in an interrupt. Use module parameter to set the limit. Signed-off-by:
-
Satish Kharat authored
Do RQ enable before posting descriptor. This is needed for later hw revisions. Signed-off-by:
-
Satish Kharat authored
Doing vnic_device_enable before this could cause interrupts to happen before they are setup. Signed-off-by:
-
Satish Kharat authored
The change is to print warning when scsi done is called for an IO that has not yet been issued to the fw. Also adding sc and tag to debug print when IO is cleaned up. Signed-off-by:
-
Satish Kharat authored
This change is to add fnic stats for the max number of CQs (corresponding to copy WQ) processed in a given interrupt, max time taken by the ISR. Signed-off-by:
-
Satish Kharat authored
This patch adds the current fnic port speed stat to fnic debug stats. Signed-off-by:
-
Satish Kharat authored
Need to use fnic_lock as well as host lock in that order to set state flags. [mkp: typos] Signed-off-by:
-
Satish Kharat authored
rq->ctrl not enabled when this is called is bad but not fatal and can continue. Signed-off-by:
-
Satish Kharat authored
This patch changes the default lun queuedepth for fnic to 256. Signed-off-by:
-
Satish Kharat authored
This patch is to add fnic 20G port speed display in sysfs. [mkp: typo] Signed-off-by:
-
Bart Van Assche authored
From scsi_init_command(), a function called by scsi_mq_prep_fn(): /* zero out the cmd, except for the embedded scsi_request */ memset((char *)cmd + sizeof(cmd->req), 0, sizeof(*cmd) - sizeof(cmd->req) + dev->host->hostt->cmd_size); In other words, scsi_mq_prep_fn() clears scsi_cmnd.flags. Hence move the clear_bit() call into the else branch, the only branch in which this code is necessary. See also commit f1342709 ("scsi: Do not rely on blk-mq for double completions"). Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Bart Van Assche authored
This patch makes the source code more uniform and does not change any functionality. Reviewed-by:
-
Martin K. Petersen authored
Rework sd_setup_read_write_cmnd() so it becomes more readable. Put all the sanity checking at the head of the function and sanitize the logged error messages. Move the legacy SCSI logging calls to the end of the functions and reduce conditional nesting. Reviewed-by:
-
Martin K. Petersen authored
Create a helper function for each of the 6, 10, 16 and 32-byte READ/WRITE variants and use those when setting up reads and writes. Reviewed-by:
-
Martin K. Petersen authored
Avoid open coding the checks for the supported logical block sizes and use a mask to check for misaligned I/O. Use our helper functions to scale lba and block count. Reviewed-by:
-
Martin K. Petersen authored
We have had several bugs due mixing sector and logical block size terminology. In the block layer, a sector is a 512-byte unit regardless of the logical block size of the underlying device. But the term "sector" is still widely used in sd.c when referring to logical block sized units. We previously introduced helper functions such as sectors_to_logical() and logical_to_sectors() to make the distinction clear. Use these to make the code in sd.c consistent wrt. logical blocks and block layer sectors. Use "lba" to describe a logical block address and "nr_blocks" when counting logical blocks. SBC uses "TRANSFER LENGTH" to describe the latter but this term was avoided to prevent confusion with the very similar DMA transfer size (->transfersize) which is counted in bytes. Reviewed-by:
-
Bart Van Assche authored
This patch does not change any functionality. Reviewed-by:
-
- 12 Jan, 2019 2 commits
-
-
Evan Green authored
CONFIG_SCSI_UFS_QCOM selects CONFIG_PHY_QCOM_UFS, assuming that this was the only possible PHY driver Qualcomm's UFS controller would use. But in SDM845, the UFS driver is bundled into phy-qcom-qmp, and phy-qcom-ufs is unused. Remove the select, since for SDM845 it adds useless drivers to the build. Signed-off-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
-
Otto Sabart authored
The tmscsim.txt doc file was removed in c121107d. Fixes: c121107d ("scsi: documentation: Obsolete documentation references") Signed-off-by:
Otto Sabart <ottosabart@seberm.com> Signed-off-by:
-
