There are no callers of both __opal_async_get_token() and
__opal_async_release_token().

This patch also removes the possibility of "emergency through
synchronous call to __opal_async_get_token()" as such it makes more
sense to initialise opal_sync_sem for the maximum number of async
tokens.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Because the MTD core might split up a read() or write() from userspace
into several calls to the driver, we may fail to get a token but already
have done some work, best to return -EINTR back to userspace and have
them decide what to do.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powernv_flash_probe() has pointless goto statements which jump to the
end of the function to simply return a variable. Rather than checking
for error and going to the label, just return the error as soon as it is
detected.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

While this driver expects to interact asynchronously, OPAL is well
within its rights to return OPAL_SUCCESS to indicate that the operation
completed without the need for a callback. We shouldn't treat
OPAL_SUCCESS as an error rather we should wrap up and return promptly to
the caller.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

BUG_ON() should be reserved in situations where we can not longer
guarantee the integrity of the system. In the case where
powernv_flash_async_op() receives an impossible op, we can still
guarantee the integrity of the system.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.

This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.

Fixes: 8d724823 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This interface is inefficient and deprecated because of the y2038
overflow.

ktime_get_seconds() is an appropriate replacement here, since it
has sufficient granularity but is more efficient and uses monotonic
time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Presently the PSL9 specific cxl_stop_trace_psl9() only stops the RX0
traces on the CXL adapter when a PSL error irq is triggered. The patch
updates the function to stop all the traces arrays and move them to
the FIN state. The implementation issues the mmio to TRACECFG register
to stop the trace array iff it already not in FIN state. This prevents
the issue of trace data being reset in case of multiple stop mmio
issued for a single trace array.

Also the patch does some refactoring of existing cxl_stop_trace_psl9()
and cxl_stop_trace_psl8() functions by moving them to 'pci.c' from
'debugfs.c' file and marking them as static.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Take advantage of stack_depth tracking, originally introduced for
x64, in powerpc JIT as well. Round up allocated stack by 16 bytes
to make sure it stays aligned for functions called from JITed bpf
program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently when we take a TM Bad Thing program check exception, we
search the bug table to see if the program check was generated by a
WARN/WARN_ON etc.

That makes no sense, the WARN macros use trap instructions, which
should never generate a TM Bad Thing exception. If they ever did that
would be a bug and we should oops.

We do have some hand-coded bugs in tm.S, using EMIT_BUG_ENTRY, but
those are all BUGs not WARNs, and they all use trap instructions
anyway. Almost certainly this check was incorrectly copied from the
REASON_TRAP handling in the same function.

Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-By: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently if the hardware supports the radix MMU we will use
it, *unless* "disable_radix" is passed on the kernel command line.

However some users would like the reverse semantics. ie. The kernel
uses the hash MMU by default, unless radix is explicitly requested on
the command line.

So add a CONFIG option to choose whether we use radix by default or
not, and expand the disable_radix command line option to allow
"disable_radix=no" which *enables* radix.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU
on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU
found in "server" processors, from IBM mainly.

Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's
annoying to have two symbols that always have the same value, it's not
quite annoying enough to bother removing one.

However with the arrival of Power9, we now have the situation where
CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the
Radix MMU - *not* the "standard" MMU. So it is now actively confusing
to use it, because it implies that code is disabled or inactive when
the Radix MMU is in use, however that is not necessarily true.

So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor
formatting updates of some of the affected lines.

This will be a pain for backports, but c'est la vie.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The last user of CPU_FTR_ICSWX was removed in commit
6ff4d3e9 ("powerpc: Remove old unused icswx based coprocessor
support"), so free the bit up for future use.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make the printks look a bit nicer by adding a prefix.

Radix config now do
 radix-mmu: Page sizes from device-tree:
 radix-mmu: Page size shift = 12 AP=0x0
 radix-mmu: Page size shift = 16 AP=0x5
 radix-mmu: Page size shift = 21 AP=0x1
 radix-mmu: Page size shift = 30 AP=0x2

This patch update hash config to do similar dmesg output. With the patch we have

 hash-mmu: Page sizes from device-tree:
 hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
 hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7
 hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56
 hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1
 hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8
 hash-mmu: base_shift=20: shift=20, sllp=0x0111, avpnm=0x00000000, tlbiel=0, penc=2
 hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
 hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In order to make generic IOV code work, the physical function IOV BAR
should start from offset of the first VF. Since M64 segments share
PE number space across PHB, and some PEs may be in use at the time
when IOV is enabled, the existing code shifts the IOV BAR to the index
of the first PE/VF. This creates a hole in IOMEM space which can be
potentially taken by some other device.

This reserves a temporary hole on a parent and releases it when IOV is
disabled; the temporary resources are stored in pci_dn to avoid
kmalloc/free.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When a vdevice is DLPAR removed from the system the vio subsystem
doesn't bother unmapping the virq from the irq_domain. As a result we
have a virq mapped to a hardware irq that is no longer valid for the
irq_domain. A side effect is that we are left with /proc/irq/<irq#>
affinity entries, and attempts to modify the smp_affinity of the irq
will fail.

In the following observed example the kernel log is spammed by
ics_rtas_set_affinity errors after the removal of a VSCSI adapter.
This is a result of irqbalance trying to adjust the affinity every 10
seconds.

  rpadlpar_io: slot U8408.E8E.10A7ACV-V5-C25 removed
  ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3
  ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3

This patch fixes the issue by calling irq_dispose_mapping() on the
virq of the viodev on unregister.

Fixes: f2ab6219 ("powerpc/pseries: Add PFO support to the VIO bus")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

According to the architecture, the process table entry cache must be
flushed with tlbie RIC=2.

Currently the process table entry is set to invalid right before the
PID is returned to the allocator, with no invalidation. This works on
existing implementations that are known to not cache the process table
entry for any except the current PIDR.

It is architecturally correct and cleaner to invalidate with RIC=2
after clearing the process table entry and before the PID is returned
to the allocator. This can be done in arch_exit_mmap that runs before
the final flush, and to ensure the final flush (fullmm) is always a
RIC=2 variant.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Preempt should be consistently disabled for mm_is_thread_local tests,
so bring the rest of these under preempt_disable().

Preempt does not need to be disabled for the mm->context.id tests,
which allows simplification and removal of gotos.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Close the recoverability gap for OPAL calls by using FIXUP_ENDIAN_HV
in the return path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add an HV variant of FIXUP_ENDIAN which uses HSRR[01] and does not
clear MSR[RI], which improves recoverability.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When returning from an exception to a soft-enabled context, pending
IRQs are replayed but IRQ tracing is not reset, so a number of them
can get chained together into the same IRQ-disabled trace.

Fix this by having __check_irq_replay re-set IRQ trace. This is
conceptually where we respond to the next interrupt, so it fits the
semantics of the IRQ tracer.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the host takes a system reset interrupt while a guest is running,
the CPU must exit the guest before processing the host exception
handler.

After this patch, taking a sysrq+x with a CPU running in a guest
gives a trace like this:

   cpu 0x27: Vector: 100 (System Reset) at [c000000fdf5776f0]
       pc: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       lr: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       sp: c000000fdf577850
      msr: 9000000002803033
     current = 0xc000000fdf4b1e00
     paca    = 0xc00000000fd4d680	 softe: 3	 irq_happened: 0x01
       pid   = 6608, comm = qemu-system-ppc
   Linux version 4.14.0-rc7-01489-g47e1893a404a-dirty #26 SMP
   [c000000fdf577a00] c008000010159dd4 kvmppc_vcpu_run_hv+0x3dc/0x12d0 [kvm_hv]
   [c000000fdf577b30] c0080000100a537c kvmppc_vcpu_run+0x44/0x60 [kvm]
   [c000000fdf577b60] c0080000100a1ae0 kvm_arch_vcpu_ioctl_run+0x118/0x310 [kvm]
   [c000000fdf577c00] c008000010093e98 kvm_vcpu_ioctl+0x530/0x7c0 [kvm]
   [c000000fdf577d50] c000000000357bf8 do_vfs_ioctl+0xd8/0x8c0
   [c000000fdf577df0] c000000000358448 SyS_ioctl+0x68/0x100
   [c000000fdf577e30] c00000000000b220 system_call+0x58/0x6c
   --- Exception: c01 (System Call) at 00007fff76868df0
   SP (7fff7069baf0) is in userspace

Fixes: e36d0a2e ("powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Although kfree(NULL) is legal, it's a bit lazy to rely on that to
implement the error handling. So do it the normal Linux way using
labels for each failure path.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Squash a few patches and rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fix a word in these descriptions.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The local variable "rc" will eventually be set only to an error code.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Back in 2008 we added support for "fast little-endian switch" in the
syscall path. This added a special case syscall number 0x1ebe, which
is caught very early in the system call exception and switches endian
with as little overhead as possible. See commit 745a14cc
("[POWERPC] Add fast little-endian switch system call") for full
details.

Although it is fast, it's also completely non standard. The "syscall
number" is out of the range of normal syscalls, it can't be traced or
audited, and it's a bit of a wart. To the best of our knowledge it was
only used by one program, now long since discontinued.

So in an effort to shake out any current users, put it behind a config
option, and make it default n. If anyone *is* using it they can
quickly reinstate it with a rebuild, and we can flip it to default y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

So we can #ifdef them in the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When dumping the paca in xmon we currently show kstack. Although it's
not hard it's a bit fiddly to work out what the bounds of the kernel
stack should be based on the kstack value.

To make life easier and "kstack_base" which is the base (lowest
address) of the kernel stack, eg:

 kstack               = 0xc0000000f1a7be30      (0x258)
 kstack_base          = 0xc0000000f1a78000
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

i2c-dev provides an interface for userspace programs to interact with I2C
devices, and is very helpful for I2C-related debugging.

Enable it in pseries_defconfig and powernv_defconfig. It's already enabled
in many other powerpc defconfigs.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We call these functions with non-NULL mm or vma. Hence we can skip the
NULL check in these functions. We also remove now unused function
__local_flush_hugetlb_page().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Drop the checks with is_vm_hugetlb_page() as noticed by Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently xmon could call XIVE functions from OPAL even if the XIVE is
disabled or does not exist in the system, as in POWER8 machines. This
causes the following exception:

 1:mon> dx
 cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450]
     pc: c00000000009cfa4: opal_xive_dump+0x50/0x68
     lr: c0000000000997b8: opal_return+0x0/0x50

This patch simply checks if XIVE is enabled before calling XIVE
functions.

Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Access to PSL/XSL_DEBUG registers on the adapter provides easy access
to the debug facilities provided by PSL/XSL. So this patch adds two
new files (debug, xsl-debug) to the cxl-adapter specific debugfs
folder located at /sys/kernel/debugfs/cxl/card<n>, which will provide
direct r/w access to corrosponding debug registers in the adapter
config-space.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Unfortunately userspace can construct a sigcontext which enables
suspend. Thus userspace can force Linux into a path where trechkpt is
executed.

This patch blocks this from happening on POWER9 by sanity checking
sigcontexts passed in.

ptrace doesn't have this problem as only MSR SE and BE can be changed
via ptrace.

This patch also adds a number of WARN_ON()s in case we ever enter
suspend when we shouldn't. This should not happen, but if it does the
symptoms are soft lockup warnings which are not obviously TM related,
so the WARN_ON()s should make it obvious what's happening.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some Power9 revisions can run in a mode where TM operates without
suspended state. If we find ourself on a CPU that might be in this
mode, we query OPAL to check, and if so we reenable TM in CPU
features, and enable a new user feature to signal to userspace that we
are in this mode.

We do not enable the "normal" user feature, PPC_FEATURE2_HTM, but we
do enable PPC_FEATURE2_HTM_NOSC because that indicates to userspace
that the kernel will abort transactions on syscall entry, which is
true regardless of the suspend mode.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some CPUs can operate in a mode where TM (Transactional Memory) is
enabled but the suspended state of TM is disabled. In this mode
tsuspend does not enter suspended state, instead the transaction is
aborted. Similarly any other event that would lead to suspended state
instead aborts the transaction.

There is also an ABI change, in that in this mode processes are not
allowed to sigreturn with an MSR that would lead to suspended state,
Linux will instead return an error to the sigreturn syscall.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently the kernel relies on firmware to inform it whether or not the
CPU supports HTM and as long as the kernel was built with
CONFIG_PPC_TRANSACTIONAL_MEM=y then it will allow userspace to make
use of the facility.

There may be situations where it would be advantageous for the kernel
to not allow userspace to use HTM, currently the only way to achieve
this is to recompile the kernel with CONFIG_PPC_TRANSACTIONAL_MEM=n.

This patch adds a simple commandline option so that HTM can be
disabled at boot time.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Simplify to a bool, move to prom.c, put doco in the right place.
 Always disable, regardless of initial state, to avoid user confusion.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>