- 28 Feb, 2014 40 commits
-
-
Vladimir Kondratiev authored
Print '_' for the 'idle' descriptors - this makes vring representation more visible. Also, for the Tx side, differentiate descriptors having associated skb's - print ones with skb as 'H' and without as 'h'. Good to represent scattered frames. Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
Expand debug capabilities to query all Tx/Rx descriptors. Usefull to analyse various hardware/software stall situations. Printed is whole descriptor content and the frame itself. Signed-off-by:
-
Vladimir Kondratiev authored
Implement management frame passing. In order to receive frame on the other side, remain_on_channel() should be implemented as well Signed-off-by:
-
Hante Meuleman authored
The intstatus in sdio code can be updated from different threads. To protect intstatus access, atomic functions are used. The loop was replaced using atomic_set_mask(). Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
-
Oleksij Rempel authored
... to remove duplicate code Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Oleksij Rempel authored
sleepduration is always = intval. Signed-off-by:
-
Oleksij Rempel authored
this variable never changed. Signed-off-by:
-
Paul Stewart authored
Some stations reset the sequence number for traffic-ids (TIDs) as they initiate a block-ACK session. In order to detect such behavior, mwifiex must note the starting sequence number given during the ADDBA request. If the first received sequence number after the ADDBA falls outside the receive window for this TID but after the the ADDBA starting sequence number, we can assume that this AP has reset its sequence number during the ADDBA. In this case we must adjust the input window backward to incorporate this received sequence number instead of ignoring it. Otherwise, we could fail to successfully retrieve an arbitrarily large number of downstream frames at the beginning of the block-ACK session. Signed-off-by:
Paul Stewart <pstew@chromium.org> Acked-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Hante Meuleman authored
In time some of the code got redundant, without being noticed. This patch does not change any functionality, just removes redundant code. Reviewed-by:
-
Hante Meuleman authored
Immediate sleep support is an aggressive power saving option that has not been enabled in brcmfmac and is removed to simplify code. Reviewed-by:
-
Hante Meuleman authored
SDIO dpc scheduling is done (repeated) when counter is set. This counter gets decreased when dpc is finished. It is more efficient to set counter to 0 before the dpc is actullay run. This will minimize the frequency with which dpc is executed. Reviewed-by:
-
Hante Meuleman authored
First clean up fw signalling, before cleaning up the bus and proto layer. Old order can cause oops in some circumstances. Reviewed-by:
-
Hante Meuleman authored
Reviewed-by:
-
Arend van Spriel authored
The local variable data_len is assigned but never used so get rid of it. Reviewed-by:
-
Arend van Spriel authored
The SDIO driver has a 16-bit field defined in the skbuff control buffer. However, it is accessed as a u32 overwriting other control info. Another issue is that the field is not initialized for networking packets, but the control buffer content is unspecified as other networking layers can use it. Reviewed-by:
-
Hante Meuleman authored
Internal firmware roaming is enabled by default. This patch makes it possible to disable internal firmware roaming by specifying roamoff=1 as module param. Reviewed-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
and rename it to ath9k_cmn_setup_ht_cap Signed-off-by:
-
Oleksij Rempel authored
and ath_common sbands. Signed-off-by:
-
Oleksij Rempel authored
and rename it to ath9k_cmn_init_channels_rates. sbands are move to ath_common as well. Signed-off-by:
-
Yogesh Ashok Powar authored
Survey stats such as channel busy time, rx busy time and noise are collected when sw_scan starts for every switched new channel. This happens till sw_scan stops. All the collected stats are shared up when get_survey() is called. This implements support for ACS feature from Hostapd. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
Yogesh Ashok Powar authored
Implement sw_scan start and stop callbacks. Reset BBP registers for channel, RX busy and average noise stats which clear on read. Signed-off-by:
-
Yogesh Ashok Powar authored
Adding AP firmware command to access BBP regs. This will be used for retrieving different counters CCA/RX needed for ACS Signed-off-by:
-
Zhao, Gang authored
Function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} have been replaced with ieee80211_{channel_to_frequency, frequency_to_channel}. There should be no users of the two functions now. So remove them. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by:Zhao, Gang <gamerh2o@gmail.com> Signed-off-by:
-
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. File <net/cfg80211.h> has already been included. It's safe to use IEEE80211_BAND_2GHZ here. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Signed-off-by: -
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. Function ieee80211_frequency_to_channel() will return 0 if frequency is not correctly provided, so no need to set channel to 0 explicitly. Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ. Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can replace <linux/ieee80211.h> with <net/cfg80211.h>. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Signed-off-by: -
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. File <net/cfg80211.h> has already been included. It's safe to use IEEE80211_BAND_2GHZ here. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: -
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ. Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can replace <linux/ieee80211.h> with <net/cfg80211.h>. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: -
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ. Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can replace <linux/ieee80211.h> with <net/cfg80211.h>. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Cc: Simon Kelley <simon@thekelleys.org.uk> Signed-off-by: -
Zhao, Gang authored
Replace ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} with more generic ieee80211_{channel_to_frequency, frequency_to_channel}. Include <net/cfg80211.h> for the defination of IEEE80211_BAND_2GHZ. Because <net/cfg80211.h> includes <linux/ieee80211.h>, so we can replace <linux/ieee80211.h> with <net/cfg80211.h>. This change is a preparation for the removal of function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}. Signed-off-by: -
andrea merello authored
Certain HW options (TX packet retry count, CW configuration and TX power configuration) can be specified in both the TX packet descriptor and also into HW "global" registers. The HW is thus configured to honour the global register or the TX descriptor field depending by the case. This patch adds few comments that hopefully clarify in which cases the driver uses one method and in which cases it uses the other. Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Signed-off-by:
-
andrea merello authored
During driver initialization, some skbs are preallocated for RX. Currenly if the allocation fails, the driver's allocation routine exits immediatly but it will return zero (success) anyway. In this way the driver will continue initialization with buggy pointers around. This patch makes the driver's allocation routine to return an error value and to print a complaint message when skb allocation fails. In this way its caller will not go further, avoinding the driver to successfully load, and preventing dereferencing buggy pointers. An hint is thus printed about why the driver failed. Signed-off-by:
-
andrea merello authored
During initialization a number of RX skbs are allocated and mapped for DMA. Currently if pci_map_single() fails, it will result in passing to the HW a wrong DMA address (to write to!). This patch adds check for this condition and eventually causes the driver not to initialize, avoiding at least dangerous DMAs. Signed-off-by:
-
andrea merello authored
Currently the driver uses pci_iomap() but iounmap() is called in the error path Change to use pci_iounmap() instead. Reported-by:
Huqiu Liu <liuhq11@mails.tsinghua.edu.cn> Signed-off-by:
-
andrea merello authored
Currently the contention window enable/disable HW flag is not touched by the driver. This patch explicitly set it to the correct value to make sure contention window is enabled (AFAIK contention window must be enabled in most (if not all) cases. Signed-off-by:
-
Sebastian Reichel authored
Add device tree binding documentation for Texas Instrument's wl1251 wireless lan chip. For now only the SPI binding is documented. Signed-off-by:
Sebastian Reichel <sre@debian.org> Signed-off-by:
-
Sebastian Reichel authored
Add device tree support for the spi variant of wl1251. Signed-off-by:
-
