Simple table that can be marked const.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After IP route cache removal, rt_cache_rebuild_count is no longer
used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c6cffba4 (ipv4: Fix input route performance regression.)
added various fatal races with dst refcounts.

crashes happen on tcp workloads if routes are added/deleted at the same
time.

The dst_free() calls from free_fib_info_rcu() are clearly racy.

We need instead regular dst refcounting (dst_release()) and make
sure dst_release() is aware of RCU grace periods :

Add DST_RCU_FREE flag so that dst_release() respects an RCU grace period
before dst destruction for cached dst

Introduce a new inet_sk_rx_dst_set() helper, using atomic_inc_not_zero()
to make sure we dont increase a zero refcount (On a dst currently
waiting an rcu grace period before destruction)

rt_cache_route() must take a reference on the new cached route, and
release it if was not able to install it.

With this patch, my machines survive various benchmarks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

early_demux() handlers should be called in RCU context, and as we
use skb_dst_set_noref(skb, dst), caller must not exit from RCU context
before dst use (skb_dst(skb)) or release (skb_drop(dst))

Therefore, rcu_read_lock()/rcu_read_unlock() pairs around
->early_demux() are confusing and not needed :

Protocol handlers are already in an RCU read lock section.
(__netif_receive_skb() does the rcu_read_lock() )
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The tun module leaks up to 36 bytes of memory by not fully initializing
a structure located on the stack that gets copied to user memory by the
TUNGETIFF and SIOCGIFHWADDR ioctl()s.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spinlock should be taken before checking for tp->hw_stats.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After Power-on-reset, the 5719's TX DMA length registers may contain
uninitialized values and cause TX DMA to stall.  Check for invalid
values and set a register bit to flush the TX channels.  The bit
needs to be turned off after the DMA channels have been flushed.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The workaround was mis-applied to all 5719 and 5720 chips.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

to prevent PHY access conflict with APE firmware.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When userspace use RTM_GETROUTE to dump route table, with an already
expired route entry, we always got an 'expires' value(2147157)
calculated base on INT_MAX.

The reason of this problem is in the following satement:
	rt->dst.expires - jiffies < INT_MAX
gcc promoted the type of both sides of '<' to unsigned long, thus
a small negative value would be considered greater than INT_MAX.

With the help of Eric Dumazet, do the out of bound checks in
rtnl_put_cacheinfo(), _after_ conversion to clock_t.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test for the fillempty condition was wrong in one place.
Changed the variable to the right boolean type.
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

the driver sees wether the dev_seeq pointer is having a error that can be
read by using the PTR_ERR, and returns it at error case, other wise 0 at
success case.

the PTR_RET does the same thing, and use PTR_RET instead of redoing the
code of PTR_RET
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

casting the void pointer is redundant (Documentation/CodingStyle)
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The first parameter struct trie *t is not used anymore.
Remove it.
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

It should print size of struct rt_trie_node * allocated instead of size
of struct rt_trie_node.
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fills the net_device vlan_features with the proper hardware features,
thus, improving the vlan interface performance.

With the patch applied, I can see around 148% improvement on a TCP_STREAM test,
from 3.5 Gb/s to 8.7 Gb/s. On TCP_RR, I see a 11% improvement, from 18k
to 20. The CPU utilization is almost the same on both cases, from the comparison
above.
Signed-off-by: Breno Leitao <brenohl@br.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Several bug fixes, some to new features appearing in this merge
  window, some that have been around for a while.

  I have a short list of known problems that need to be sorted out, but
  all of them can be solved easily during the run up to 3.6-final.

  I'll be offline until Sunday afternoon, but nothing need hold up
  3.6-rc1 and the close of the merge window, networking wise, at this
  point.

  1) Fix interface check in ipv4 TCP early demux, from Eric Dumazet.

  2) Fix a long standing bug in TCP DMA to userspace offload that can
     hang applications using MSG_TRUNC, from Jiri Kosina.

  3) Don't allow TCP_USER_TIMEOUT to be negative, from Hangbin Liu.

  4) Don't use GFP_KERNEL under spinlock in kaweth driver, from Dan
     Carpenter"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tcp: perform DMA to userspace only if there is a task waiting for it
  Revert "openvswitch: potential NULL deref in sample()"
  ipv4: fix TCP early demux
  net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling
  USB: kaweth.c: use GFP_ATOMIC under spin_lock
  tcp: Add TCP_USER_TIMEOUT negative value check
  bcma: add missing iounmap on error path
  bcma: fix regression in interrupt assignment on mips
  mac80211_hwsim: fix possible race condition in usage of info->control.sta & control.vif

Pull ext4 updates from Ted Ts'o:
 "The usual collection of bug fixes and optimizations.  Perhaps of
  greatest note is a speed up for parallel, non-allocating DIO writes,
  since we no longer take the i_mutex lock in that case.

  For bug fixes, we fix an incorrect overhead calculation which caused
  slightly incorrect results for df(1) and statfs(2).  We also fixed
  bugs in the metadata checksum feature."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: undo ext4_calc_metadata_amount if we fail to claim space
  ext4: don't let i_reserved_meta_blocks go negative
  ext4: fix hole punch failure when depth is greater than 0
  ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
  ext4: weed out ext4_write_super
  ext4: remove unnecessary superblock dirtying
  ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super()
  ext4: remove useless marking of superblock dirty
  ext4: fix ext4 mismerge back in January
  ext4: remove dynamic array size in ext4_chksum()
  ext4: remove unused variable in ext4_update_super()
  ext4: make quota as first class supported feature
  ext4: don't take the i_mutex lock when doing DIO overwrites
  ext4: add a new nolock flag in ext4_map_blocks
  ext4: split ext4_file_write into buffered IO and direct IO
  ext4: remove an unused statement in ext4_mb_get_buddy_page_lock()
  ext4: fix out-of-date comments in extents.c
  ext4: use s_csum_seed instead of i_csum_seed for xattr block
  ext4: use proper csum calculation in ext4_rename
  ext4: fix overhead calculation used by ext4_statfs()
  ...

Pull ARM updates from Russell King:
 "First ARM push of this merge window, post me coming back from holiday.
  This is what has been in linux-next for the last few weeks.  Not much
  to say which isn't described by the commit summaries."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  ARM: 7463/1: topology: Update cpu_power according to DT information
  ARM: 7462/1: topology: factorize the update of sibling masks
  ARM: 7461/1: topology: Add arch_scale_freq_power function
  ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
  ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
  ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
  ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
  ARM: 7452/1: delay: allow timer-based delay implementation to be selected
  ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
  ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
  ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
  ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
  ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
  ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
  ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
  ARM: 7444/1: kernel: add arch-timer C3STOP feature
  ARM: 7460/1: remove asm/locks.h
  ARM: 7439/1: head.S: simplify initial page table mapping
  ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
  ARM: 7436/1: Do not map the vectors page as write-through on UP systems
  ...

John W. Linville says:

====================
These fixes are intended for the 3.6 stream.

Hauke Mehrtens provides a pair of bcma fixes, one to fix a build
regression on mips and another to correct a pair of missing iounmap
calls.

Thomas Huehn offers a mac80211_hwsim fix to avoid a possible
use-after-free bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in 2006, commit 1a2449a8 ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.

The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.

This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.

If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.

This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.

This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 5b3e7e6c.

The problem that the original commit was attempting to fix can
never happen in practice because validation is done one a per-flow
basis rather than a per-packet basis.  Adding additional checks at
runtime is unnecessary and inconsistent with the rest of the code.

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 92101b3b (ipv4: Prepare for change of rt->rt_iif encoding.)
invalidated TCP early demux, because rx_dst_ifindex is not properly
initialized and checked.

Also remove the use of inet_iif(skb) in favor or skb->skb_iif
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI
flags are handled specially. Function dev_change_flags sets IFF_PROMISC and
IFF_ALLMULTI bits in dev->gflags according to the passed value but
do_setlink passes a result of rtnl_dev_combine_flags which takes those bits
from dev->flags.

This can be easily trigerred by doing:

tcpdump -i eth0 &
ip l s up eth0

ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with
IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set
IFF_PROMISC in gflags.
Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The problem is that we call this with a spin lock held.  The call tree
is:
	kaweth_start_xmit() holds kaweth->device_lock.
	-> kaweth_async_set_rx_mode()
	   -> kaweth_control()
	      -> kaweth_internal_control_msg()

The kaweth_internal_control_msg() function is only called from
kaweth_control() which used GFP_ATOMIC for its allocations.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But
patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative
values. If a user assign -1 to it, the socket will set successfully and wait
for 4294967295 miliseconds. This patch add a negative value check to avoid
this issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull TTY/Serial patches from Greg Kroah-Hartman:
 "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
  serial drivers.  They were cherry-picked from the tty-next branch of
  the tty git tree, as they are small and "obvious" fixes.  The larger
  changes, as mentioned before, will be saved for the 3.7-rc1 merge
  window.

  All of these changes have been in the linux-next releases for quite a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Fix parity setting issue
  pch_uart: Fix rx error interrupt setting issue
  pch_uart: Fix missing break for 16 byte fifo
  tty ldisc: Close/Reopen race prevention should check the proper flag
  pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
  vt: fix race in vt_waitactive()
  serial/of-serial: Add LPC3220 standard UART compatible string
  serial/8250: Add LPC3220 standard UART type
  serial_core: Update buffer overrun statistics.
  serial: samsung: Fixed wrong comparison for baudclk_rate

Pull final kmap_atomic cleanups from Cong Wang:
 "This should be the final round of cleanup, as the definitions of enum
  km_type finally get removed from the whole tree.  The patches have
  been in linux-next for a long time."

* 'kmap_atomic' of git://github.com/congwang/linux:
  pipe: remove KM_USER0 from comments
  vmalloc: remove KM_USER0 from comments
  feature-removal-schedule.txt: remove kmap_atomic(page, km_type)
  tile: remove km_type definitions
  um: remove km_type definitions
  asm-generic: remove km_type definitions
  avr32: remove km_type definitions
  frv: remove km_type definitions
  powerpc: remove km_type definitions
  arm: remove km_type definitions
  highmem: remove the deprecated form of kmap_atomic
  tile: remove usage of enum km_type
  frv: remove the second parameter of kmap_atomic_primary()
  jbd2: remove the second argument of kmap_atomic

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Here's a handful of powerpc patches, a couple of regression fixes for
  problems introduced in the main batch in this merge window, a couple
  of defconfig updates, and some trivials.

  The radeonfb one is something that was long standing in SLES which I
  forgot to pickup earlier."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ftrace: Trace function graph entry before updating index
  radeonfb: Add quirk for the graphics adapter in some JSxx
  powerpc: Lack of firmware flash support is not an error
  powerpc: Enable pseries hardware RNG and crypto modules
  powerpc: Update g5_defconfig
  powerpc/kvm/bookehv: Fix build regression
  powerpc: Set stack limit properly in crit_transfer_to_handler

Merge tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull cpumask changes from Rusty Russell:
 "Trivial comment changes to cpumask code.  I guess it's getting boring."

Boring is good.

* tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: cpulist_parse() comments correction
  init: add comments to keep initcall-names in sync with initcall levels
  cpumask: add a few comments of cpumask functions

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Pull ARM SoC fixes from Olof Johansson:
 "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and
  a short series of fixes for marvell platforms that didn't make it in
  before 3.5."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: fix compile error caused by prom_update_property change
  ARM: dt: tegra trimslice: enable USB2 port
  ARM: dt: tegra trimslice: add vbus-gpio property
  ARM: vt8500: Add maintainer for VT8500 architecture
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Orion: fix driver probe error handling with respect to clk
  ARM: Dove: Fixup ge00 initialisation
  ARM: Kirkwood: Fix PHY disable clk problems
  ARM: Kirkwood: Ensure runit clock always ticks.
  ARM: versatile: Don't use platform clock for Integrator & VE
  ARM: tegra: harmony: add regulator supply name and its input supply

Pull LED subsystem update from Bryan Wu.

* 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits)
  leds-lp8788: forgotten unlock at lp8788_led_work
  LEDS: propagate error codes in blinkm_detect()
  LEDS: memory leak in blinkm_led_common_set()
  leds: add new lp8788 led driver
  LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
  leds: max8997: Simplify max8997_led_set_mode implementation
  leds/leds-s3c24xx: use devm_gpio_request
  leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert DAC124S085 LED driver to devm_kzalloc()
  leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert TCA6507 LED driver to devm_kzalloc()
  leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9532 LED driver to devm_kzalloc()
  leds: convert LT3593 LED driver to devm_kzalloc()
  leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path
  leds: convert PCA9633 LED driver to devm_kzalloc()
  ...

As Colin Cross ported my x86 change to ARM, he also pointed out that
powerpc is also behind in this fix.

The commit 722b3c74 "ftrace/graph: Trace function entry before
updating index" fixes an issue with function graph tracing for x86,
where if the called entry function decides not to trace interrupts, it
can fail the check if an interrupt comes in just after the
curr_ret_stack is updated.

The solution is to call the entry function first, then update the
curr_ret_stack if the entry function wants to be traced.

Cc: Colin Cross <ccross@android.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

These devices are set to 640x480 by firmware, switch them to 800x600@60
so that the graphical installer can run on remote console.

Reported by IBM during SLES10 SP2 beta testing:

https://bugzilla.novell.com/show_bug.cgi?id=461002
LTC50817
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Reduce the severity of the warning given when firmware flash is
not supported. Not all platforms have it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Enable the hardware RNG and crypto modules. I verified they both
autoload via the VIO subsystem, so there is no need to build them in.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>