Skip to content

L
linux
Switch branch/tag
  1. 16 Jan, 2015 16 commits
  3. 15 Jan, 2015 11 commits
    • Geert Uytterhoeven's avatar
      sh_eth: Fix addition of .trscer_err_mask to wrong SoC data · 01fbd3f5
      Geert Uytterhoeven authored 
      commit b284fbe3 ("sh_eth: Fix access to TRSCER register") wanted
to add a .trscer_err_mask value to the R-Car Gen2 family-specific data
structure (r8a779x_data), but it was accidentally added to the
SH7724-specific data structure (sh7724_data).

Presumably this happened due to a patch conflict with commit
d407bc02 ("sh-eth: Set fdr_value of R-Car SoCs"), which added
another field at the same position.

Move the field setting to fix this.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Fixes: b284fbe3 ("sh_eth: Fix access to TRSCER register")
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01fbd3f5
    • Mugunthan V N's avatar
      drivers: net: cpsw: fix cpsw hung with add vlan using vconfig · 9f6bd8fa
      Mugunthan V N authored 
      while adding vlan in dual EMAC mode, only specific ports should be
subscribed for the vlan, else it will lead to switching mode and
if both ports connected to same switch cpsw will hung as it creates
a network loop. Fixing this by adding only specific ports in case
of dual EMAC.
Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f6bd8fa
    • Ahmed S. Darwish's avatar
      can: kvaser_usb: Don't dereference skb after a netif_rx() · a58518cc
      Ahmed S. Darwish authored 
      We should not touch the packet after a netif_rx: it might
get freed behind our back.
Suggested-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarAhmed S. Darwish <ahmed.darwish@valeo.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      a58518cc
    • Ahmed S. Darwish's avatar
      can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels · 5e7e6e0c
      Ahmed S. Darwish authored 
      Recent Leaf firmware versions (>= 3.1.557) do not allow to send
commands for non-existing channels.  If a command is sent for a
non-existing channel, the firmware crashes.
Reported-by: default avatarChristopher Storah <Christopher.Storah@invetech.com.au>
Signed-off-by: default avatarOlivier Sobrie <olivier@sobrie.be>
Signed-off-by: default avatarAhmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      5e7e6e0c
    • Ahmed S. Darwish's avatar
      can: kvaser_usb: Reset all URB tx contexts upon channel close · 889b77f7
      Ahmed S. Darwish authored 
      Flooding the Kvaser CAN to USB dongle with multiple reads and
writes in very high frequency (*), closing the CAN channel while
all the transmissions are on (#), opening the device again (@),
then sending a small number of packets would make the driver
enter an almost infinite loop of:

[....]
[15959.853988] kvaser_usb 4-3:1.0 can0: cannot find free context
[15959.853990] kvaser_usb 4-3:1.0 can0: cannot find free context
[15959.853991] kvaser_usb 4-3:1.0 can0: cannot find free context
[15959.853993] kvaser_usb 4-3:1.0 can0: cannot find free context
[15959.853994] kvaser_usb 4-3:1.0 can0: cannot find free context
[15959.853995] kvaser_usb 4-3:1.0 can0: cannot find free context
[....]

_dragging the whole system down_ in the process due to the
excessive logging output.

Initially, this has caused random panics in the kernel due to a
buggy error recovery path.  That got fixed in an earlier commit.(%)
This patch aims at solving the root cause. -->

16 tx URBs and contexts are allocated per CAN channel per USB
device. Such URBs are protected by:

a) A simple atomic counter, up to a value of MAX_TX_URBS (16)
b) A flag in each URB context, stating if it's free
c) The fact that ndo_start_xmit calls are themselves protected
   by the networking layers higher above

After grabbing one of the tx URBs, if the driver noticed that all
of them are now taken, it stops the netif transmission queue.
Such queue is worken up again only if an acknowedgment was received
from the firmware on one of our earlier-sent frames.

Meanwhile, upon channel close (#), the driver sends a CMD_STOP_CHIP
to the firmware, effectively closing all further communication.  In
the high traffic case, the atomic counter remains at MAX_TX_URBS,
and all the URB contexts remain marked as active.  While opening
the channel again (@), it cannot send any further frames since no
more free tx URB contexts are available.

Reset all tx URB contexts upon CAN channel close.

(*) 50 parallel instances of `cangen0 -g 0 -ix`
(#) `ifconfig can0 down`
(@) `ifconfig can0 up`
(%) "can: kvaser_usb: Don't free packets when tight on URBs"
Signed-off-by: default avatarAhmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      889b77f7
    • Ahmed S. Darwish's avatar
      can: kvaser_usb: Don't free packets when tight on URBs · b442723f
      Ahmed S. Darwish authored 
      Flooding the Kvaser CAN to USB dongle with multiple reads and
writes in high frequency caused seemingly-random panics in the
kernel.

On further inspection, it seems the driver erroneously freed the
to-be-transmitted packet upon getting tight on URBs and returning
NETDEV_TX_BUSY, leading to invalid memory writes and double frees
at a later point in time.

Note:

Finding no more URBs/transmit-contexts and returning NETDEV_TX_BUSY
is a driver bug in and out of itself: it means that our start/stop
queue flow control is broken.

This patch only fixes the (buggy) error handling code; the root
cause shall be fixed in a later commit.
Acked-by: default avatarOlivier Sobrie <olivier@sobrie.be>
Signed-off-by: default avatarAhmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      b442723f
    • Roger Quadros's avatar
      can: c_can: use regmap_update_bits() to modify RAMINIT register · 47e3485a
      Roger Quadros authored 
      use of regmap_read() and regmap_write() in c_can_hw_raminit_syscon()
is not safe as the RAMINIT register can be shared between different drivers
at least for TI SoCs.

To make the modification atomic we switch to using regmap_update_bits().

regmap_update_bits() skips writing to the register if it's read content is the
same as what is going to be written. This causes an issue for us when we
need to clear the DONE bit with the initial condition START:0, DONE:1 as
DONE bit must be written with 1 to clear it.

So we defer the clearing of DONE bit to later when we set the START bit.
There we are sure that START bit is changed from 0 to 1 so the write of
1 to already set DONE bit will happen.
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      47e3485a
    • Oliver Hartkopp's avatar
      can: m_can: tag current CAN FD controllers as non-ISO · 6cfda7fb
      Oliver Hartkopp authored 
      During the CAN FD standardization process within the ISO it turned out that
the failure detection capability has to be improved.

The CAN in Automation organization (CiA) defined the already implemented CAN
FD controllers as 'non-ISO' and the upcoming improved CAN FD controllers as
'ISO' compliant. See at http://www.can-cia.com/index.php?id=1937

Finally there will be three types of CAN FD controllers in the future:

1. ISO compliant (fixed)
2. non-ISO compliant (fixed, like the M_CAN IP v3.0.1 in m_can.c)
3. ISO/non-ISO CAN FD controllers (switchable, like the PEAK USB FD)

So the current M_CAN driver for the M_CAN IP v3.0.1 has to expose its non-ISO
implementation by setting the CAN_CTRLMODE_FD_NON_ISO ctrlmode at startup.
As this bit cannot be switched at configuration time CAN_CTRLMODE_FD_NON_ISO
must not be set in ctrlmode_supported of the current M_CAN driver.
Signed-off-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      6cfda7fb
    • Oliver Hartkopp's avatar
      can: dev: fix crtlmode_supported check · 9b1087aa
      Oliver Hartkopp authored 
      When changing flags in the CAN drivers ctrlmode the provided new content has to
be checked whether the bits are allowed to be changed. The bits that are to be
changed are given as a bitfield in cm->mask. Therefore checking against
cm->flags is wrong as the content can hold any kind of values.

The iproute2 tool sets the bits in cm->mask and cm->flags depending on the
detected command line options. To be robust against bogus user space
applications additionally sanitize the provided flags with the provided mask.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      9b1087aa
    • Marc Kleine-Budde's avatar
      MAINTAINERS: update linux-can git repositories · 870482a4
      Marc Kleine-Budde authored 
      The linux-can upstream git repositories are now hosted on kernel.org, update
MAINTAINERS accordingly.
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      870482a4
    • Sriharsha Basavapatna's avatar
      be2net: Allow GRE to work concurrently while a VxLAN tunnel is configured · 16dde0d6
      Sriharsha Basavapatna authored 
      Other tunnels like GRE break while VxLAN offloads are enabled in Skyhawk-R. To
avoid this, we should restrict offload features on a per-packet basis in such
conditions.
Signed-off-by: default avatarSriharsha Basavapatna <sriharsha.basavapatna@emulex.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      16dde0d6
  5. 14 Jan, 2015 13 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7