- 03 May, 2018 1 commit
-
-
Daniel Vetter authored
We've disabled control nodes in commit 8a357d10 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 28 10:10:50 2016 +0200 drm: Nerf DRM_CONTROL nodes and there was only a minor uapi break that we've paper over with commit 6449b088 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Dec 9 14:56:56 2016 +0100 drm: Add fake controlD* symlinks for backwards compat Since then Keith has also added real control nodes with a proper&useable uapi in the form of drm leases. It's time to remove the control node leftovers. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-1-daniel.vetter@ffwll.ch
-
- 02 May, 2018 5 commits
-
-
Ville Syrjälä authored
An overeager sed has corrupted the drm_rect_rotation_inv() documentation. Fix it up. Looks like it wasn't entirely correct before the sed fail either. We were missing _rect_ from the function names, which also explains why the sed hit these by accident. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426141631.15798-1-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Linus Walleij authored
The Versatile Express has 8 MB of dedicated video RAM (VRAM) on the motherboard, which is what we should be using for the PL111 if available. On this platform, the memory backplane is constructed so that only this memory will work properly with the CLCD on the motherboard, using any other memory area just gives random snow on the display. The CA9 Versatile Express also has a PL111 instance on its core tile that can address all memory, and this does not have the restriction. The memory is assigned to the device using the memory-region device tree property and a "shared-dma-pool" reserved memory pool like this: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; vram: vram@48000000 { compatible = "shared-dma-pool"; reg = <0x48000000 0x00800000>; no-map; }; }; clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; (...) memory-region = <&vram>; }·; Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Reviewed-by:Eric Anholt <eric@anholt.net> Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-2-linus.walleij@linaro.org
-
Linus Walleij authored
The Versatile Express uses a special configuration controller deeply embedded in the system motherboard FPGA to multiplex the two to three (!) display controller instances out to the single SiI9022 bridge. Set up an extra file with the logic to probe to the FPGA mux register on the system controller bus, then parse the device tree to see if there is a CLCD or HDLCD instance on the core tile (also known as the daughterboard) by looking in the root of the device tree for compatible nodes. - If there is a HDLCD on the core tile, and there is a driver for it, we exit probe and deactivate the motherboard CLCD. We do not touch the DVI mux in this case, to make sure we don't break HDLCD. - If there is a CLCD on both the motherboard and the core tile (only the CA9 has this) the core tile CLCD takes precedence and get muxed to the DVI connector. - Only if there is no working graphics on the core tile, the motherboard CLCD is probed and muxed to the DVI connector. Core tile graphics should always take precedence as it can address all memory and is also faster, however the motherboard CLCD is good to have around for diagnostics and testing. It is possible to test the motherboard CLCD by setting the status = "disabled" property on the core tile CLCD or HDLCD. Scale down the Versatile Express to 16BPP so we can support a 1024x768 display despite the bus bandwidth restrictions on this platform. (The motherboard CLCD supports slightly lower resolution.) Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_ERROR error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Vetter authored
- Switch to inline member docs for dma_fence_ops. - Mild polish all around. - hyperlink all the things! v2: - Remove the various [in] annotations, they seem really uncommon in kerneldoc and look funny. v3: Linebreak the "Returns" part of the @fill_driver_data kerneldoc (Eric). Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-2-daniel.vetter@ffwll.ch
-
- 01 May, 2018 1 commit
-
-
Kristian H. Kristensen authored
Blending win0 with the background color doesn't seem to work correctly. We only get the background color, no matter the contents of the win0 framebuffer. However, blending pre-multiplied color with the default opaque black default background color is a no-op, so we can just disable blending to get the correct result. Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
- 30 Apr, 2018 8 commits
-
-
Stefan Schake authored
This doesn't require any additional functionality from the driver but is a prerequisite to userland calling the syncobj ioctls. Signed-off-by:
Stefan Schake <stschake@gmail.com> Signed-off-by:
-
Stefan Schake authored
Allow specifying a syncobj on render job submission where we store the fence for the job. This gives userland flexible access to the fence. v2: Use 0 as invalid syncobj to drop flag (Eric) Don't reintroduce the padding (Eric) Signed-off-by: -
Stefan Schake authored
Allow userland to specify a syncobj that is waited on before a render job starts processing. v2: Use 0 as invalid syncobj to drop flag (Eric) Drop extra newline (Eric) Signed-off-by: -
Eric Anholt authored
It turns out that I had just mistaken what type of write the register writes were supposed to be, using DCS instead of generic long writes. Switching to transactions instead of using the atmel as a bridge also seems to resolve the sparkling pixels problem I've had. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Thierry Reding <treding@nvidia.com>
-
Eric Anholt authored
It seems that trying to go from unlatched to unlatched will time out waiting for STOP, and we can just skip that. Signed-off-by:
-
Vaishali Thakkar authored
Sparse complains with following warning: drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol 'vc4_allocate_bin_bo' was not declared. Should it be static? Make vc4_allocate_bin static as it is not used outside of vc4_v3d.c. Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Eric Anholt authored
Some drivers leave these unimplemented, so don't make them have unimplemented stubs. Signed-off-by:
-
Tom Callaway authored
The PiTFT (ili9340) has a hardware reset circuit that resets only on power-on and not on each reboot through a gpio like the rpi-display does. As a result, we need to always apply the rotation value regardless of the display "on/off" state. Moved the rotation setting code below out_enable:. Signed-off-by:
Tom Callaway <tcallawa@redhat.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
- 27 Apr, 2018 9 commits
-
-
Ville Syrjälä authored
drm_property_add_enum() can calculate the index itself just fine, so no point in having the caller pass it in. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Manasi Navare authored
No functional changes in this patch. The SDP Header is a generic header for secondary data packets for both eDP and DP so call it dp_sdp_header. This header gets used for different SDP types already defined. Also header bytes 2 and 3 are secondary data packet specific header bytes. So change the comment to indicate the same. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Philippe CORNU authored
"make C=1" returns 2 warnings in ltdc_plane_create() ("Using plain integer as NULL pointer"). This patch fixes them. Signed-off-by:Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419132804.8317-1-philippe.cornu@st.com
-
Philippe CORNU authored
Add mode_valid() function to filter modes according to available pll clock values and "preferred" modes. It is particularly useful for hdmi modes that require precise pixel clocks. Note that "preferred" modes are always accepted: - this is important for panels because panel clock tolerances are bigger than hdmi ones and there is no reason to not accept them (the fps may vary a little but it is not a problem). - the hdmi preferred mode will be accepted too, but userland will be able to use others hdmi "valid" modes if necessary. Signed-off-by:
-
Philippe CORNU authored
When a driver related to one of the endpoints is deferred due to probe dependencies (i2c, spi...) but the other one is ready, ltdc probe continues and the deferred driver will never be probed again. The fix consists in waiting for all deferred endpoints before continuing the ltdc probe. Signed-off-by:
-
Gerd Hoffmann authored
These days drm core checks function pointers everywhere before calling them. So we can drop a bunch of dummy functions now. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
-
Gerd Hoffmann authored
The encoder callbacks are only called in case the video mode changes. So any layout changes without mode changes will go unnoticed. Add qxl_crtc_update_monitors_config(), based on the old qxl_write_monitors_config_for_encoder() function. Hook it into the enable, disable and flush atomic crtc callbacks. Remove monitors_config updates from all other places. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1544322Signed-off-by:
-
Gerd Hoffmann authored
Needed to avoid a forward declaration in a followup patch. Pure code move, no functional change. Signed-off-by:
-
Gerd Hoffmann authored
qxl_io_log() sends messages over to the host (qemu) for logging. Remove the function and all callers, we can just use standard DRM_DEBUG calls (and if needed a serial console). Signed-off-by:
-
- 26 Apr, 2018 1 commit
-
-
Philippe CORNU authored
The "adjusted_mode" clock value (ie the real pixel clock) is more accurate than "mode" clock value (ie the panel/bridge requested clock value). It offers a better preciseness for timing computations and allows to reduce the extra dsi bandwidth in burst mode (from ~20% to ~10-12%, hw platform dependent). Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
-
- 25 Apr, 2018 15 commits
-
-
Daniel Vetter authored
Bunch of ideas from Eric and me on what we could do to make gem gpu rendering drivers a notch simpler to type. v2: Fix typo (Eric). Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Kieran Bingham authored
The ADV7511 has four 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
-
Kieran Bingham authored
The ADV7511 has four 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Extend the device tree node bindings to be able to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
