- 20 Mar, 2012 1 commit
-
-
David S. Miller authored
Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Mar, 2012 39 commits
-
-
Bjørn Mork authored
Fixes: drivers/built-in.o: In function `qmi_wwan_bind_shared': qmi_wwan.c:(.text+0x25b686): undefined reference to `usb_cdc_wdm_register' make[1]: *** [.tmp_vmlinux1] Error 1 Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
-
Mugunthan V N authored
This patch adds support for TI's CPSW driver. The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. Supports 10/100/1000 Mbps. Signed-off-by:
Cyril Chemparathy <cyril@ti.com> Signed-off-by:
Sriramakrishnan A G <srk@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Mugunthan V N authored
TI CPSW ethernet switch has a built-in address lookup engine. This patch adds the code necessary for programming this module. Signed-off-by:
-
Heiko Schocher authored
Signed-off-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Eugenia Emantayev authored
Prevent race condition between commands on comm channel. Happened while unloading the driver when switching from event to polling mode. VF got completion on the last command before switching to polling mode, but toggle was not changed. After the fix - VF will not write the next command before toggle is updated. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by:
-
Peter Pan(潘卫平) authored
Liang Zheng(lzheng@redhat.com) found that in the following topo, bonding does not send igmp report when we trigger a fail-over of bonding. eth0-- |-- bond0 -- br0 eth1-- modprobe bonding mode=1 miimon=100 resend_igmp=10 ifconfig bond0 up ifenslave bond0 eth0 eth1 brctl addbr br0 ifconfig br0 192.168.100.2/24 up brctl addif br0 bond0 Add 192.168.100.2(br0) into a multicast group, like 224.10.10.10, then trigger a fali-over in bonding. You can see that parameter "resend_igmp" does not work. The reason is that when we add br0 into a multicast group, it does not propagate multicast knowledge down to its ports. If we choose to propagate multicast knowledge down to all ports for bridge, then we have to track every change that is done to bridge, and keep a backup for all ports. It is hard to track, I think. Instead I choose to modify bonding to send igmp report for its master. Changelog: V2: correct comments V3: move this check into bond_resend_igmp_join_requests() V4: only send igmp reports if bond is enslaved to a bridge Signed-off-by:Weiping Pan <panweiping3@gmail.com> Signed-off-by:
-
Vladimir Ermakov authored
Add compatible string for MPC5125 FEC. The FEC on MPC5125 additionally supports RMII PHY interface. Configure controller/PHY interface type according to the optional phy-connection-type property in the ethernet node. This property should be either "rmii" or "mii". Signed-off-by:
Vladimir Ermakov <vooon341@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by:
Matt Evans <matt@ozlabs.org> Reported-by:
Indan Zupancic <indan@nul.nu> Signed-off-by:
-
Yi Zou authored
As suggested by Ben, this adds the clarification on the usage of CHECKSUM_UNNECESSARY on the outgoing patch. Also add the usage description of NETIF_F_FCOE_CRC and CHECKSUM_UNNECESSARY for the kernel FCoE protocol driver. This is a follow-up to the following: http://patchwork.ozlabs.org/patch/147315/Signed-off-by:
Yi Zou <yi.zou@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: www.Open-FCoE.org <devel@open-fcoe.org> Signed-off-by:
-
Yi Zou authored
Fix a bug when using 'ethtool -K ethx tx off' to turn off tx ip checksum, FCoE CRC offload should not be impacte. The skb_checksum_help() is needed only if it's not FCoE traffic for ip checksum, regardless of ethtool toggling the tx ip checksum on or off. Instead of using CHECKSUM_PARTIAL, we will use CHECKSUM_UNNECESSARY as a proper indication to avoid sw ip checksum on FCoE frames. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Robert Love <robert.w.love@intel.com> Signed-off-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Yi Zou authored
This is related to fixing the bug of dropping FCoE frames when disabling tx ip checksum by 'ethtool -K ethx tx off'. The FCoE protocol stack driver would use CHECKSUM_UNNECESSARY on tx path instead of CHECKSUM_PARTIAL (as indicated in the 2/2 of this series). To do so, netif_needs_gso() has to be changed here to not do gso for both CHECKSUM_PARTIAL and CHECKSUM_UNNECESSARY. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/Signed-off-by:
-
Alexander Duyck authored
This patch allows us to avoid a Tx hang when SR-IOV is enabled. This hang can be triggered by sending small packets at a rate that was triggering Rx missed errors from the adapter while the internal Tx switch and at least one VF are enabled. This was all due to the fact that under heavy stress the Rx FIFO never drained below the flow control high water mark. This resulted in the Tx FIFO being head of line blocked due to the fact that it relies on the flow control high water mark to determine when it is acceptable for the Tx to place a packet in the Rx FIFO. The resolution for this is to set the FCRTH value to the RXPBSIZE - 32 so that even if the ring is almost completely full we can still place Tx packets on the Rx ring and drop incoming Rx traffic if we do not have sufficient space available in the Rx FIFO. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Haiyang Zhang authored
Instead of dropping the packet, we keep the skb buffer, and return NETDEV_TX_BUSY to let upper layer retry send. This will not cause endless loop, because the host is taking data away from ring buffer, and we have called the stop_queue before returning NETDEV_TX_BUSY. The stop_queue was called in the function netvsc_send() in file netvsc.c, then it returns to rndis_filter_send(), which returns to netvsc_start_xmit() in file netvsc_drv.c. So the NETDEV_TX_BUSY is indeed returned AFTER queue is stopped. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
-
-
Jeff Kirsher authored
Resolve namespace issues when FCoE or DCB is not enabled. The issue is with certain configurations we end up with namespace problems. A simple example: ixgbe_main.c - defines func A() - uses func A() ixgbe_fcoe.c - uses func A() ixgbe.h - has prototype for func A() For default (FCoE included) all is good. But when it isn't the namespace checker complains about how func A() could be static. To resolve this, created a ixgbe_lib file to contain functions used by DCB/FCoE and their helper functions so that they are always in namespace whether or not DCB/FCoE is enabled. Signed-off-by:
Phil Schmitt <phillip.j.schmitt@intel.com>
-
Joe Perches authored
Just neatening. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Remove an unnecessary #define and use memcpy instead of a loop to copy an ethernet address. Signed-off-by:
-
Joe Perches authored
No need for yet another #define for this. Convert NODE_ADDRESS_SIZE use to ETH_ALEN and remove #define. Use memcpy instead of a loop to copy an address. Signed-off-by:
-
Joe Perches authored
Just use ETH_ALEN. Signed-off-by:
-
Eric Dumazet authored
With increasing receive window sizes, but speed of light not improved that much, out of order queue can contain a huge number of skbs, waiting to be moved to receive_queue when missing packets can fill the holes. Some devices happen to use fat skbs (truesize of 4096 + sizeof(struct sk_buff)) to store regular (MTU <= 1500) frames. This makes highly probable sk_rmem_alloc hits sk_rcvbuf limit, which can be 4Mbytes in many cases. When limit is hit, tcp stack calls tcp_collapse_ofo_queue(), a true latency killer and cpu cache blower. Doing the coalescing attempt each time we add a frame in ofo queue permits to keep memory use tight and in many cases avoid the tcp_collapse() thing later. Tested on various wireless setups (b43, ath9k, ...) known to use big skb truesize, this patch removed the "packets collapsed in receive queue due to low socket buffer" I had before. This also reduced average memory used by tcp sockets. With help from Neal Cardwell. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
Split tcp_data_queue() in two parts for better readability. tcp_data_queue_ofo() is responsible for queueing incoming skb into out of order queue. Change code layout so that the skb_set_owner_r() is performed only if skb is not dropped. This is a preliminary patch before "reduce out_of_order memory use" following patch. Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yuval Mintz authored
Previously applied patch making the bnx2x statistics consistent did not apply to old FWs. This remedies it, extending the consistent behaviour to all drivers. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Dmitry Kravkov authored
This includes changes in macros to better distinguish between the two protocols, and slightly changed the way their macs are set. Notice this file contains string print lines with more than 80 characters, as to not break prints. Signed-off-by:
-
Dmitry Kravkov authored
The new error flags are supported by the bnx2x FW. Signed-off-by:
-
Dmitry Kravkov authored
The changes were mostly made to enable back-to-back data flow with dcb. Other changes were simply deemed as a better 'clean' initial configuration. Signed-off-by:
-
Yuval Mintz authored
Signed-off-by:
-
Yuval Mintz authored
This patch reduces sparse warnings in the bnx2x code, mostly by changing functions into static and changing initialization of structures. Signed-off-by:
-
Merav Sicron authored
We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by:
Merav Sicron <meravs@broadcom.com> Signed-off-by:
-
Yuval Mintz authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Ajit Khaparde authored
In flex10 mode the number of vlan slots supported is halved. Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
-
Alexander Duyck authored
This patch replaces the variable name data with the variable name features for ixgbe_fix_features and ixgbe_set_features. This helps to make some issues more obvious such as the fact that we were disabling Rx VLAN tag stripping when we should have been forcing it to be enabled when DCB is enabled. In addition there was deprecated code present that was disabling the LRO flag if we had the itr value set too low. I have updated this logic so that we will now allow the LRO flag to be set, but will not enable RSC until the rx-usecs value is high enough to allow enough time for Rx packet coalescing. Signed-off-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch adds support for enabling or disabling UDP RSS via the ethtool -N rx-flow-hash command. Signed-off-by:
-
Alexander Duyck authored
This patch contains several fixes for formatting in regards to whitespace. Signed-off-by:
-
Alexander Duyck authored
This change fixes two minor issues. The first was the fact that we were setting the return value to false twice in the set_rss_queues function. The second is the fact that we should have been using "min_t(int," instead of "min((int)" in set_fdir_queues. Signed-off-by:
-
