- 16 Mar, 2010 3 commits
-
-
Masami Hiramatsu authored
Hide CONFIG_OPTPROBES and set if the arch supports optimized kprobes (IOW, HAVE_OPTPROBES=y), since this option doesn't change the major behavior of kprobes, and workarounds for minor changes are documented. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Dieter Ries <mail@dieterries.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100315170054.31593.3153.stgit@localhost6.localdomain6> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Lin Ming authored
Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1268705556.3379.8.camel@minggr.sh.intel.com> Signed-off-by:
-
Frederic Weisbecker authored
perf_arch_fetch_caller_regs() is exported for the overriden x86 version, but not for the generic weak version. As a general rule, weak functions should not have their symbol exported in the same file they are defined. So let's export it on trace_event_perf.c as it is used by trace events only. This fixes: ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined! ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined! -v2: And also only build it if trace events are enabled. -v3: Fix changelog mistake Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com> Signed-off-by:
-
- 15 Mar, 2010 4 commits
-
-
Arnaldo Carvalho de Melo authored
Before this patch we would not find a vmlinux, then try to pass objdump "[kernel.kallsyms]" as the filename, it would get confused and produce no output: [root@doppio ~]# perf annotate n_tty_write ------------------------------------------------ Percent | Source code & Disassembly of [kernel.kallsyms] ------------------------------------------------ Now we check that and emit meaningful warning: [root@doppio ~]# perf annotate n_tty_write Can't annotate n_tty_write: No vmlinux file was found in the path: [0] vmlinux [1] /boot/vmlinux [2] /boot/vmlinux-2.6.34-rc1-tip+ [3] /lib/modules/2.6.34-rc1-tip+/build/vmlinux [4] /usr/lib/debug/lib/modules/2.6.34-rc1-tip+/vmlinux [root@doppio ~]# This bug was introduced when we added automatic search for vmlinux, before that time the user had to specify a vmlinux file. v2: Print the warning just for the first symbol found when no symbol name is specified, otherwise it will spam the screen repeating the warning for each symbol. Reported-by:Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org> LKML-Reference: <1268669073-6856-1-git-send-email-acme@infradead.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Before this patch this message would very briefly appear on the screen and then the screen would get updates only on the top, for number of interrupts received, etc, but no annotation would be performed: [root@doppio linux-2.6-tip]# perf top -s n_tty_write > /tmp/bla objdump: '[kernel.kallsyms]': No such file Now this is what the user gets: [root@doppio linux-2.6-tip]# perf top -s n_tty_write Can't annotate n_tty_write: No vmlinux file was found in the path: [0] vmlinux [1] /boot/vmlinux [2] /boot/vmlinux-2.6.33-rc5 [3] /lib/modules/2.6.33-rc5/build/vmlinux [4] /usr/lib/debug/lib/modules/2.6.33-rc5/vmlinux [root@doppio linux-2.6-tip]# This bug was introduced when we added automatic search for vmlinux, before that time the user had to specify a vmlinux file. Reported-by:
David S. Miller <davem@davemloft.net> Reported-by:
-
Eric B Munson authored
When forking its target, perf record can capture data from before the target application is started. Perf stat uses the enable_on_exec flag in the event attributes to keep from displaying events from before the target program starts, this patch adds the same functionality to perf record when it is will fork the target process. Signed-off-by:
Eric B Munson <ebmunson@us.ibm.com> Signed-off-by:
-
Cyrill Gorcunov authored
This should turn on instruction counting on P4s, which was missing in the first version of the new PMU driver. It's inaccurate for now, we still need dependant event to tag mops before we can count them precisely. The result is that the number of instruction may be lifted up. Signed-off-by:
-
- 13 Mar, 2010 2 commits
-
-
Cyrill Gorcunov authored
Ingo reported: | | There's a build failure on -tip with the P4 driver, on UP 32-bit, if | PERF_EVENTS is enabled but UP_APIC is disabled: | | arch/x86/built-in.o: In function `p4_pmu_handle_irq': | perf_event.c:(.text+0xa756): undefined reference to `apic' | perf_event.c:(.text+0xa76e): undefined reference to `apic' | So we have to unmask LVTPC only if we're configured to have one. Reported-by:
-
Arnaldo Carvalho de Melo authored
The use_browser needs to be in a file that is always built and also we need a browser__show_help stub in that case. Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
- 12 Mar, 2010 11 commits
-
-
Ingo Molnar authored
Merge reason: The new P4 driver is stable and ready now for more testing. Signed-off-by: -
Arnaldo Carvalho de Melo authored
[root@doppio ~]# perf report -i newt.data | head -10 # Samples: 11999679868 # # Overhead Command Shared Object Symbol # ........ ....... ............................. ...... # 63.61% perf libslang.so.2.1.4 [.] SLsmg_write_chars 6.30% perf perf [.] symbols__find 2.19% perf libnewt.so.0.52.10 [.] newtListboxAppendEntry 2.08% perf libslang.so.2.1.4 [.] SLsmg_write_chars@plt 1.99% perf libc-2.10.2.so [.] _IO_vfprintf_internal [root@doppio ~]# Not good, the newt form for report works, but slang has to eat the cost of the additional callgraph lines everytime it prints a line, and the callgraph doesn't appear on the screen, so move the callgraph printing to a separate function and don't use it in newt.c. Newt tree widgets are being investigated to properly support callgraphs, but till that gets merged, lets remove this huge overhead and show at least the symbol overheads for a callgraph rich perf.data with good performance. Signed-off-by: -
Arnaldo Carvalho de Melo authored
For consistency, use the newt API more fully. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
These are keys people expect when pressed to exit the current widget, so have associate all of them to this semantic. Suggested-by:
-
Arnaldo Carvalho de Melo authored
Newt has widespread availability and provides a rather simple API as can be seen by the size of this patch. The work needed to support it will benefit other frontends too. In this initial patch it just checks if the output is a tty, if not it falls back to the previous behaviour, also if newt-devel/libnewt-dev is not installed the previous behaviour is maintaned. Pressing enter on a symbol will annotate it, ESC in the annotation window will return to the report symbol list. More work will be done to remove the special casing in color_fprintf, stop using fmemopen/FILE in the printing of hist_entries, etc. Also the annotation doesn't need to be done via spawning "perf annotate" and then browsing its output, we can do better by calling directly the builtin-annotate.c functions, that would then be moved to tools/perf/util/annotate.c and shared with perf top, etc But lets go by baby steps, this patch already improves perf usability by allowing to quickly do annotations on symbols from the report screen and provides a first experimentation with libnewt/TUI integration of tools. Tested on RHEL5 and Fedora12 X86_64 and on Debian PARISC64 to browse a perf.data file collected on a Fedora12 x86_64 box. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We need those to properly size the browser widht in the newt TUI. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Just like we do for pr_debug, so that we can have a single point where to redirect to the currently used output system, be it stdio or newt. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Will be used by the newt code too. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Ingo Molnar authored
Merge reason: We want to queue up a dependent patch. Signed-off-by: -
Cyrill Gorcunov authored
In case of not assigned x86_pmu and software events NULL dereference may being hit via x86_pmu::schedule_events method. Fix it by checking if x86_pmu is initialized at all. Signed-off-by:
-
- 11 Mar, 2010 11 commits
-
-
Arnaldo Carvalho de Melo authored
[acme@mica linux-2.6-tip]$ perf record -a -f Fatal: Permission error - are you root? Consider tweaking /proc/sys/kernel/perf_event_paranoid. [acme@mica linux-2.6-tip]$ Suggested-by:
-
Arnaldo Carvalho de Melo authored
Fixing this symptom: [acme@mica linux-2.6-tip]$ perf record -a -f Fatal: Permission error - are you root? Bus error [acme@mica linux-2.6-tip]$ I.e. if for some reason no data is collected, in this case a non root user trying to do systemwide profiling, no data will be collected, and then we end up trying to mmap a zero sized file and access the file header, b00m. Reported-by:
-
Cyrill Gorcunov authored
The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by:
-
eranian@google.com authored
This patch is an optimization in perf_event_task_sched_in() to avoid scheduling the events twice in a row. Without it, the perf_disable()/perf_enable() pair is invoked twice, thereby pinned events counts while scheduling flexible events and we go throuh hw_perf_enable() twice. By encapsulating, the whole sequence into perf_disable()/perf_enable() we ensure, hw_perf_enable() is going to be invoked only once because of the refcount protection. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1268288765-5326-1-git-send-email-eranian@google.com> Signed-off-by:
-
Xiao Guangrong authored
Export perf_trace_regs and perf_arch_fetch_caller_regs since module will use these. Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> [ use EXPORT_PER_CPU_SYMBOL_GPL() ] Signed-off-by:
-
Peter Zijlstra authored
What happens is that we schedule badly like: <...>-1987 [019] 280.252808: x86_pmu_start: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252811: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252812: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252813: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252814: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252825: x86_pmu_stop: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252826: x86_pmu_stop: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252827: x86_pmu_stop: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252828: x86_pmu_stop: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252829: x86_pmu_stop: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252834: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252834: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252835: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252836: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252837: x86_pmu_start: event-51/1300c0: idx: 32 *FAIL* This happens because we only iterate the n_running events in the first pass, and reset their index to -1 if they don't match to force a re-assignment. Now, in our RR example, n_running == 0 because we fully unscheduled, so event-50 will retain its idx==32, even though in scheduling it will have gotten idx=0, and we don't trigger the re-assign path. The easiest way to fix this is the below patch, which simply validates the full assignment in the second pass. Reported-by:
-
Peter Zijlstra authored
Fix: arch/powerpc/kernel/perf_event.c:1334: error: 'power_pmu_notifier' undeclared (first use in this function) arch/powerpc/kernel/perf_event.c:1334: error: (Each undeclared identifier is reported only once arch/powerpc/kernel/perf_event.c:1334: error: for each function it appears in.) arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'power_pmu_notifier' arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'register_cpu_notifier' Due to commit 3f6da390 (perf: Rework and fix the arch CPU-hotplug hooks). Signed-off-by:
-
John Kacur authored
Without this change, the install path is relative to prefix/DESTDIR where prefix is automatically set to $HOME. This can produce unexpected results. For example: make -C tools/perf DESTDIR=/home/jkacur/tmp install-man creates the directory: /home/jkacur/home/jkacur/tmp/share/... instead of the expected: /home/jkacur/tmp/share/... Signed-off-by:
John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <1268312220-12880-1-git-send-email-jkacur@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
From : Ananth N Mavinakayanahalli <ananth@in.ibm.com> When freeing the instruction slot, the arithmetic to calculate the index of the slot in the page needs to account for the total size of the instruction on the various architectures. Calculate the index correctly when freeing the out-of-line execution slot. Reported-by:
Sachin Sant <sachinp@in.ibm.com> Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Paul Mackerras authored
At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by:
-
Paul Mackerras authored
Anton Blanchard found that he could reliably make the kernel hit a BUG_ON in the slab allocator by taking a cpu offline and then online while a system-wide perf record session was running. The reason is that when the cpu comes up, we completely reinitialize the ctx field of the struct perf_cpu_context for the cpu. If there is a system-wide perf record session running, then there will be a struct perf_event that has a reference to the context, so its refcount will be 2. (The perf_event has been removed from the context's group_entry and event_entry lists by perf_event_exit_cpu(), but that doesn't remove the perf_event's reference to the context and doesn't decrement the context's refcount.) When the cpu comes up, perf_event_init_cpu() gets called, and it calls __perf_event_init_context() on the cpu's context. That resets the refcount to 1. Then when the perf record session finishes and the perf_event is closed, the refcount gets decremented to 0 and the context gets kfreed after an RCU grace period. Since the context wasn't kmalloced -- it's part of a per-cpu variable -- bad things happen. In fact we don't need to completely reinitialize the context when the cpu comes up. It's sufficient to initialize the context once at boot, but we need to do it for all possible cpus. This moves the context initialization to happen at boot time. With this, we don't trash the refcount and the context never gets kfreed, and we don't hit the BUG_ON. Reported-by:
-
- 10 Mar, 2010 9 commits
-
-
Frederic Weisbecker authored
Drop the obsolete "profile" naming used by perf for trace events. Perf can now do more than simple events counting, so generalize the API naming. Signed-off-by: -
Frederic Weisbecker authored
We are taking a wrong regs snapshot when a trace event triggers. Either we use get_irq_regs(), which gives us the interrupted registers if we are in an interrupt, or we use task_pt_regs() which gives us the state before we entered the kernel, assuming we are lucky enough to be no kernel thread, in which case task_pt_regs() returns the initial set of regs when the kernel thread was started. What we want is different. We need a hot snapshot of the regs, so that we can get the instruction pointer to record in the sample, the frame pointer for the callchain, and some other things. Let's use the new perf_fetch_caller_regs() for that. Comparison with perf record -e lock: -R -a -f -g Before: perf [kernel] [k] __do_softirq | --- __do_softirq | |--55.16%-- __open | --44.84%-- __write_nocancel After: perf [kernel] [k] perf_tp_event | --- perf_tp_event | |--41.07%-- lock_acquire | | | |--39.36%-- _raw_spin_lock | | | | | |--7.81%-- hrtimer_interrupt | | | smp_apic_timer_interrupt | | | apic_timer_interrupt The old case was producing unreliable callchains. Now having right frame and instruction pointers, we have the trace we want. Also syscalls and kprobe events already have the right regs, let's use them instead of wasting a retrieval. v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs() Signed-off-by: -
Frederic Weisbecker authored
Events that trigger overflows by interrupting a context can use get_irq_regs() or task_pt_regs() to retrieve the state when the event triggered. But this is not the case for some other class of events like trace events as tracepoints are executed in the same context than the code that triggered the event. It means we need a different api to capture the regs there, namely we need a hot snapshot to get the most important informations for perf: the instruction pointer to get the event origin, the frame pointer for the callchain, the code segment for user_mode() tests (we always use __KERNEL_CS as trace events always occur from the kernel) and the eflags for further purposes. v2: rename perf_save_regs to perf_fetch_caller_regs as per Masami's suggestion. Signed-off-by: -
Frederic Weisbecker authored
We were using the frame pointer based stack walker on every contexts in x86-32, but not in x86-64 where we only use the seven-league boots on the exception stacks. Use it also on irq and process stacks. This utterly accelerate the captures. Signed-off-by: -
Frederic Weisbecker authored
There are rcu locked read side areas in the path where we submit a trace event. And these rcu_read_(un)lock() trigger lock events, which create recursive events. One pair in do_perf_sw_event: __lock_acquire | |--96.11%-- lock_acquire | | | |--27.21%-- do_perf_sw_event | | perf_tp_event | | | | | |--49.62%-- ftrace_profile_lock_release | | | lock_release | | | | | | | |--33.85%-- _raw_spin_unlock Another pair in perf_output_begin/end: __lock_acquire |--23.40%-- perf_output_begin | | __perf_event_overflow | | perf_swevent_overflow | | perf_swevent_add | | perf_swevent_ctx_event | | do_perf_sw_event | | perf_tp_event | | | | | |--55.37%-- ftrace_profile_lock_acquire | | | lock_acquire | | | | | | | |--37.31%-- _raw_spin_lock The problem is not that much the trace recursion itself, as we have a recursion protection already (though it's always wasteful to recurse). But the trace events are outside the lockdep recursion protection, then each lockdep event triggers a lock trace, which will trigger two other lockdep events. Here the recursive lock trace event won't be taken because of the trace recursion, so the recursion stops there but lockdep will still analyse these new events: To sum up, for each lockdep events we have: lock_*() | trace lock_acquire | ----- rcu_read_lock() | | | lock_acquire() | | | trace_lock_acquire() (stopped) | | | lockdep analyze | ----- rcu_read_unlock() | lock_release | trace_lock_release() (stopped) | lockdep analyze And you can repeat the above two times as we have two rcu read side sections when we submit an event. This is fixed in this patch by moving the lock trace event under the lockdep recursion protection. Signed-off-by: -
Arnaldo Carvalho de Melo authored
If -vv is used just the map table will be printed, -vvv will print the symbol table too, with it we can see that we have a bug where some samples are not being resolved to a map when we get them in the perf.data stream, but after we have it all processed, we can find the right map, some reordering probably is happening. Upcoming patches will provide ways to ask for most PERF_SAMPLE_ conditional samples to be taken for !PERF_RECORD_SAMPLE events too, then we'll be able to ask for PERF_SAMPLE_TIME and PERF_SAMPLE_CPU to help diagnose this. Signed-off-by:
-
Eric B Munson authored
Perf report does not handle multiple events being reported, even though perf record stores them properly on disk. This patch addresses that issue by adding the logic to perf report to use the event stream id that is saved by record and the new data structures to seperate the event streams and report them individually. Signed-off-by:
-
Eric B Munson authored
Now that report can store historgrams for multiple events we need to be able to do the post processing work for each histogram. This patch changes the post processing functions so that they can be called individually for each event's histogram. Signed-off-by:
-
Eric B Munson authored
This patch adds the structures necessary to count each event type independently in perf report. Signed-off-by:
-
