When a PCI error is detected the PCI state could be corrupt, don't save
it in that flow. Save the state after initialization. After restoring the
PCI state during slot reset save it again, restoring the state destroys
the previously saved state info.

Fixes: 05ac2c0b ('net/mlx5: Fix race between PCI error handlers and
health work')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The autogroups list is a list of non overlapping group boundaries
sorted by their start index. If the autogroups list wasn't empty
and an empty group slot was found at the start of the list,
the new group was added to the end of the list instead of the
beginning, as the prev initializer was incorrect.
When this was repeated, it caused multiple groups to have
overlapping boundaries.

Fixed that by correctly initializing the prev pointer to the
start of the list.

Fixes: eccec8da ('net/mlx5: Keep autogroups list ordered')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RxRPC ACK packet may contain an extension that includes the peer's
current Rx window size for this call.  We adjust the local Tx window size
to match.  However, the transmitter can stall if the receive window is
reduced to 0 by the peer and then reopened.

This is because the normal way that the transmitter is re-energised is by
dropping something out of our Tx queue and thus making space.  When a
single gap is made, the transmitter is woken up.  However, because there's
nothing in the Tx queue at this point, this doesn't happen.

To fix this, perform a wake_up() any time we see the peer's Rx window size
increasing.

The observable symptom is that calls start failing on ETIMEDOUT and the
following:

	kAFS: SERVER DEAD state=-62

appears in dmesg.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hwmon temperature sensor devices is registered using a devm_hwmon
API call.  The marvell_release() would then manually free the device,
not using a devm_hmon API, resulting in the device being removed
twice, leading to a crash in kernfs_find_ns() during the second
removal.

Remove the manual removal, which makes marvell_release() empty, so
remove it as well.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 0b04680f ("phy: marvell: Add support for temperature sensor")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Doug Berger says:

====================
net: bcmgenet: minor bug fixes

v2: Accidentally sent the wrong set after rebasing.

This collection contains a number of fixes for minor issues with the
bcmgenet driver most of which were present in the initial submission
of the driver.

Some bugs were uncovered by inspection prior to the upcoming update for
GENETv5 support:
  net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
  net: bcmgenet: correct MIB access of UniMAC RUNT counters
  net: bcmgenet: reserved phy revisions must be checked first
  net: bcmgenet: synchronize irq0 status between the isr and task

Others bugs were found in power management testing:
  net: bcmgenet: power down internal phy if open or resume fails
  net: bcmgenet: Power up the internal PHY before probing the MII
  net: bcmgenet: decouple flow control from bcmgenet_tx_reclaim
  net: bcmgenet: add begin/complete ethtool ops

Doug Berger (7):
  net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
  net: bcmgenet: correct MIB access of UniMAC RUNT counters
  net: bcmgenet: reserved phy revisions must be checked first
  net: bcmgenet: power down internal phy if open or resume fails
  net: bcmgenet: synchronize irq0 status between the isr and task
  net: bcmgenet: Power up the internal PHY before probing the MII
  net: bcmgenet: decouple flow control from bcmgenet_tx_reclaim

Edwin Chan (1):
  net: bcmgenet: add begin/complete ethtool ops
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The bcmgenet_tx_reclaim() function is used to reclaim transmit
resources in different places within the driver.  Most of them
should not affect the state of the transmit flow control.

This commit relocates the logic for waking tx queues based on
freed resources to the napi polling function where it is more
appropriate.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure clock is enabled for ethtool ops.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Edwin Chan <edwin.chan@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using the internal PHY it must be powered up when the MII is probed
or the PHY will not be detected.  Since the PHY is powered up at reset
this has not been a problem.  However, when the kernel is restarted with
kexec the PHY will likely be powered down when the kernel starts so it
will not be detected and the Ethernet link will not be established.

This commit explicitly powers up the internal PHY when the GENET driver
is probed to correct this behavior.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a spinlock to ensure that irq0_stat is not unintentionally altered
as the result of preemption.  Also removed unserviced irq0 interrupts
and removed irq1_stat since there is no bottom half service for those
interrupts.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the internal PHY is powered up during the open and resume
functions it should be powered back down if the functions fail.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reserved gphy_rev value of 0x01ff must be tested before the old
or new scheme for GPHY major versioning are tested, otherwise it will
be treated as 0xff00 according to the old scheme.

Fixes: b04a2f5b ("net: bcmgenet: add support for new GENET PHY revision scheme")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The gap between the Tx status counters and the Rx RUNT counters is now
being added to allow correct reporting of the registers.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The location of the RBUF overflow and error counters has moved between
different version of the GENET MAC.  This commit corrects the driver to
read from the correct locations depending on the version of the GENET
MAC.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync()
and enable_irq() when an interrupt is received to process Rx packets. If
the napi_complete_done() return value isn't checked an unbalanced enable
for the IRQ could result, generating a warning stack trace.

Update the driver to only enable interrupts if napi_complete_done() returns
true.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If rxrpc_kernel_send_data() is asked to send data through a call that has
already failed (due to a remote abort, received protocol error or network
error), then return the associated error code saved in the call rather than
ESHUTDOWN.

This allows the caller to work out whether to ask for the abort code or not
based on this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c146066a ("ipv4: Don't use ufo handling on later transformed
packets") and commit f89c56ce ("ipv6: Don't use ufo handling on
later transformed packets") added a check that 'rt->dst.header_len' isn't
zero in order to skip UFO, but it doesn't include IPcomp in transport mode
where it equals zero.

Packets, after payload compression, may not require further fragmentation,
and if original length exceeds MTU, later compressed packets will be
transmitted incorrectly. This can be reproduced with LTP udp_ipsec.sh test
on veth device with enabled UFO, MTU is 1500 and UDP payload is 2000:

* IPv4 case, offset is wrong + unnecessary fragmentation
    udp_ipsec.sh -p comp -m transport -s 2000 &
    tcpdump -ni ltp_ns_veth2
    ...
    IP (tos 0x0, ttl 64, id 45203, offset 0, flags [+],
      proto Compressed IP (108), length 49)
      10.0.0.2 > 10.0.0.1: IPComp(cpi=0x1000)
    IP (tos 0x0, ttl 64, id 45203, offset 1480, flags [none],
      proto UDP (17), length 21) 10.0.0.2 > 10.0.0.1: ip-proto-17

* IPv6 case, sending small fragments
    udp_ipsec.sh -6 -p comp -m transport -s 2000 &
    tcpdump -ni ltp_ns_veth2
    ...
    IP6 (flowlabel 0x6b9ba, hlim 64, next-header Compressed IP (108)
      payload length: 37) fd00::2 > fd00::1: IPComp(cpi=0x1000)
    IP6 (flowlabel 0x6b9ba, hlim 64, next-header Compressed IP (108)
      payload length: 21) fd00::2 > fd00::1: IPComp(cpi=0x1000)

Fix it by checking 'rt->dst.xfrm' pointer to 'xfrm_state' struct, skip UFO
if xfrm is set. So the new check will include both cases: IPcomp and IPsec.

Fixes: c146066a ("ipv4: Don't use ufo handling on later transformed packets")
Fixes: f89c56ce ("ipv6: Don't use ufo handling on later transformed packets")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lockdep issues a circular dependency warning when AFS issues an operation
through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem.

The theory lockdep comes up with is as follows:

 (1) If the pagefault handler decides it needs to read pages from AFS, it
     calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but
     creating a call requires the socket lock:

	mmap_sem must be taken before sk_lock-AF_RXRPC

 (2) afs_open_socket() opens an AF_RXRPC socket and binds it.  rxrpc_bind()
     binds the underlying UDP socket whilst holding its socket lock.
     inet_bind() takes its own socket lock:

	sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET

 (3) Reading from a TCP socket into a userspace buffer might cause a fault
     and thus cause the kernel to take the mmap_sem, but the TCP socket is
     locked whilst doing this:

	sk_lock-AF_INET must be taken before mmap_sem

However, lockdep's theory is wrong in this instance because it deals only
with lock classes and not individual locks.  The AF_INET lock in (2) isn't
really equivalent to the AF_INET lock in (3) as the former deals with a
socket entirely internal to the kernel that never sees userspace.  This is
a limitation in the design of lockdep.

Fix the general case by:

 (1) Double up all the locking keys used in sockets so that one set are
     used if the socket is created by userspace and the other set is used
     if the socket is created by the kernel.

 (2) Store the kern parameter passed to sk_alloc() in a variable in the
     sock struct (sk_kern_sock).  This informs sock_lock_init(),
     sock_init_data() and sk_clone_lock() as to the lock keys to be used.

     Note that the child created by sk_clone_lock() inherits the parent's
     kern setting.

 (3) Add a 'kern' parameter to ->accept() that is analogous to the one
     passed in to ->create() that distinguishes whether kernel_accept() or
     sys_accept4() was the caller and can be passed to sk_alloc().

     Note that a lot of accept functions merely dequeue an already
     allocated socket.  I haven't touched these as the new socket already
     exists before we get the parameter.

     Note also that there are a couple of places where I've made the accepted
     socket unconditionally kernel-based:

	irda_accept()
	rds_rcp_accept_one()
	tcp_accept_from_sock()

     because they follow a sock_create_kern() and accept off of that.

Whilst creating this, I noticed that lustre and ocfs don't create sockets
through sock_create_kern() and thus they aren't marked as for-kernel,
though they appear to be internal.  I wonder if these should do that so
that they use the new set of lock keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Misc. small fixes.

Fixes include moving the initial function reset, notifying the RDMA driver
during tx timeout, setting dcbx_cap properly depending on whether the
firmware agent is running or not, and an autoneg related improvement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In some situations, the firmware will return 0 for autoneg supported
speed.  This may happen if the firmware detects no SFP module, for
example.  The driver should ignore this so that we don't end up with
an invalid autoneg setting with nothing advertised.  When SFP module
is inserted, we'll get the updated settings from firmware at that time.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set DCB_CAP_DCBX_HOST capability flag only if the firmware LLDP agent
is not running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we call bnxt_reset_task() due to tx timeout, we should call
bnxt_ulp_stop() to inform the RDMA driver about the error and the
impending reset.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The firmware call to do function reset is done too late.  It is causing
the rings that have been reserved to be freed.  In NPAR mode, this bug
is causing us to run out of rings.

Fixes: 391be5c2 ("bnxt_en: Implement new scheme to reserve tx rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing copyright does not give any useful information on the boot
process.
Furthermore, the email address printed is obsolete since
commit ba57b6f2 ("MAINTAINERS: fix bouncing tun/tap entries")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KMSAN reports a use of uninitialized memory in put_cmsg() because
msg.msg_flags in recvfrom haven't been initialized properly.
The flag values don't affect the result on this path, but it's still a
good idea to initialize them explicitly.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: htab fixes

Two bpf hashtable fixes. See individual patches for details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

when all map elements are pre-allocated one cpu can delete and reuse htab_elem
while another cpu is still walking the hlist. In such case the lookup may
miss the element. Convert hlist to hlist_nulls to avoid such scenario.
When bucket lock is taken there is no need to take such precautions,
so only convert map_lookup and map_get_next to nulls.
The race window is extremely small and only reproducible with explicit
udelay() inside lookup_nulls_elem_raw()

Similar to hlist add hlist_nulls_for_each_entry_safe() and
hlist_nulls_entry_safe() helpers.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: Jonathan Perry <jonperry@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

when htab_elem is removed from the bucket list the htab_elem.hash_node.next
field should not be overridden too early otherwise we have a tiny race window
between lookup and delete.
The bug was discovered by manual code analysis and reproducible
only with explicit udelay() in lookup_elem_raw().

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: Jonathan Perry <jonperry@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:

/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
  __u8 pdmc_addr[MAX_ADDR_LEN];

This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:

$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
	__u8 mac[32]; /* MAX_ADDR_LEN */

There are no UAPI headers besides these two that use MAX_ADDR_LEN.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The gso code of several tunnels type (gre and udp tunnels)
takes for granted that the skb->inner_protocol is properly
initialized and drops the packet elsewhere.

On the forwarding path no one is initializing such field,
so gro encapsulated packets are dropped on forward.

Since commit 38720352 ("gre: Use inner_proto to obtain
inner header protocol"), this can be reproduced when the
encapsulated packets use gre as the tunneling protocol.

The issue happens also with vxlan and geneve tunnels since
commit 8bce6d7d ("udp: Generalize skb_udp_segment"), if the
forwarding host's ingress nic has h/w offload for such tunnel
and a vxlan/geneve device is configured on top of it, regardless
of the configured peer address and vni.

To address the issue, this change initialize the inner_protocol
field for encapsulated packets in both ipv4 and ipv6 gro complete
callbacks.

Fixes: 38720352 ("gre: Use inner_proto to obtain inner header protocol")
Fixes: 8bce6d7d ("udp: Generalize skb_udp_segment")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In qed_ll2_start_ooo() the ll2_info variable is uninitialized and then
passed to qed_ll2_acquire_connection() where it is copied into a new
memory space.

This shouldn't cause any issue as long as non of the copied memory is
every read.
But the potential for a bug being introduced by reading this memory
is real.

Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable")
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
net: thunderx: Miscellaneous fixes

This patch set fixes multiple issues such as IOMMU
translation faults when kernel is booted with IOMMU enabled
on host, incorrect MAC ID reading from ACPI tables and IPv6
UDP packet drop due to failure of checksum validation.

Changes from v1:
- As suggested by David Miller, got rid of conditional
  calling of DMA map/unmap APIs. Also updated commit message
  in 'IOMMU translation faults' patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not consider IPv6 frames with zero UDP checksum as frames
with bad checksum and drop them.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When booted with ACPI, random mac addresses are being
assigned to node1 interfaces due to mismatch of bgx_id
in BGX driver and ACPI tables.

This patch fixes this issue by setting maximum BGX devices
per node based on platform/soc instead of a macro. This
change will set the bgx_id appropriately.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When BGX/LMACs are in QSGMII mode, for some LMACs, mode info is
not being printed. This patch will fix that. With changes already
done to not do any sort of serdes 2 lane mapping config calculation
in kernel driver, we can get rid of this logic.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ACPI support has been added to ARM IOMMU driver in 4.10 kernel
and that has resulted in VNIC interfaces throwing translation
faults when kernel is booted with ACPI as driver was not using
DMA API. This patch fixes the issue by using DMA API which inturn
will create translation tables when IOMMU is enabled.

Also VNIC doesn't have a seperate receive buffer ring per receive
queue, so there is no 1:1 descriptor index matching between CQE_RX
and the index in buffer ring from where a buffer has been used for
DMA'ing. Unlike other NICs, here it's not possible to maintain dma
address to virt address mappings within the driver. This leaves us
no other choice but to use IOMMU's IOVA address conversion API to
get buffer's virtual address which can be given to network stack
for processing.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function rds_ib_setup_qp, the error handle is missing. When some
error occurs, it is possible that memory leak occurs. As such, error
handle is added.

Cc: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
  gather lists with one large consistent DMA allocation per ring

BQL is not effective here.  We reduced the ring size because there is heavy
overhead with dma_map_single every so often.  With iommu=on, dma_map_single
in PF Tx data path was taking longer time (~700usec) for every ~250
packets.  Debugged intel_iommu code, and found that PF driver is utilizing
too many static IO virtual address mapping entries (for gather list entries
and info buffers): about 100K entries for two PF's each using 8 rings.
Also, finding an empty entry (in rbtree of device domain's iova mapping in
kernel) during Tx path becomes a bottleneck every so often; the loop to
find the empty entry goes through over 40K iterations; this is too costly
and was the major overhead.  Overhead is low when this loop quits quickly.

Netperf benchmark numbers before and after patch:

PF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.52     |   0.93     |  +78.9  |
|   1    |  1024  |   1.62     |   2.84     |  +75.3  |
|        |  1518  |   2.44     |   4.21     |  +72.5  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.45     |   1.59     | +253.3  |
|   4    |  1024  |   1.34     |   5.48     | +308.9  |
|        |  1518  |   2.27     |   8.31     | +266.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.40     |   1.61     | +302.5  |
|   8    |  1024  |   1.64     |   4.24     | +158.5  |
|        |  1518  |   2.87     |   6.52     | +127.2  |
+--------+--------+------------+------------+---------+

VF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   1.28     |   1.49     |  +16.4  |
|   1    |  1024  |   4.44     |   4.39     |   -1.1  |
|        |  1518  |   6.08     |   6.51     |   +7.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   2.35     |   2.35     |    0.0  |
|   4    |  1024  |   6.41     |   8.07     |  +25.9  |
|        |  1518  |   9.56     |   9.54     |   -0.2  |
+--------+--------+------------+------------+---------+
|        |   360  |   3.41     |   3.65     |   +7.0  |
|   8    |  1024  |   9.35     |   9.34     |   -0.1  |
|        |  1518  |   9.56     |   9.57     |   +0.1  |
+--------+--------+------------+------------+---------+
Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6
than IPv4. The recent refactoring for multipath support in netlink
messages does discriminate between non-multipath which needs the OIF
and multipath which adds a rtnexthop struct for each hop making the
RTA_OIF attribute redundant. Resolve by adding a flag to the info
function to skip the oif for multipath.

Fixes: beb1afac ("net: ipv6: Add support to dump multipath routes
       via RTA_MULTIPATH attribute")
Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This warnings may be hit even in case they should not - in case user
puts a TC-flower rule which failed to be offloaded. So just remove them.
Reported-by: Petr Machata <petrm@mellanox.com>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: commit 7aa0f5aa ("mlxsw: spectrum: Implement TC flower offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KASAN detected a use-after-free:

[  269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0
[  269.467067] Read of size 4 by task ssh/1879
[  269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249
[  269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  269.467067] Call Trace:
[  269.467067]  dump_stack+0x81/0xb6
[  269.467067]  kasan_object_err+0x21/0x78
[  269.467067]  kasan_report+0x2f7/0x450
[  269.467067]  ? vrf_xmit+0x7f1/0x827 [vrf]
[  269.467067]  ? ip_output+0xa4/0xdb
[  269.467067]  __asan_load4+0x6b/0x6d
[  269.467067]  vrf_xmit+0x7f1/0x827 [vrf]
...

Which corresponds to the skb access after xmit handling. Fix by saving
skb->len and using the saved value to update stats.

Fixes: 193125db ("net: Introduce VRF device driver")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>