- 21 Jul, 2015 38 commits
-
-
Guy Mishol authored
update the rssi reading on rx_status to read both RSSI level (7 bits) and antenna diversity (msb) Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Miaoqing Pan authored
We measured the FFT-based entropy in 3 ways, Shannon entropy, collision entropy, and directly measured min-entropy. Just to be conservative, we recommend the estimated min-Entropy to be 10 bits per 16-bit value. Analysis was done by Jacobson,David(djacobso@qti.qualcomm.com). Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Miaoqing Pan authored
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Rafa? Mi?ecki authored
Broadcom's firmware requires every BSS to use MAC address with unique last few bits. The amount of bits may depend on a particular firmware, it was verified to be 2 for BCM43602 one. If this condition won't be fulfilled firmware will reject such MAC: brcmfmac: _brcmf_set_mac_address: Setting cur_etheraddr failed, -52 We don't want to simply set addr_mask as it would also disallow using locally administrated bit. Instead let's build a list of addresses manually enabling 0x2 bit for extra interfaces. Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Michal Kazior authored
While compiling ath9k with some extra flags I've found that: ath9k/xmit.c +2473 ## 16: warning: restricted __le16 degrades to integer ath9k/xmit.c +2474 ## 36: warning: invalid assignment: &= ath9k/xmit.c +2474 ## 36: left side has type restricted __le16 ath9k/xmit.c +2474 ## 36: right side has type int There's no way for frame ftype/stype to be mistreated as the offending 'moredata' flag when considering cab queue. This could've however theoretically led sometimes to increased power consumption on connected stations as they would keep their Rx active waiting for frames that would never come. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Christophe Jaillet authored
Replace a kmalloc+strcpy by an equivalent kstrdup in order to improve readability. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Larry Finger authored
In routine _rtl8821ae_set_media_status(), an incorrect mask results in a test for AP status to always be false. Similar bugs were fixed in rtl8192cu and rtl8192de, but this instance was missed at that time. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.18+] Cc: David Binderman <dcb314@hotmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Rafał Miłecki authored
Our bus should allow defining children nodes as we may want to specify devices attached to the bus. This is required e.g. to specify NAND or ChipCommon cores and use bus's address and IRQ mappings. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Aniket Nagarnaik authored
This patch fixes following issues in p2p code paths. 1) bss role, bss type and connection type was not set correctly for p2p GO and p2p client at couple of places. 2) Driver appends a proprietary header to management frames which will be parsed by our firmware. Later while informing TX status to cfg80211, modified frame buffer was passed to cfg80211_mgmt_tx_status() instead of original one. Signed-off-by: Aniket Nagarnaik <aniketn@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Felix Fietkau authored
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Raphaël Poggi authored
When wlcore_probe_of failed, return the correct error code instead of ENOMEM Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Nik Nyby authored
This fixes a typo in the "b43_lo_g_maintenance_work" function name. Signed-off-by: Nik Nyby <nikolas@gnu.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Nik Nyby authored
This fixes a typo in two comments: "paht" -> "path". Signed-off-by: Nik Nyby <nikolas@gnu.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Reyad Attiyat authored
There is an error that can occur where the driver adds the same URB to USB submission list twice. This happens since mwifiex_usb_submit_rem_rx can submit packets at same time as an rx urb complete callback. This causes list corruption and is fixed by not setting the skb to NULL when submitting an rx packet. [ 84.461242] WARNING: CPU: 1 PID: 748 at lib/list_debug.c:36 __list_add+0xcb/0xd0() [ 84.461245] list_add double add: new=ffff8800c92b0c50, prev=ffff8800c92b0c50, next=ffff8800ced6c430. [ 84.461247] Modules linked in: rfcomm fuse cmac nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bnep iptable_mangle iptable_security iptable_raw btusb btintel bluetooth mwifiex_usb mwifiex x86_pkg_temp_thermal cfg80211 coretemp r8712u(C) kvm_intel kvm hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_trigger hid_sensor_iio_common industrialio_triggered_buffer kfifo_buf rfkill iTCO_wdt industrialio iTCO_vendor_support [ 84.461316] crc32_pclmul crc32c_intel ghash_clmulni_intel microcode snd_hda_codec_realtek vfat snd_hda_codec_generic fat snd_hda_codec_hdmi snd_hda_intel snd_hda_controller uvcvideo snd_hda_codec videobuf2_vmalloc videobuf2_memops snd_hwdep videobuf2_core snd_hda_core joydev v4l2_common videodev hid_sensor_hub snd_seq hid_multitouch media snd_seq_device snd_pcm snd_timer mei_me snd i2c_i801 lpc_ich mei soundcore tpm_infineon tpm_tis tpm i2c_hid i2c_designware_platform i2c_designware_core nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel i915 i2c_algo_bit drm_kms_helper drm xhci_pci xhci_hcd ehci_pci sd_mod ehci_hcd video [ 84.461383] CPU: 1 PID: 748 Comm: kworker/u9:0 Tainted: G C 4.1.0-rc5+ #163 [ 84.461386] Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.05.0250 04/10/2015 [ 84.461396] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 84.461399] ffffffff81a8150e ffff8801174cf8e8 ffffffff817df830 0000000000000000 [ 84.461405] ffff8801174cf938 ffff8801174cf928 ffffffff810a54ba ffff8800c86bd750 [ 84.461410] ffff8800c92b0c50 ffff8800c92b0c50 ffff8800ced6c430 ffff88010c057178 [ 84.461416] Call Trace: [ 84.461421] [<ffffffff817df830>] dump_stack+0x4f/0x7b [ 84.461428] [<ffffffff810a54ba>] warn_slowpath_common+0x8a/0xc0 [ 84.461432] [<ffffffff810a5536>] warn_slowpath_fmt+0x46/0x50 [ 84.461436] [<ffffffff814109fb>] __list_add+0xcb/0xd0 [ 84.461442] [<ffffffff815c551a>] ? usb_hcd_link_urb_to_ep+0x2a/0xa0 [ 84.461446] [<ffffffff815c5570>] usb_hcd_link_urb_to_ep+0x80/0xa0 [ 84.461459] [<ffffffffa004318a>] prepare_transfer+0xaa/0x130 [xhci_hcd] [ 84.461470] [<ffffffffa0044cf7>] xhci_queue_bulk_tx+0xb7/0x7a0 [xhci_hcd] [ 84.461480] [<ffffffffa003b67f>] ? xhci_urb_enqueue+0x50f/0x660 [xhci_hcd] [ 84.461489] [<ffffffffa003b67f>] ? xhci_urb_enqueue+0x50f/0x660 [xhci_hcd] [ 84.461498] [<ffffffffa003b735>] xhci_urb_enqueue+0x5c5/0x660 [xhci_hcd] [ 84.461503] [<ffffffff815c7ad3>] usb_hcd_submit_urb+0x93/0xa70 [ 84.461507] [<ffffffff8168dde8>] ? __alloc_skb+0x78/0x1f0 [ 84.461511] [<ffffffff8168d301>] ? __kmalloc_reserve.isra.26+0x31/0x90 [ 84.461515] [<ffffffff8168ddbc>] ? __alloc_skb+0x4c/0x1f0 [ 84.461519] [<ffffffff8168ddfc>] ? __alloc_skb+0x8c/0x1f0 [ 84.461523] [<ffffffff8168badd>] ? skb_dequeue+0x5d/0x80 [ 84.461527] [<ffffffff815c987e>] usb_submit_urb+0x42e/0x5f0 [ 84.461531] [<ffffffff816931d9>] ? __alloc_rx_skb+0x39/0x100 [ 84.461536] [<ffffffffa05aa372>] mwifiex_usb_submit_rx_urb+0xb2/0x170 [mwifiex_usb] [ 84.461542] [<ffffffffa05aa5f5>] mwifiex_usb_submit_rem_rx_urbs+0x45/0x50 [mwifiex_usb] [ 84.461550] [<ffffffffa07094be>] mwifiex_rx_work_queue+0x10e/0x140 [mwifiex] [ 84.461556] [<ffffffff810c4429>] process_one_work+0x229/0x890 [ 84.461559] [<ffffffff810c438c>] ? process_one_work+0x18c/0x890 [ 84.461565] [<ffffffff810c4ae3>] worker_thread+0x53/0x470 [ 84.461569] [<ffffffff810c4a90>] ? process_one_work+0x890/0x890 [ 84.461572] [<ffffffff810cb162>] kthread+0xf2/0x110 [ 84.461577] [<ffffffff811031ad>] ? trace_hardirqs_on+0xd/0x10 [ 84.461581] [<ffffffff810cb070>] ? kthread_create_on_node+0x230/0x230 [ 84.461586] [<ffffffff817e9662>] ret_from_fork+0x42/0x70 [ 84.461590] [<ffffffff810cb070>] ? kthread_create_on_node+0x230/0x230 [ 84.461593] ---[ end trace 65103af5e6fb3444 ]--- Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
John Linville authored
Storage pointed to by gen_ie is allocated with kmalloc, but was never freed. Coverity CID #1271251 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
Amit & Nishant would be taking care of maintaining mwifiex driver here onwards on account of organizational changes. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
John Linville authored
Without this change, the code simply exits after calling mwifiex_uap_set_head_tail_ies, leving the call to mwifiex_set_mgmt_beacon_data_ies as dead code. Coverity CID #1271292 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
John Linville authored
mwifiex_set_wowlan_mef_entry attempts to free a passed-in pointer in case of an error. The only caller (mwifiex_set_mef_filter) passes that pointer as an offset into allocated memory, so any attempt to free that will not be the actual allocated pointer. Address this by changing mwifiex_set_wowlan_mef_entry to not do any free, and to cause mwifiex_set_mef_filter to do the appropriate free if the call to mwifiex_set_wowlan_mef_entry fails. Coverity CID #1295879 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Antonio Borneo authored
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: Solomon Peachy <pizza@shaftnet.org> To: Kalle Valo <kvalo@codeaurora.org> To: linux-wireless@vger.kernel.org To: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support to handle multichannel event from FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
Multichannel and DFS cannot be supported at same time. So when multichannel operation is enabled by module parameter, we enable number of channel as 2 while registering wiphy. For all other cases we advertise DFS support to cfg80211. Patch also adds support for radar detect widths parameter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support to advetise mwifiex multichannel support to cfg80211. If module parameter drcs is enabled and FW supports multichannel operation we advertise this support to cfg80211. As of now 2 simultaneous channels are supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support for setting multichannel policy as module parameter to FW. Value of 1 indicates Multichannel support is enabled and value of 0 disables it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support to extend TX Data pause for AP intefaces. Also for station role, support for pausing/unpausing all traffic when mac address parameter is BSSID is added. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support to enable data traffic only when port is open. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support for another TX queue in driver- bypass TX queue. This queue is used for sending data/mgmt packets while in disconnected state i.e. when port is yet not unblocked. TDLS setup packets would also be queued in this queue. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
It was observed that AP beacons would not reflect correct regulatory information upon starting AP in A band. This was because of missing AP config band update in set_channel of start_ap. Also we configure 11D settings info FW only for specific band. So we need to download domain info to FW even if domain remains unchanged but band is changed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch add cfg80211 tdls_chan_switch and tdls_cancel_chan_switch handler. With this handlers, mwifiex would support TDLS channel switch feature. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
TDLS link status - channel switching, off channel or base channel itself indicates that TDLS link is setup. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch enable tdls channel switch ext capability in tdls action frame, and also configure basic tdls channel switch parameters while tdls setup completed and tdls link is enabled.. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch add support for a new tdls configuration command which is used for configuration of tdls channel switch parameters. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch add support for tdls channel switch event process. We block TX queues for particular RA list depending upon channel switch state. If channel switch state is moving to base channel, we unblock RA lists for AP. If channel switch state is moving to off channel, we unblock TDLS peer RA lists. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch add new tdls status used for tdls channel switch. Driver in turn would block cmd path and data path if tdls channel switching. Data path to non tdls peer should be blocked if tdls channel switch to off-channel. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
If tx_pkts_queued is increased for tx paused receive address, tx process will be triggered for this packet. But since RA list was tx paused, there will be an infinite loop in mwifiex_wmm_process_tx waiting for the event(tx pause, tdls cs) to cancel tx pause. This will be an dead loop, since main_process was locked at this time, there will be no opportunity to process event. So do not increase tx_pkts_queued if receive address tx paused, this will be restored RA list is unpaused. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
Data traffic to tx paused receive address should be blocked. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Avinash Patil authored
This patch adds support to enable TX data pause feature for mwifiex. Whenever FW TX buffers reach threshold, FW would send TX pause event to driver. Driver in turn would block data traffic to that particular receiver address. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Taehee Yoo authored
In the rtlwifi/rtl8192cu, rtl8723 code is dead code. So I remove it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Major changes in ath10k: * enable VHT for IBSS * initial work to support qca99x0 and the corresponding 10.4 firmware branch
-
- 11 Jul, 2015 2 commits
-
-
Zefir Kurtisi authored
FCC long pulse radar (type 5) requires pulses to be checked for chirping. This patch implements chirp detection based on the FFT data provided for long pulses. A chirp is detected when a set of criteria defined by FCC pulse characteristics is met, including * have at least 4 FFT samples * max_bin index moves equidistantly between samples * the gradient is within defined range The chirp detection has been tested with reference radar generating devices and proved to work reliably. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Zefir Kurtisi authored
The chip reports radar pulses on extension channel even if operating in HT20 mode. This patch adds a sanity check for HT40 mode before it feeds pulses on extension channel to the pattern detector. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-