- 16 Sep, 2019 6 commits
-
-
Benjamin Gaignard authored
Fix warnings when W=1. No code changes, only clean up in sti internal structures and functions descriptions. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190909101254.24191-1-benjamin.gaignard@st.com
-
Yannick Fertré authored
In order to better support video non-burst modes, the +20% on pll out is added only in burst mode. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Reviewed-by:
-
Brian Masney authored
The i2c_new_dummy() function is deprecated since it returns NULL on error. Change this to use the recommended replacement i2c_new_dummy_device() that returns an error code that can be read with PTR_ERR() and friends. Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-5-masneyb@onstation.org
-
Brian Masney authored
Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log. Signed-off-by:
-
Brian Masney authored
Add support for the 7808 variant. While we're here, the of match table was missing support for the 7812 and 7818 variants, so add them as well. Signed-off-by:
-
Brian Masney authored
Add support for the analogix,anx7808, analogix,anx7812, and analogix,anx7818 variants. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 13 Sep, 2019 4 commits
-
-
Laurent Pinchart authored
The documentation for most of the bridge atomic operations incorrectly reference the non-atomic version when stating the operations are optional. Fix them, and make sure that all references to bridge operations are correctly marked with @. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Yakir Yang authored
When transmitting IEC60985 linear PCM audio, we configure the Aduio Sample Channel Status information in the IEC60958 frame. The status bit is already available in iec.status of hdmi_codec_params. This fix the issue that audio does not come out on some monitors (e.g. LG 22CV241) Note that these registers are only for interfaces: I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA (AHBAUDDMA). For S/PDIF interface this information comes from the stream. Currently this function dw_hdmi_set_channel_status is only called from dw-hdmi-i2s-audio in I2S setup. Signed-off-by:
Yakir Yang <ykk@rock-chips.com> Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190911082646.134347-1-cychiang@chromium.org
-
David Riley authored
Fix warning introduced with commit e1218b8c ("drm/virtio: Use vmalloc for command buffer allocations.") from drm-misc-next. Signed-off-by:
David Riley <davidriley@chromium.org> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190912160048.212495-1-davidriley@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
Signed-off-by:
-
- 12 Sep, 2019 6 commits
-
-
Thomas Zimmermann authored
The statement's condition is always true. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Thomas Zimmermann authored
The init, cleanup and mmap functions of VRAM MM are only used internally. Remove them from the public interface. v2: * update for debugfs support Signed-off-by:
-
Thomas Zimmermann authored
VRAM MM and GEM VRAM buffer objects are only used with each other; connected via 3 function pointers. Simplify this code by making the memory manager call the rsp. functions of the BOs directly; and remove the functions from the BO's public interface. v2: * typos in commit message Signed-off-by:
-
Thomas Zimmermann authored
The separation between GEM VRAM objects and the memory manager is artificial, as they are only used with each other. Copying both implementations into the same file is a first step to simplifying the code. This patch only moves code without functional changes. v3: * update to use dev->vma_offset_manager v2: * update for debugfs support * typos in commit message Signed-off-by:
-
David Riley authored
Userspace requested command buffer allocations could be too large to make as a contiguous allocation. Use vmalloc if necessary to satisfy those allocations. Signed-off-by:
-
David Riley authored
Factor function in preparation to generating scatterlist prior to locking. Signed-off-by:
-
- 11 Sep, 2019 8 commits
-
-
Gerd Hoffmann authored
No users left. Drivers either setup vma_offset_manager themself (vmwgfx) or pass the gem vma_offset_manager to ttm_bo_device_init (all other drivers). Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-9-kraxel@redhat.com
-
Gerd Hoffmann authored
Add struct drm_vma_offset_manager to vma_private, initialize it and pass it to ttm_bo_device_init(). With this in place the last user of ttm's embedded vma offset manager is gone and we can remove it (in a separate patch). Signed-off-by:
Thomas Hellström <thellstrom@vmware.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-8-kraxel@redhat.com
-
Gerd Hoffmann authored
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it instead of its own embedded struct. This makes some gem functions (specifically drm_gem_object_lookup) work on ttm objects. Signed-off-by:
-
Gerd Hoffmann authored
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it instead of its own embedded struct. This makes some gem functions (specifically drm_gem_object_lookup) work on ttm objects. Signed-off-by:
-
Gerd Hoffmann authored
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it instead of its own embedded struct. This makes some gem functions (specifically drm_gem_object_lookup) work on ttm objects. Signed-off-by:
-
Gerd Hoffmann authored
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it instead of its own embedded struct. This makes some gem functions (specifically drm_gem_object_lookup) work on ttm objects. Signed-off-by:
-
Gerd Hoffmann authored
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it instead of its own embedded struct. This makes some gem functions (specifically drm_gem_object_lookup) work on ttm objects. Signed-off-by:
-
Gerd Hoffmann authored
Rename the embedded struct vma_offset_manager, new name is _vma_manager. ttm_bo_device.vma_manager changed to a pointer. The ttm_bo_device_init() function gets an additional vma_manager argument which allows to initialize ttm with a different vma manager. When passing NULL the embedded _vma_manager is used. All callers are updated to pass NULL, so the behavior doesn't change. Signed-off-by:
-
- 10 Sep, 2019 7 commits
-
-
Gerd Hoffmann authored
select isn't recursive, so we can't turn on DRM_TTM + DRM_TTM_HELPER in config DRM_VRAM_HELPER, we have to select them on the vram users instead. Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Switch qxl to use drm_gem_object_funcs callbacks instead of drm_driver callbacks. Signed-off-by:
-
Gerd Hoffmann authored
Wire up drm_mm_print() for vram helpers, using a new debugfs file, so one can see how vram is used: # cat /sys/kernel/debug/dri/0/vram-mm 0x0000000000000000-0x0000000000000300: 768: used 0x0000000000000300-0x0000000000000600: 768: used 0x0000000000000600-0x0000000000000900: 768: used 0x0000000000000900-0x0000000000000c00: 768: used 0x0000000000000c00-0x0000000000004000: 13312: free total: 16384, used 3072 free 13312 Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Now with ttm_buffer_object being a subclass of drm_gem_object we can easily lookup ttm_buffer_object for a given drm_gem_object, which in turn allows to create common helper functions. This patch starts off with a drm_gem_ttm_print_info() helper function which adds some ttm specific lines to the debug output. Signed-off-by:
-
Gerd Hoffmann authored
New helper to print named bits of some value (think flags fields). Signed-off-by:
-
- 09 Sep, 2019 8 commits
-
-
Thomas Zimmermann authored
Frequent mapping and unmapping a buffer object adds overhead for modifying the page table and creates debug output. Unmapping a buffer is only required when the memory manager evicts the buffer from its current location. v4: * WARN_ON if buffer is still mapped during BO cleanup Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190906122056.32018-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
This patch prepares VRAM helpers for lazy unmapping of buffer objects. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of vmap() is a combined pin() and kmap(). As both functions share the same lock, we can make vmap() slightly faster by acquiring the lock only once for both operations. Same for the inverse, vunmap(). Signed-off-by:
-
Thomas Zimmermann authored
The kmap and kunmap operations of GEM VRAM buffers can now be called in interleaving pairs. The first call to drm_gem_vram_kmap() maps the buffer's memory to kernel address space and the final call to drm_gem_vram_kunmap() unmaps the memory. Intermediate calls to these functions increment or decrement a reference counter. This change allows for keeping buffer memory mapped for longer and minimizes the amount of changes to TLB, page tables, etc. v4: * lock in kmap()/kunmap() with ttm_bo_reserve() Signed-off-by:
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_cec_adap_(un)register() functions to (un)register the notifier for the CEC adapter. Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Tested-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Changes since v7: - err_runtime_disable -> err_rpm_disable Changes since v2: - removed unnecessary call to invalidate phys address before deregistering the notifier, - use cec_notifier_phys_addr_invalidate instead of setting invalid address on a notifier. Signed-off-by:
-
Hans Verkuil authored
Set the connector info for the CEC adapter. This helps userspace to associate the CEC device with the HDMI connector. Tested on a Cubieboard. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-3-hverkuil-cisco@xs4all.nl
-
Yannick Fertré authored
The implementation of functions encoder_enable and encoder_disable make possible to control the pinctrl according to the encoder type. The pinctrl must be activated only if the encoder type is DPI. This helps to move the DPI-related pinctrl configuration from all the panel or bridge to the LTDC dt node. Reviewed-by:
-
- 08 Sep, 2019 1 commit
-
-
Laurent Pinchart authored
The OSD070T1718 is a DPI panel, set its type accordingly. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904133723.30418-1-laurent.pinchart@ideasonboard.com
-
